Bletilla striata Polysaccharide-Containing Carboxymethyl Cellulose Bilayer Structure Membrane for Prevention of Postoperative Adhesion and Achilles Tendon Repair.

Postoperative tissue adhesion and poor tendon healing are major clinical problems associated with tendon surgery. To avoid postoperative adhesion and promote tendon healing, we developed and synthesized a membrane to wrap the surgical site after tendon suturing. The bilayer-structured porous membrane comprised an outer layer [1,4-butanediol diglycidyl ether cross-linked with carboxymethyl cellulose (CX)] and an inner layer [1,4-butanediol diglycidyl ether cross-linked with Bletilla striata polysaccharides and carboxymethyl cellulose (CXB)]. The morphology, chemical functional groups, and membrane structure were determined. In vitro experiments revealed that the CX/CXB membrane demonstrated good biosafety and biodegradability, promoted tenocyte proliferation and migration, and exhibited low cell attachment and anti-inflammatory effects. Furthermore, in in vivo animal study, the CX/CXB membrane effectively reduced postoperative tendon-peripheral tissue adhesion and improved tendon repair, downregulating inflammatory cytokines in the tendon tissue at the surgical site, which ultimately increased tendon strength by 54% after 4 weeks.

Clinical significance of modified unilateral puncture percutaneous vertebroplasty guided by 3D- printed guides in the treatment of osteoporotic vertebral compression fractures: a retrospective study.

OBJECTIVE: To investigate the clinical significance of using 3D printing guides in modified unilateral puncture percutaneous vertebroplasty (PVP) for the treatment of osteoporotic vertebral compression fractures (OVCF), and to explore a new method for preventing paravertebral vein leakage during PVP in conjunction with a previous study of the optimal puncture-side bone cement/vertebral volume ratio(PSBCV/VV%). METHODS: This retrospective study analyzed 99 patients who underwent unilateral puncture PVP between January 2023 and December 2023. Patients were divided into a guide plate group (46 patients) and a conventional group (53 patients). The guide plate group underwent modified unilateral puncture PVP with the guidance of 3D printing guides, while the conventional group underwent unilateral puncture PVP using the conventional pedicle approach. The distribution of bone cement, surgical outcomes, and the occurrence of cement leakage into paravertebral veins were observed in both groups. RESULTS: The guide plate group had significantly shorter operating time and required fewer fluoroscopies compared to the conventional group. The amount of bone cement volume (BCV) used in the guide plate group was higher, but the amount of bone cement volume on the puncture side(PSBCV), the PSBCV/VV%, and the rate of paravertebral vein leakage were lower in the guide plate group compared to the conventional group (P < 0.05). Within each group, significant improvements in anterior vertebral margin height, Cobb angle, visual analog scale (VAS) score, and Oswestry Disability Index (ODI) were observed at 1 day and 1 month postoperatively compared to preoperative values (P < 0.05). CONCLUSION: Using 3D printing guides in modified unilateral puncture PVP is a safe and effective method for treating OVCF. And it has the advantages of short operation time, less fluoroscopy, even distribution of bone cement, and a low rate of paravertebral vein leakage.

The significance of the best puncture side bone cement/vertebral volume ratio to prevent paravertebral vein leakage of bone cement during vertebroplasty: a retrospective study.

OBJECTIVES: To verify the clinical significance of the best puncture-side bone cement/vertebral volume ratio (PSBCV/VV%) and bone cement leakage in paravertebral veins during vertebroplasty. METHODS: This was a retrospective analysis of a total of 210 patients from September 2021 to December 2022, who were divided into an observation group (110 patients) and a control group (100 patients). In the observation group, patients' preoperative computed tomography (CT) data were imported into Mimics software, and the VV was calculated using the three-dimensional (3D) reconstruction function. Then, based on the best PSBCV/VV% of 13.68% determined in a previous study, the optimal PSBCV to be injected during vertebroplasty was calculated. In the control group, vertebroplasty was performed directly using the conventional method. The incidence of cement leakage into paravertebral veins was observed postoperatively in both groups. RESULTS: There were no statistically significant differences (P > 0.05) in the evaluated indicators between the two groups pre- or postoperatively, including the anterior vertebral margin height, mid-vertebral height, injured vertebral Cobb angle, visual analogue scale (VAS) score, and Oswestry Disability Index (ODI). Intragroup comparisons showed improvements in the anterior vertebral height, mid-vertebral height, injured vertebral Cobb angle, VAS score, and ODI after surgery compared with before surgery (P < 0.05). In the observation group, there were 3 cases of cement leakage into the paravertebral veins, for a leakage rate of 2.7%. In the control group, there were 11 cases of cement leakage into the paravertebral veins, for a leakage rate of 11%. The difference in the leakage rate between the two groups was statistically significant (P = 0.016). CONCLUSION: In vertebroplasty, preoperative VV calculations using Mimics software, combined with calculation of the PSBCV according to the best PSBCV/VV% (13.68%), can effectively prevent leakage of bone cement into paravertebral veins and further prevent serious life-threatening complications such as pulmonary embolism.

Correlation analysis of the puncture-side bone cement/vertebral body volume ratio and bone cement leakage in the paravertebral vein in vertebroplasty.

OBJECTIVES: To explore the influencing factors of bone cement leakage in the paravertebral vein after vertebroplasty for the treatment of osteoporotic vertebral compression fractures (OVCFs) and to determine the correlation between the puncture-side bone cement/vertebral body volume ratio and bone cement leakage in the paravertebral vein. METHODS: This was a retrospective analysis of 495 patients (585 vertebral bodies) with OVCFs treated from August 2018 to May 2021 in our hospital. The patients' postoperative CT data were imported into Mimics software, and the three-dimensional(3D) reconstruction function was used to calculate the bone cement volume (BCV), puncture-side bone cement volume (PSBCV), and vertebral body volume (VBV); the bone cement/vertebral body volume ratio (BCV/VCV%) and puncture-side bone cement/vertebral body volume ratio (PSBCV/VCV%) were additionally calculated. Sex, Age, Body mass index(BMI), Bone density, BCV, PSBCV, VBV, BCV/VCV%, and PSBCV/VCV were compared between the leakage group and the non-leakage group. Logistic regression analysis was used to assess the correlations between the factors that statistically significantly differed between the two groups and the presence of leakage in the paravertebral veins. A receiver operating characteristic (ROC) curve was used to determine the diagnostic value of the PSBCV/VCV% and to obtain the optional cut-off value. RESULTS: A total of 102 males and 393 females with an average age of 72.89 (52 ~ 93) years were included in our study. There were 57 cases of cement leakage (59 vertebral bodies) in the paravertebral vein. There were 438 patients (526 vertebral bodies) without paravertebral cement leakage. Univariate analysis showed that the differences in sex, bone density, PSBCV, and PSBCV/VCV% between the two groups were statistically significant (P < 0.05). Logistic regression analysis showed that there were correlations between sex, bone density, and PSBCV/VCV% and the presence of paravertebral cement leakage (P < 0.05). The ROC curve showed that the area under the curve of the PSBCV/VCV% for the diagnosis of cement leakage in the paravertebral vein was greater than 0.65, and P < 0.05, indicating a diagnostic value. The best cut-off point for the diagnosis of paravertebral cement leakage with the PSBCV/VCV% was 13.68%, with a sensitivity of 84.7% and specificity of 37.8%. CONCLUSION: Sex, bone density, and PSBCV/VCV% are risk factors for cement leakage in the paravertebral veins after vertebroplasty for the treatment of OVCFs; the PSBCV/VCV% is strongly associated with paravertebral venous leakage, and the optimal PSBCV/VCV% is 13.68%. When the PSBCV/VCV% exceeds the optimal value, the risk of cement leakage in the paravertebral vein becomes significantly increased.

Electrospun Water-Borne Polyurethane Nanofibrous Membrane as a Barrier for Preventing Postoperative Peritendinous Adhesion.

Peritendinous adhesion is a major complication after tendon injury and the subsequent repairs or reconstructions. The degree of adhesion can be reduced by the interposition of a membranous barrier between the traumatized tendon and the surrounding tissue. In the present study, electrospun water-borne polyurethane (WPU) nanofibrous membranes (NFMs) were created for use after the reparation or reconstruction of tendons to reduce adhesion. In the electrospinning process, water was employed as the solvent for WPU, and this solvent was ecofriendly and nontoxic. The nanofibrous architecture and pore size of the WPU NFMs were analyzed. Their microporosity (0.78⁻1.05 µm) blocked the penetration of fibroblasts, which could result in adhesion and scarring around the tendon during healing. The release of WPU mimicked the lubrication effect of the synovial fluid produced by the synovium around the tendon. In vitro cell studies revealed that the WPU NFMs effectively reduced the number of fibroblasts that became attached and that there was no significant cytotoxicity. In vivo studies with the rabbit flexor tendon repair model revealed that WPU NFMs reduced the degree of peritendinous adhesion, as determined using a gross examination; a histological cross section evaluation; and measurements of the range of motion of interphalangeal joints (97.1 ± 14.7 and 79.0 ± 12.4 degrees in proximal and distal interphalangeal joints respectively), of the length of tendon excursion (11.6 ± 1.9 cm), and of the biomechanical properties.

[A dyslipidemia animal model induced by poloxamer 407 in golden hamsters and pilot study on the mechanism].

The aim of this study is to establish a simple and stable model like poloxamer 407 (P-407)-induced dyslipidemia of golden hamster model, and investigate the mechanism of lipid metabolism disturbance in this model. PPARalpha agonist and HMG-CoA reductase inhibitor were administrated to validate the efficacy on regulating lipid metabolism in the dyslipidemia golden hamster model. Six weeks male golden hamsters were chosen to inject P-407 intraperitoneally at a bolus dose of 300 mg x kg(-1), an intermittent injection at a dose of 200 mg x kg(-1) every 72 hours after the bolus. The results showed that P-407-induced golden hamster model characterized as increased serum triglyceride (TG), total cholesterol (TC), free cholesterol (free-CHO), cholesteryl ester (CE), free fatty acids (FFA) and apoB levels, and the hyperlipidemia state maintained at a stable level persistently. Meanwhile, augmented malondialdehyde (MDA) and nitric oxide (NO) level was observed. LCAT and SR-B I mRNA levels in liver of model group were down-regulated (expression ratio is 0.426; 0.783), while HMG-CoA reductase mRNA level was up-regulated (expression ratio is 1.493) compared with those of the normal group. The serum cholesterol and triglyceride levels were significantly lower in P-407-induced dyslipidemia hamster model after treated with atorvastatin (Ato) at a dose of 50 mg x kg(1) or fenofibrate (Fen) at 100 mg x kg(-1) for two weeks. These findings suggest that serum lipid distribution in dyslipidemia golden hamster is similar to that of human, and which may be relevant to the disturbance of the enzymes expression involved in lipid metabolism in liver. Results obtained from this study support the concept that dyslipidemia golden hamster may be an adequate animal model to evaluate the efficacy of lipid-lowering agents.

Total hip arthroplasty with a cementless acetabular component and a cemented femoral component in the treatment of Chinese patients with femoral head necrosis.

The purpose of this study was to evaluate midterm clinical and radiographic outcomes associated with hybrid total hip arthroplasty in a consecutive series of 86 Chinese patients (93 hips) with osteonecrosis of the femoral head, which revealed that the mean Harris hip score increased from 39 +/- 6.0 points before operation to 90.4 +/- 4.6 points at the latest follow-up. There was pelvic osteolysis in one hip (1%), which required revision, and some small focal areas of femoral osteolysis in 12 hips (13%) were observed. The mean linear wear rate was 0.143 +/- 0.05 mm/y (0.02-0.45 mm/y). No loosening of the components was observed radiographically. The survival rate of the acetabular and femoral components for revision was 98% (95% confidence interval, 0.96-1.0) and 100% (95% confidence interval, 0.95-1.0). Hybrid total hip arthroplasty in patients with osteonecrosis of the femoral head had a satisfactory clinical and radiographic outcome at a minimum 5 years of follow-up. Because polyethylene wear and osteolysis cannot be avoided, the long-term effect should be further studied.