Effects of Nd:YAG laser irradiation at different energy densities on dentin bond durability under simulated pulpal pressure.

OBJECTIVES: To evaluate the effects of Nd:YAG laser irradiation on the microstructures of dentin surfaces and the long-term bond strength of dentin under simulated pulpal pressure. MATERIALS AND METHODS: Under simulated pulp pressure, 30 freshly extracted caries-free third molars were cut into 2-mm-thick dentin samples and then divided into five groups: the control and laser groups (93.3 J/cm2; 124.4 J/cm2; 155.5 J/cm2; 186.6 J/cm2). Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), and Vickers hardness were used to analyze the surface morphology, composition, and mechanical properties of the dentin before and after laser irradiation. Another 80 caries-free third molars were removed and treated as described above, and the resin was bonded to the dentin surface with Single Bond Universal (SBU) adhesive in self-etch mode to make stick specimens. Microtensile bond strength (µTBS), confocal laser scanning microscopy (CLSM), and interfacial silver nanoleakage tests before and after 10,000 times thermocycling were then performed to analyze the bonding properties and interfacial durability of each group. RESULTS: SEM observations revealed that the surfaces of all laser group specimens were rough with open dentin tubules. Laser irradiation altered the surface composition of dentin while removing some collagen fibers but did not affect its surface hardness or crystallographic characteristics. Furthermore, laser irradiation with an energy density of 124.4 J/cm2 significantly promoted the immediate and aging bond strengths and reduced nanoleakage compared to those of the control group. CONCLUSIONS: Under simulated pulp pressure, Nd:YAG laser pretreatment altered the chemical composition of dentin and improved the immediate and long-term bond strength. CLINICAL RELEVANCE: This study investigated the optimal parameters for Nd:YAG laser pretreatment of dentin, which has potential as a clinical method to strengthen bonding.

Effect of varying auxiliaries on maxillary incisor torque control with clear aligners: A finite element analysis.

INTRODUCTION: This study aimed to evaluate the effects of varying auxiliaries on tooth movement and stress distribution when maxillary central incisors were torqued 1° with a clear aligner through finite element analysis. METHODS: Three-dimensional finite element models, including maxillary alveolar bone, periodontal ligament, dentition, and clear aligner, were constructed. According to the auxiliaries designed on the maxillary central incisor, 5 models were created: (1) without auxiliaries (control model), (2) with the power ridge, (3) with the semi-ellipsoid attachment, (4) with the horizontal rectangular attachment, and (5) with the horizontal cylinder attachment. The tooth movement and periodontal ligament stress distribution after a palatal root torque of 1° were analyzed for each of the 5 models. RESULTS: With 1° torque predicted, the maxillary central incisor without auxiliaries showed a tendency of labial tipping, mesial tipping, and intrusion. The rotation center moved occlusally in the power ridge model. The labiolingual inclination variation increased in the semi-ellipsoid attachment model but decreased in the power ridge model. The maxillary central incisor is twisted in the distal direction in the power ridge model. The maxillary central incisor of the horizontal rectangular attachment and the horizontal cylinder attachment model behaved similarly to the control model. Periodontal stresses were concentrated in the cervical and apical areas. The maximum von Mises stresses were 11.6, 12.4, 3.81, 1.14, and 11.0 kPa in the 5 models. The semi-ellipsoid attachment model exhibited a more uniform stress distribution than the other models. CONCLUSIONS: Semi-ellipsoid attachment performed better efficacy on labiolingual inclination, and power ridge performed better efficacy on root control. However, a distal twist of maxillary incisors could be generated by the power ridge.

Preliminary identification of soil fungi for the degradation of polyurethane film.

Polyurethane (PU) is a versatile plastic that boasts high environmental resistance. The biodegradation of PU has become a hot topic of research aimed at finding ways to potentially solve PU pollutants. Identifying microorganisms capable of efficiently degrading PU plastics is pivotal for the development of a green recycling process for PU. This study aimed to isolate and characterize PU-degrading fungi from the soil of a waste transfer station in Luoyang, China. We isolated four different fungal strains from the soil. Among the isolates, the P2072 and P2073 strains were identified as Rhizopus oryzae (internal transcribed spacer identity, 99.66%) and Alternaria alternata (internal transcribed spacer identity, 99.81%), respectively, through microscopic, morphologic, as well as 18S rRNA sequencing. The degradation ability of strains P2072 and P2073 was analyzed through measurement of weight loss, and they exhibited a degradation rate of 2.7% and 3.3%, respectively, for the PU films after 2 months' growth in mineral salt medium (MSM) with PU films as the sole carbon source. In addition, the P2073 strain exhibited protease activity in the presence of PU. To our knowledge, R. oryzae has never been reported as a PU-degrading fungus. This study provides a new perspective on the biodegradation of PU.

Effects of Er: YAG, Er,Cr: YSGG, and Nd: YAG laser irradiation and adhesive systems on the immediate and long-term bond strength of dentin: a systematic review and meta-analysis.

At present, lasers are increasingly used in the oral clinical field, and research and applications in dental hard tissue treatment are also increasing. The effect of laser etching dentin on the bonding strength of composite resin reported in the literature is still inconclusive. The purpose of this review was to evaluate whether laser etching can improve the immediate and long-term bonding strength of dentin and investigate the effect of different types of adhesives on the bonding strength of dentin. Two reviewers performed a literature search up from January 2012 to November 2021 in four databases: MEDLINE (PubMed), Web of Science, EMBASE, and the Cochrane Library. A total of 25 studies were included in the meta-analysis. The Cochrane Collaboration Bias Risk Assessment tool was used to evaluate the quality of the included literature, and an analysis was carried out using Review Manager Software version 5.3. The aging bond strength of dentin after erbium (Er): yttrium aluminum garnet (YAG) laser treatment was significantly lower than that of dentin in the bur group (P < 0.00001). At the same time, the bond strength of dentin immediately and aging after (Er), chromium-doped (Cr): yttrium scandium gallium garnet (YSGG) laser treatment was lower than that of dentin in the bur group (P < 0.05). There was no significant difference in the immediate and aging bonding strength among samples in the Er: YAG laser, Er, Cr: YSGG laser, and blank control groups (no laser or bur). The aging bond strength of samples after neodymium-doped (Nd): YAG laser treatment was higher than that of samples in the blank control group (P < 0.05); in addition, the performance of self-etching adhesive was slightly better than that of acid etching adhesive. Regardless of the applied surface treatment and the adhesive employed, dentin after aging showed significant bond degradation (P < 0.05). There was high heterogeneity of bond strength between different groups, and the small number of studies and the contradictory results may be the main reasons for this outcome.

Efficacy of upper-incisor torque control with clear aligners: a retrospective study using cone-beam computed tomography.

OBJECTIVES: The objectives of this retrospective clinical study were to evaluate the efficacy of clear aligners on upper-incisor torque control, with the expectation of providing guidance for clinics. MATERIALS AND METHODS: Pretreatment (T0) and posttreatment (T1) cone-beam computed tomography (CBCT) scans of 47 patients with a nonextraction treatment using clear aligners were obtained and 120 upper-incisors with torque ≥5° were selected. Voxel-based superimpositions were performed using Dolphin imaging software and achieved movements were then measured. Difference between achieved and predicted movement (DAPM) and the efficiency for upper-incisor torque were used to evaluate the torque control efficacy. RESULTS: The achieved torque movement with clear aligners was lower than predicted significantly, as the mean efficiency was 46.81±33.95%. Additionally, the achieved incisor movement of the crown and root differed significantly from the predicted movement, especially root movement. CONCLUSIONS: Clear aligners struggle to control upper-incisor torque, particularly root movement. In that case, overcorrection is necessary to prevent torque loss. CLINICAL RELEVANCE: Clear aligners remain a limitation on torque control and overcorrection should be considered.

Anion-Controlled Assembly of a Silver-Responsive Bifunctional Coordination Polymer with Detection and Large Adsorption Capacity.

The recognition and adsorption of silver ions (Ag+) from industrial wastewater are necessary but still challenging. Herein, we constructed four Zn(II)-based coordination polymers (CPs), namely, [Zn(btap)2(NO3)2]n (1), [Zn(btap)(SO4)(H2O)3]n (2), {[Zn(btap)2(H2O)2]·(ClO4)2}n (3), and [Zn(btap)Cl2]n (4), by using 3,5-bis(triazol-1-yl)pyridine (btap) with different anionic Zn(II) salts. The crystal structures of 1-4, varying from one-dimensional beaded (1) and zigzag chain (2) to two-dimensional sql (3) and bex (4) typologies, were regulated by the coordination modes of btap and the counter-anions. The water stability, pH stability, thermostability, and luminescent properties of the CPs were investigated. The luminescence performances in a series of cations and anions were also explored. Considering the high density of chloride groups in the structure, 4 showed luminescence sensing for Ag+ [KSV = 9188.45 M-1 and a limit of detection (LOD) of 4.9 µM], as well as an excellent ability for Ag+ adsorption in aqueous solution (maximum adsorption capacity, 653.3 mg/g). Additionally, anti-interference experiments revealed that 4 had excellent recognition and adsorption capacities for Ag+ even when multiple ions coexisted. Moreover, XRD, EDS, and XPS analyses confirmed that the coordination of Ag+ with chloride groups in 4 resulted in excellent adsorption capacity and prevented ligand-to-ligand electron transfer, showing excellent detection ability. Suitable coordination sites were introduced to interact strongly with Ag+, along with detection and large adsorption capacity. Our strategy can effectively design and develop multifunctional CP-based materials, which are applicable in removal processes and environmental protection, by regulating anions in the self-assembly and introducing CP functional groups.

Microplastics contamination in groundwater of a drinking-water source area, northern China.

Although the contamination of microplastics (MPs) in groundwater has been anticipated, their occurrence, distribution, and composition require further understanding. In this study, the occurrence and distributions of MPs were investigated in shallow groundwater from an important water source district in Tianjin city of northern China. The abundance, the physical morphology, the chemical composition, and the potential correlations of the determined MPs with human activities were thoroughly characterized. MPs were determined from all ten sampling sites with the abundance ranged between 17.0 ± 2.16 to 44.0 ± 1.63 n/L, revealing the ubiquitous existed MPs contamination. Based on the physical categorization, fiber (44.74%) was the most abundant shape, while blue (31.02%) and transparent (26.09%) were the most prevalent colors. The dominant size of MPs was smaller than 200 µm which accounted for 73.10%. A total of seven types of MPs were determined with polyethylene, polyethylene terephthalate, and polystyrene as the main types, of which, polypropylene showed strong positive correlations with polystyrene, indicating the possible similar sources of them. Besides, the determined MPs in groundwater were greater in areas with the high population density and strong population activity, indicating their high correlation with human activity. The study highlighted the presence of MPs in groundwater of drinking water source in northern China and provided useful information for evaluating the potential ecological effects on water quality safety and human health brought by MPs.

Metal oxide-based macroporous ordered double affinity molecularly imprinted polymer for specific separation and enrichment of glycoprotein from food samples: a co-modification of DMSA and boronate affinity.

Metal oxide-based macroporous ordered double affinity molecularly imprinted polymers (D-MIPs) were developed as solid phase extraction (SPE) adsorbents for the specific identification of ovalbumin (OVA) under physiological pH conditions prior to ultraviolet visible (UV-vis) spectrophotometric detection. Herein, macroporous alumina (MA) was used as a matrix; dimercaptosuccinic acid (DMSA) and 3-aminophenylboric acid (APBA) were employed as dual-functional monomers; APBA is a self-polymerizing monomer. The effects of synthesis conditions, SPE conditions as well as selectivity, reproducibility, and reusability were studied. The co-modification of DMSA and boronate affinity renders the adsorbent exhibiting a high adsorption capacity (114.4 mg g-1) and short equilibrium time (30 min). The surface imprinting technology causes the adsorbent to have high selectivity towards OVA. The OVA recovery range is 91.1-99.6%. This study provides a promising method for the enrichment of OVA and other cis-diol-containing analytes in complex biological samples. A novel metal oxide-based macroporous ordered nanoparticle with a combination of DMSA and boronate affinity was successfully prepared for specific separation and enrichment of glycoprotein from complex biological samples.

Customized Utilization Strategies of Industrial Lignin to Produce Adsorbents and Flocculants Based on Fractionation and Adequate Structural Interpretation.

Lignin, a by-product of pulping and biorefinery, has great potential to replace petrochemical resources for wastewater purification. However, the defects of lignin, such as severe heterogeneity, inferior reactivity and poor solubility, characterize the production process of lignin-based products by high energy consumption and serious pollution. In this study, several lignin fractions with relatively homogeneous structure were first obtained by organic solvent fractionation, and their structures were fully deciphered by various characterization techniques. Subsequently, each lignin component was custom-valued for wastewater purification based on their structural characteristics. Benefiting from the high reactivity and reaction accessibility, the lignin fraction (lignin-1) refined by dissolving in ethanol and n-butanol could been used as a raw material to produce cationic lignin-based flocculant (LBF) in a copolymerization system using green, cheap and recyclable ethanol as solvent. The lignin fraction (lignin-2) extracted by methanol and dioxane showed low reactivity and high carbon content, which was used to produce lignin-based activated carbon (LAC) with phosphoric acid as activator. Moreover, the influences of synthetic factors on the purification capacity were discussed, and the LBF and LAC produced under the optimal conditions showed distinguished purification effect on kaolin suspension and heavy metal wastewater, respectively. Furthermore, the corresponding purification mechanism and external factors were also elaborated. It is believed that this cleaner production strategy is helpful for the valorization of lignin in wastewater resources.

Atorvastatin Promotes Macrocalcification, But Not Microcalcification in Atherosclerotic Rabbits: An 18F-NaF PET/CT Study.

INTRODUCTION: Our study aimed to investigate the effect of atorvastatin on plaque calcification by matching the results obtained by 18F-sodium fluoride (18F-NaF) positron emission tomography (PET)/computed tomography (CT) with data from histologic sections. METHODS AND RESULTS: The rabbits were divided into 2 groups as follows: an atherosclerosis group (n = 10) and an atorvastatin group (n = 10). All rabbits underwent an abdominal aortic operation and were fed a high-fat diet to induce atherosclerosis. Plasma samples were used to analyze serum inflammation markers and blood lipid levels. 18F-NaF PET/CT scans were performed twice. The plaque area, macrophage number and calcification were measured, and the data from the pathological sections were matched with the 18F-NaF PET/CT scan results. The mean standardized uptake value (0.725 ± 0.126 vs. 0.603 ± 0.071, P < 0.001) and maximum standardized uptake value (1.024 ± 0.116 vs. 0.854 ± 0.091, P < 0.001) significantly increased in the atherosclerosis group, but only slightly increased in the atorvastatin group (0.616 ± 0.103 vs. 0.613 ± 0.094, P = 0.384; 0.853 ± 0.099 vs.0.837 ± 0.089, P < 0.001, respectively). The total calcium density was significantly increased in rabbits treated with atorvastatin compared with rabbits not treated with atorvastatin (1.64 ± 0.90 vs. 0.49 ± 0.35, P < 0.001), but the microcalcification level was significantly lower. There were more microcalcification deposits in the areas with increased radioactive uptake of 18F-NaF. CONCLUSIONS: Our study suggests that the anti-inflammatory activity of atorvastatin may promote macrocalcification but not microcalcification within atherosclerotic plaques. 18F-NaF PET/CT can detect plaque microcalcifications.

Efficacy of Er:YAG laser irradiation for decontamination and its effect on biocompatibility of different titanium surfaces.

BACKGROUND: Erbium yttrium-aluminum-garnet (Er:YAG) laser have been shown to be suitable for decontamination of titanium surfaces at a wide range of energy settings, however, high intensity of laser irradiation destroy titanium surface and low intensity cannot remove enough microbial biofilm. The aim of this study was to investigate the optimal energy setting of Er:YAG laser for decontamination of sandblasted/acid-etched (SLA) and hydroxyapatite (HA) titanium surfaces. MATERIAL AND METHODS: After supragingival biofilm construction in vivo, SLA and HA titanium discs were divided into three groups: blank control (BC, clean discs), experimental control (EC, contaminated discs) and experimental groups (EP, contaminated discs irradiated by Er:YAG laser at 40, 70, and 100 mJ/pulse). Scanning electron microscopy (SEM), live/dead bacterial fluorescent detection, and colony counting assay were used to detect the efficacy of laser decontamination. To investigate the effect of laser decontamination on titanium surface biocompatibility, MC3T3-E1 cell adhesion and proliferation activity were examined by SEM and CCK-8 assay. RESULTS: Er:YAG laser irradiation at 100 mJ/pulse removed 84.1% of bacteria from SLA titanium surface; laser irradiation at 70 and 100 mJ/pulse removed 76.4% and 77.85% of bacteria from HA titanium surface respectively. Laser irradiation improved MC3T3-E1 cell adhesion on both titanium surfaces. For SLA titanium discs, 100 mJ/pulse group displayed excellent cellular proliferation activity higher than that in BC group (P < 0.01). For HA titanium discs, 70 mJ/pulse group showed the highest activity comparable to BC group (P > 0.05). CONCLUSIONS: With regards to efficient microbial biofilm decontamination and biocompatibility maintenance, Er:YAG laser at 100 mJ/pulse and 70 mJ/pulse are considered as the optimal energy settings for SLA titanium and HA titanium surface respectively. This study provides theoretical basis for the clinical application of Er:YAG laser in the treatment of peri-implantitis.

Proteome analysis guided genetic engineering of Corynebacterium glutamicum S9114 for tween 40-triggered improvement in L-ornithine production.

BACKGROUND: L-ornithine is a valuable amino acid with a wide range of applications in the pharmaceutical and food industries. However, the production of L-ornithine by fermentation cannot compete with other methods, because of the low titers produced with this technique. Development of fermentation techniques that result in a high yield of L-ornithine and efficient strategies for improving L-ornithine production are essential. RESULTS: This study demonstrates that tween 40, a surfactant promoter of the production of glutamate and arginine, improves L-ornithine production titers in engineered C. glutamicum S9114. The intracellular metabolism under tween 40 triggered fermentation conditions was explored using a quantitative proteomic approach, identifying 48 up-regulated and 132 down-regulated proteins when compared with the control. Numerous proteins were identified as membrane proteins or functional proteins involved in the biosynthesis of the cell wall. Modulation of those genes revealed that the overexpression of CgS9114_09558 and the deletion of CgS9114_13845, CgS9114_02593, and CgS9114_02058 improved the production of L-ornithine in the engineered strain of C. glutamicum Orn8. The final strain with all the exploratory metabolic engineering manipulations produced 25.46 g/L of L-ornithine, and a yield of 0.303 g L-ornithine per g glucose, which was 30.6% higher than that produced by the original strain (19.5 g/L). CONCLUSION: These results clearly demonstrate the positive effect of tween 40 addition on L-ornithine accumulation. Proteome analysis was performed to examine the impact of tween 40 addition on the physiological changes in C. glutamicum Orn8 and the results showed several promising modulation targets for developing L-ornithine-producing strains.

Microcomputer tomography measurement of minimum residual dentin thickness in mandibular first molars after virtual fiber post placement.

STATEMENT OF PROBLEM: In endodontically treated teeth, the residual dentin thickness (RDT) after post space preparation plays a major role in preventing strip perforation and vertical root fracture. PURPOSE: The purpose of this in vitro study was to estimate and identify danger areas in mandibular first molars submitted to post space preparation by virtual fiber post placement and to determine a minimum RDT (mRDT) measurement by microcomputer tomography (µCT) combined with multifunctional software. MATERIAL AND METHODS: A total of 24 human mandibular first molars prepared with ProTaper instruments and commercial fiber posts (#1 to #4) were scanned by using a µCT system. A framework based on MeVisLab was used to simulate clinical post placement in 2 mesial and single distal root canals. The mRDTs were measured on 4 sides (buccal, lingual, mesial, and distal) at positions 1-, 3-, and 5-mm apically from the root canal orifice. The associations between mRDT and different characteristics were examined and analyzed by 4-way ANOVA (α=.05). For each level of each root canal, the least value from the mean mRDTs of 4 sides was selected, and the side related to the least value was identified and recorded. The perforation rate of each level in different root canals was also calculated. RESULTS: Significant differences were detected among the different posts, root canals, levels, and sides (P<.001). The mean mRDT was higher in distal root canals than in mesiobuccal and mesiolingual root canals (P<.001). mRDTs of each level were mainly found on the mesial sides of distal roots and the distal sides of mesial roots. The perforation rate was higher when using #3 and #4 posts, and perforation mainly occurred at the distal side of mesial roots and at a level 5-mm apically from the canal orifice. CONCLUSIONS: For post placement in endodontically treated mandibular first molars, using a larger-sized post decreased the RDT and increased the perforation rate. Small fiber posts were safer and prevented perforation, with the distal root being the first choice. If more posts are required in a mesiobuccal and mesiolingual canal, the smallest appropriately sized post should be placed less than 3 mm from the root canal orifice. Combining virtual fiber post placement performed using a framework based on MeVisLab with µCT scanning is a convenient and accurate method of evaluating the risk of canal wall perforation.

Albendazole solid dispersions prepared using PEG6000 and Poloxamer188: formulation, characterization and in vivo evaluation.

This study aimed to optimize the preparation process of albendazole (ABZ) solid dispersion (SD) and enhance its dissolution rate and oral bioavailability in dogs. The ABZ-SD formulations were prepared by a fusion method with ABZ and polyethylene glycol 6000 (PEG 6000), poloxamer 188 (P 188) polymers at various weight ratios or the combination of PEG 6000&P 188. The characterizations of the optimal formulations were performed by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), in vitro dissolution test and molecular docking. The in vivo pharmacokinetic study was conducted in beagle dogs. As a result, ABZ solid dispersion based on PEG 6000&P 188 (1:2) was successfully prepared. The ABZ-SD formulation could significantly improve the apparent solubility and dissolution rate of ABZ compared with commercial tablets. Furthermore, the water solubility of ABZ-SD was improved mainly based on hydrogen bond association. Besides, at an oral dosage of 15 mg/kg ABZ, the SDs had higher Cmax values and areas under the curve (AUCs) compared to those of commercial ABZ tablets. Preparation of ABZ-loaded SDs by PEG 6000&P 188 is a promising strategy to improve the oral bioavailability of ABZ.

Periodontal ligament-associated protein-1 gets involved in experimental periodontitis.

BACKGROUND AND OBJECTIVE: Periodontal ligament-associated protein-1 (PLAP-1) is an important regulator of osteogenic differentiation of periodontal ligament cells and plays important role in the homeostasis of periodontal tissues. But the role of PLAP-1 in periodontitis is poorly understood. Expressions of PLAP-1 in experimental periodontitis are observed to elucidate whether PLAP-1 gets involved in the pathogenesis of periodontitis. MATERIAL AND METHODS: Wistar rats were randomly allocated to two groups (n = 6/group): Ligation group and Control group. PLAP-1 expression in experimental periodontitis was assessed by immunohistochemistry and collagen fibers in periodontal ligament were observed using picrosirius red staining. Expressions of PLAP-1 and CD68 in periodontitis were colocalized by double-labelled immunofluorescence. To further examine the relationship between PLAP-1 and osteoclastogenesis in experimental periodontitis, acute periodontal inflammatory infiltration and alveolar bone destruction were induced by administering ligated rats with 10 ng/mL tumor necrosis factor alpha (TNF-α; ligation + TNF-α group, n = 6). Alveolar bone loss was observed by micro-computed tomography (Micro-CT), and osteoclasts were identified by tartrate-resistant acid phosphatase staining (TRAP). Expressions of PLAP-1 in TNF-α stimulated human periodontal ligament cells were also detected at 24 and 48 hours by western blotting. RESULTS: PLAP-1 expression levels in periodontal ligament cells and collagen fibers were lower in the ligation group,compared with the control group. Similarly, TNF-α decreased PLAP-1 expression in human periodontal ligament cells in vitro. Degradation or destruction of collagen fibers accompanied the reduced PLAP-1 expression in the periodontal ligament in the ligation group. Colocalization of PLAP-1 and CD68 revealed the positive relationship between PLAP-1 and CD68+ infiltrating cells in periodontitis. More PLAP-1-positive inflammatory cells were found in the ligation + TNF-α group, compared with the ligation + saline group. CONCLUSION: PLAP-1-positive inflammatory cells are involved in the pathogenesis of periodontitis. An increase in PLAP-1-positive inflammatory cell number contributes periodontal inflammation and alveolar bone loss.

Protective role of α2-macroglobulin against jaw osteoradionecrosis in a preclinical rat model.

OBJECTIVE: We have previously demonstrated the effect of alpha-2-macroglobulin (α2M) in the remediation of radiation-induced cellular damage. Here, we investigated the protective effects of α2M in a preclinical rat model of jaw osteoradionecrosis (ORN). METHODS: Eighteen rats were divided randomly into three groups: the control group, the radiation therapy (RT) alone group, and the radiated mandibles pretreated with α2M (α2M + RT) group. One month after radiation, all left molar teeth were extracted. After another 3 months, the animals were sacrificed and body weight, histopathology, microcomputed tomography and immunofluorescence were evaluated in all groups. RESULTS: The RT group showed serious alopecia, bone exposure, inflammation, necrosis, fibrosis, and the absence of new bone formation within the socket. The α2M + RT group exhibited less alopecia than the RT group and slight inflammation and fibrosis in the bone marrow cavity. The cortical bone was similar to normal bone tissue. Interestingly, compared with RT group, serum superoxide dismutase levels in the α2M + RT group increased at the 1th day (P = 0.037), 14th day (P = 0.012), while reactive oxygen species levels clearly decreased at the 1th day (P< 0.001), 14th day (P = 0.007), and 28th day (P = 0.013). CONCLUSIONS: A clinically translational model of jaw ORN was successfully established and the application of α2M prior to radiation protected the bone from being injured by the radiation, possibly related to oxidative stress.

Mebendazole elicits potent antimyeloma activity by inhibiting the USP5/c-Maf axis.

c-Maf is a critical oncogenic transcription factor that contributes to myelomagenesis. Our previous studies demonstrated that the deubiquitinase USP5 stabilizes c-Maf and promotes myeloma cell proliferation and survival; therefore, the USP5/c-Maf axis could be a potential target for myeloma therapy. As a concept of principle, the present study established a USP5/c-Maf-based luciferase system that was used to screen an FDA-approved drug library. It was found that mebendazole, a typical anthelmintic drug, preferentially induced apoptosis in c-Maf-expressing myeloma cells. Moreover, oral administration of mebendazole delayed the growth of human myeloma xenografts in nude mice but did not show overt toxicity. Further studies showed that the selective antimyeloma activity of mebendazole was associated with the inhibition of the USP5/c-Maf axis. Mebendazole downregulated USP5 expression and disrupted the interaction between USP5 and c-Maf, thus leading to increased levels of c-Maf ubiquitination and subsequent c-Maf degradation. Mebendazole inhibited c-Maf transcriptional activity, as confirmed by both luciferase assays and expression measurements of c-Maf downstream genes. In summary, this study identified mebendazole as a USP5/c-Maf inhibitor that could be developed as a novel antimyeloma agent.

Optical resolution and mechanism using enantioselective cellulose, sodium alginate and hydroxypropyl-ß-cyclodextrin membranes.

Chiral solid membranes of cellulose, sodium alginate, and hydroxypropyl-ß-cyclodextrin were prepared for chiral dialysis separations. After optimizing the membrane material concentrations, the membrane preparation conditions and the feed concentrations, enantiomeric excesses of 89.1%, 42.6%, and 59.1% were obtained for mandelic acid on the cellulose membrane, p-hydroxy phenylglycine on the sodium alginate membrane, and p-hydroxy phenylglycine on the hydroxypropyl-ß-cyclodextrin membrane, respectively. To study the optical resolution mechanism, chiral discrimination by membrane adsorption, solid phase extraction, membrane chromatography, high-pressure liquid chromatography ultrafiltration were performed. All of the experimental results showed that the first adsorbed enantiomer was not the enantiomer that first permeated the membrane. The crystal structures of mandelic acid and p-hydroxy phenylglycine are the racematic compounds. We suggest that the chiral separation mechanism of the solid membrane is "adsorption - association - diffusion," which is able to explain the optical resolution of the enantioselective membrane. This is also the first report in which solid membranes of sodium alginate and hydroxypropyl-ß-cyclodextrin were used in the chiral separation of p-hydroxy phenylglycine.

Efficient bioconversion from acid hydrolysate of waste oleaginous yeast biomass after microbial oil extraction to bacterial cellulose by Komagataeibacter xylinus.

Biomass acid hydrolysate of oleaginous yeast Trichosporon cutaneum after microbial oil extraction was applied as substrate for bacterial cellulose (BC) production by Komagataeibacter xylinus (also named as Gluconacetobacter xylinus previously) for the first time. BC was synthesized in static culture for 10 days, and the maximum BC yield (2.9 g/L) was got at the 4th day of fermentation. Most carbon sources in the substrate (glucose, mannose, formic acid, acetic acid) can be utilized by K. xylinus. The highest chemical oxygen demand (COD) removal (40.7 ± 3.0%) was obtained at the 6th day of fermentation, and then the COD increased possibly due to the degradation of BC. The highest BC yield on COD consumption was 38.7 ± 4.0% (w/w), suggesting that this is one efficient bioconversion for BC production. The BC structure was affected little by the substrate by comparison with that generated in classical HS medium using field-emission scanning electron microscope (FE-SEM), Fourier transform infrared, and X-ray diffraction. Overall, this technology can both solve the issue of waste oleaginous yeast biomass and produce valuable biopolymer (BC).

Bacterial cellulose production from the litchi extract by Gluconacetobacter xylinus.

Although litchi has both nutrient and edible value, the extremely short preservation time limited its further market promotion. To explore processed litchi products with longer preservation time, litchi extract was selected as an alternative feedstock for production of bacterial cellulose (BC). After 2 weeks of static fermentation, 2.53 g/L of the BC membrane was obtained. The trace elements including magnesium (Mg) and sodium (Na) in the litchi extract were partly absorbed in the BC membrane, but no potassium (K) element was detected in it, curiously. Scanning electron microscope (SEM) photographs exhibited an ultrafine network nanostructure for the BC produced in the litchi extract. Analysis of the fourier-transform infrared spectroscopy (FTIR) confirmed the pellicles to be a cellulosic material. Interestingly, X-ray diffraction (XRD) results showed the BC membrane obtained from litchi extract had higher crystallinity of 94.0% than that from HS medium. Overall, the work showed the potential of producing high value-added polymer from litchi resources.