Insufficient secretion of pancreatic FGF21 is the toxicological mechanism and therapeutic target of asparaginase-associated pancreatitis.

Asparaginase-associated pancreatitis (AAP) is a severe and potentially life-threatening drug-induced pancreas targeted toxicity in the combined chemotherapy of acute lymphoblastic leukemia among children and adolescents. The toxicological mechanism of AAP is not yet clear, and there are no effective preventive and treatment measures available clinically. Fibroblast growth factor 21 (FGF21) is a secretory hormone that regulates lipid, glucose, and energy metabolism balance. Acinar tissue is the main source of pancreatic FGF21 protein and plays an important role in maintaining pancreatic metabolic balance. In this study, we found that the decrease of FGF21 in pancreas is closely related to AAP. Pegaspargase (1 IU/g) induces widespread edema and inflammatory infiltration in the pancreas of rats/mice. The specific expression of FGF21 in the acinar tissue of AAP rats was significantly downregulated. Asparaginase caused dysregulation of the ATF4/ATF3/FGF21 axis in acinar tissue or cells, and thus mediated the decrease of FGF21. It greatly activated ATF3 in the acinar, which competed with ATF4 for the Fgf21 promoter, thereby inhibiting the expression of FGF21. Pharmacological replacement of FGF21 (1 mg/kg) or PERK inhibitors (GSK2656157, 25 mg/kg) can significantly mitigate the pancreatic tissue damage and reduce markers of inflammation associated with AAP, representing potential strategies for the prevention and treatment of AAP.

Surgical Stability After Proximal Segment Angle Alteration in Patients With Class III Facial Asymmetry.

PURPOSE: Patients with facial asymmetry often seek improved symmetry in lower face contour resulting in transverse movement of the proximal segments. The study aimed to investigate the association between transverse change in the proximal segments and postoperative relapse after the surgical correction of skeletal Class III facial asymmetry. METHODS: This retrospective cohort study includes consecutive patients with skeletal Class III asymmetry who underwent 2-jaw orthognathic surgery. The primary predictor variable was ramus plane angle (RPA). The patients were grouped as small (S group, <4°) and large (L group, ≥4°) changes in RPA. The primary outcome was the positional change of B point, menton, and the intergonial width. Cone-beam computed tomography images were obtained before surgery (T0), 1 week after surgery (T1), and debond (T2). Intergroup comparison was conducted with independent t test. Correlations between the variables were estimated by Pearson correlation. RESULTS: The study sample was composed of 60 subjects with 30 subjects in each study group. In the S group, the mean surgical changes of RPA were inward rotated 0.91° bilaterally. In the L group, the mean surgical changes of RPA were inward rotated 4.80° and 0.32° on the deviated and non-deviated side. After surgery, further minor inward adaptation of both sides was noted (<1 mm), and intergonial distance reduced with these changes in the proximal segments. By comparing the postsurgical stability between S and L group, the overall sagittal and vertical stability had no significant difference between 2 groups. However, the postsurgical transverse menton relapse (ΔMe in T2-T1) was significantly larger in L group (0.81 ± 1.40 mm) than S group (0.04 ± 1.32 mm) by 0.77 mm (P = .014). CONCLUSION: Greater surgical changes in the proximal segments had minor clinical effect on transverse stability. Minor transverse overcorrection of 1 mm is recommended in cases with severe facial symmetry with extensive changes in the proximal segments.

Comparison of the performance of various virtual articulator mounting procedures: a self-controlled clinical study.

OBJECTIVES: This clinical study aimed to compare the performance of various virtual articulator (VA) mounting procedures in the participants' natural head position (NHP). MATERIALS AND METHODS: Fourteen participants with acceptable dentitions and jaw relationships were recruited in this study registered in the Clinical Trials Registry (#NCT05512455; August 2022). A virtual facebow was designed for virtual mounting and hinge axis measurement. Intraoral scans were obtained, and landmarks were placed on each participant's face to register the horizontal plane in NHP. Six virtual mounting procedures were performed for each participant. The average facebow group (AFG) used an indirect digital procedure by using the average facebow record. The average mounting group (AMG) aligned virtual arch models to VA's average occlusal plane. The smartphone facial scan group (SFG) and professional facial scan group (PFG) used facial scan images with Beyron points and horizontal landmarks, respectively. The cone-beam computed tomography (CBCT) scan group (CTG) used the condyle medial pole, and horizontal landmarks were applied. The kinematic facebow group (KFG) served as the control group, and a direct digital procedure was applied using a kinematic digital facebow and the 3D skull model. Deviations of the reference plane and the hinge axis between the KFG and other groups were calculated. The inter-observer variability in virtual mounting software operation was then evaluated using the interclass correlation coefficient (ICC) test. RESULTS: In virtual condylar center deviations, the CTG had the lowest condylar deviations. The AFG showed larger condylar deviations than PFG, SFG, and CTG. There was no statistically significant difference between the AFG and the AMG and between the PFG and the SFG. In reference plane deviations, the AMG showed the largest angular deviation (8.23 ± 3.29°), and the AFG was 3.89 ± 2.25°. The angular deviations of PFG, SFG, and CTG were very small (means of each group < 1.00°), and there was no significant difference among them. There was no significant difference between the researchers, and the ICC test showed moderate to excellent reliability for the virtual condylar center and good to excellent reliability for the reference plane in the operation of the virtual mounting software. CONCLUSIONS: CBCT scan provided the lowest hinge axis deviation in virtual mounting compared to average mounting, facebow record, and facial scans. The performance of the smartphone facial scanner in virtual mounting was similar to that of the professional facial scanner. Direct virtual mounting procedures using horizontal landmarks in NHP accurately recorded the horizontal plane. CLINICAL RELEVANCE: Direct digital procedures can be reliably used for virtual articulator mounting. The use of a smartphone facial scanner provides a suitable and radiation-free option for clinicians.

Comparison of occlusal contact errors of 6 chairside CAD/CAM crowns: a self-controlled clinical study.

OBJECTIVES: The purpose of this self-controlled clinical study was to evaluate the trueness of occlusal contacts of chairside CAD/CAM crowns fabricated using different ceramic materials. MATERIALS AND METHODS: Ten volunteers (8 females, 2 males, average aged 20-30) were recruited in this study registered in the Clinical Trials Registry (#NCT05346744). After tooth preparation on tooth 36 or 46, an optical scan unit (CEREC Omnicam, Sirona Dental Systems, Germany) was utilized to perform the intraoral scanning. For each volunteer, 6 crowns were fabricated via the chairside CAD/CAM process (CEREC, Sirona Dental Systems, Germany) using the following materials: InCoris TZI (ZIR), Celtra Duo (CD), e.max CAD (EMA), UP.CAD (UP), Enamic (ENA) and Hyramic (HY). The microhardness of the milled surfaces was measured through a Vickers hardness Tester (HVS-50Z, Trojan, China). Together with the amount of occlusal adjustment, the occlusal contact trueness at both milling and postprocessing stages were quantitatively analyzed by using a high-precision scanner (ATOS, GOM Technologies, USA) and a reverse engineering software (Geomagic Control, 3D Systems, Rock Hill, SC). The times of chairside occlusal adjustment were also recorded. Data were analyzed by one-way analysis of variance (ANOVA) and ANOVA with randomized block design followed by Bonferroni test (p = 0.05). RESULTS: Significant differences were found in surface microhardness of the materials tested (CD > EMA ~ UP > ENA > HY > ZIR, p < 0.05). Regarding the occlusal contact trueness at milling stage, ZIR showed the lowest (p < 0.05), while no significant difference was found among others (p > 0.05). At postprocessing stage, except for ENA, the occlusal contact trueness of ZIR was significantly lower than that of others (p < 0.05). As for occlusal adjustment amount, ZIR was lower than CD and ENA (p < 0.05). In addition, ENA, HY and ZIR required fewer times of occlusal adjustment than EMA, UP and CD. CONCLUSIONS: The type of chairside CAD/CAM ceramic materials affected the occlusal contact trueness throughout the process of manufacturing and the amount of clinical occlusal adjustment as well. Zirconia exhibited the worst occlusal contact trueness at both milling and postprocessing stages, while the amount of occlusal adjustment was the least, which recommended the least occlusal compensation. CLINICAL RELEVANCE: For better trueness, different negative occlusal offsets are suggested to be applied in the design process, so as to suit the material of the restoration.

Reversal of pancreatic desmoplasia by a tumour stroma-targeted nitric oxide nanogel overcomes TRAIL resistance in pancreatic tumours.

OBJECTIVE: Stromal barriers, such as the abundant desmoplastic stroma that is characteristic of pancreatic ductal adenocarcinoma (PDAC), can block the delivery and decrease the tumour-penetrating ability of therapeutics such as tumour necrosis factor-related apoptosis-inducing ligand (TRAIL), which can selectively induce cancer cell apoptosis. This study aimed to develop a TRAIL-based nanotherapy that not only eliminated the extracellular matrix barrier to increase TRAIL delivery into tumours but also blocked antiapoptotic mechanisms to overcome TRAIL resistance in PDAC. DESIGN: Nitric oxide (NO) plays a role in preventing tissue desmoplasia and could thus be delivered to disrupt the stromal barrier and improve TRAIL delivery in PDAC. We applied an in vitro-in vivo combinatorial phage display technique to identify novel peptide ligands to target the desmoplastic stroma in both murine and human orthotopic PDAC. We then constructed a stroma-targeted nanogel modified with phage display-identified tumour stroma-targeting peptides to co-deliver NO and TRAIL to PDAC and examined the anticancer effect in three-dimensional spheroid cultures in vitro and in orthotopic PDAC models in vivo. RESULTS: The delivery of NO to the PDAC tumour stroma resulted in reprogramming of activated pancreatic stellate cells, alleviation of tumour desmoplasia and downregulation of antiapoptotic BCL-2 protein expression, thereby facilitating tumour penetration by TRAIL and substantially enhancing the antitumour efficacy of TRAIL therapy. CONCLUSION: The co-delivery of TRAIL and NO by a stroma-targeted nanogel that remodels the fibrotic tumour microenvironment and suppresses tumour growth has the potential to be translated into a safe and promising treatment for PDAC.

Comparative analysis of leaching residual monomer and biological effects of four types of conventional and CAD/CAM dental polymers: an in vitro study.

OBJECTIVES: The objective of this study is to investigate leaching residual monomer and biological effects of four types of conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) dental polymers on human gingival fibroblasts (HGFs). MATERIALS AND METHODS: A total of 540 disk-shaped specimens were fabricated from four different materials (n=135 per group): compression-molding polymethylmethacrylate (PMMA) (conventional denture polymer), CAD/CAM PMMA (CAD/CAM denture polymer), bis-acrylic composite resin (conventional temporary polymer), and CAD/CAM PMMA (CAD/CAM temporary polymer). Specimens were eluted in cell culture medium for 72 h at 37°C, and the residual monomer in eluates subsequently was measured by high-performance liquid chromatography (HPLC). The biological effects of material eluates on HGFs were analyzed by CCK-8 assay, flow cytometry, real-time quantitative PCR, Western blotting, and enzyme-linked immunosorbent assay (ELISA) to identify cell death patterns and its biological mechanism. RESULTS: Methyl methacrylate (MMA) was detected only in compression-molding PMMA, and by-products were detected in bis-acrylic composite resin. The cell proliferation of CAD/CAM denture polymer or CAD/CAM temporary polymer was greater than that of compression-molding PMMA or bis-acrylic composite resin at 72 h in culture. No apoptosis and necrosis were detected in CAD/CAM dental polymers. Apoptosis was detected only in bis-acrylic composite resin and further confirmed by the upregulation of Bax and cleaved Caspase-3, as well as the downregulation of Bcl-2 gene. And no significant variation in inflammatory cytokines secretion was observed in all materials. CONCLUSIONS: CAD/CAM dental polymers (including temporary and denture polymers) have favorable biocompatibility due to lower residual monomer, which provides scientific evidence to the controversy of biocompatibility of conventional and CAD/CAM dental polymers. CLINICAL RELEVANCE: The use of CAD/CAM dental polymers is recommended in the fabrication of temporary restorations and dentures due to their favorable biocompatibility.

In vitro study of surface properties and microbial adhesion of various dental polymers fabricated by different manufacturing techniques after thermocycling.

OBJECTIVES: The study aims to investigate surface properties and microbial adhesion of various dental polymers fabricated by different manufacturing techniques before and after thermocycling. MATERIALS AND METHODS: The following six materials were used to fabricate disk-shaped specimens: conventional denture polymer (Vertex Acrylic Resin, VAR), CAD/CAM denture polymer (Organic PMMA eco Pink, OP), conventional temporary polymer (Protemp™ 4, PT), CAD/CAM temporary polymer (Die Material, DM), conventional denture framework polymer (BioHPP, PB), and CAD/CAM denture framework polymer (breCAM.BioHPP, CB). The specimens were tested before and after thermocycling (5000 and 10,000 cycles, 5 °C/55 °C). Surface roughness (SR), hydrophobicity, and surface topography were determined by profilometry, water contact angle, and scanning electron microscopy (SEM). Then specimens were incubated with Staphylococcus aureus, Streptococcus mutans, and Candida albicans for 24 h, respectively. Microbial adhesion was assessed using colony-forming unit counts, XTT assay, and SEM. RESULTS: SR and hydrophobicity of VAR group were higher than that of OP group. S. aureus and C. albicans adhesion on VAR and PT groups were higher than that on OP and DM groups, respectively. There was no difference in surface properties and microbial adhesion between PB and CB groups. After thermocycling, SR (expect OP group) of all materials increased and hydrophobicity decreased, and the amount and activity of S. aureus and C. albicans adhesion also increased. The adhesion of S. aureus and C. albicans showed a moderate positive correlation with SR, independent of hydrophobicity. CONCLUSIONS: CAD/CAM denture polymers and temporary polymers showed less S. aureus and C. albicans adhesion when compared to conventional ones, which were mainly affected by surface roughness, independent of hydrophobicity. Thermocycling could increase surface roughness, decrease hydrophobicity, and affect microbial adhesion of the materials. CLINICAL SIGNIFICANCE: CAD/CAM dental polymers may be a better choice for the manufacture of temporary restorations and dentures to reduce microbial adhesion.

Outcomes of Treatment With Manipulative Reduction Combine With the Disc-condyle Repositioning Splint in Acute Anterior Disc Displacement Without Reduction.

ABSTRACT: In this report, the authors describe a case of the acute anterior disc displacement without reduction treated by manipulative reduction combined with the disc-condyle repositioning splint to improve the limited mouth opening and relieve the pain, including diagnostic images and treatment performed.

Clinical Effects of the Combination of Rhytidectomy and Temporomandibular Joint Disc Repositioning Surgery.

OBJECTIVE: This study aims to investigate the clinical effects of the combination of rhytidectomy and temporomandibular joint (TMJ) disc repositioning surgery in internal derangement (ID) stage IV-V and facial aging patients. METHODS: Eighteen facial aging with bilateral ID IV-V patients were enrolled in this study. All of them had undergone temporomandibular disc repositioning surgery and rhytidectomy by the same surgeon (Yao Min Zhu). Pre-/post-surgical clinical manifestations, facial photography, radiographic data were recorded and analyzed, as well as doctor, patient, third-party evaluation of postsurgical facial appearance satisfaction. RESULTS: The average age of 18 female patients was 52.9. The average of presurgical visual analog pain scale score was 5.94, ranged from 4 to 8. After 6 months, the average of postsurgical visual analog pain scale score was 0.28, ranged from 0 to 1 ( P   >  0.05). The average maximal mouth opening of presurgical and postsurgical was 2.19 and 3.29 cm, ranged from 1.2 to 2.8 cm and 3.0 to 3.5 cm, respectively ( P  < 0.05). Postoperative magnetic resonance imaging showed the location of the bilateral TMJ discs directly above the mandibular condyle. The satisfaction rate of doctors, patients and third-party with facial appearance was 95% to 98%, 96% to 99% and 96% to 99%, respectively, with an average of 95.72%, 98.11%, and 97.50%. CONCLUSIONS: For patients with bilateral ID IV-V and facial aging, the combination of disc repositioning surgery and rhytidectomy is a very feasible procedure to treat TMJ disorders and improve patients' facial appearance and satisfaction.

Implantable Immunosuppressant Delivery to Prevent Rejection in Transplantation.

An innovative immunosuppressant with a minimally invasive delivery system has emerged in the biomedical field. The application of biodegradable and biocompatible polymer forms, such as hydrogels, scaffolds, microspheres, and nanoparticles, in transplant recipients to control the release of immunosuppressants can minimize the risk of developing unfavorable conditions. In this review, we summarized several studies that have used implantable immunosuppressant delivery to release therapeutic agents to prolong allograft survival. We also compared their applications, efficacy, efficiency, and safety/side effects with conventional therapeutic-agent administration. Finally, challenges and the future prospective were discussed. Collectively, this review will help relevant readers understand the different approaches to prevent transplant rejection in a new era of therapeutic agent delivery.

Comparative analysis of the surface properties and corrosion resistance of Co-Cr dental alloys fabricated by different methods.

STATEMENT OF PROBLEMS: The complex oral environment leads to the corrosion of dental alloy materials and the release of metal ions that may have a negative impact on health. Digital manufacturing is increasingly being used in dentistry, but whether digitally manufactured prostheses have better resistance to corrosion than traditional cast prostheses is unclear. PURPOSE: The purpose of this in vitro study was to determine the surface properties and corrosion resistance of dental cobalt-chromium (Co-Cr) alloys fabricated by lost-wax casting (CAST), selective laser melting (SLM), and computer numerical control milling (CNC). MATERIAL AND METHODS: The surface characteristics of the specimens were analyzed via scanning electron microscopy and energy-dispersive spectroscopy (SEM-EDS), metallurgical observation, and X-ray diffraction (XRD). For corrosion resistance, the specimens were immersed in artificial saliva at a pH 2.3 and 6.8 for 1, 4, and 7 weeks. Then, inductively coupled plasma-mass spectrometry (ICP-MS) was used to detect the main metal ion. Electrochemical impedance spectroscopy (EIS) was conducted based on a 3-electrode system to assess the electrochemical corrosion resistance. An ANOVA test was used to evaluate statistically significant differences among the groups (α=.05). RESULTS: The SLM and CNC specimens showed more homogenous microstructures, less ion release at different times and pH, and more charge transfer resistance than CAST specimens. CONCLUSIONS: Compared with casting, SLM-printing and CNC-milling have advantages in terms of surface properties and corrosion resistance.

Sequential digital occlusal analysis in patients with skeletal Class III malocclusion with orthognathic surgery: Surgery-first vs orthodontic-first approach.

INTRODUCTION: This study compared changes in occlusal characteristics in patients with skeletal Class III malocclusion with surgery-first approach (SFA) and those with orthodontic-first approach (OFA) through digital occlusal analysis. METHODS: In this prospective study, 90 consecutive subjects were divided into control, OFA, and SFA groups (30 per group). Force discrepancy, occlusal time, tooth contact, center of force, and force-time graph pattern were calculated for all samples using the T-Scan III system. Between-group differences were analyzed using a 1-way analysis of variance and generalized estimating equations. These parameters were calculated at the following time points: preoperatively, 1-month postoperatively (T1), 4-months postoperatively, and 1-year postoperatively (T3). RESULTS: No significant differences were observed in the parameters between the experimental groups. The force discrepancy of the OFA and SFA groups decreased, approaching the value of controls at T3. The occlusal time significantly increased at T1 and progressively decreased at T3. The initial contact and maximum force were most frequently observed on molars, and its maximum force significantly decreased by 5.72% and 7.40% in the OFA and SFA groups at T3, respectively. The number of tooth contact was significantly reduced at T1 and gradually increased at T3. Moreover, after surgery, the force-time graph pattern was normalized, and the center of force tended to be more centric; however, the most frequent trajectory revealed premature contact during closing. CONCLUSIONS: No significant difference was found in all parameters between the OFA and SFA groups. Occlusion deteriorated at 1 month postoperatively but gradually improved at 1 year postoperatively, approaching the controls.

Impact of the Different Types of Le Fort I Maxillary Surgical Movement on Nasal Width Changes: A Photogrammetric Analysis.

BACKGROUND: Le Fort I maxillary movements affect nasal width, but nasal width changes with specific movement types have not been formally addressed to date. OBJECTIVES: The purpose of this study was to analyze and compare the changes in nasal width with different maxillary movements. METHODS: A retrospective study was performed among consecutive patients who underwent bimaxillary orthognathic surgery (n = 138) and who were grouped based on the type of maxillary movement (ie, maxillary advancement with intrusion [MAI], maxillary advancement with extrusion [MAE], and maxillary setback with intrusion [MSI]). Preoperative and 12-month postoperative nasal widths were analyzed photogrammetrically by 2 blinded evaluators. RESULTS: Maxillary advancement with intrusion and MAE presented a significantly (P < 0.05) higher alar base widening than MSI did, with no significant (P > 0.05) differences between MAI and MAE. Maxillary advancement movements (MAI and MAE) showed significantly (P < 0.05) higher alar base widening than maxillary setback movement (MSI). However, no significant (P > 0.05) difference was observed between maxillary intrusion (MAI and MSI) and maxillary extrusion (MAE) movements. CONCLUSIONS: This study shows that the nasal width varies distinctly depending on the type of Le Fort I maxillary surgical movement.

Accurate and Real-Time Temperature Monitoring during MR Imaging Guided PTT.

Photothermal therapy (PTT) is an efficient approach for cancer treatment. However, accurately monitoring the spatial distribution of photothermal transducing agents (PTAs) and mapping the real-time temperature change in tumor and peritumoral normal tissue remain a huge challenge. Here, we propose an innovative strategy to integrate T1-MRI for precisely tracking PTAs with magnetic resonance temperature imaging (MRTI) for real-time monitoring temperature change in vivo during PTT. NaBiF4: Gd@PDA@PEG nanomaterials were synthesized with favorable T1-weighted performance to target tumor and localize PTAs. The extremely weak susceptibility (1.04 × 10-6 emu g-1 Oe1-) of NaBiF4: Gd@PDA@PEG interferes with the local phase marginally, which maintains the capability of MRTI to dynamically record real-time temperature change in tumor and peritumoral normal tissue. The time resolution is 19 s per frame, and the detection precision of temperature change is approximately 0.1 K. The approach achieving PTT guided by multimode MRI holds significant potential for the clinical application.

Skeletofacial Reconstruction for Cleft-Related Deformities: Four Decades of Evolving Cleft Care.

Skeletofacial reconstruction in skeletally mature patients with cleft lip/palate can be challenging because of multifaceted condition-specific anatomical features in addition to several repercussions from surgical intervention during the growing period. This surgical report presents the history and evolving philosophy of cleft-skeletofacial reconstruction at the Chang Gung Craniofacial Center, a referral center for cleft care in Taiwan. The maximization of satisfactory function and the appearance outcome-burden ratio have been the fundamental aims for this team to develop and upgrade cleft-skeletofacial reconstruction over the past 4 decades, with more than 10,000 mature patients treated. The study highlights key lessons learned in outcome-based and patient-oriented changes over time until the current approach, which focuses on patient-centered care with a comprehensive, multidisciplinary, and team-based model. Substantial advances in surgical, orthodontic, anesthetic, and computer imaging aspects have contributed to improving and optimizing the correction of a broad spectrum of facial and occlusal deformities while ensuring safety, predictability, efficiency, and stability in outcomes. Understanding the development and refinement of cleft-skeletofacial reconstruction over the time and transferring these time-tested and scientifically validated protocols and principles to clinical practice may serve as a reliable foundation to continue the advancement and enhancement of the delivery of surgical cleft care worldwide.

History and Evolution of Orthognathic Surgery at Chang Gung Craniofacial Center: Lessons Learned From 35-Year Experience.

BACKGROUND: Modern orthognathic surgery (OGS) was established on the basis of contributions from multidisciplinary centers worldwide. This study reports the history and evolution of OGS at the Chang Gung Craniofacial Center (CGCC) and identifies the lessons learned from 35 years of experience. METHODS: The total number of OGS procedures managed by the CGCC multidisciplinary team between 1981 and 2016 was determined. The database of the senior author (Y.-R.C.) was reviewed for consecutive OGS procedures performed between 2003 and 2016. A literature review was also performed to retrieve the contributions from the total CGCC team. RESULTS: The 35 years of experience at a single center and 13-year experience of a single surgeon corresponded to 8073 and 2883 OGS procedures, respectively. Moreover, 53 peer-reviewed articles were reviewed. Teamwork (plastic surgeons, orthodontists, and anesthetists) ensured an optimal balance between occlusion functional and facial aesthetic outcomes, with patient safety ensured and a minimum of OGS-related complications. Progression from the conventional orthodontics-first approach to the surgery-first OGS approach decreased the overall treatment time. Transition from 1-jaw to 2-jaw surgery enabled more consistent aesthetic outcomes to be achieved. Conversion from the 2-splint to the single-splint technique enabled development of a more precise tridimensional simulation plan and surgical execution, including in challenging scenarios such as malocclusion associated with facial asymmetry. Clockwise pitch rotation of the maxillomandibular complex has been designed for facial aesthetic purposes in class III malocclusion, whereas counterclockwise pitch rotation of the maxillomandibular complex improves airway function in those with sleep apnea. CONCLUSIONS: The lessons learned from experience and outcome-based articles reveal that OGS has successfully evolved at the CGCC, with a balance being achieved between functional and aesthetic outcomes and effective decreases in the burden of care (ie, morbidity, complications, and treatment time).

Stress and its association with academic performance among dental undergraduate students in Fujian, China: a cross-sectional online questionnaire survey.

BACKGROUND: The aim of this study was to investigate the amount and sources of stress in dental undergraduate students in Fujian, China, and the factors associated with stress. METHODS: This cross-sectional study was conducted during the second semester of the 2017-2018 academic year at the School of Stomatology, Fujian Medical University, China. A total of 396 students were surveyed with the Dental Environment Stress Questionnaire (DES) and the Perceived Stress Scale (PSS) using an online survey system. The participants' demographic information, including sex, age, year of study, and grade point average (GPA) was also collected. One-way analysis of variance (ANOVA) was performed to compare the stress scores. Pearson correlation and multiple linear regression analyses were conducted to explore the associated factors of stress and academic performance. All statistical analyses were performed at a significance level of 5%. RESULTS: A total of 347 undergraduate students participated in the present study, for a response rate of 87.6%. There were no significant differences in the DES and PSS total scores among students of different grades and sexes. Significant differences were found in the DES "workload" and "self-efficacy beliefs" scores among students from different study years (all P < 0.05). The Multiple linear regression showed that DES and PSS scores were negatively correlated with GPA, while sex was positively correlated with GPA (all P < 0.05). Female students had significantly higher GPAs than male students. CONCLUSIONS: Dental undergraduates in Fujian, China experienced moderate levels of stress. While the amount of stress did not differ by year of study, the sources of stress did differ. Stress scores and sex were negatively correlated with academic performance.

Comparison of smile esthetics among celebrities, dentists, and dental students in a Han Chinese population.

STATEMENT OF PROBLEM: Various components of smile esthetics have been evaluated. However, whether these components affect smile esthetics in Han Chinese celebrities, dentists, and dental students is unknown. PURPOSE: The purpose of this study was to evaluate the smile esthetics of celebrities, dentists, and dental students in a Han Chinese population. MATERIAL AND METHODS: Frontal images of smiles were obtained from the Internet for the celebrity group, while images of dentists and dental students were collected for the dentist and dental student groups. The buccal and posterior corridor ratios, the alignment discrepancy between the commissural and interpupillary lines, the number of teeth revealed, the width ratio relative to the golden proportion, and the width-to-length ratios of maxillary anterior teeth were calculated by using a photo-editing software program. Statistical analysis was performed by using 2-way ANOVA and the Tukey HSD test (α=.05). RESULTS: Eligible images were obtained for 81 celebrities, 83 dentists, and 78 dental students. The celebrities were found to have the highest buccal and posterior corridor ratios and reveal the least teeth in the smile among the 3 groups (all P<.001). The alignment discrepancy for celebrities was significantly less than that for dental students (P=.025). Moreover, the absolute difference of width ratios from the golden proportion was significantly different from 0 for all groups (all P<.001). CONCLUSIONS: Significant differences were found in the smiles of Han Chinese celebrities, dentists, and dental students in regard to the buccal and posterior corridor ratios, the alignment discrepancy between the commissural and interpupillary lines, and the number of teeth revealed. Chinese celebrities tended to have a smile that displays to the second premolar, with a medium buccal corridor width.

A Self-Healing Polymer with Fast Elastic Recovery upon Stretching.

The design of polymers that exhibit both good elasticity and self-healing properties is a highly challenging task. In spite of this, the literature reports highly stretchable self-healing polymers, but most of them exhibit slow elastic recovery behavior, i.e., they can only recover to their original length upon relaxation for a long time after stretching. Herein, a self-healing polymer with a fast elastic recovery property is demonstrated. We used 4-[tris(4-formylphenyl)methyl]benzaldehyde (TFPM) as a tetratopic linker to crosslink a poly(dimethylsiloxane) backbone, and obtained a self-healing polymer with high stretchability and fast elastic recovery upon stretching. The strain at break of the as-prepared polymer is observed at about 1400%. The polymer can immediately recover to its original length after being stretched. The damaged sample can be healed at room temperature with a healing efficiency up to 93% within 1 h. Such a polymer can be used for various applications, such as functioning as substrates or matrixes in soft actuators, electronic skins, biochips, and biosensors with prolonged lifetimes.

In Vivo Environment-Adaptive Nanocomplex with Tumor Cell-Specific Cytotoxicity Enhances T Cells Infiltration and Improves Cancer Therapy.

Drug delivery strategies possessing selectivity for cancer cells are eagerly needed in therapy of metastatic breast cancer. In this study, the chemotherapeutic agent, docetaxel (DTX), is conjugated onto heparan sulfate (HS). Aspirin (ASP), which has the activity of anti-metastasis and enhancing T cells infiltration in tumors, is encapsulated into the HS-DTX micelle. Then the cationic polyethyleneimine (PEI)-polyethylene glycol (PEG) copolymer binds to HS via electrostatic force, forming the ASP-loaded HS-DTX micelle (AHD)/PEI-PEG nanocomplex (PAHD). PAHD displays long circulation behavior in blood due to the PEG shell. Under the tumor microenvironment with weakly acidic pH, PEI-PEG separates from AHD, and the free cationic PEI-PEG facilitates the cellular uptake of AHD by increasing permeability of cell membranes. Then the overexpressed heparanase degrades HS, releasing ASP and DTX. PAHD shows specific toxicity toward tumor cells but not normal cells, with advanced activity of inhibiting tumor growth and lung metastasis in 4T1 tumor-bearing mice. The number of CD8+ T cells in tumor tissues is also increased. Therefore, PAHD can become an efficient drug delivery system for breast cancer treatment.