RESUMEN
Since the advent of additive manufacturing, known commonly as 3D printing, this technology has revolutionized the biofabrication landscape and driven numerous pivotal advancements in tissue engineering and regenerative medicine. Many 3D printing methods were developed in short course after Charles Hull first introduced the power of stereolithography to the world. However, materials development was not met with the same enthusiasm and remained the bottleneck in the field for some time. Only in the past decade has there been deliberate development to expand the materials toolbox for 3D printing applications to meet the true potential of 3D printing technologies. Herein, we review the development of biomaterials suited for light-based 3D printing modalities with an emphasis on bioprinting applications. We discuss the chemical mechanisms that govern photopolymerization and highlight the application of natural, synthetic, and composite biomaterials as 3D printed hydrogels. Because the quality of a 3D printed construct is highly dependent on both the material properties and processing technique, we included a final section on the theoretical and practical aspects behind light-based 3D printing as well as ways to employ that knowledge to troubleshoot and standardize the optimization of printing parameters.
Asunto(s)
Materiales Biocompatibles/química , Luz , Impresión Tridimensional , Ingeniería de Tejidos , Materiales Biocompatibles/síntesis química , Investigación Biomédica , Humanos , Procesos Fotoquímicos , PolimerizacionRESUMEN
Extracorporeal devices have great promise for cleansing the body of virulence factors that are caused by venomous injuries, bacterial infections, and biological weaponry. The clinically used extracorporeal devices, such as artificial liver-support systems that are mainly based on dialysis or electrostatic interaction, are limited to remove a target toxin. Here, a liver-mimetic device is shown that consists of decellularized liver scaffold (DLS) populated with polydiacetylene (PDA) nanoparticles. DLS has the gross shape and 3D architecture of a liver, and the PDA nanoparticles selectively capture and neutralize the pore-forming toxins (PFTs). This device can efficiently and target-orientedly remove PFTs in human blood ex vivo without changing blood components or activating complement factors, showing potential application in antidotal therapy. This work provides a proof-of-principle for blood detoxification by a nanoparticle-activated DLS, and can lead to the development of future medical devices for antidotal therapy.
Asunto(s)
Inactivación Metabólica , Hígado/citología , Nanopartículas/química , Andamios del Tejido/química , Animales , Biomimética , Humanos , Nanopartículas/ultraestructura , Polímero Poliacetilénico , Polímeros/química , Poliinos/química , Ratas , Soluciones , Toxinas Biológicas/aislamiento & purificaciónRESUMEN
Stem cells regulate their fate by binding to, and contracting against, the extracellular matrix. Recently, it has been proposed that in addition to matrix stiffness and ligand type, the degree of coupling of fibrous protein to the surface of the underlying substrate, that is, tethering and matrix porosity, also regulates stem cell differentiation. By modulating substrate porosity without altering stiffness in polyacrylamide gels, we show that varying substrate porosity did not significantly change protein tethering, substrate deformations, or the osteogenic and adipogenic differentiation of human adipose-derived stromal cells and marrow-derived mesenchymal stromal cells. Varying protein-substrate linker density up to 50-fold changed tethering, but did not affect osteogenesis, adipogenesis, surface-protein unfolding or underlying substrate deformations. Differentiation was also unaffected by the absence of protein tethering. Our findings imply that the stiffness of planar matrices regulates stem cell differentiation independently of protein tethering and porosity.
Asunto(s)
Proteínas de la Matriz Extracelular/fisiología , Matriz Extracelular/fisiología , Células Madre/citología , Células Madre/fisiología , Adipogénesis , Materiales Biocompatibles , Fenómenos Biomecánicos , Fenómenos Biofísicos , Adhesión Celular , Diferenciación Celular/fisiología , Movimiento Celular , Células Cultivadas , Dimetilpolisiloxanos , Módulo de Elasticidad , Humanos , Hidrogeles , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/fisiología , Microscopía de Fuerza Atómica , Porosidad , Células del Estroma/citología , Células del Estroma/fisiologíaRESUMEN
Access to unlimited numbers of live human neurons derived from stem cells offers unique opportunities for in vitro modeling of neural development, disease-related cellular phenotypes, and drug testing and discovery. However, to develop informative cellular in vitro assays, it is important to consider the relevant in vivo environment of neural tissues. Biomimetic 3D scaffolds are tools to culture human neurons under defined mechanical and physico-chemical properties providing an interconnected porous structure that may potentially enable a higher or more complex organization than traditional two-dimensional monolayer conditions. It is known that even minor variations in the internal geometry and mechanical properties of 3D scaffolds can impact cell behavior including survival, growth, and cell fate choice. In this report, we describe the design and engineering of 3D synthetic polyethylene glycol (PEG)-based and biodegradable gelatin-based scaffolds generated by a free form fabrication technique with precise internal geometry and elastic stiffnesses. We show that human neurons, derived from human embryonic stem (hESC) cells, are able to adhere to these scaffolds and form organoid structures that extend in three dimensions as demonstrated by confocal and electron microscopy. Future refinements of scaffold structure, size and surface chemistries may facilitate long term experiments and designing clinically applicable bioassays.
Asunto(s)
Células Madre Embrionarias/citología , Células Madre Embrionarias/ultraestructura , Neuronas/citología , Andamios del Tejido/química , Materiales Biomiméticos/química , Adhesión Celular , Células Cultivadas , Diseño de Equipo , Gelatina/química , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Microscopía Confocal , Microscopía Electrónica de Rastreo , Polietilenglicoles/químicaRESUMEN
Volumetric muscle loss (VML) injuries due to trauma, tumor ablation, or other degenerative muscle diseases are debilitating and currently have limited options for self-repair. Advancements in 3D printing allow for the rapid fabrication of biocompatible scaffolds with designer patterns. However, the materials chosen are often stiff or brittle, which is not optimal for muscle tissue engineering. This study utilized a photopolymerizable biocompatible elastomer - poly (glycerol sebacate) acrylate (PGSA) - to develop an in vitro model of muscle regeneration and proliferation into an acellular scaffold after VML injury. Mechanical properties of the scaffold were tuned by controlling light intensity during the 3D printing process to match the specific tension of skeletal muscle. The effect of both geometric (channel sizes between 300 and 600 µm) and biologic (decellularized muscle extracellular matrix (dECM)) cues on muscle progenitor cell infiltration, proliferation, organization, and maturation was evaluated in vitro using a near-infrared fluorescent protein (iRFP) transfected cell line to assess cells in the 3D scaffold. Larger channel sizes and dECM coating were found to enhance cell proliferation and maturation, while no discernable effect on cell alignment was observed. In addition, a pilot experiment was carried out to evaluate the regenerative capacity of this scaffold in vivo after a VML injury. Overall, this platform demonstrates a simple model to study muscle progenitor recruitment and differentiation into acellular scaffolds after VML repair.
Asunto(s)
Elastómeros , Enfermedades Musculares , Humanos , Elastómeros/farmacología , Ingeniería de Tejidos , Impresión Tridimensional , Enfermedades Musculares/patología , Músculo Esquelético , RegeneraciónRESUMEN
The field of tissue engineering and regenerative medicine will tremendously benefit from the development of three dimensional scaffolds with defined micro- and macro-architecture that replicate the geometry and chemical composition of native tissues. The current report describes a freeform fabrication technique that permits the development of nerve regeneration scaffolds with precisely engineered architecture that mimics that of native nerve, using the native extracellular matrix component hyaluronic acid (HA). To demonstrate the flexibility of the fabrication system, scaffolds exhibiting different geometries with varying pore shapes, sizes and controlled degradability were fabricated in a layer-by-layer fashion. To promote cell adhesion, scaffolds were covalently functionalized with laminin. This approach offers tremendous spatio-temporal flexibility to create architecturally complex structures such as scaffolds with branched tubes to mimic branched nerves at a plexus. We further demonstrate the ability to create bidirectional gradients within the microfabricated nerve conduits. We believe that combining the biological properties of HA with precise three dimensional micro-architecture could offer a useful platform for the development of a wide range of bioartificial organs.
Asunto(s)
Ácido Hialurónico/química , Microtecnología/métodos , Regeneración Nerviosa , Andamios del Tejido , Materiales Biocompatibles/química , Adhesión Celular , Células Cultivadas , Compuestos Epoxi/química , Matriz Extracelular/química , Humanos , Imagenología Tridimensional/métodos , Metacrilatos/química , Tejido Nervioso/química , Tejido Nervioso/citología , Ingeniería de Tejidos/métodosRESUMEN
Functional vasculature is crucial for the maintenance of living tissues via the transport of oxygen, nutrients, and metabolic waste products. As a result, insufficient vascularization in thick engineered tissues will lead to cell death and necrosis due to mass transport and diffusional constraints. To circumvent these limitations, we describe the development of a microscale continuous optical bioprinting (µCOB) platform for 3D printing complex vascularized tissues with superior resolution and speed. By using the µCOB system, endothelial cells and other supportive cells can be printed directly into hydrogels with precisely controlled distribution and subsequent formation of lumen-like structures in vitro.
Asunto(s)
Materiales Biocompatibles/síntesis química , Bioimpresión/métodos , Vasos Sanguíneos/citología , Regeneración Tisular Dirigida/instrumentación , Ingeniería de Tejidos/instrumentación , Andamios del Tejido/química , Animales , Órganos Bioartificiales , Materiales Biocompatibles/química , Circulación Sanguínea/fisiología , Células Cultivadas , Células Endoteliales/citología , Células Endoteliales de la Vena Umbilical Humana , Humanos , Hidrogeles/síntesis química , Hidrogeles/química , Ratones Endogámicos C3H , Neovascularización Fisiológica/fisiología , Impresión TridimensionalRESUMEN
Glioblastoma (GBM) is the most prevalent and lethal adult primary central nervous system cancer. An immunosuppresive and highly heterogeneous tumor microenvironment, restricted delivery of chemotherapy or immunotherapy through the blood-brain barrier (BBB), together with the brain's unique biochemical and anatomical features result in its universal recurrence and poor prognosis. As conventional models fail to predict therapeutic efficacy in GBM, in vitro 3D models of GBM and BBB leveraging patient- or healthy-individual-derived cells and biomaterials through 3D bioprinting technologies potentially mimic essential physiological and pathological features of GBM and BBB. 3D-bioprinted constructs enable investigation of cellular and cell-extracellular matrix interactions in a species-matched, high-throughput, and reproducible manner, serving as screening or drug delivery platforms. Here, an overview of current 3D-bioprinted GBM and BBB models is provided, elaborating on the microenvironmental compositions of GBM and BBB, relevant biomaterials to mimic the native tissues, and bioprinting strategies to implement the model fabrication. Collectively, 3D-bioprinted GBM and BBB models are promising systems and biomimetic alternatives to traditional models for more reliable mechanistic studies and preclinical drug screenings that may eventually accelerate the drug development process for GBM.
Asunto(s)
Materiales Biocompatibles , Bioimpresión/métodos , Barrera Hematoencefálica , Glioblastoma , Impresión Tridimensional , HumanosRESUMEN
Digital light processing (DLP)-based three-dimensional (3D) printing technology has the advantages of speed and precision comparing with other 3D printing technologies like extrusion-based 3D printing. Therefore, it is a promising biomaterial fabrication technique for tissue engineering and regenerative medicine. When printing cell-laden biomaterials, one challenge of DLP-based bioprinting is the light scattering effect of the cells in the bioink, and therefore induce unpredictable effects on the photopolymerization process. In consequence, the DLP-based bioprinting requires extra trial-and-error efforts for parameters optimization for each specific printable structure to compensate the scattering effects induced by cells, which is often difficult and time-consuming for a machine operator. Such trial-and-error style optimization for each different structure is also very wasteful for those expensive biomaterials and cell lines. Here, we use machine learning to learn from a few trial sample printings and automatically provide printer the optimal parameters to compensate the cell-induced scattering effects. We employ a deep learning method with a learning-based data augmentation which only requires a small amount of training data. After learning from the data, the algorithm can automatically generate the printer parameters to compensate the scattering effects. Our method shows strong improvement in the intra-layer printing resolution for bioprinting, which can be further extended to solve the light scattering problems in multilayer 3D bioprinting processes.
Asunto(s)
Bioimpresión , Aprendizaje Profundo , Materiales Biocompatibles , Bioimpresión/métodos , Impresión Tridimensional , Ingeniería de Tejidos/métodos , Andamios del Tejido/químicaRESUMEN
We demonstrate a new technique for selectively growing gold nanoparticles on a patterned three-dimensional (3D) polymer microstructure. The technique integrates 3D direct writing of heterogeneous microstructures with nanoparticle synthesis. A digital micromirror device is employed as a dynamic mask in the digital projection photopolymerization process to build the heterogeneous microstructure layer by layer. An amine-bearing polyelectrolyte, branched poly(ethylenimine), is selectively attached to the microstructure and acts as both a reducing and a protective agent in the nanoparticle synthesis. Scanning electron microscopy, energy dispersive x-ray spectroscopy and x-ray photoelectron spectroscopy are utilized to analyze the microstructure and the 3D selectivity of the nanoparticle growth.
Asunto(s)
Electroquímica/métodos , Oro/química , Nanopartículas del Metal/química , Nanoestructuras/química , Nanotecnología/métodos , Polímeros/química , Microscopía Electrónica de RastreoRESUMEN
Nerve conduits provide an advanced tool for repairing the injured peripheral nerve that often causes disability and mortality. Currently, the efficiency of conduits in repairing peripheral nerve is unsatisfying. Here, we show a functional nanoparticle-enhanced nerve conduit for promoting the regeneration of peripheral nerves. This conduit, which consists of gelatin-methacryloyl (GelMA) hydrogels with drug loaded poly(ethylene glycol)- poly(3-caprolactone) (MPEG-PCL) nanoparticles dispersed in the hydrogel matrix, is rapidly fabricated by a continuous three-dimensional (3D) printing process. While the 3D-printed hydrogel conduit with customized size, shape and structure provides a physical microenvironment for axonal elongation, the nanoparticles sustained release the drug to facilitate the nerve regeneration. The drug, 4-((5,10-dimethyl-6-oxo-6,10-dihydro-5H-pyrimido[5,4-b]thieno[3,2-e][1,4]diazepin-2-yl)amino) benzenesulfonamide, is a Hippo pathway inhibitor with multiple functions including improving the proliferation and migration of Schwann cells and up-regulating neurotrophic factors genes. The descried functional nerve conduit efficiently induced the recovery of sciatic injuries in morphology, histopathology and functions in vivo, showing the potential clinical application in peripheral nerve repair. STATEMENTS OF SIGNIFICANCE: Functional nerve conduit provides a promising strategy alternative to autografts. In this work, we rapidly customized a nanoparticle-enhanced conduit by the continuous bioprinting process. This nanoparticle in the conduit can release a Hippo pathway inhibitor to facilitate the nerve regeneration and function restoration. The efficacy of the conduits is comparable to that of autograft, suggesting the potential clinical applications.
Asunto(s)
Bioimpresión , Nanopartículas/química , Regeneración Nerviosa , Células de Schwann/metabolismo , Nervio Ciático/fisiología , Andamios del Tejido/química , Animales , Línea Celular , Gelatina/química , Gelatina/farmacología , Células Endoteliales de la Vena Umbilical Humana , Humanos , Masculino , Poliésteres/química , Poliésteres/farmacología , Polietilenglicoles/química , Polietilenglicoles/farmacología , Impresión Tridimensional , Ratas , Ratas Sprague-DawleyRESUMEN
Polycarbonates are widely used in food packages, drink bottles, and various healthcare products such as dental sealants and tooth coatings. However, bisphenol A (BPA) and phosgene used in the production of commercial polycarbonates pose major concerns to public health safety. Here, we report a green pathway to prepare BPA-free polycarbonates (BFPs) by thermal ring-opening polymerization and photopolymerization. Polycarbonates prepared from two cyclic carbonates in different mole ratios demonstrated tunable mechanical stiffness, excellent thermal stability, and high optical transparency. Three-dimensional (3D) printing of the new BFPs was demonstrated using a two-photon laser direct writing system and a rapid 3D optical projection printer to produce structures possessing complex high-resolution geometries. Seeded C3H10T1/2 cells also showed over 95% viability with potential applications in biological studies. By combining biocompatible BFPs with 3D printing, novel safe and high-performance biomedical devices and healthcare products could be developed with broad long-term benefits to society.
Asunto(s)
Cemento de Policarboxilato/química , Compuestos de Bencidrilo , Fenoles , Impresión TridimensionalRESUMEN
Hepatocellular carcinoma (HCC), as the fifth most common malignant cancer, develops and progresses mostly in a cirrhotic liver where stiff nodules are separated by fibrous bands. Scaffolds that can provide a 3D cirrhotic mechanical environment with complex native composition and biomimetic architecture are necessary for the development of better predictive tissue models. Here, we developed photocrosslinkable liver decellularized extracellular matrix (dECM) and a rapid light-based 3D bioprinting process to pattern liver dECM with tailorable mechanical properties to serve as a platform for HCC progression study. 3D bioprinted liver dECM scaffolds were able to stably recapitulate the clinically relevant mechanical properties of cirrhotic liver tissue. When encapsulated in dECM scaffolds with cirrhotic stiffness, HepG2 cells demonstrated reduced growth along with an upregulation of invasion markers compared to healthy controls. Moreover, an engineered cancer tissue platform possessing tissue-scale organization and distinct regional stiffness enabled the visualization of HepG2 stromal invasion from the nodule with cirrhotic stiffness. This work demonstrates a significant advancement in rapid 3D patterning of complex ECM biomaterials with biomimetic architecture and tunable mechanical properties for in vitro disease modeling.
Asunto(s)
Bioimpresión/métodos , Matriz Extracelular/química , Hígado/química , Andamios del Tejido/química , Materiales Biocompatibles/química , Fenómenos Biomecánicos , Bioimpresión/economía , Proliferación Celular , Supervivencia Celular , Progresión de la Enfermedad , Células Hep G2 , Humanos , Hígado/citología , Hígado/patología , Hígado/ultraestructura , Neoplasias Hepáticas/patología , Impresión Tridimensional/economía , Factores de TiempoRESUMEN
A stereolithography-based bioprinting platform for multimaterial fabrication of heterogeneous hydrogel constructs is presented. Dynamic patterning by a digital micromirror device, synchronized by a moving stage and a microfluidic device containing four on/off pneumatic valves, is used to create 3D constructs. The novel microfluidic device is capable of fast switching between different (cell-loaded) hydrogel bioinks, to achieve layer-by-layer multimaterial bioprinting. Compared to conventional stereolithography-based bioprinters, the system provides the unique advantage of multimaterial fabrication capability at high spatial resolution. To demonstrate the multimaterial capacity of this system, a variety of hydrogel constructs are generated, including those based on poly(ethylene glycol) diacrylate (PEGDA) and gelatin methacryloyl (GelMA). The biocompatibility of this system is validated by introducing cell-laden GelMA into the microfluidic device and fabricating cellularized constructs. A pattern of a PEGDA frame and three different concentrations of GelMA, loaded with vascular endothelial growth factor, are further assessed for its neovascularization potential in a rat model. The proposed system provides a robust platform for bioprinting of high-fidelity multimaterial microstructures on demand for applications in tissue engineering, regenerative medicine, and biosensing, which are otherwise not readily achievable at high speed with conventional stereolithographic biofabrication platforms.
Asunto(s)
Microfluídica , Animales , Bioimpresión , Hidrogel de Polietilenoglicol-Dimetacrilato , Ratas , Ingeniería de Tejidos , Andamios del Tejido , Factor A de Crecimiento Endotelial VascularRESUMEN
Cell interfacing with biomaterial surfaces dictates important aspects of cell behavior. In particular, axon extension in neurons is effectively influenced by surface properties, both for the initial formation of an axon as well as for the maintenance of axon growth. Here, we investigated how neurons behaved on poly(dimethyl siloxane) (PDMS) surfaces decorated with biochemical and physical cues presented individually or in combination. In particular, nerve growth factor (NGF) was covalently tethered to PDMS to create a bioactive surface, and microtopography was introduced to the material in the form of microchannels. Embryonic hippocampal neurons were used to investigate the impact of these surface cues on polarization (i.e., axon initiation or axogenesis) and overall axon length. We found that topography had a more pronounced effect on polarization (68% increase over controls) compared to immobilized NGF (0.1 ng/mm(2)) (27% increase). However, the effect of NGF was negligible when both types of stimuli were simultaneously presented on the biomaterial surface. In addition to axon formation, chemical and physical cues are also involved in axon growth following the initiation process. Interestingly, for the same studies described above, the effects of microchannels and NGF were opposite from the effects on polarization; the most evident effect was for the immobilized growth factor (10% increase in axon length with respect to controls) whereas there was no effect in general for the microtopography. More importantly, when the two surface stimuli were presented in combination, a synergistic increase in axon length was detected (25% increase with respect to controls), which could be a result of faster polarization triggered by topography plus enhanced growth from NGF. Additionally, axon orientation was also analyzed and we found the well-known tendency of perpendicular or parallel axonal alignment to be dependent on the width and depth of the channels. This investigation thoroughly compared and distinguished the individual and combined impact of material surface properties (chemical and physical) on axogenesis from the effects on axon length. Overall, topography dominated polarization mechanisms, whereas NGF, and particularly a synergy of immobilized NGF plus topography, dominated axon length. These results could be potentially applied for the design of biomaterials in applications were axon growth is critical.
Asunto(s)
Axones/metabolismo , Hipocampo/efectos de los fármacos , Factores de Crecimiento Nervioso/farmacología , Regeneración Nerviosa/efectos de los fármacos , Animales , Axones/efectos de los fármacos , Materiales Biocompatibles/química , Células Cultivadas , Hipocampo/citología , Proteínas InmovilizadasRESUMEN
Tissue engineering is replete with methods for inducing and mediating cell differentiation, which are crucial for ensuring proper regrowth of desired tissues. In this study, we developed a 3D-printed, non-positive Poisson's Ratio (NPPR) scaffold intended for future use in stretch-mediated cell differentiation applications, such as in muscle and tendon regeneration. We utilized dynamic optical projection stereolithography (DOPsL) to fabricate multi-layered, cell-laden NPPR scaffolds - these scaffolds can not only support aggregate cell growth, but can also be printed with locally-tunable force-displacement properties at length scales appropriate for tissue interaction. These NPPR multilayered mesh scaffolds can be embedded into highly elastic hydrogels in order to couple a reduced NPPR behavior to a normally Positive Poisson's Ratio (PPR) solid bulk material. This hybrid structure may potentially enable induced 'auxetic' behavior at the single-cell scale while tuning the Poisson's Ratio to a more isolated value. This would be uniquely suited for providing stretch-mediated effects for various cell-types within the tendon-to-muscle tissue transition.
Asunto(s)
Materiales Biocompatibles/química , Impresión Tridimensional , Animales , Fenómenos Mecánicos , Ratones , Modelos Moleculares , Conformación Molecular , Procesos Fotoquímicos , Polimerizacion , Poliuretanos/químicaRESUMEN
Our ability to create precise, pre-designed, spatially patterned biochemical and physical microenvironments inside polymer scaffolds could provide a powerful tool in studying progenitor cell behavior and differentiation under biomimetic, three-dimensional (3D) culture conditions. We have developed a simple and fast, layer-by-layer microstereolithography system consisting of an ultra-violet light source, a digital micro-mirror masking device, and a conventional computer projector, that allows fabrication of complex internal features along with precise spatial distribution of biological factors inside a single scaffold. Photo-crosslinkable poly(ethylene glycol) diacrylates were used as the scaffold material, and murine bone marrow-derived cells were successfully encapsulated or seeded on fibronectin-functionalized scaffolds. Fluorescently-labeled polystyrene microparticles were used to show the capability of this system to create scaffolds with complex internal architectures and spatial patterns. We demonstrate that precisely controlled pore size and shapes can be easily fabricated using a simple, computer-aided process. Our results further indicate that multi-layered scaffolds with spatially distributed factors in the same layer or across different layers can be efficiently manufactured using this technique. These microfabricated scaffolds are conducive for osteogenic differentiation of marrow-derived stem cells, as indicated by efficient matrix mineralization.
Asunto(s)
Materiales Biocompatibles , Ingeniería , Animales , Materiales Biocompatibles/química , Materiales Biocompatibles/metabolismo , Diferenciación Celular , Células Cultivadas , Ingeniería/instrumentación , Ingeniería/métodos , Ensayo de Materiales , Ratones , Ratones Endogámicos BALB C , Osteogénesis/fisiología , Células Madre/citología , Células Madre/fisiología , Propiedades de Superficie , Ingeniería de Tejidos/instrumentación , Ingeniería de Tejidos/métodosRESUMEN
3D printing is emerging as a powerful tool for tissue engineering by enabling 3D cell culture within complex 3D biomimetic architectures. This review discusses the prevailing 3D printing techniques and their most recent applications in building tissue constructs. The work associated with relatively well-known inkjet and extrusion-based bioprinting is presented with the latest advances in the fields. Emphasis is put on introducing two relatively new light-assisted bioprinting techniques, including digital light processing (DLP)-based bioprinting and laser based two photon polymerization (TPP) bioprinting. 3D bioprinting of vasculature network is particularly discussed for its foremost significance in maintaining tissue viability and promoting functional maturation. Limitations to current bioprinting approaches, as well as future directions of bioprinting functional tissues are also discussed.
Asunto(s)
Bioimpresión/métodos , Impresión Tridimensional/instrumentación , Ingeniería de Tejidos/instrumentación , Ingeniería de Tejidos/métodos , Animales , Materiales Biocompatibles , Biomimética , Humanos , Andamios del TejidoRESUMEN
Developing functional small-diameter vascular grafts is an important objective in tissue engineering research. In this study, we address the problem of compliance mismatch by designing and developing a 3D tubular construct that has a negative Poisson's ratio νxy (NPR). NPR constructs have the unique ability to expand transversely when pulled axially, thereby resulting in a highly-compliant tubular construct. In this work, we used projection stereolithography to 3D-print a planar NPR sheet composed of photosensitive poly(ethylene) glycol diacrylate biomaterial. We used a step-lithography exposure and a stitch process to scale up the projection printing process, and used the cut-missing rib unit design to develop a centimeter-scale NPR sheet, which was rolled up to form a tubular construct. The constructs had Poisson's ratios of -0.6 ≤ νxy ≤ -0.1. The NPR construct also supports higher cellular adhesion than does the construct that has positive νxy. Our NPR design offers a significant advance in the development of highly-compliant vascular grafts.
Asunto(s)
Materiales Biocompatibles/química , Polietilenglicoles/química , Impresión Tridimensional , Análisis de Elementos Finitos , Humanos , Fenómenos Mecánicos , Imagen Óptica , Distribución de PoissonRESUMEN
Thin films of biodegradable polymeric materials, poly(epsilon-caprolactone) (PCL) and poly(glycolic acid) (PGA) were micro-patterned using a Ti-sapphire femtosecond pulsed laser and ArF excimer UV laser in ambient conditions. The laser-patterned polymers were characterized using a scanning electron microscope (SEM), Fourier transform infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). In-vitro degradation tests were performed and the laser-patterned samples showed to be within one standard deviation of the control samples. Our results demonstrate that both lasers are excellent tools for micro-patterning biodegradable polymers since the bulk properties of the material can remain intact and because the direct-write method is rapid, flexible, and a chemical-free process.