One-Pot Synthesis of Robust Fluorescent Nanocomposite Gel via Frontal Polymerization.

Fluorescent nanocomposite gels have attracted increasing attention due to their excellent optical properties, as well as enhanced mechanical strength originating from the nanoparticles. At present, two-step methods are usually employed, where fluorescent nanoparticles are firstly prepared, followed by mixing with gel precursor to achieve the final products after gelation, which suffer from the disadvantages of a tedious and time-consuming process. Thus, the development of a facile strategy is highly desirable, which still remains an obstacle. Herein, a new one-pot synthesis method towards robust fluorescent nanocomposite gels via frontal polymerization (FP) is proposed, where small molecular precursors (citric acid (CA) and urea, or L-cysteine) and gel precursor (vinyl monomers) are mixed together as co-reactants. During the FP process, a lot of heat release gives rise to the generation of carbonized polymer dots (CPDs). Thus, companying with the propagating of the polymerization, the production of fluorescent CPDs/gel composite is completed. In addition, as a nanofiller, CPDs dramatically enhance the mechanical property of the CPDs/gel composite. This work proposes a new fast and efficient one-pot strategy for the production of CPDs/gel composite, which will guide the development of high-performance polymer nanocomposites through an in situ synchronous reaction fashion.

Influence of surface nanotopography and wettability on early phases of peri-implant soft tissue healing: an in-vivo study in dogs.

BACKGROUND: It is well established that nanotopography and wettability of implant surfaces contribute to osseointegration and long-term implant success. However, the effects of a hydrogenated surface with nanotubular and superhydrophilic properties on peri-implant soft tissue remain unclear. This study was designed to study the impact of a modified abutment surface on early soft tissue integration compared with a machined surface. METHODS: Thirty-six implants were placed at the bone level in the bilateral mandible of six beagles, followed by healing abutments belonging to the standard machined Ti-6Al-4V alloy abutments (TC4-M), anodized abutments with nanotubes (TC4-Nano), and hydrogenated abutments (TC4-H/Nano) groups, which were randomly screwed to the implants. After two and four weeks of wound healing, the animals were euthanized for histological evaluation. RESULTS: A superhydrophilic nanotubular surface developed on the hydrogenated abutment. Histological and histometric analyses revealed similar peri-implant soft tissue healing and dimensions for the three types of abutments at two and four weeks. Connective tissue (CT) length was longer around TC4-H/Nano abutments compared with standard abutments; however, the differences were not statistically significant. Moreover, collagen fibers in the TC4-H/Nano group extended and were attached perpendicularly to the superhydrophilic surface. CONCLUSIONS: Our results revealed that the soft tissue interface adjacent to the hydrogenated abutment is comparable to that of the machined abutment. A tendency of increased CT length and perpendicular collagen fibers was observed around the modified abutment. This study suggests that nanotubular/superhydrophilic surfaces could be a promising modification to enhance soft tissue sealing. However, comprehensive studies should be conducted to evaluate the peri-implant soft tissue around the modified abutment immunohistochemically, histopathologically, and clinically.

In vitro behaviour of human gingival fibroblasts cultured on 3D-printed titanium alloy with hydrogenated TiO2 nanotubes.

Selective laser melting (SLM), as one of the most common 3D-printed technologies, can form personalized implants, which after further surface modification can obtain excellent osseointegration. To study the surface properties of SLM titanium alloy (Ti6Al4V) with hydrogenated titanium dioxide (TiO2)nanotubes (TNTs) and its influence on the biological behaviour of human gingival fibroblasts (HGFs), we used SLM to prepare 3D-printed titanium alloy samples (3D-Ti), which were electrochemically anodizing to fabricate 3D-TNTs and then further hydrogenated at high temperature to obtain 3D-H2-TNTs. Polished cast titanium alloy (MP-Ti) was used as the control group. The surface morphology, hydrophilicity and roughness of MP-Ti, 3D-Ti, 3D-TNTs and 3D-H2-TNTs were measured and analysed by scanning electron microscopy (SEM), contact angle metre, surface roughness measuring instrument and atomic force microscope, respectively. HGFs were cultured on the four groups of samples, and the cell morphology was observed by SEM. Fluorescence staining (DAPI) was used to observe the number of adhered cell nuclei, while a cell counting kit (CCK-8) was used to detect the early adhesion and proliferation of HGFs. Fluorescence quantitative real time polymerase chain reaction (RT-qPCR) and enzyme-linked immunosorbent assay (ELISA) were used to detect the expression of adhesion-related genes and fibronectin (FN), respectively. The results of this in vitro comparison study indicated that electrochemical anodic oxidation and high-temperature hydrogenation can form a superhydrophilic micro-nano composite morphology on the surface of SLM titanium alloy, which can promote both the early adhesion and proliferation of human gingival fibroblasts and improve the expression of cell adhesion-related genes and fibronectin. Graphical abstract.

Graphene Oxide Loaded on TiO2-Nanotube-Modified Ti Regulates the Behavior of Human Gingival Fibroblasts.

Surface topography, protein adsorption, and the loading of coating materials can affect soft tissue sealing. Graphene oxide (GO) is a promising candidate for improving material surface functionalization to facilitate soft tissue integration between cells and biomaterials. In this study, TiO2 nanotubes (TNTs) were prepared by the anodization of Ti, and TNT-graphene oxide composites (TNT-GO) were prepared by subsequent electroplating. The aim of this study was to investigate the effect of TNTs and TNT-GO surface modifications on the behavior of human gingival fibroblasts (HGFs). Commercially pure Ti and TNTs were used as the control group, and the TNT-GO surface was used as the experimental group. Scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction were used to perform sample characterization. Cell adhesion, cell proliferation, cell immunofluorescence staining, a wound-healing assay, real-time reverse-transcriptase polymerase chain reaction (RT-PCR), and Western blotting showed that the proliferation, adhesion, migration, and adhesion-related relative gene expression of HGFs on TNT-GO were significantly enhanced compared to the control groups, which may be mediated by the activation of integrin ß1 and the MAPK-Erk1/2 pathway. Our findings suggest that the biological reactivity of HGFs can be enhanced by the TNT-GO surface, thereby improving the soft tissue sealing ability.

The effect of implants loaded with stem cells from human exfoliated deciduous teeth on early osseointegration in a canine model.

BACKGROUND: This in vivo experimental study investigated the effect of stem cells from human exfoliated deciduous teeth (SHEDs) on early osteogenesis around implants. METHODS: In four healthy adult male Beagle dogs, the left mandibular received implants and SHED as the experimental group, and the right mandibular received implants and phosphate-buffered saline as the control group. The Beagle dogs were randomly divided into groups A and B, which were sacrificed at 2 and 4 weeks after implantation. Micro-computed tomography and histological analysis were used to investigate the effect of SHED-loading on the early osseointegration around the implants. RESULTS: The total bone-to-implant contact (BIC%) and interthread bone improved significantly. The analysis of the bone volume fraction and trabecular thickness showed that the bone trabecula around the implants in the SHEDs group was thicker and denser than that in the control group, suggesting a better osseointegration. CONCLUSIONS: The application of implants pre-adhered with SHEDs improved and accelerated early osseointegration around the implant, resulting in thicker and denser trabecular bone.

Effect of Microplastics on the Adsorption and Desorption Properties of Cadmium in Soil.

This study analyzed the role of micro polyethylene (mPE) and micro polypropylene (mPP) on cadmium (Cd) adsorption and desorption in soil. Cd adsorption in soils reached equilibrium within 240 min with or without mPP/mPE. The largest Cd adsorption amount was 923.88 mg kg-1 in the control treatment (no MPs). The Cd adsorption amount in the mPP treatment was 872.21 mg kg-1, greater than that in the mPE treatment (780.21 mg kg-1). MPs reduced the soil adsorption of Cd to some extent. Soils supplemented with mPE were more inhibitory to Cd adsorption than mPP. The pseudo-second-order model equation proved to be the most optimal equation for describing Cd adsorption dynamics in the presence of different MPs, while the Freundlich equation was best for describing isothermal adsorption of Cd in the presence of MPs. MPs facilitate the desorption of metals from the soil.

Visible light-induced antibacterial and osteogenic cell proliferation properties of hydrogenated TiO2 nanotubes/Ti foil composite.

We successfully fabricated the hydrogenated TiO2 nanotubes/Ti foil (H-TNTs/f-Ti) composite via one-step anodization and two-step annealing. H-TNTs/f-Ti composite had a higher visible light-induced photoelectric response and more hydroxyl functional groups compared with Ti foil and unmodified TiO2 nanotubes/Ti foil composite, which contributed to limiting the proliferation of Streptococcus mutans and Porphyromonas gingivalis, promoting the proliferation of MC3T3-E1 cell on the hydroxylated surface, and improving the biocompatibility with osteogenic cells. Our study provides a simple and effective method for significantly improving dental implant efficacy.

Antibacterial activity, bio-compatibility and osteogenic differentiation of graphene oxide coating on 3D-network poly-ether-ether-ketone for orthopaedic implants.

Poly-ether-ether-ketone (PEEK) has attracted increasing attention as a promising orthopaedic implant material owing to its excellent mechanical properties and biocompatibility. However, its antibacterial properties must be improved as an implant material. In this study, PEEK was sulfonated to obtain a porous surface, and graphene oxide (GO) was deposited to form a coating with antibacterial activity and biocompatibility. After PEEK was sulfonated for different durations, GO was deposited on the surface to prepare the coating (SPEEK-GO), which was then characterised using scanning electron microscopy (SEM), Raman spectroscopy, and contact angle measurements. The in vitro study included antimicrobial and cellular tests. The results showed that the PEEK sulfonated using a 10-min treatment exhibited a uniform porous structure and provided a better basal surface for the deposition of GO. The SPEEK-GO coating displayed strong antibacterial activity against two common dental pathogens. It exhibited good adhesion and proliferation of MC3T3-E1. Moreover, it showed osteogenic differentiation as bone implant material.

The Early Adhesion Effects of Human Gingival Fibroblasts on Bovine Serum Albumin Loaded Hydrogenated Titanium Nanotube Surface.

The soft tissue sealing at the transmucal portion of implants is vital for the long-term stability of implants. Hydrogenated titanium nanotubes (H2-TNTs) as implant surface treatments were proved to promote the adhesion of human gingival fibroblasts (HGFs) and have broad usage as drug delivery systems. Bovine serum albumin (BSA) as the most abundant albumin in body fluid was crucial for cell adhesion and was demonstrated as a normal loading protein. As the first protein arriving on the surface of the implant, albumin plays an important role in initial adhesion of soft tissue cells, it is also a common carrier, transferring and loading different endogenous and exogenous substances, ions, drugs, and other small molecules. The aim of the present work was to investigate whether BSA-loaded H2-TNTs could promote the early adhesion of HGFs; H2-TNTs were obtained by hydrogenated anodized titanium dioxide nanotubes (TNTs) in thermal treatment, and BSA was loaded in the nanotubes by vacuum drying; our results showed that the superhydrophilicity of H2-TNTs is conducive to the loading of BSA. In both hydrogenated titanium nanotubes and non-hydrogenated titanium nanotubes, a high rate of release was observed over the first hour, followed by a period of slow and sustained release; however, BSA-loading inhibits the early adhesion of human gingival fibroblasts, and H2-TNTs has the best promoting effect on cell adhesion. With the release of BSA after 4 h, the inhibitory effect of BSA on cell adhesion was weakened.

Application of Nano-Hydroxyapatite Derived from Oyster Shell in Fabricating Superhydrophobic Sponge for Efficient Oil/Water Separation.

The exploration of nonhazardous nanoparticles to fabricate a template-driven superhydrophobic surface is of great ecological importance for oil/water separation in practice. In this work, nano-hydroxyapatite (nano-HAp) with good biocompatibility was easily developed from discarded oyster shells and well incorporated with polydimethylsiloxane (PDMS) to create a superhydrophobic surface on a polyurethane (PU) sponge using a facile solution-immersion method. The obtained nano-HAp coated PU (nano-HAp/PU) sponge exhibited both excellent oil/water selectivity with water contact angles of over 150° and higher absorption capacity for various organic solvents and oils than the original PU sponge, which can be assigned to the nano-HAp coating surface with rough microstructures. Moreover, the superhydrophobic nano-HAp/PU sponge was found to be mechanically stable with no obvious decrease of oil recovery capacity from water in 10 cycles. This work presented that the oyster shell could be a promising alternative to superhydrophobic coatings, which was not only beneficial to oil-containing wastewater treatment, but also favorable for sustainable aquaculture.

[Effect of Dendrobium officinale superfine powder on stomach Yin deficiency model mice induced by "spicy overeating"].

Dendrobium officinale is a traditional Chinese medicine for nourishing Yin and benefiting stomach. Its superfine powder has many advantages, such as good dissolution, high utilization rate, strong integrity and easy to use. However, the researches on effect of D. officinale superfine powder on stomach Yin deficiency model are still not sufficient. In this experiment, we explored the effect of D. officinale superfine powder in mice model with stomach Yin deficiency caused by "spicy overeating", and provided certain reference value for its application in gastrointestinal diseases. Male ICR mice were randomly divided into normal group, model group, Yiweitang group, omeprazole group, and D. officinale superfine powder high, medium and low dose groups. The mixture of wine and pepper liquid was given by gavage administration for 30 d, and the corresponding drug was given for 60 d while the model was conti-nued. The body weight, food intake, water intake, fecal moisture content and particle number, foot temperature of mice were measured. The levels of serum gastrin(Gas), motilin(MTL) and somatostatin(SS) were measured by ELISA. Gastric histomorpho-logy was observed by HE staining. The expression levels of nuclear factor kappa B(NF-κB) and cyclooxygenase-2(COX-2) were determined by immunohistochemistry. The expression levels of B-cell lymphoma-2(Bcl-2) and Bcl-2 associated X protein(Bax) in gastric tissues were detected by Western blot. The results showed that D. officinale superfine powder could increase the food intake, water intake, fecal moisture content and particle number, reduce the foot temperature, improve the pathological changes of gastric mucosa, reduce the expression of NF-κB, COX-2 protein in gastric tissues, and increase the ratio of Bax/Bcl-2. D. officinale superfine powder can "nourish Yin and benefit the stomach", improve the syndrome of stomach Yin deficiency, such as "hunger but not want to eat, dry mouth but not want to drink, hand and feet hot, constipation", and reduce the damage of gastric mucosa. The mechanism may be related to regulating the secretion of gastrointestinal hormones, inhibiting the inflammation of gastric tissues and promoting the apoptosis of abnormal cells in gastric tissues.

Effects of Acute Aerobic and Resistance Exercise on Cognitive Function and Salivary Cortisol Responses.

This study aimed to determine the comparative effectiveness of aerobic vs. resistance exercise on cognitive function. In addition, salivary cortisol responses, as an indicator of arousal-related neuroendocrine responses, were assessed as a potential mechanism underlying the effects of these 2 modes of acute exercise on cognition. Forty-two young adults were recruited and performed the Stroop task after 1 session of aerobic exercise, resistance exercise, and a sedentary condition performed on separate days. Saliva samples were collected at baseline and immediately and 30 min after treatment conditions. Acute exercise, regardless of exercise modality, improved multiple aspects of cognitive function as reflected by the Stroop task. Cortisol responses were higher after both modes of acute exercise compared with the sedentary condition and were higher at baseline and 30 min afterward compared with immediately after treatment conditions. These findings suggest that acute exercise of moderate intensity facilitates cognitive function, and, although salivary cortisol is influenced by acute exercise, levels were not related to improvements in cognition.

Prevalence of dental erosion among people with gastroesophageal reflux disease in China.

STATEMENT OF PROBLEM: Gastroesophageal reflux disease (GERD) is typically diagnosed based on symptoms of regurgitation and heartburn, although it may also manifest as asthma-like symptoms, laryngitis, or dental erosion. PURPOSE: The purpose of this prospective, cross-sectional study was to assess the prevalence of dental erosion in people with GERD and to evaluate the association between GERD and dental erosion. MATERIAL AND METHODS: The presence, severity, and pattern of dental erosion was assessed in 51 participants with GERD and 50 participants without GERD using the Smith and Knight tooth wear index. Medical, dietary, and dental histories were collected by questionnaire. Factors potentially related to dental erosion, including GERD, were evaluated by logistic regression. RESULTS: Dental erosion was observed in 31 (60.8%) participants with GERD and 14 (28%) participants without GERD. Bivariate analysis revealed that participants with GERD were more likely to experience dental erosion (crude odds ratio [cOR]: 2.74; 95% CI: 1.19, 6.32) than participants without GERD. Multivariate analysis also revealed that participants with GERD had a higher risk of dental erosion (adjusted odds ratio [aOR]: 3.97; 95% CI: 1.45, 10.89). Consumption of grains and legumes, the most frequently consumed foods in China, did not correlate with dental erosion. However, carbonated beverage consumption was significantly associated with GERD and dental erosion (aOR: 3.34; 95% CI: 1.01, 11.04; P=.04). CONCLUSIONS: GERD was positively correlated with dental erosion. Carbonated beverage consumption can increase the risk of both GERD and dental erosion.

Tests for time-invariant correlation of longitudinally measured biomarkers.

Our work is motivated by a study that longitudinally measured serum biomarkers and levels of bacterial pathogens in the oral cavity with the intent of testing if the correlation between each biomarker and each pathogen is homogeneous over time. To address this question, we propose a model for the joint distribution of the serial biomarker measures and the serial pathogen measures and use the variance of this distribution to derive the asymptotic distribution of the sample correlation coefficient of a biomarker and a pathogen at each time point. We use both a Wald test based upon Fisher's Z-transformation and an F-test with an estimated degrees of freedom in order to produce a test with valid size. We examine the performance of both tests via Monte Carlo simulation in a variety of settings defined by the number of subjects, the number of time points, and the range of the true correlation coefficients.

Functional characterization of CCR in birch (Betula platyphylla × Betula pendula) through overexpression and suppression analysis.

We cloned a Cinnamoyl-CoA Reductase gene (BpCCR1) from an apical meristem and first internode of Betula platyphylla and characterized its functions in lignin biosynthesis, wood formation and tree growth through transgenic approaches. We generated overexpression and suppression transgenic lines and analyzed them in comparison with the wild-type in terms of lignin content, anatomical characteristics, height and biomass. We found that BpCCR1 overexpression could increase lignin content up to 14.6%, and its underexpression decreased lignin content by 6.3%. Surprisingly, modification of BpCCR1 expression led to conspicuous changes in wood characteristics, including xylem vessel number and arrangement, and secondary wall thickness. The growth of transgenic trees in terms of height was also significantly influenced by the modification of BpCCR1 genes. We discuss the functions of BpCCR1 in the context of a phylogenetic tree built with CCR genes from multiple species.

Preparation of chondroitin sulfate-g-poly(ε-caprolactone) copolymers as a CD44-targeted vehicle for enhanced intracellular uptake.

Chondroitin sulfate-g-poly(ε-caprolactone) (CP) copolymers were synthesized via atom transfer radical addition (ATRA). The CP copolymers self-assembled into micelles in water, and the micelles could be used to encapsulate a hydrophobic anticancer drug, camptothecin (CPT), in the core for tumor targeting delivery. The physicochemical properties of the micelles and CPT-loaded micelles were thoroughly characterized. For the in vitro test, the CPT release, the protection of the lactone ring of CPT from hydrolysis and the cellular uptake of CPT were studied. The cell-killing and apoptosis-inducing effects using the CPT-loaded micelles were significantly better than using free CPT against CRL-5802 cells. The micellar internalization into CRL-5802 cells was primarily via CD44 and clathrin dual-mediated endocytosis. For the in vivo test, the therapeutic efficacy of the CPT-loaded micelles was studied in a non-small-cell lung cancer xenograft animal model. The CPT-loaded micelles showed good inhibition in tumor growth as compared with a commercial product, CPT-11, in CRL-5802 tumor-bearing mice. The in vitro and in vivo data suggested the CP-based micelles are promising anticancer drug vehicles for lung cancer targeting.

Multifunctional and bioinspired titanium surface with multilayer nanofilms for novel dental implant applications.

Introduction: Smart multifunctional surfaces targeting intricate biological events or versatile therapeutic strategies are imminent to achieve long-term transmucosal implant success. Methods: This study used dopamine (DA), graphene oxide (GO), and type IV collagen (COL-IV) to construct multilayer nanofilms (DGCn) based on their universal adhesive and biomimetic properties to design a versatile and bioactive titanium implant. The characterization of DGCn on different titanium surfaces was performed, and its loading capacity, release profile, in situ gene delivery, and in vitro biological properties were preliminarily evaluated. Results: Our results demonstrate that hydrogenated TiO2 nanotubes (H) provide a better platform for the DGCn coating than machined Ti and air-TiO2 nanotubes. The H-DGC10 displayed the most stable surface with excellent loading capacity, sustained-release profile, and in situ gene transfection efficiency; this could be due to the high specific surface area of H and GO, as well as the functional groups in H, DA, and GO. Moreover, the H-DGC10 exhibited good biocompatibility for human oral epithelial cells and promoted the expression of integrin ß4 and laminin 332, both being hemidesmosome-related proteins. Discussion: Our findings suggest that H-DGCn can be designed as a smart multifunctional interface for titanium implants to achieve long-term transmucosal implant success and aid in versatile therapeutic strategies.

Versatile Bioactive Glass/Zeolitic Imidazolate Framework-8-Based Skin Scaffolds toward High-Performance Wound Healing.

Designing a novel biomaterial for wound healing is based on biocompatibility and excellent mechanical strength. In this study, bioactive glass (BG) and zeolitic imidazolate framework-8 (ZIF-8) have been incorporated into poly(ε-caprolactone)/poly(vinyl alcohol) (PCL/PVA) composite skin scaffolds via microfluidic electrospinning. Interestingly, the addition of ZIF-8 further strengthens the BG stability and demonstrates better antibacterial effects. Utilizing the slow release of Zn, Ca, and Si ions, it also significantly promotes growth factor expression and skin regeneration. In addition, it is further demonstrated by in vitro and in vivo studies that the prepared composite skin scaffolds possess excellent biocompatibility, antibacterial capabilities, and mechanical properties. The prepared BG/ZIF-8-loaded scaffold possesses high tensile strength (26 MPa) and excellent antibacterial properties (achieves 89.64 and 78.8% inhibition of E. coli and S. aureus, respectively), and cell viability increased by 51.2%. More importantly, the wound shrinkage of the BG/ZIF-8-loaded scaffold is better than that of an unloaded scaffold, and the shrinkage rates of PCL/PVA@BG/ZIF-8(1 wt %) group is 95% with 2.2 mm granulation growth thickness within 12 days. Thus, the composite skin scaffold loaded with BG/ZIF-8 prepared by microfluidic electrospinning provides a new perspective for accelerating wound healing and is a potential novel therapeutic strategy for efficient wound healing.

Segmental mandibulectomy and microvascular reconstruction with fibula free flap: Comparison between intraoral and extraoral approaches.

BACKGROUND: Segmental mandibulectomy and reconstruction of resulting defect can be performed via intraoral approach (IOA) or extraoral approach (EOA). Both approaches have advantages, disadvantages, indications, and contraindications to consider during their selection. OBJECTIVE: To compare IOA vs EOA of segmental mandibulectomy and microvascular reconstruction with fibula free flap (FFF). METHODS: We conducted a retrospective cohort study in which 51 patients who underwent segmental mandibulectomy and microvascular reconstruction with FFF from 2020 to 2024 were included, especially 17 patients by IOA and 34 patients by EOA, representing both groups of this study. Clinical characteristics, surgery parameters, and patients' prognosis were evaluated. Patients' satisfaction and Derriford Appearance Scale (DAS59) were assessed during follow-up. RESULTS: Ameloblastoma was the most frequent diagnosis (52.9% managed by IOA vs 70.6% by EOA); FFF was frequently positioned as double barrel (94.1% managed by IOA vs 88.2% by EOA). Compared with EOA group, IOA group had less intraoperative blood loss (mean difference [MD] = -112.2, 95% confidence interval [CI]: -178.9 to -45.5, p = 0.001), higher satisfaction score (MD = 1.3, 95% CI: 0.9 to 1.7, p ˂ 0.001), and lower DAS59 score (MD = -0.5, 95% CI: -0.7 to -0.2, p ˂ 0.001). CONCLUSION: Both IOA and EOA were found safe and feasible, presenting similar perioperative features and postoperative outcomes. Patients managed with IOA were more satisfied with aesthetic outcomes than patients managed with EOA. In the absence of simultaneous immediate implant during mandibular FFF reconstruction, after stability of FFF on the defect site, patients should always be referred to an implantologist and/or prosthodontist for teeth restoration to improve functional and aesthetic outcomes.

A new low-bandgap polymer containing benzene-fused quinoxaline: significantly enhanced performance caused by one additional benzene ring.

Two new alkoxy-substituted quinoxaline (Qx)-based copolymers, PBDTQx and PBDTPz, are designed and synthesized. The only difference between these two polymers is that two methyl groups of the Qx are replaced by one additional fused benzene ring. The UV-Vis absorptions, thermal stability, energy levels, field-effect carrier mobility, and photovoltaic characteristics of the two copolymers are systematically evaluated to understand the relationships between the polymer structure at the molecular level and the photovoltaic performances. Photovoltaic cells based on the PBDTPz with a structure of ITO/PEDOT:PSS/Polymer:PC(71) BM/PEO/Ca/Al exhibit a promising efficiency of 4.40%, while that of PBDTQx is relatively much poorer.