Correlation between patient satisfaction and color changes after tooth bleaching.

OBJECTIVE: This study aimed to investigate the relationship between patient satisfaction of outcomes and tooth color changes during and after tooth bleaching. METHODS: In this clinical trial, 63 volunteers participated in an in-office bleaching procedure using a 40% hydrogen peroxide gel. The treatment consisted of two sessions, each comprising two 30-min applications of the bleaching gel. The L*, a*, and b* values of six maxillary anterior teeth were measured at baseline (T1), after the first bleaching session (T2), after the second bleaching session (T3), 1 week after the second in-office bleaching session (T4), and 3 weeks after the second in-office bleaching session (T5). The color differences (ΔE00 ) were calculated using CIEDE2000. A satisfaction scale with a score ranging from 0 to 3 was used to record participants' level of satisfaction with their tooth color at each time point. The data were statistically analyzed using repeated measures analysis of variance and logistic regression (α = 0.05). RESULTS: Significant correlations were observed between ΔL*, Δb*, and ΔE00 values at T3 and patient satisfaction (all p < 0.05). The regression model indicated a more pronounced impact of Δb* on patient satisfaction compared to ΔL*. The established regression models were as follows: Logit (PL*b* ) = -4.354 + 0.271ΔL* - 0.585Δb* and Logit (PΔE00 ) = -2.552 + 0.521ΔE00 . The findings suggested a minimum ΔE00 value of 4.90 for satisfactory results. A minimum ΔE00 value of 3.9, 5.0, and 6.8 was necessary for central incisors, lateral incisors, and canines, respectively, to achieve a satisfactory result. CONCLUSIONS: The ΔL*, Δb*, and ΔE00 values were found to be significantly correlated with patient satisfaction after bleaching. Δb* was identified as having a greater influence on patient satisfaction than ΔL* values in the regression model. Furthermore, attaining a minimum ΔE00 value of 4.90 is necessary to achieve satisfactory outcomes. A greater ΔE00 value is needed for canines than for incisors to achieve equivalent patient satisfaction. CLINICAL SIGNIFICANCE: This study emphasizes the importance of considering the extent of color change needed to achieve patient satisfaction after tooth bleaching procedures.

Enhanced tooth bleaching with a hydrogen peroxide/titanium dioxide gel.

BACKGROUND: This study aimed to explore the effects of the titanium dioxide (TiO2) concentration and particle size in hydrogen peroxide (HP) on tooth bleaching effectiveness and enamel surface properties. METHODS: TiO2 at different concentrations and particle sizes was incorporated into 40% HP gel to form an HP/TiO2 gel. The specimens were randomly divided into 8 groups: C1P20: HP + 1% TiO2 (20 nm); C3P20: HP + 3% TiO2 (20 nm); C5P20: HP + 5% TiO2 (20 nm); C1P100: HP + 1% TiO2 (100 nm); C3P100: HP + 3% TiO2 (100 nm); C5P100: HP + 5% TiO2 (100 nm); C0: HP with LED; and C0-woL: HP without LED. Bleaching was conducted over 2 sessions, each lasting 40 min with a 7-day interval. The color differences (ΔE00), whiteness index for dentistry (WID), surface microhardness, roughness, microstructure, and composition were assessed. RESULTS: The concentration and particle size of TiO2 significantly affected ΔE00 and ΔWID values, with the C1P100 group showing the greatest ΔE00 values and C1P100, C3P100, and C5P100 groups showing the greatest ΔWID values (p < 0.05). No significant changes were observed in surface microhardness, roughness, microstructure or composition (p > 0.05). CONCLUSIONS: Incorporating 1% TiO2 with a particle size of 100 nm into HP constitutes an effective bleaching strategy to achieve desirable outcomes.

Identification and Parametrization of Key Factors Affecting Levoglucosan Emission During Solid Fuel Burning.

Levoglucosan (LG) is a pyrolysis product of cellulose and hemicellulose at low combustion temperatures. However, LG release cannot be determined only by considering the contents of cellulose and hemicellulose exclusively due to the complexity of combustion processes and the physical-chemical properties of the fuel. This study detected the emission factors (EFs) of LG from 22 different solid fuel samples (including coal and biomass) by considering 18 different fuel properties and five combustion parameters. The average LGEFs during solid fuel burning varied in a range of 0.03-136 mg kg-1, with a magnitude difference of 1-4 orders. While the variations in cellulose (59.5-368 mg g-1) and hemicellulose (73.5-165 mg g-1) contents of fuel samples were only one- to 6-fold. A short combustion duration (<150 min) and a medium combustion temperature (200-400 °C) influenced by volatile and ash contents are crucial for the generation and accumulation of LG. A random forest coupled with the Akaike information criterion stepwise regression model successfully explained 96% of the total LG emission variation using three variables (ash content, cellulose content, and modified combustion efficiency). The ash content promoted coke formation and LG chain cracking by increasing the pyrolysis temperature and is considered the most important factor. The alkali metal in ash can reduce the energy barrier of intramolecular ring contraction reactions and inhibit the dehydration reactions, which led to additional heat being utilized by the competitive pathways of LG formation. This study provided a method to address the parametrization and release mechanisms of combustion source emissions.

Deep learning-based prediction of mandibular growth trend in children with anterior crossbite using cephalometric radiographs.

BACKGROUND: It is difficult for orthodontists to accurately predict the growth trend of the mandible in children with anterior crossbite. This study aims to develop a deep learning model to automatically predict the mandibular growth result into normal or overdeveloped using cephalometric radiographs. METHODS: A deep convolutional neural network (CNN) model was constructed based on the algorithm ResNet50 and trained on the basis of 256 cephalometric radiographs. The prediction behavior of the model was tested on 40 cephalograms and visualized by equipped with Grad-CAM. The prediction performance of the CNN model was compared with that of three junior orthodontists. RESULTS: The deep-learning model showed a good prediction accuracy about 85%, much higher when compared with the 54.2% of the junior orthodontists. The sensitivity and specificity of the model was 0.95 and 0.75 respectively, higher than that of the junior orthodontists (0.62 and 0.47 respectively). The area under the curve value of the deep-learning model was 0.9775. Visual inspection showed that the model mainly focused on the characteristics of special regions including chin, lower edge of the mandible, incisor teeth, airway and condyle to conduct the prediction. CONCLUSIONS: The deep-learning CNN model could predict the growth trend of the mandible in anterior crossbite children with relatively high accuracy using cephalometric images. The deep learning model made the prediction decision mainly by identifying the characteristics of the regions of chin, lower edge of the mandible, incisor teeth area, airway and condyle in cephalometric images.

Revealing How Polyvinyl Chloride Microplastic Physicochemically Affect the Anaerobic Digestion of Waste Activated Sludge.

Recent studies have shown that the microplastics in waste activated sludge (WAS) can directly reduce the microbial activity and influence the performance of anaerobic digestion. Unfortunately, few studies paid attention on the interactions between WAS and MPs, since MPs could impact the contact between sludge flocs and microorganisms. We found that PVC-MP changed the interfacial energy properties of the WAS surface and affected methane production. Low concentration (40 mg/L) of PVC-MP changed the water affinity and greatly reduced the energy barrier of interfacial reaction. Simultaneously, WAS surface charge characteristics changed with increasing MPs concentration, which made the sludge difficult to contact with microorganisms. The change process of WAS surface functional groups also indicated that PVC-MP first cover the sludge surface to prevent from being utilized by microorganisms, and then affect the surface protein structure before toxic substances leaching. Our study provides new insights into how MPs affect anaerobic digestion.

[Establishment of a quantitative method for GC analysis of polyoxyethylene (35) castor oil in microemulsion extracts].

With the continuous exploration of microemulsions as solvents for traditional Chinese medicine extraction, polyoxyethy-lene(35) castor oil(CrEL), a commonly used surfactant, is being utilized by researchers. However, the problem of detecting residues of this surfactant in microemulsion extracts has greatly hampered the further development of microemulsion solvents. Based on the chemical structures of the components in CrEL and the content determination method of castor oil in the 2020 edition of the Chinese Pharmacopoeia(Vol. Ⅳ), this study employed gas chromatography(GC) and single-factor experiments to optimize the preparation method of methyl ricinoleate from CrEL. The conversion coefficient between the two was validated, and the optimal sample preparation method was used to process microemulsion extracts of Zexie Decoction from three batches. The content of methyl ricinoleate generated was determined, and the content of CrEL in the microemulsion extracts of Zexie Decoction was calculated using the above conversion coefficient. The results showed that the optimal preparation method for CrEL was determined. Specifically, 10 mL of 1 mol·L~(-1) KOH-methanol solution was heated at 60 ℃ for 15 min in a water bath. Subsequently, 10 mL of boron trifluoride etherate-methanol(1∶3) solution was heated at 60 ℃ for 15 min in a water bath, followed by extraction with n-hexane twice. CrEL could stably produce 20.84% methyl ricinoleate. According to this conversion coefficient, the average mass concentration of CrEL in the three batches of Zexie Decoction microemulsion extracts was 11.94 mg·mL~(-1), which was not significantly different from the CrEL mass concentration of 11.57 mg·mL~(-1) during microemulsion formulation, indicating that the established content determination method of this study was highly accurate, sensitive, and repeatable. It can be used for subsequent research on microemulsion extracts of Zexie Decoction and provide a reference for quality control of other drug formulations containing CrEL.

Biodegradable Ru-Containing Polycarbonate Micelles for Photoinduced Anticancer Multitherapeutic Agent Delivery and Phototherapy Enhancement.

The lack of selectivity between tumor and healthy cells, along with inefficient reactive oxygen species production in solid tumors, are two major impediments to the development of anticancer Ru complexes. The development of photoinduced combination therapy based on biodegradable polymers that can be light activated in the "therapeutic window" would be beneficial for enhancing the therapeutic efficacy of Ru complexes. Herein, a biodegradable Ru-containing polymer (poly(DCARu)) is developed, in which two different therapeutics (the drug and the Ru complex) are rationally integrated and then conjugated to a diblock copolymer (MPEG-b-PMCC) containing hydrophilic poly(ethylene glycol) and cyano-functionalized polycarbonate with good degradability and biocompatibility. The polymer self-assembles into micelles with high drug loading capacity, which can be efficiently internalized into tumor cells. Red light induces the generation of singlet oxygen and the release of anticancer drug-Ru complex conjugates from poly(DCARu) micelles, hence inhibiting tumor cell growth. Furthermore, the phototherapy of polymer micelles demonstrates remarkable inhibition of tumor growth in vivo. Meanwhile, polymer micelles exhibit good biocompatibility with blood and healthy tissues, which opens up opportunities for multitherapeutic agent delivery and enhanced phototherapy.

A Lignin-Based Carbon Anode with Long-Cycle Stability for Li-Ion Batteries.

Due to its wide source and low cost, biomass-based hard carbon is considered a valuable anode for lithium-ion batteries (LIBs). Lignins, as the second most abundant source in nature, are being intensively studied as candidate anode materials for next generation LIBs. However, direct carbonization of pure lignin usually leads to low specific surface area and porosity. In this paper, we design a porous carbon material from natural lignin assisted by sacrificing a metal-organic framework (MOF) as the template. The MOF nanoparticles can disperse the lignin particles uniformly and form abundant mesopores in the composites to offer fast transfer channels for Li+. The as-prepared carbon anode shows a high specific capacity of 420 mAh g-1 with the capacity retention of 99% after 300 cycles at 0.2 A g-1. Additionally, it keeps the capacity retention of 85% after long cycle of 1000 cycles, indicating the good application value of the designed anode in LIBs. The work provides a renewable and low-cost candidate anode and a feasible design strategy of the anode materials for LIBs.

[Recent Developments and Future Directions of Oral Healthcare System and Dental Public Health System in China in Light of the Current Global Emergency].

The study is aimed to help promote the development of the oral healthcare system and dental public health system in China and to help achieve the goal of improving the nation's oral health. We herein provided an overview and critical evaluation of recent developments in oral healthcare systems and dental public health systems in China and other countries, and discussed a number of potential directions for the future development of dental public health. The current global public health emergency of the coronavirus disease 2019 (COVID-19) pandemic was also taken into account in our discussions. Thus, to facilitate the accomplishment of the goals of the Healthy China 2030 Program, we suggested the establishment of a community-based, prevention-oriented model for the oral healthcare system and dental public health system. The model we proposed features the integration of oral and general health services, the utilization of technological innovations and big data concerning health, and a forceful promotion of remote dental services focused on prevention and early diagnosis and treatment. Furthermore, under the background of COVID-19 becoming a normal part of people's lives, we should adopt differentiated prevention and protection measures and emergency response preplans appropriate for the actual epidemic situation of a particular region so that clinical services are strengthened while unnecessary wastes of resources are avoided. We should actively explore for alternative approaches to care in the face of special circumstances.

Double attack strategy for leukemia using a pre-targeting bispecific antibody (CD20 Ab-mPEG scFv) and actively attracting PEGylated liposomal doxorubicin to enhance anti-tumor activity.

BACKGROUND: Tumor-targeted nanoparticles hold great promise as new tools for therapy of liquid cancers. Furthermore, the therapeutic efficacy of nanoparticles can be improved by enhancing the cancer cellular internalization. METHODS: In this study, we developed a humanized bispecific antibody (BsAbs: CD20 Ab-mPEG scFv) which retains the clinical anti-CD20 whole antibody (Ofatumumab) and is fused with an anti-mPEG single chain antibody (scFv) that can target the systemic liquid tumor cells. This combination achieves the therapeutic function and simultaneously "grabs" Lipo-Dox® (PEGylated liposomal doxorubicin, PLD) to enhance the cellular internalization and anticancer activity of PLD. RESULTS: We successfully constructed the CD20 Ab-mPEG scFv and proved that CD20 Ab-mPEG scFv can target CD20-expressing Raji cells and simultaneously grab PEGylated liposomal DiD increasing the internalization ability up to 60% in 24 h. We further showed that the combination of CD20 Ab-mPEG scFv and PLD successfully led to a ninefold increase in tumor cytotoxicity (LC50: 0.38 nM) compared to the CD20 Ab-DNS scFv and PLD (lC50: 3.45 nM) in vitro. Importantly, a combination of CD20 Ab-mPEG scFv and PLD had greater anti-liquid tumor efficacy (P = 0.0005) in Raji-bearing mice than CD20 Ab-DNS scFv and PLD. CONCLUSION: Our results indicate that this "double-attack" strategy using CD20 Ab-mPEG scFv and PLD can retain the tumor targeting (first attack) and confer PLD tumor-selectivity (second attack) to enhance PLD internalization and improve therapeutic efficacy in liquid tumors.

Fluoroquinolones Suppress TGF-ß and PMA-Induced MMP-9 Production in Cancer Cells: Implications in Repurposing Quinolone Antibiotics for Cancer Treatment.

BACKGROUND: Fluoroquinolones (FQs) are potent antimicrobials with multiple effects on host cells and tissues. Although FQs can attenuate cancer invasion and metastasis, the underlying molecular mechanisms remain unclear. Matrix metalloproteinase-9 (MMP-9) has functional roles in tumor angiogenesis, invasion, and metastasis, and is associated with cancer progression and poor prognosis, suggesting that inhibitors of MMP-9 activity and transcription are prime candidates for cancer therapy. Despite numerous preclinical data supporting the use of MMP-9 inhibitors as anticancer drugs, the few available examples are not therapeutically useful due to low specificity and off-target effects. We examined the effects of FQs on MMP-9 production in cancer cells following transforming growth factor beta (TGF-ß) and phorbol 12-myristate 13-acetate (PMA) stimulation. EXPERIMENTAL APPROACHES: Using confluent cultures of HepG2 and A549 cells, the effects of FQs (ciprofloxacin, levofloxacin, clinafloxacin, gatifloxacin, and enrofloxacin) on TGF-ß and PMA-induced MMP-9 mRNA expression and production were studied in RNA extracts and culture supernatants, respectively. FQs specifically abrogated TGF-ß and PMA-induced MMP-9 levels and activity in a concentration and time-dependent manner, without affecting other MMPs or proteins involved in epithelial-mesenchymal transition. Additionally, FQs inhibited TGF-ß and PMA-induced cell migration via p38 and cyclic AMP signaling pathways. CONCLUSIONS AND IMPLICATIONS: Overall, we demonstrated that FQs inhibit cancer cell migration and invasion by downregulating MMP-9 expression and revealed the cellular mechanisms underlying their potential value in cancer treatment.

Dysbiosis of saliva microbiome in patients with oral lichen planus.

BACKGROUND: Oral microbiota is not only important for maintaining oral health but also plays a role in various oral diseases. However, studies regarding microbiome changes in oral lichen planus (OLP) are very limited. To the best of our knowledge, there has been only two studies investigating salivary microbiome changes in OLP. Therefore, the purpose of this study was to identify the characteristic microbial profile in the saliva of OLP patients, with or without erosive lesions, and compare that with recurrent aphthous ulcer (RAU), a common oral immunological disorder that also shows multiple erosive/ulcerative lesions. Whole saliva samples were collected from 20 patients with OLP (erosive E, n = 10 and non-erosive NE, n = 10), 10 patients with RAU (U) and 10 healthy controls (C). DNA was extracted from the saliva samples, and the 16S rDNA gene V4 hypervariable region was analyzed using Illumina sequencing. RESULTS: We obtained 4949 operational taxonomic units (OTUs) from the V4 region in all saliva samples. Community composition analysis showed a clear decreased relative abundance of genera Streptococcus and Sphingomonas in saliva from RAU patients when compared to the other three groups. Relative abundance of Lautropia and Gemella were higher in E group, whereas relative abundance of Haemophilus and Neisseria were higher in NE group when compared to C group. Abiotrophia and Oribacterium were higher in OLP (combining E and NE groups), while Eikenella and Aggregatibacter were lower when compared to C group. There was statistically significance in α-diversity between E and RAU groups(p < 0.05). Significant differences in ß-diversity were detected in bacteria between E and C; NE and C; as well as E and NE groups. The LDA effect size algorithm identified the g_Haemophilus might be the potential biomarker in NE group. CONCLUSIONS: We found that salivary microbiome in erosive OLP was significantly different from that found in RAU; and these changes may be related to the underlying disease process rather than presence of ulcerative/erosive lesions clinically. In addition, our findings in bacterial relative abundance in OLP were significantly different from the previously reported findings, which points to the need for further research in salivary microbiome of OLP.

Humanized bispecific antibody (mPEG × HER2) rapidly confers PEGylated nanoparticles tumor specificity for multimodality imaging in breast cancer.

BACKGROUND: Developing a universal strategy to improve the specificity and sensitivity of PEGylated nanoaparticles (PEG-NPs) for assisting in the diagnosis of tumors is important in multimodality imaging. Here, we developed the anti-methoxypolyethylene glycol (mPEG) bispecific antibody (BsAb; mPEG × HER2), which has dual specificity for mPEG and human epidermal growth factor receptor 2 (HER2), with a diverse array of PEG-NPs to confer nanoparticles with HER2 specificity and stronger intensity. RESULT: We used a one-step formulation to rapidly modify the nanoprobes with mPEG × HER2 and optimized the modified ratio of BsAbs on several PEG-NPs (Lipo-DiR, SPIO, Qdot and AuNP). The αHER2/PEG-NPs could specifically target MCF7/HER2 cells (HER2++) but not MCF7/neo1 cells (HER2+/-). The αHER2/Lipo-DiR and αHER2/SPIO could enhance the sensitivity of untargeted PEG-NPs on MCF7/HER2 (HER2++). In in vivo imaging, αHER2/Lipo-DiR and αHER2/SPIO increased the specific targeting and enhanced PEG-NPs accumulation at 175% and 187% on 24 h, respectively, in HER2-overexpressing tumors. CONCLUSION: mPEG × HER2, therefore, provided a simple one-step formulation to confer HER2-specific targeting and enhanced sensitivity and contrast intensity on HER2 positive tumors for multimodality imaging.

Comparison of smile esthetics among celebrities, dentists, and dental students in a Han Chinese population.

STATEMENT OF PROBLEM: Various components of smile esthetics have been evaluated. However, whether these components affect smile esthetics in Han Chinese celebrities, dentists, and dental students is unknown. PURPOSE: The purpose of this study was to evaluate the smile esthetics of celebrities, dentists, and dental students in a Han Chinese population. MATERIAL AND METHODS: Frontal images of smiles were obtained from the Internet for the celebrity group, while images of dentists and dental students were collected for the dentist and dental student groups. The buccal and posterior corridor ratios, the alignment discrepancy between the commissural and interpupillary lines, the number of teeth revealed, the width ratio relative to the golden proportion, and the width-to-length ratios of maxillary anterior teeth were calculated by using a photo-editing software program. Statistical analysis was performed by using 2-way ANOVA and the Tukey HSD test (α=.05). RESULTS: Eligible images were obtained for 81 celebrities, 83 dentists, and 78 dental students. The celebrities were found to have the highest buccal and posterior corridor ratios and reveal the least teeth in the smile among the 3 groups (all P<.001). The alignment discrepancy for celebrities was significantly less than that for dental students (P=.025). Moreover, the absolute difference of width ratios from the golden proportion was significantly different from 0 for all groups (all P<.001). CONCLUSIONS: Significant differences were found in the smiles of Han Chinese celebrities, dentists, and dental students in regard to the buccal and posterior corridor ratios, the alignment discrepancy between the commissural and interpupillary lines, and the number of teeth revealed. Chinese celebrities tended to have a smile that displays to the second premolar, with a medium buccal corridor width.

Comparison of the effects of rapid maxillary expansion versus Twin Block appliance on mandibular growth in skeletal Class II patients.

BACKGROUND: This is a retrospective study that compares mandibular growth changes in skeletal Class II patients treated by rapid maxillary expansion (RME) and following fixed appliance with those patients treated by Twin-Block (TB) and following fixed appliance. METHODS: Fourteen patients treated by RME and following fixed appliance were included into the RME group. Fifteen patients treated by Twin-Block and following fixed appliance were included into the TB group. Lateral cephalometric radiographs taken before treatment and immediately after fixed appliance treatment were used to evaluate mandibular growth effects. RESULTS: The starting forms of the patients in the two groups were examined to be of good comparability. The mandibular length increased significantly in both groups as measured by Co-Gn, Go-Gn and Ar-Gn, but the TB group didn't show more mandibular growth than the RME group (P > 0.05). Skeletal changes of the mandible in vertical dimension were different in the two groups. The change in FMA was 0.35° in the RME group, while the change was 2.65° in the TB group (P < 0.001). The change in LAFH was 5.14 mm in the RME group, significantly smaller than the change of 10.19 mm in the TB group (P < 0.001). CONCLUSION: The investigated Phase I treatment with RME followed by Phase II treatment of fixed appliance achieved the same increases in sagittal mandibular growth and facial profile improvements as the Twin-Block therapy. The treatment with RME followed by fixed appliance was better for vertical control, while the treatment with Twin-Block followed by fixed appliance significantly increased the mandibular plane angle.

Improving enzymatic hydrolysis efficiency of corncob residue through sodium sulfite pretreatment.

The effects of sodium sulfite pretreatment on the delignification rate, cellulose content, enzymatic hydrolysis efficiency, and glucose yield of corncob residues (CCR) were investigated. The optimum pretreatment conditions were as follows: 12% sodium sulfite, with a pH value of 7, a temperature of 160 °C, and a holding time of 20 min. Under the optimal conditions, the cellulose content in the pretreated residue was 85.17%, and sodium lignosulfonate with a sulfonation degree of 0.677 mmol/g was obtained in the waste liquids. A delignification rate of 77.45% was also achieved after the pretreatment. Enzymatic hydrolysis of pretreated CCR was carried out with cellulase (5 FPU/g substrate) and ß-glucosidase (10 IU/g substrate) for 48 h. The untreated CCR were hydrolyzed using cellulase (20 FPU/g substrate) and ß-glucosidase (10 IU/g substrate) for 48 h. The comparison results showed that sodium sulfite pretreatment improved the enzymatic hydrolysis efficiency and glucose yield, which increased by 28.80% and 20.10%, respectively. These results indicated that despite the application of low cellulase dosage, high enzymatic hydrolysis efficiency substrate could be produced, and the sodium lignosulfonate which can be used for oilfields and concrete additives was obtained from the sodium sulfite-pretreated CCR.

Malignant ureteral obstruction: experience and comparative analysis of metallic versus ordinary polymer ureteral stents.

BACKGROUND: To study the outcome and experience of using metallic stents in treating patients with malignant ureteral obstruction (MUO). METHODS: Seventy-six patients with MUO were assigned to the metallic stent group (MSG) or the ordinary polymer stent group (OPSG) according to the different materials. The success rate of the operation, duration of operation, patency rate serum creatinine values ,postoperative complications and QOL scores were compared between the two groups. RESULTS: In the OPSG and MSG, the success rates of the operation were 95.5% and 96.9%, respectively, and the durations of the operation were 20.6 ± 2.2 min and 50.9 ± 10.3 min (P < 0.01), respectively. There was no significant difference between the groups in serum creatinine values at 3 days after the operation (P > 0.05); however, the creatinine values at 3 days after the operation decreased significantly compared with those before the operation (P < 0.01). In the OPSG, there was no significant difference in creatinine values between 3 days and 6 months after operation, while the creatinine values 1 year after operation were increased significantly compared to those at 3 days after the operation (P < 0.05). In the MSG, there was no significant difference among creatinine values at different intervals (P > 0.05). The total rate of post-procedural complication was lower in the MSG than that in the OPSG(P < 0.05). There was no significant difference in the QOL score between the two groups before the operation (P > 0.05); however, the QOL scores at 6 months and 1 year after the operation were higher in the MSG than that in the OPSG(P < 0.05). In the MSG, there was no significant difference in the QOL score between preoperation and 6 months after surgery. Similarly, there was also no difference in the QOL score between 6 months after surgery and 1 year after surgery(P > 0.05). On the contrary, the differences of QOL score in the OPSG group were much significant between disparate time intervals (P < 0.05). CONCLUSIONS: For patients with MUO who require long-term retention of the stent, metallic stents with longer indwelling time are superior to ordinary polymeric stents.

Prevalence of dental caries and its association with body mass index among school-age children in Shenzhen, China.

BACKGROUND: Dental caries and overweight/obesity are health problems with shared risk factors, but the relationships between caries and BMI need to be further explored. The objective was to evaluate the current status of dental caries and the association between dental caries and Body Mass Index (BMI) among primary and secondary school students in Shenzhen, China, during the 2016-2017 academic year. METHODS: A population-based, cross-sectional study that enrolled a total of 1,196,004 students was conducted in Shenzhen. Physical and dental examinations were given to all primary and secondary school students by certified physicians and dentists following the national specification for student health examinations, and dental caries was diagnosed using WHO criteria. Descriptive analysis was applied to assess current oral health status and a multifactorial, logistic regression model was employed to evaluate the relationship between dental caries and obesity. RESULTS: A total of 1,196,004 students participated in the census. Mean age of the participants was 10.3 years, ranging from 6 to 20 years. The prevalence of dental caries was 41.15% in the present study, which was higher among girls (42.88%) than that in boys (39.77%) with a p-value of < 0.001. Students in public schools showed a significantly lower (p < 0.001) caries prevalence (37.36%) compared with those in private schools (47.96%). The caries restoration rate of students in Shenzhen was only 10.30%, which means only one out of ten students with caries received restorations. The mean dmft and DMFT scores were 0.97 and 0.33, respectively. More girls (10.96%) had their teeth filled than boys (9.78%). The restoration rate was higher (p < 0.001) in public schools (11.73%) than in private ones (8.35%). Children who were overweight or obese had a lower risk of experiencing caries compared to those who were within a normal weight (OR = 0.74/0.64). Caries was inversely associated with BMI among primary and secondary school students in Shenzhen. CONCLUSIONS: The prevalence of dental caries among primary and secondary school children was found to be related to sex, type of schools, region, and BMI. Further studies and more government support are required to confirm the findings of this study and to address current oral health problems.

Effect of surface removal following bleaching on the bond strength of enamel.

BACKGROUND: A reduction in bond strength of bleached enamel has been confirmed in the literature. Although limited information is available, it is conceivable that the veneer preparation process may remove the impacted enamel and further eliminate the compromised bond strength between the composite resin and bleached enamel. This study aimed to evaluate the effect of surface removal following bleaching on the micro-shear bond strength (µSBS) of bleached enamel. METHODS: Forty-eight specimens were prepared from bovine incisors and were randomly divided into 2 groups (n = 24): group B (bleaching with 40% hydrogen peroxide for 2 × 45 min with a 1-week interval) and group C (control group without bleaching treatment). Immediately after receiving the treatments, 0.5 mm of the enamel was removed from the specimen surface, followed by bonding of composite resin to the enamel surface. Each group was further divided into 2 subgroups of 12 specimens each: subgroup T (with 5000 thermocycles in water baths at 5 °C and 55 °C), and subgroup N (without thermocycling). The µSBS values were measured using a universal testing machine and subjected to two-way analysis of variance (α = 0.05). The fracture modes of the specimens were observed using a stereomicroscope. RESULTS: The µSBS values of the different groups ranged from 21.42 to 25.21 MPa. Following a surface reduction of 0.5 mm, bleaching treatment and thermocycling did not significantly affect the µSBS values (P = 0.348 and P = 0.507, respectively). No significant interaction was found between the bleaching treatment and thermocycling (P = 0.514). All the groups exhibited a high percentage of mixed failures. Compared with group C, group B exhibited higher percentage of adhesive failure. CONCLUSION: The results suggested that the bonding procedure could be performed on the bleached enamel following a surface reduction of 0.5 mm immediately after the bleaching treatment.