Chemical Transformation of B- to A-type Proanthocyanidins and 3D Structural Implications.

In nature, proanthocyanidins (PACs) with A-type linkages are relatively rare, likely due to biosynthetic constraints in the formation of additional ether bonds to be introduced into the more common B-type precursors. However, A-type linkages confer greater structural rigidity on PACs than do B-type linkages. Prior investigations into the structure-activity relationships (SAR) describing how plant-derived PACs with B- and complex AB-type linkages affect their capacity for dentin biomodification indicate that a higher ratio of double linkages leads to a greater interaction with dentin type I collagen. Thus, A-type PACs emerge as particularly intriguing candidates for interventional functional biomaterials. This study employed a free-radical-mediated oxidation using DPPH to transform trimeric and tetrameric B-type PACs, 2 and 4, respectively, into their exclusively A-type linked analogues, 3 and 5, respectively. The structures and absolute configurations of the semisynthetic products, including the new all-A-type tetramer 5, were determined by comprehensive spectroscopic analysis. Additionally, molecular modeling investigated the conformational characteristics of all trimers and tetramers, 1-5. Our findings suggest that the specific interflavan linkages significantly impact the flexibility and low-energy conformations of the connected monomeric units, which conversely can affect the bioactive conformations relevant for dentin biomodification.

Development of Centrifugal Partition Chromatography for the Purification of Antibody-Drug Conjugates.

Monoclonal antibody-drug conjugates (ADCs) are an expanding therapeutic class of biomolecules for which relatively few analytical and preparative separation options exist. Purification of ADCs with a specific drug antibody ratio is even more challenging. We report the first application of countercurrent separation (CCS) to this problem. An ADC mimic was successfully chromatographed using an aqueous two-phase system (ATPS) consisting of PEG 1000/sodium citrate pH 7.5/water, 17.75/17.75/64.50 (w/w/w). Notably, different partition coefficients (K) in this ATPS for the ADC mimic (0.09 < K < 0.16) and its monoclonal antibody backbone, IgG (0.16 < K < 0.27), were observed using CCS. Differential elution behavior of such high-molecular-weight biomolecules, 146,441 vs. ∼150,000 Da, using CCS has no precedent. The results provide a proof of concept for further exploration of the application of ATPSs and CCS to the separation of ADCs.

Unprecedented Benzoquinone Motifs Reveal Post-Oligomerizational Modification of Proanthocyanidins.

Proanthocyanidins (PACs) are complex flavan-3-ol polymers with stunning chemical complexity due to oxygenation patterns, oxidative phenolic ring linkages, and intricate stereochemistry of their heterocycles and inter-flavan linkages. Being promising candidates for dental restorative biomaterials, trace analysis of dentin bioactive cinnamon PACs now yielded novel trimeric (1 and 2) and tetrameric (3) PACs with unprecedented o- and p-benzoquinone motifs (benzoquinonoid PACs). Challenges in structural characterization, especially their absolute configuration, prompted the development of a new synthetic-analytical approach involving comprehensive spectroscopy, including NMR with quantum mechanics-driven 1H iterative functionalized spin analysis (HifSA) plus experimental and computational electronic circular dichroism (ECD). Vital stereochemical information was garnered from synthesizing 4-(2,5-benzoquinone)flavan-3-ols and a truncated analogue of trimer 2 as ECD models. Discovery of the first natural benzoquinonoid PACs provides new evidence to the experimentally elusive PAC biosynthesis as their formation requires two oxidative post-oligomerizational modifications (POMs) that are distinct and occur downstream from both quinone-methide-driven oligomerization and A-type linkage formation. While Nature is known to achieve structural diversity of many major compound classes by POMs, this is the first indication of PACs also following this common theme.

Proanthocyanidin Tetramers and Pentamers from Cinnamomum verum Bark and Their Dentin Biomodification Bioactivities.

To enable the further exploration of structure-activity relationships (SARs) of proanthocyanidins (PACs) with dentin biomodification abilities, Cinnamomum verum was selected for scaled-up purification of mixed A-/B-type, medium-size PAC oligomers. Sequential purification by centrifugal partition chromatography (CPC), Sephadex LH-20, and semiprep HPLC chromatography yielded four underivatized tetrameric (5-8) and two pentameric (9-10) PACs. Their unambiguous structural characterization involved extensive spectral and chemical degradation approaches to show that epicatechin units are connected by plant-specific combinations of doubly linked A- and singly linked B-type interflavanyl bonds. The biomechanical properties (via dynamic mechanical analysis) and physicochemical structure (via infrared spectroscopy) were assessed to evaluate the biomodification potency of PAC-treated collagen in a preclinical dentin model. This study revealed that (4→8) versus (4→6) bonds in PAC interflavan linkages have limited influence on biomechanical outcomes of dentin. By exhibiting a 25-fold increase in the complex modulus of treated dentin compared to control, aesculitannin E (5) was found to be the most potent PAC known to date for enhancing the mechanical properties of dentin in this preclinical model.

Seco B-Type Oligomers from Pinus massoniana Expand the Procyanidin Chemical Space and Exhibit Dental Bioactivity.

Investigation of a pine bark extract for bioactive proanthocyanidin oligomers resulted in the isolation of structurally related dimeric seco B-type procyanidin derivatives, 1-5. This includes scalemic mixtures of gambiriin A1 (1a) and A2 (2a) and their newly described optical antipodes, ent-gambiriin A1 (1b) and ent-gambiriin A2 (2b), respectively, as well as a racemic mixture of the newly described (ent-)gambiriin A5 (3a/3b). Furthermore, the study now fully characterizes the previously reported optically pure dimers gambiriin B1 (4) and gambirflavan D1 (5), and characterized the novel seco B-type procyanidin trimer, 6 (gambirifuran C1). Thermal conversion of catechin in aqueous solution provided further evidence for the structures of 1-6 and led to the purification of semisynthetic 1a and 2a as well as additional dimers 7-10. Elucidating the structures of the natural dimers, 1-5, from comprehensive NMR and ECD data and synthetic evidence provided crucial reference points for establishing the structure of the seco B-type procyanidin trimer, 6. Serving as assigned building blocks, data from the dimers supported the 3D structural assignment of 6 based on NMR substituent chemical shift differences (s.c.s., syn. ΔδC) and component-based empirical ECD calculations. Within the newly characterized series of PAC-related molecules, 5 exhibited high dentin biomodification potential. In addition, considering the nomenclature issues and plausible biosynthetic pathways of this group of compounds led to a consolidated nomenclature of all currently known seco B-type procyanidins. These findings, thereby, expand the chemical space of bioactive catechin oligomers, which have promise as agents for the natural enhancement of dental biomaterials. Finally, the current knowledge of the chemical space of seco B-type procyanidin derivatives was compiled to the level of absolute configuration.

Galloylated proanthocyanidins in dentin matrix exhibit biocompatibility and induce differentiation in dental stem cells.

Aim: Grape seed extract contains a complex mixture of proanthocyanidins (PACs), a plant biopolymer used as a biomaterial to improve reparative and preventive dental therapies. Co-polymerization of PACs with type I collagen mechanically reinforces the dentin extracellular matrix. This study assessed the biocompatibility of PACs from grape seed extract on dental pulp stem cells (DPSCs) in a model simulating leaching through dentin to the pulp cavity. The aim was to determine the type of PACs (galloylated vs. non-galloylated) within grape seed extract that are most compatible with dental pulp tissue. Methodology: Human demineralized dentin was treated with selectively-enriched dimeric PACs prepared from grape seed extract using liquid-liquid chromatography. DPSCs were cultured within a 2D matrix and exposed to PAC-treated dentin extracellular matrix. Cell proliferation was measured using the MTS assay and expression of odontoblastic genes was analyzed by qRT-PCR. Categorization of PACs leaching from dentin was performed using HPLC-MS. Results: Enriched dimeric fractions containing galloylated PACs increased the expression of certain odontoblastic genes in DPSCs, including Runt-related transcription factor 2 (RUNX2), vascular endothelial growth factor (VEGF), bone morphogenetic protein 2 (BMP2), basic fibroblast growth factor (FGF2), dentin sialophosphoprotein (DSPP) and collagen, type I, alpha 1 (COLI). Galloylated dimeric PACs also exhibited minor effects on DPSC proliferation, resulting in a decrease compared to control after five days of treatment. The non-galloylated dimer fraction had no effect on these genes or on DPSC proliferation. Conclusions: Galloylated PACs are biocompatible with DPSCs and may exert a beneficial effect on cells within dental pulp tissue. The observed increase in odontoblastic genes induced by galloylated PACs together with a decrease in DPSC proliferation is suggestive of a shift toward cell differentiation. This data supports the use of dimeric PACs as a safe biomaterial, with galloylated dimeric PACs exhibiting potential benefits to odontoblasts supporting dentin regeneration.

Silica Gel-mediated Oxidation of Prenyl Motifs Generates Natural Product-Like Artifacts.

Prenyl moieties are commonly encountered in the natural products of terpenoid and mixed biosynthetic origin. The reactivity of unsaturated prenyl motifs is less recognized and shown here to affect the acyclic Rhodiola rosea monoterpene glycoside, kenposide A (8: ), which oxidizes readily on silica gel when exposed to air. The major degradation product mediated under these conditions was a new aldehyde, 9: . Exhibiting a shortened carbon skeleton formed through the breakdown of the terminal isopropenyl group, 9: is prone to acetalization in protic solvents. Further investigation of minor degradation products of both 8: and 8-prenylapigenin (8-PA, 12: ), a flavonoid with an ortho-prenyl substituent, revealed that the aldehyde formation was likely realized through epoxidation and subsequent cleavage at the prenyl olefinic bond. Employment of 1H NMR full spin analysis (HiFSA) achieved the assignment of all chemical shifts and coupling constants of the investigated terpenoids and facilitated the structural validation of the degradation product, 9: . This study indicates that prenylated compounds are generally susceptible to oxidative degradation, particularly in the presence of catalytic mediators, but also under physiological conditions. Such oxidative artifact/metabolite formation leads to a series of compounds with prenyl-derived (cyclic) partial structures that are analogous to species formed during Phase I metabolism in vivo. Phytochemical and pharmacological studies should take precautions or at least consider the impact of (unavoidable) exposure of prenyl-containing compounds to catalytic and/or oxidative conditions.

Tri- and Tetrameric Proanthocyanidins with Dentin Bioactivities from Pinus massoniana.

Guided by dentin biomechanical bioactivity, this phytochemical study led to the elucidation of an extended set of structurally demanding proanthocyanidins (PACs). Unambiguous structure determination involved detailed spectroscopic and chemical characterization of four A-type dimers (2 and 4-6), seven trimers (10-16), and six tetramers (17-22). New outcomes confirm the feasibility of determining the absolute configuration of the catechol monomers in oligomeric PACs by one-dimensional (1D) and two-dimensional (2D) NMR. Electronic circular dichroism as well as phloroglucinolysis followed by mass spectrometry and chiral phase high-performance liquid chromatography (HPLC) analysis generated the necessary chiral reference data. In the context of previously reported dentin-bioactive PACs, accurately and precisely assigned 13C NMR resonances enabled absolute stereochemical assignments of PAC monomers via (i) inclusion of the 13C NMR γ-gauche effect and (ii) determination of differential 13C chemical shift values (ΔδC) in comparison with those of the terminal monomer (unit II) in the dimers 2 and 4-6. Among the 13 fully elucidated PACs, eight were identified as new, and one structure (11) was revised based on new knowledge gained regarding the subtle, stereospecific spectroscopic properties of PACs.

Targeting Trimeric and Tetrameric Proanthocyanidins of Cinnamomum verum Bark as Bioactives for Dental Therapies.

The present study elucidated the structures of three A-type tri- and tetrameric proanthocyanidins (PACs) isolated from Cinnamomum verum bark to the level of absolute configuration and determined their dental bioactivity using two therapeutically relevant bioassays. After selecting a PAC oligomer fraction via a biologically diverse bioassay-guided process, in tandem with centrifugal partition chromatography, phytochemical studies led to the isolation of PAC oligomers that represent the main bioactive principles of C. verum: two A-type tetrameric PACs, epicatechin-(2ß→O→7,4ß→8)-epicatechin-(4ß→6)-epicatechin-(2ß→O→7,4ß→8)-catechin (1) and parameritannin A1 (2), together with a trimer, cinnamtannin B1 (3). Structure determination of the underivatized proanthocyanidins utilized a combination of HRESIMS, ECD, 1D/2D NMR, and 1H iterative full spin analysis data and led to NMR-based evidence for the deduction of absolute configuration in constituent catechin and epicatechin monomeric units.

Proanthocyanidin Dimers and Trimers from Vitis vinifera Provide Diverse Structural Motifs for the Evaluation of Dentin Biomodification.

Aimed at exploring the dentin biomodification potential of proanthocyanidins (PACs) for the development of dental biomaterials, this study reports the phytochemical and dental evaluation of nine B-type PACs from grape seed extract (GSE). Out of seven isolated dimers (1-7), four new compounds (2, 3, 5, and 6) involved relatively rare ent-catechin or ent-epicatechin monomeric flavan-3-ol units. Low-temperature NMR analyses conducted along with phloroglucinolysis and electronic circular dichroism enabled unequivocal structural characterization and stereochemical assignment. Additionally, one known (8) and one new (9) B-type trimer were characterized. Differential 13C NMR chemical shifts (Δδ) were used to determine the absolute configuration of 9, relative to the dimers 1 and 2 as the possible constituent subunits. Compared to the dimers, the trimers showed superior dentin biomodification properties. The dimers, 1-7, exhibited pronounced differences in their collagenase inhibitory activity, while enhancing dentin stiffness comparably. This suggests that PAC structural features such as the degree of polymerization, relative and absolute configuration have a differential influence on enhancement of dentin biomechanical and biostability. As mechanical enhancement to dentin and resistance to proteolytic biodegradation are both essential properties functional and stable dentin substrate, the structurally closely related PACs suggest a new metric, the dentin biomodification potential (DBMP) that may rationalize both properties.

Absolute Configuration of Native Oligomeric Proanthocyanidins with Dentin Biomodification Potency.

The structurally complex oligomeric proanthocyanidins (OPACs) are promising biomimetic agents, capable of strengthening the macromolecular backbone of teeth via intermolecular and intermicrofibrillar cross-linking. This study establishes analytical methods capable of determining the absolute configuration of the catechin-type monomeric units of underivatized OPACs. This preserves the capacity of their biological evaluation, aimed at understanding the inevitably stereospecific interactions between the OPACs and dentin collagen. Guided by dental bioassays (modulus of elasticity, long-term stability), two new trimeric and tetrameric A-type OPACs were discovered as dentin biomodifiers from pine (Pinus massoniana) bark: epicatechin-(2ß→O→7,4ß→8)-epicatechin-(2ß→O→7,4ß→8)-catechin (5) and epicatechin-(2ß→O→7,4ß→8)-epicatechin-(2ß→O→7,4ß→6)-epicatechin-(2ß→O→7,4ß→8)-catechin (6), respectively. Combining 1D/2D NMR, HRESIMS, ECD, 1H iterative full spin analysis (HiFSA), and gauge-invariant atomic orbital (GIAO) δ calculations, we demonstrate how 13C NMR chemical shifts (diastereomeric building blocks (A-type dimers)) empower the determination of the absolute configuration of monomeric units in the higher oligomers 5 and 6. Collectively, NMR with ECD reference data elevates the level of structural information achievable for these structurally demanding molecules when degradation analysis is to be avoided. Considering their numerous and deceptively subtle, but 3D impactful, structural variations, this advances the probing of OPAC chemical spaces for species that bind selectively to collagenous and potentially other biologically important biomacromolecules.

Subtle Chemical Shifts Explain the NMR Fingerprints of Oligomeric Proanthocyanidins with High Dentin Biomodification Potency.

The ability of certain oligomeric proanthocyanidins (OPACs) to enhance the biomechanical properties of dentin involves collagen cross-linking of the 1.3-4.5 nm wide space via protein-polyphenol interactions. A systematic interdisciplinary search for the bioactive principles of pine bark has yielded the trimeric PAC, ent-epicatechin-(4ß→8)-epicatechin-(2ß→O→7,4ß→8)-catechin (3), representing the hitherto most potent single chemical entity capable of enhancing dentin stiffness. Building the case from two congeneric PAC dimers, a detailed structural analysis decoded the stereochemistry, spatial arrangement, and chemical properties of three dentin biomodifiers. Quantum-mechanics-driven (1)H iterative full spin analysis (QM-HiFSA) of NMR spectra distinguished previously unrecognized details such as higher order J coupling and provided valuable information about 3D structure. Detection and quantification of H/D-exchange effects by QM-HiFSA identified C-8 and C-6 as (re)active sites, explain preferences in biosynthetic linkage, and suggest their involvement in dentin cross-linking activity. Mapping of these molecular properties underscored the significance of high δ precision in both (1)H and (13)C NMR spectroscopy. Occurring at low- to subppb levels, these newly characterized chemical shift differences in ppb are small but diagnostic measures of dynamic processes inherent to the OPAC pharmacophores and can help augment our understanding of nanometer-scale intermolecular interactions in biomodified dentin macromolecules.

Mimicking the hierarchical functions of dentin collagen cross-links with plant derived phenols and phenolic acids.

Proanthocyanidins (PACs) are secondary plant metabolites that mediate nonenzymatic collagen cross-linking and enhance the properties of collagen based tissue, such as dentin. The extent and nature of cross-linking is influenced by the composition and specific chemical structure of the bioactive compounds present in certain PAC-rich extracts. This study investigated the effect of the molecular weight and stereochemistry of polyphenol compounds on two important properties of dentin, biomechanics, and biostability. For that, purified phenols, a phenolic acid, and some of its derivatives were selected: PAC dimers (A1, A2, B1, and B2) and a trimer (C1), gallic acid (Ga), its esters methyl-gallate (MGa) and propyl-gallate (PGa), and a pentagalloyl ester of glucose (PGG). Synergism was assessed by combining the most active PAC and gallic acid derivative. Mechanical properties of dentin organic matrix were determined by the modulus of elasticity obtained in a flexural test. Biostability was evaluated by the resistance to collagenase degradation. PACs significantly enhanced dentin mechanical properties and decreased collagen digestion. Among the gallic acid derivatives, only PGG had a significant enhancing effect. The lack of observed C1:PGG synergy indicates that both compounds have similar mechanisms of interaction with the dentin matrix. These findings reveal that the molecular weight of polyphenols have a determinant effect on their interaction with type I collagen and modulates the mechanism of cross-linking at the molecular, intermolecular, and inter-microfibrillar levels.

Modulatory role of terminal monomeric flavan-3-ol units in the viscoelasticity of dentin.

Flavan-3-ol monomers are the building blocks of proanthocyanidins (PACs), natural compounds from plants shown to mediate specific biologic activities on dentin. While the stereochemistry of the terminal flavan-3-ols, catechin (C) versus epicatechin (EC), impacts the biomechanical properties of the dentin matrix treated with oligomeric PACs, structure-activity relationships driving this bioactivity remain elusive. To gain insights into the modulatory role of the terminal monomers, two highly congruent trimeric PACs from Pinus massoniana only differing in the stereochemistry of the terminal unit (Trimer-C vs. Trimer-EC) were prepared to evaluate their chemical characteristics as well as their effects on the viscoelasticity and biostability of biomodified dentin matrices via infrared spectroscopy and multi-scale dynamic mechanical analyses. The subtle alteration of C versus EC as terminal monomers lead to distinct immediate PAC-trimer biomodulation of the dentin matrix. Nano- and micro-dynamic mechanical analyses revealed that Trimer-EC increased the complex moduli (0.51 GPa) of dentin matrix more strongly than Trimer-C (0.26 GPa) at the nanoscale length (p < 0.001), whereas the reverse was found at the microscale length (p < .001). The damping capacity (tan δ) of dentin matrix decreased by 70% after PAC treatment at the nano-length scale, while increased values were found at the micro-length scale (~0.24) compared to the control (0.18 ; p < .001). An increase in amide band intensities and a decrease of complex moduli was observed after storage in simulated body fluid for both Trimer-C and Trimer-EC modified dentin. The stereochemical configuration of the terminal monomeric units, C and EC, did not impact the chemo-mechanical stability of dentin matrix.

Prodelphinidins enhance dentin matrix properties and promote adhesion to methacrylate resin.

OBJECTIVE: Investigate the bioactivity and stability of Rhodiola rosea (RR) fractions as a natural source of prodelphinidin gallate (PDg) on dentin collagen via analysis of the viscoelastic and resin-dentin adhesive properties of the dentin matrix. METHODS: The biomimicry and stability of RR subfractions (F1, F2, F3 and F4) with collagen were determined by dynamic mechanical analysis (DMA). DMA used a strain sweep method to assess the dentin matrix viscoelastic properties [storage (E'), loss (E"), and complex (E*) moduli and tan δ] after treatment, 7-, 30- and 90-days of storage in simulated body fluids (SBF). Resin-dentin interface properties were assessed after 1 and 90-days in SBF by microtensile bond strength test and confocal laser scanning microscopy. Data were analyzed using two and one-way ANOVA and post-hoc tests (α = 0.05). RESULTS: RR fractions increased dentin matrix complex (96 - 69 MPa) and storage (95 - 68 MPa) moduli, compared to the control (∼9 MPa) in the ranking order: F2 ≥ F3 = F1 = F4 > control (p < 0.001). Treatment did not affect tan δ values. After 30- and 90-days, RR-treated dentin E*, E' and tan δ decreased (p < 0.001). F2 fraction yielded the highest microtensile bond strength (43.9 MPa), compared to F1, F4 (35.9 - 31.7 MPa), and control (29 MPa). RR-treated interfaces mediated stable surface modifications and enhanced collagen-methacrylate resin interactions at the bioadhesive interface. SIGNIFICANCE: Prodelphinidin gallates from RR are potent and reasonably stable biomimetic agents to dentin. Higher potency of F2 fraction with the dentin matrix and the adhesive interface is associated with a degree of polymerization of 2-3 and gallo(yl) motifs.

Paradoxical effects of galloyl motifs in the interactions of proanthocyanidins with collagen-rich dentin.

Plant-derived proanthocyanidins (PACs) mediate physicochemical modifications to the dentin extracellular matrix (ECM). The structure-activity relationships of PACs remain largely unknown, mostly due to the varied complex composition of crude extracts, as well as the challenges of purification and mechanistic assessment. To assess the role of galloylated PACs as significant contributors to high yet unstable biomodification activity to the dentin ECM, we removed the galloyl moieties (de-galloylation) via enzymatic hydrolysis from three galloyl-rich PAC-containing extracts (Camellia sinensis, Vitis vinifera, and Hamamelis virginiana). The biomechanical and biological properties of dentin were assessed upon treatment with these extracts vs. their de-galloylated counterparts. An increase in the complex modulus of the dentin matrix was found with all extracts, however, the crude extract was significantly higher when compared to the de-galloylated version. Exhibiting the highest content of galloylated PACs among the investigated plants, Camellia sinensis crude extract also exhibited the biggest relapse in mechanical properties after one-month incubation. De-galloylation did not modify the damping capacity of dentin ECM. Moreover, PAC-mediated protection against proteolytic degradation was unaffected by de-galloylation. The de-galloylation experiments confirmed that gallic acid in galloylated rich-PAC extracts drive stronger yet significantly less sustained mechanical effects in dentin ECM.

B-type Proanthocyanidins with Dentin Biomodification Activity from Cocoa (Theobroma cacao).

To enable translational studies, a scalable preparative isolation scheme was developed for underivatized cocoa (Theobroma cacao) proanthocyanidins (PACs), affording six all-B-type oligomeric PACs, including a new tetramer 4. Their structures, including absolute configuration, were unambiguously established by comprehensive spectroscopic and chemical methods. Evaluation of the PACs' dentin biomodification properties employed dynamic mechanical and infrared spectroscopic analyses in dentin bioassay models. PAC treatment enhanced the biomechanical strength of dentin by 5- to 15-fold compared to untreated dentin. Among the PAC agents, the pentamer, cinnamtannin A3 (6), led to the highest complex modulus value of 131 MPa, whereas the "branched" tetramer, 4, showed the lowest, yet still significant bioactivity. This study of specifically singly linked medium-length oligomeric PACs indicates that the linkage site is paramount in determining the potency of these PACs as dentin biomodifiers.

Unveiling structure-activity relationships of proanthocyanidins with dentin collagen.

OBJECTIVE: To elucidate the structure-activity relationships (SARs) of proanthocyanidins (PACs) with type I collagen using sixteen chemically defined PACs with degree of polymerization (DP) 2-6. METHODS: Under a dentin model, the biomimicry of PACs with type I collagen was investigated by dynamic mechanical analysis (DMA) and infrared spectroscopy. The dentin matrix was modified with PACs from Pinus massoniana [monomers (Mon-1 and Mon-2), dimers (Dim-1-Dim-4), trimers (Tri-1-Tri-4), tetramers (Tet-1-Tet-5), and hexamer (Hex-1)]. A strain sweep method in a 3-point bending submersion clamp was used to assess the viscoelastic properties [storage (E'), loss (E"), and complex moduli (E*) and tan δ] of the dentin matrix before and after biomodification. Biochemical analysis of the dentin matrix was assessed with FTIR spectroscopy. Data were statistically analyzed using one-way ANOVA and post-hoc tests (α = 0.05). RESULTS: DP had a significant effect on modified dentin moduli (tetramers ≈ trimers > hexamers ≈ dimers > monomers ≈ control, p < 0.001). Trimers and tetramers yielded 6- to 8-fold increase in the mechanical properties of modified dentin and induced conformational changes to the secondary structure of collagen. Modifications to the tertiary structure of collagen was shown in all PAC modified-dentin matrices. SIGNIFICANCE: Findings establish three key SARs: (i) increasing DP generally enhances biomimicry potential of PACs in modulating the mechanical and chemical properties of dentin (ii) the secondary structure of dentin collagen is affected by the position of B-type inter-flavanyl linkages (4ß â†’ 6 and 4ß â†’ 8); and (iii) the terminal monomeric flavan-3-ol unit plays a modulatory role in the viscoelasticity of dentin.

Rare A-Type, Spiro-Type, and Highly Oligomeric Proanthocyanidins from Pinus massoniana.

An investigation of the dental bioactive proanthocyanidin (PAC) oligomer fractions led to three structurally distinct new PACs (1-3) from pine bark. Pinutwindoublin (1) is the first reported trimer with double A-type interflavanyl linkages (2α→O→5,4α→6 and 2α→O→7,4α→8). Pinuspirotetrin (2) represents the first reported PAC tetramer with a heterodimeric framework consisting of one spiro-type and one A-type dimer. Pinumassohexin (3) was elucidated as a mixed A + B-type hexamer that consists of a peanut-derived tetramer, peanut procyanidin E, and an A-type dimer (5). Compound 3 increased the modulus of elasticity of dentin by an impressive 4.3 times at a concentration of 0.65%.

Effect of dentin biomodification delivered by experimental acidic and neutral primers on resin adhesion.

OBJECTIVES: Proanthocyanidins (PACs) are biocompounds mimicking native collagen cross-links. The effective and practical delivery of any biocompound is pivotal for clinical usage. The aim was to investigate the dentin biomodification and effective formation of dentin-resin biointerfaces of two highly bioactive PAC-rich extracts, Vitis vinifera (Vv) and Camellia sinensis (Cs), delivered using neutral (NP) or acidic (AP) rinse-out primer approaches. METHODS: The depth of dentin demineralization (optical profilometry), dentin biomodification (apparent modulus of elasticity, collagen auto-fluorescence) and properties of dentin-resin interfaces (microtensile bond strength - µTBS, and micro-permeability) were investigated. NP consisted of either 15% Vv or Cs applied for 60 s after surface etching; while AP contained 15% Vv or Cs in either 35% glycolic acid or tartaric acid applied for 30 s or 60 s. Data were analyzed using ANOVA and post-hoc tests (α = 0.05). RESULTS: The depth of demineralization was statistically higher when applied for 60 s, regardless of rinse-out primer approach (p < 0.001). Compared to the AP strategy, NP exhibited statistically higher apparent modulus of elasticity, regardless of PAC extract (p < 0.001). Highest µTBS were obtained for NPVv, which were statistically similar to APGAVv, when applied for 60 s (p < 0.001); both resulted in a dramatic decrease of the interfacial permeability. NPCs group showed the lowest µTBS (p < 0.001). CONCLUSIONS: A combination of high bond strength and low micro-permeability can be accomplished using glycolic acid with the mid- and high-PAC oligomer enriched extract (Vv). Cs extract containing mostly catechins and dimeric PACs, was found unsuitable for resin-dentin adhesion despite exhibiting high initial dentin biomodification. CLINICAL SIGNIFICANCE: This study provides a new conceptual delivery of PAC-mediated dentin biomodification and conservative dentin surface etching using rinse-out primers. The strategy requires a specific combination of PAC source, α-hydroxy acid, and application time.