Genetic/Protein Association of Atopic Dermatitis and Tooth Agenesis.

Atopic dermatitis and abnormalities in tooth development (including hypomineralization, hypodontia and microdontia) have been observed to co-occur in some patients. A common pathogenesis pathway that involves genes and protein interactions has been hypothesized. This review aims to first provide a description of the key gene mutations and signaling pathways associated with atopic dermatitis and tooth agenesis (i.e., the absence of teeth due to developmental failure) and identify the possible association between the two diseases. Second, utilizing a list of genes most commonly associated with the two diseases, we conducted a protein-protein network interaction analysis using the STRING database and identified a novel association between the Wnt/ß-catenin signaling pathway (major pathway responsible for TA) and desmosomal proteins (component of skin barrier that affect the pathogenesis of AD). Further investigation into the mechanisms that may drive their co-occurrence and underlie the development of the two diseases is warranted.

Home and day-care microenvironment exposure to Blomia tropicalis allergens and their associations with salivary eosinophilic cationic protein (ECP) among preschool children in Singapore.

To date, exposure studies linking dust-mite allergens with asthma and allergic morbidities have typically relied on sampling from representative locations in the home for exposure assessment. We determine the effects of differing microenvironments allergen exposures on asthma and asthma severity among 25 case and 31 control preschool children in Singapore. Blo t 5 allergen levels in various niches from the children's home and day-care microenvironments as well as their Blo t 5 time-weighted concentrations were determined. Eosinophilic cationic protein (ECP) levels from the children's saliva as markers for airway inflammation were obtained. Salivary ECP levels were higher in children with asthma than those without and the strength of association increased with higher salivary ECP levels. Although there was no relationship between time-weighted Blo t 5 concentrations with salivary ECP levels among the controls, a positive statistically significant relationship was noted among cases, demonstrating the effects of cumulative exposure on asthma severity. Avoidance measures to reduce Blo t 5 allergen exposure should include all microenvironments that asthmatic children are exposed throughout the day.

The major allergen Der p 2 is a cholesterol binding protein.

Der p 2 is a major dust mite allergen and >80% of mite allergic individuals have specific IgE to this allergen. Although it is well characterized in terms of allergenicity, there is still some ambiguity in terms of its biological function. Three-dimensional structural analysis of Der p 2 and its close homologues indicate the presence of a hydrophobic cavity which can potentially bind to lipid molecules. In this study, we aimed to identify the potential ligand of Der p 2. Using a liposome pulldown assay, we show that recombinant Der p 2 binds to liposomes prepared with exogenous cholesterol in a dose dependent fashion. Next, an ELISA based assay using immobilized lipids was used to study binding specificities of other lipid molecules. Cholesterol was the preferred ligand of Der p 2 among 11 different lipids tested. Two homologues of Der p 2, Der f 2 and Der f 22 also bound to cholesterol. Further, using liquid chromatography-mass spectrometry (LC-MS), we confirmed that cholesterol is the natural ligand of Der p 2. Three amino acid residues of Der p 2, V104, V106 and V110 are possible cholesterol binding sites, as alanine mutations of these residues showed a significant decrease in binding (p < 0.05) compared to wild-type Der p 2. These results provide the first direct experimental evidence that Der p 2 binds to cholesterol.

Absolute quantification of gene expression in biomaterials research using real-time PCR.

One major measurement of tissue-engineered constructs efficacy and performance is determining expression levels of genes of interest at the molecular level. This measurement is commonly carried out with reverse transcription-polymerase chain reaction (RT-PCR). In this study, we described a novel method in achieving absolute quantification of gene expression using real-time PCR (aqPCR). This novel method did not require molecular cloning steps to prepare the standards for quantification comparison. Standards were linear double-stranded DNA molecules instead of the typical gene-in-plasmid format. aqPCR could also be used to give relative quantification comparisons between samples simply by dividing the copy numbers readings of the gene of interest with that of the normalization gene. RNA was extracted from monolayer and from polycaprolactone scaffold cultures and assayed for beta-actin and osteocalcin genes. We compared our aqPCR method with end-point PCR since end-point PCR is still a common means of measuring gene expression in the biomaterials field. This study showed that aqPCR was a better method to quantify gene expression than end-point PCR. With our described linear DNA standards method, we were able to obtain not only relative quantification of osteocalcin and beta-actin expression level but also actual copy numbers of osteocalcin and beta-actin for the monolayer culture and to be 1.34 x 10(4) and 1.45 x 10(7) copies, respectively and for the scaffold cultures to be 772 and 2.83 x 10(5) copies, respectively per starting total RNA mass of 10 ng. The standards curves made from these linear DNA standards showed good linearity (R(2)=0.9964 and 0.9902 for osteocalcin and beta-actin standards graphs), ranged from 10 to 10(9) copies and of comparable accuracy to current absolute quantification real-time PCR methods (which used plasmid standards obtained through molecular cloning methods). Our method might be a viable and more user-friendly alternative to current absolute quantification real-time PCR protocols.

Detection of two orchid viruses using quartz crystal microbalance (QCM) immunosensors.

Quartz crystal microbalance (QCM) immunosensors are based on the principle that adsorption of substances on the surface of a quartz crystal changes its resonance oscillation frequency. A QCM immunosensor was developed for the detection of both cymbidium mosaic potexvirus (CymMV) and odontoglossum ringspot tobamovirus (ORSV) by pre-coating the QCMs with virus-specific antibodies. Upon binding of virions in either purified form or crude sap of infected orchids with the immobilised virus antibodies, the increase in mass at the QCM surface resulted in a reduction in the frequency of resonance oscillation in a manner dependent upon the amount of virus bound. The QCM was able to detect as low as 1 ng each of the two orchid viruses. This detection sensitivity is comparable to enzyme linked immunosorbent assay (ELISA) but the assay is faster. This immunoassay was shown to be specific, sensitive, rapid and economical, thus providing a viable alternative to virus detection methods. This is the first report using QCM immunosensors to detect plant viruses.

Detection of two orchid viruses using quartz crystal microbalance-based DNA biosensors.

ABSTRACT We have developed a piezoelectric DNA-sensor based on DNA-RNA hybridization for the detection of two orchid viruses, Cymbidium mosaic virus (CymMV) and Odontoglossum ringspot virus (ORSV). Specific oligonucleotide probes modified with a mercaptohexyl group at the 5'-phosphate end were directly immobilized onto 10-MHz AT-cut quartz crystal microbalance (QCM). QCMs coated with such oligonucleotide probes were exposed to test solutions containing viral RNA for hybridization. Various experimental conditions evaluated were (i) DNA probe coating concentration, (ii) sensitivity and specificity of the probes at different hybridization temperatures, and (iii) effects of incubation temperature on the hybridization time. The specific nucleotide probe-coated QCM-based DNA sensors were able to detect both CymMV and ORSV in quantities as low as approximately 1 ng in purified RNA preparations and 10 ng in the crude sap of infected orchids. This is the first application of a DNA biosensor for the detection of plant viruses.

Characterization of osteogenically induced adipose tissue-derived precursor cells in 2-dimensional and 3-dimensional environments.

Earlier reports on a putative precursor cell population in adipose tissue showed differentiation along several mesodermal lineages, leading some to think that adipose tissue can be a source of cells applicable in regenerative medicine. However, characterizations of these adipose-derived precursor cells (ADPC) in the 3-dimensional (3-D) environment, especially within the area of bone-specific composite scaffolds, have been lacking. In this study, ADPC plated on culture flasks or seeded on medical grade polycaprolactone-tricalcium phosphate scaffolds (mPCL-CaP) were able to differentiate along the osteogenic lineages in both 2-D and 3-D environments as assessed with immunohistochemistry of osteo-related proteins, reverse transcriptase-polymerase chain reactions and alkaline phosphatase assay. The mPCL-CaP scaffolds provided adipose-derived cells (ADC) with a suitable environment as determined by DNA and metabolic assays, light, confocal and scanning electron microscopy. Flow cytometry revealed ADC to be CD29+, CD44+, CD73+, CD90+ and CD14-, CD31-, CD34-, CD45-, CD71-, and therefore showed the absence of hematopoietic stem cells but possibly the presence of pericytes and mescenchymal stem cells with osteogenic potential. The results of this study demonstrated the potential of using ADPC in combination with mPCL-CaP scaffolds for bone regenerative medicine.

Investigating the effects of preinduction on human adipose-derived precursor cells in an athymic rat model.

The osteogenic potential of human adipose-derived precursor cells seeded on medical-grade polycaprolactone-tricalcium phosphate scaffolds was investigated in this in vivo study. Three study groups were investigated: (1) induced--stimulated with osteogenic factors only after seeding into scaffold; (2) preinduced--induced for 2 weeks before seeding into scaffolds; and (3) uninduced--cells without any introduced induction. For all groups, scaffolds were implanted subcutaneously into the dorsum of athymic rats. The scaffold/cell constructs were harvested at the end of 6 or 12 weeks and analyzed for osteogenesis. Gross morphological examination using scanning electron microscopy indicated good integration of host tissue with scaffold/cell constructs and extensive tissue infiltration into the scaffold interior. Alizarin Red histology and immunostaining showed a heightened level of mineralization and an increase in osteonectin, osteopontin, and collagen type I protein expression in both the induced and preinduced groups compared with the uninduced groups. However, no significant differences were observed in these indicators when compared between the induced and preinduced groups.