RESUMEN
OBJECTIVES: This randomized clinical trial evaluated and compared the 2-year clinical performance of two ion-releasing bulk-fill composites (Cention N and Surefil One) with that of a conventional bulk-fill resin composite (Powerfil) in Class I and II cavities. METHODS: Thirty-two patients, each with 3 Class I and/or Class II cavities under occlusion, were enrolled in this trial. A total of 96 restorations were placed, 32 for each material, as follows: a self-adhesive composite; Surefil-one, alkasite; Cention N, and a bulk-fill resin composite; Powerfil. The restorations were placed by a single operator. Clinical evaluation was performed at baseline (1-week), 6-months, 1-year, and 2-years by two independent examiners using the FDI criteria. Intergroup and intragroup comparisons were analyzed using the Kruskal-Wallis and Friedman Tests. Multiple comparisons between groups were analyzed using the Mann-Whitney and Wilcoxon-rank tests. The level of significance was set at α = 0.05. RESULTS: Twenty-seven patients with a total of 81 restorations were evaluated at the end of the 2-years with 84.35% recall rates. Clinical success rates were 100%, 100%, and 96.3% for Powerfil, Surefil-one, and Cention N, respectively. Cention N showed a statistically significant (p < 0.05) decreased marginal integrity in comparison with resin composite at the 2-year evaluation. No recurrent decay was detected in any restoration. CONCLUSIONS: Both ion-releasing bulk-fill composites provided acceptable clinical performance similar to bulk-fill composite in Class I and II restorations over a 2-year period. CLINICAL RELEVANCE: The results of this trial suggests that there is a promising evidence supporting the use of ion-releasing composites.
Asunto(s)
Caries Dental , Restauración Dental Permanente , Humanos , Restauración Dental Permanente/métodos , Resinas CompuestasRESUMEN
BACKGROUND: This study aimed to assess the quality of various obturation techniques to fill perforation caused by internal root resorption using Micro-computed Tomography. METHODS: Cone-beam computed tomography images of a maxillary central incisor tooth with perforating internal resorptive defect were used to create a 3D printed model of the affected tooth. The replicas were divided into four groups based on the obturation technique used. The techniques included Group 1: a polydimethylsiloxane-based sealer (GuttaFlow-2) with gutta-percha. Group 2: same as Group 1 except for using a pre-mixed Bioceramic-based sealer (NeoSEALER Flo). Group 3: the defect was filled entirely using the NeoSealer Flo Bioceramic-based sealer. Group 4: the samples were obturated using the warm vertical compaction technique with a resin-based sealer (ADSeal). The resin models were then scanned a micro-computed scanner to evaluate the percentage of voids in each group. RESULTS: The results showed that NeoSEALER Flo groups had significantly the highest volume of voids while GuttaFlow-2 and warm vertical compaction groups had the lowest void volume. CONCLUSIONS: GuttaFlow-2 and warm vertical compaction techniques performed best in filling the internal resorptive defect.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Gutapercha , Materiales de Obturación del Conducto Radicular , Obturación del Conducto Radicular , Resorción Radicular , Microtomografía por Rayos X , Obturación del Conducto Radicular/métodos , Microtomografía por Rayos X/métodos , Resorción Radicular/diagnóstico por imagen , Materiales de Obturación del Conducto Radicular/uso terapéutico , Humanos , Gutapercha/uso terapéutico , Tomografía Computarizada de Haz Cónico/métodos , Dimetilpolisiloxanos , Incisivo/diagnóstico por imagen , Combinación de Medicamentos , Impresión TridimensionalRESUMEN
OBJECTIVE: To investigate the characteristics of particle generation and dispersion during dental procedure using digital inline holography (DIH) METHODS: Particles at two locations, near-field and far-field, which represent the field closer to the procedure location and within 0.5 m from the procedure location respectively, are studied using two different DIH systems. The effect of three parameters namely rotational speed, coolant flow rate, and bur angle on particle generation and dispersion are evaluated by using 10 different operating conditions. The particle characteristics at different operating conditions are estimated from the holograms using machine learning-based analysis. RESULTS: The particle concentration decreased by at least two orders of magnitude between the near-field and far-field locations across the 10 different operating conditions, indicating significant dispersion of the particles. High rotational speed is found to produce a larger number of smaller particles, while lower rotational speeds generate larger particles. Coolant flow rate is found to have a greater impact on particle transport to the far-field location. Irregular shape dental particles account for 29% of total particles at far-field location, with the majority of these irregular shape particles having diameters ranging from 12 to 18 µm. CONCLUSIONS: All three parameters have significant effects on particle generation and dispersion, with rotational speed having a more significant influence on particle generation at near-field and coolant flow rate playing a more important role on particle transport to the far-field. CLINICAL RELEVANCE: This study provides valuable insights on particle characteristics during high-speed drilling. It can help dental professionals minimize exposure risks for themselves and patients by optimizing clinical operating conditions.
RESUMEN
STATEMENT OF PROBLEM: The mechanical behavior of the conical connection implant with different torque levels requires evaluation. PURPOSE: The purpose of this finite element analysis study was to investigate the impact of abutment screw torque on the formation of microgaps at the implant-to-abutment interface of a conical connection under oblique loading. This is important because it is thought that bacteria can invade the internal implant space through the abutment-implant microgaps, causing peri-implantitis. MATERIAL AND METHODS: Three-dimensional finite element analyses of the conical implant-abutment connection were performed by using screw torques of 20 Ncm and 30 Ncm. Oblique loads from 10 N to 280 N were applied to the prosthesis placed on the implant. The maximum von Mises stress in the abutment screw, the microgap formation process, and the critical load for bridging the internal implant space were evaluated. RESULTS: The stresses in the abutment screw under oblique loading had limited sensitivity to the screw torque. However, the residual stress in the screw with a 30-Ncm torque was 35% higher than that with a 20-Ncm torque in the absence of an external load. The area in contact at the implant-to-abutment interface decreased with increasing load for both torque values. The critical load for bridging the internal implant space was 160 N for a screw torque of 20 Ncm and 220 N for a screw torque of 30 Ncm. The maximum gap size was approximately 470 µm with all the loads. CONCLUSIONS: Increasing the screw torque can reduce the formation of microgaps at the implant-to-abutment interface. However, this will result in higher mean stress in the abutment screw, which may reduce its fatigue life and consequently that of the prosthesis. Further research is needed to evaluate the relationship between the abutment screw torque and microleakage in implant-supported restorations.
Asunto(s)
Pilares Dentales , Implantes Dentales , Tornillos Óseos , Diseño de Implante Dental-Pilar , Análisis del Estrés Dental/métodos , Análisis de Elementos Finitos , Estrés Mecánico , TorqueRESUMEN
Dentine erosion is an increasingly recognised problem, especially in aging population, and various methods have been utilised for its assessment. This narrative review was planned to summarise the methods for the assessment of the early stages of dentine erosion. Relevant original articles published in the English language from 2013 to 2017 were reviewed. Laboratory techniques and methods with in vivo potential were separately studied. It is evident that the assessment of early dentine erosion is complex and requires a combination of methods. For clinical evaluation, chemical analysis and optical methods show great potential but are in need of more validation.
Asunto(s)
Dentina/diagnóstico por imagen , Erosión de los Dientes/diagnóstico , Calcio/análisis , Dentina/química , Dentina/patología , Pruebas de Dureza , Humanos , Microrradiografía , Microscopía de Fuerza Atómica , Fosfatos/análisis , Fluorescencia Cuantitativa Inducida por la Luz , Tomografía de Coherencia Óptica , Erosión de los Dientes/diagnóstico por imagen , Erosión de los Dientes/patologíaRESUMEN
We conducted the first pilot study to investigate the use of the attenuation coefficient from an optical coherence tomography (OCT) backscattered signal as a measure of surface roughness changes in eroded dentine at an early stage of the erosion process. Ten human premolar root samples were subjected to citric acid treatment before scanning by OCT. The extracted relative attenuation coefficient (µR) from backscattered OCT signals was shown to increase with the duration of acid challenge. Validated against roughness measurements (rSa) from scanning electron microscopy scans, µR is significantly correlated with rSa indicative of severity of erosion (p<0.01, r=0.9195). We conclude that the OCT attenuation coefficient of the immediate subsurface in eroded dentine is a potential surrogate measure for its surface roughness. However, further work should be performed to study how it relates to the surface and immediate subsurface changes effected by other mechanical wear before it could unequivocally be used as a surrogate measurement for surface roughness.
Asunto(s)
Dentina/química , Tomografía de Coherencia Óptica/métodos , Erosión de los Dientes/diagnóstico , Diente Premolar/química , Diente Premolar/ultraestructura , Dentina/ultraestructura , Humanos , Reproducibilidad de los Resultados , Propiedades de SuperficieRESUMEN
BACKGROUND: The objective of this study was to determine the prevalence and severity of general tooth wear (GTW), i.e. tooth wear irrespective of etiology and erosive tooth wear (ETW), i.e. tooth wear predominantly due to erosion; and also to investigate the relationship between ETW and dental caries experience in 16-year-old adolescents in Kuantan, Malaysia. METHODS: A multi-staged cluster sampling method was employed. A total of 598 16-year-old adolescents participated in this study. Participants' demographic profile was assessed through a self-administered questionnaire. Clinical examinations were carried out under standardized conditions by a single examiner. The level of GTW was recorded using the modified Smith and Knight's Tooth Wear Index (TWI) whilst ETW were recorded using the Basic Erosive Wear Examination (BEWE) index. This index was developed to record clinical findings and assist in the decision-making process for the management of erosive tooth wear. Dental caries was recorded using the D3MFT index whereby D3 denotes obvious dental decay into dentine detected visually. RESULTS: The prevalence of GTW, ETW and dental caries, i.e. percentage of individuals found to have at least one lesion, was 99.8%, 45.0% and 27.8% respectively. Two thirds of affected teeth with GTW were observed to have a TWI score of 1 whereas almost all of the affected teeth with ETW had a BEWE score of 2. The mean D3MFT was 0.62 (95% CI 0.50, 0.73) with Decayed (D) teeth being the largest component, mean D3T was 0.36 (95% CI 0.30, 0.43). There was no significant association between socio-demographic factors and prevalence of ETW. Logistic regression analysis also showed no significant relationship between the prevalence of ETW and D3MFT (p > 0.05). CONCLUSIONS: Almost all adolescents examined had GTW but they were mainly early lesions. However, nearly half were found to have ETW of moderate severity (BEWE score 2). No significant relationship between the occurrence of erosive tooth wear and caries was observed in this population.
Asunto(s)
Caries Dental/epidemiología , Erosión de los Dientes/epidemiología , Desgaste de los Dientes/epidemiología , Adolescente , Caries Dental/etiología , Femenino , Humanos , Malasia/epidemiología , Masculino , Prevalencia , Muestreo , Factores Socioeconómicos , Erosión de los Dientes/complicaciones , Desgaste de los Dientes/complicacionesRESUMEN
Dental enamel, an avascular, irreparable, outermost and protective layer of the human clinical crown has a potential to withstand the physico-chemical effects and forces. These properties are being regulated by a unique association among elements occurring in the crystallites setup of human dental enamel. Calcium and phosphate are the major components (hydroxyapatite) in addition to some trace elements which have a profound effect on enamel. The current review was planned to determine the aptitude of various trace elements to substitute and their influence on human dental enamel in terms of physical and chemical properties.
Asunto(s)
Esmalte Dental , Esmalte Dental/química , Esmalte Dental/efectos de los fármacos , Esmalte Dental/fisiología , Durapatita/análisis , Durapatita/química , Humanos , Metales Pesados/análisis , Metales Pesados/química , Saliva/química , Oligoelementos/análisis , Oligoelementos/químicaRESUMEN
Bacteria realize the ability to communicate by production of quorum sensing (QS) molecules called autoinducers, which regulate the physiological activities in their ecological niches. The oral cavity could be a potential area for the presence of QS bacteria. In this study, we report the isolation of a QS bacterial isolate C10B from dentine caries. Preliminary screening using Chromobacterium violaceum CV026 biosensor showed that isolate C10B was able to produce N-acylhomoserine lactones (AHLs). This bacterium was further identified as a member of Burkholderia, an opportunistic pathogen. The isolated Burkholderia sp. was confirmed to produce N-hexanoyl-L-homoserine lactone (C6-HSL), N-octanoyl-L-homoserine lactone (C8-HSL), N-decanoyl-L-homoserine lactone (C10-HSL) and N-dodecanoyl-L-homoserine lactone (C12-HSL).
Asunto(s)
Acil-Butirolactonas/metabolismo , Burkholderia/aislamiento & purificación , Burkholderia/metabolismo , Caries Dental/microbiología , 4-Butirolactona/análogos & derivados , 4-Butirolactona/metabolismo , Acil-Butirolactonas/análisis , Técnicas Biosensibles , Burkholderia/patogenicidad , Cromatografía Liquida , Chromobacterium , Homoserina/análogos & derivados , Homoserina/metabolismo , Humanos , Lactonas/metabolismo , Espectrometría de Masas en TándemRESUMEN
Bone regeneration remains a major clinical challenge, especially when infection necessitates prolonged antibiotic treatment. This study presents a membrane composed of self-assembled and interpenetrating GL13K, an antimicrobial peptide (AMP) derived from a salivary protein, in a collagen membrane for antimicrobial activity and enhanced bone regeneration. Commercially available collagen membranes were immersed in GL13K solution, and self-assembly was initiated by raising the solution pH to synthesize the multifunctional membrane called COL-GL. COL-GL was composed of interpenetrating large collagen fibers and short GL13K nanofibrils, which increased hydrophobicity, reduced biodegradation from collagenase, and stiffened the matrix compared to control collagen membranes. Incorporation of GL13K led to antimicrobial and anti-fouling activity against early oral surface colonizer Streptococcus gordonii while not affecting fibroblast cytocompatibility or pre-osteoblast osteogenic differentiation. GL13K in solution also reduced macrophage inflammatory cytokine expression and increased pro-healing cytokine expression. Bone formation in a rat calvarial model was accelerated at eight weeks with COL-GL compared to the gold-standard collagen membrane based on microcomputed tomography and histology. Interpenetration of GL13K within collagen sidesteps challenges with antimicrobial coatings on bone regeneration scaffolds while increasing bone regeneration. This strength makes COL-GL a promising approach to reduce post-surgical infections and aid bone regeneration in dental and orthopedic applications. STATEMENT OF SIGNIFICANCE: The COL-GL membrane, incorporating the antimicrobial peptide GL13K within a collagen membrane, signifies a noteworthy breakthrough in bone regeneration strategies for dental and orthopedic applications. By integrating self-assembled GL13K nanofibers into the membrane, this study successfully addresses the challenges associated with antimicrobial coatings, exhibiting improved antimicrobial and anti-fouling activity while preserving compatibility with fibroblasts and pre-osteoblasts. The accelerated bone formation observed in a rat calvarial model emphasizes the potential of this innovative approach to minimize post-surgical infections and enhance bone regeneration outcomes. As a promising alternative for future therapeutic interventions, this material tackles the clinical challenges of extended antibiotic treatments and antibiotic resistance in bone regeneration scenarios.
Asunto(s)
Péptidos Antimicrobianos , Regeneración Ósea , Colágeno , Membranas Artificiales , Nanofibras , Regeneración Ósea/efectos de los fármacos , Animales , Ratas , Nanofibras/química , Colágeno/química , Péptidos Antimicrobianos/química , Péptidos Antimicrobianos/farmacología , Osteogénesis/efectos de los fármacos , Ratones , Osteoblastos/efectos de los fármacos , Streptococcus gordonii/efectos de los fármacos , Masculino , Ratas Sprague-Dawley , Fibroblastos/efectos de los fármacosRESUMEN
(1) Background: OCT imaging has been used to assess enamel demineralization in dental research, but it is not yet developed enough to qualify as a diagnostic technique in clinics. The current capabilities of most commercial acquisition software allow for visual and qualitative assessments. There is a need for a fast and verified batch-processing algorithm to segment and analyze demineralized enamel. This study suggests a GUI MATLAB algorithm for the processing and quantitative analysis of demineralized enamel. (2) Methods: A group of artificially demineralized human enamels was in vitro scanned under the OCT, and ROI frames were extracted. By using a selected intensity threshold colormap, Inter- (Ie) and Intra- (Ia) prismatic demineralization can be segmented. A set of quantitative measurements for the average demineralized depth, average line profile, and integrated reflectivity can be obtained for an accurate assessment. Real and simulated OCT frames were used for algorithm verification. (3) Results: A strong correlation between the automated and known Excel measurements for the average demineralization depth was found (R2 > 0.97). (4) Conclusions: OCT image segmentation and quantification of the enamel demineralization zones are possible. The algorithm can assess the future development of a real-time assessment of dental diagnostics using an oral probe OCT.
RESUMEN
PURPOSE: This study aimed to evaluate the stress distribution and microgap formation in implant assemblies with conical abutments made of different materials under an oblique load. MATERIALS AND METHODS: The mechanical behavior of an implant assembly with a titanium abutment was analyzed and compared with that of an assembly with a Y-TZP abutment using finite element analysis (FEA). A torque of 20 Ncm was first applied to the abutment screw, followed by oblique loads of 10 N-280 N applied to the prosthesis placed on the implant. The maximum stress in the abutment screw, the microgap formation process, and the critical load for bridging the internal implant space were evaluated. RESULTS: No significant difference in stress distribution between the two cases was observed, with the stresses being mainly concentrated at the top half of the screw (the predicted maximum von Mises stress was approximately 1200 MPa at 280 N). The area in contact at the implant-to-abutment interface decreased with increasing load for both abutments, with the critical load for bridging the internal implant space being roughly 140 N. The maximum gap size being was approximately 470 µm with either abutment. CONCLUSION: There was no significant difference in the stress distribution or microgap formed between implant assemblies with titanium and Y-TZP abutments having an internal conical connection.
Asunto(s)
Implantes Dentales , Análisis de Elementos Finitos , Titanio , Torque , Análisis del Estrés Dental , Estrés MecánicoRESUMEN
The objective of this study was firstly to assess the demineralization inhibitory effect of ion-releasing restorations in enamel adjacent to restoration using a biofilm caries model and secondly to compare the effect to that in a chemical caries model. Fifty-six bovine incisors were filled with either Surefil one (SuO), Cention N (CN) (both ion-releasing materials), Ketac-Molar (GIC) or Powerfill resin composite (RC). The restored teeth were then randomly divided into 2 groups according to the used caries model (biofilm or chemical caries model). The micro-computed tomography (MicroCt) and optical coherence tomography (OCT) outcome measures used to evaluate demineralization inhibition effects were lesion depth, LD and increase in OCT integrated reflectivity, ΔIR, at five different depths. It was observed that all outcome measures of CN were statistically the same as those of GIC and conversely with those of RC. This was also the case for SuO except for LD, which was statistically the same as RC. When comparing the two caries models, LD of the biofilm model was statistically deeper (p < 0.05) than the chemical model for all four materials. In conclusion, CN and SuO have similar demineralization inhibitory effects as GIC, and the biofilm caries model is more discriminatory in differentiating demineralization inhibitory effects of ion-releasing restorative material.
RESUMEN
This systematic review was aimed to evaluate occurrence of secondary caries and marginal adaptation in ion-releasing materials versus resin composite. Electronic search of PubMed, Scopus, and Open Grey databases with no date or language restrictions until May 21st, 2021, was conducted. Randomized clinical trials that compared ion-releasing restorations versus resin composite were included. For quantitative analysis, a random-effects meta-analysis with risk difference as an effect measure and a 95% confidence interval was used. Quality of evidence was assessed using The Grading of Recommendations, Assessment, Development, and Evaluation criteria. The risk of bias was evaluated using the Cochran Collaboration Risk of Bias tool. The inclusion criteria were met by 22 studies, and 10 studies were included in the meta-analysis. Three follow-up periods (1 year, 18 months-2 years, and 3 years) were evaluated. The overall quality of evidence for secondary caries and marginal adaptation outcomes was low. The results of the meta-analysis showed no significant difference (p > 0.05) in both outcomes between ion-releasing materials and resin composite. The occurrence of secondary caries was not dependent on the nature of the restorative material. It is more likely a complex process that involves the same risk factors as primary carious lesions.
Asunto(s)
Resinas Compuestas , Caries Dental , Humanos , Ensayos Clínicos Controlados Aleatorios como Asunto , Resinas Compuestas/uso terapéutico , Atención Odontológica , Sesgo , Caries Dental/epidemiología , Caries Dental/etiología , Restauración Dental PermanenteRESUMEN
INTRODUCTION: Vertical root fracture (VRF) in root canal-treated (RCT) teeth is a common cause of pain, bone resorption, and tooth loss. VRF is also difficult to diagnose and measure. Magnetic resonance imaging (MRI) has the potential to identify VRF due to beneficial partial volume averaging, without using ionizing radiation. This investigation aimed to describe the narrowest VRFs detectable based on MRI, using micro-computed tomography (microCT) as the reference standard and proposes a method using profile integrals to measure the widths of small VRFs. METHODS: VRFs were induced in 62 RCT tooth root samples. All samples were imaged in a phantom using MRI and reference imaging was obtained using microCT. The stacks of 3-dimensional axial MRIs were assessed by 3 board-certified endodontists. Evaluators determined the most coronal slice within the stack that was discernible as the extent of the VRF. This slice was measured on correlated microCT sections to determine the minimum VRF width (µm) detectable using a profile integral-based method to measure small fractures and negate the effects of the point spread function. RESULTS: Using profile integrals to measure VRF width was repeatable and resulted in estimates that were on average 1 µm smaller than known reference widths. Adjusted median VRF width detected using MRI was 45 µm (first quartile: 26 µm, third quartile: 64 µm). CONCLUSION: Using profile integrals is a valid way to estimate small VRF width. The MRI approach demonstrated ability to repeatedly detect VRFs as small as 26 µm.
Asunto(s)
Fracturas de los Dientes , Diente no Vital , Humanos , Tomografía Computarizada de Haz Cónico , Fracturas de los Dientes/diagnóstico por imagen , Fracturas de los Dientes/patología , Raíz del Diente/diagnóstico por imagen , Raíz del Diente/patología , Imagen por Resonancia Magnética , Tratamiento del Conducto Radicular , Diente no Vital/diagnóstico por imagenRESUMEN
Currently, resin composites are the most popular materials for dental restoration in clinical practice. Although the properties of such materials have been improved significantly, together with better clinical techniques used for their placement, early restoration failure still occurs too frequently. As clinical studies take years to complete, and new resin composites are being produced at ever increasing pace, laboratory assessment using accelerated but representative tests is necessary. The main types of failure in resin-composite restoration are tooth/restoration fracture and secondary caries, which are caused by a combination of mechanical and biochemical challenges. In this study, a biofilm model (S. mutans) and a chemical model (lactic-acid buffer) for producing artificial caries in bovine dentin are developed and calibrated against in situ data. Using a power law relationship between the demineralization depth and challenge duration, scale factors that convert the in vitro durations to the equivalent clinical durations are determined for different pH values for each model. The scale factors will allow the synchronization of biochemical and mechanical challenges in terms of their rates of action to potentially test resin-composite restoration in an accelerated but clinically representative manner. STATEMENT OF SIGNIFICANCE: Although the properties of resin composites for dental restoration have been improved significantly, early restoration failure still occurs too frequently. As clinical studies take years to complete, accelerated laboratory testing is necessary. Resin-composite restoration fail mainly through fracture and secondary caries, caused by a combination of mechanical and biochemical challenges. In this study, a biofilm and a chemical model for producing artificial caries in bovine dentin are calibrated against in situ data. Using a power law relationship between demineralization depth and challenge duration, scale factors are determined for different pH for each model. The scale factors will allow the synchronization of biochemical and mechanical challenges in testing resin-composite restoration in an accelerated but clinically representative manner.
Asunto(s)
Resinas Compuestas/química , Resinas Compuestas/metabolismo , Restauración Dental Permanente/estadística & datos numéricos , Animales , Biopelículas , Calibración , Bovinos , Concentración de Iones de Hidrógeno , Ácido Láctico/química , Ensayo de Materiales/métodos , Modelos Biológicos , Modelos Químicos , Streptococcus mutans/metabolismo , Streptococcus mutans/fisiología , Desmineralización Dental/inducido químicamenteRESUMEN
PURPOSE: To investigate the effects of different curing modes, including tack cure, on the degree of conversion (DC) and mechanical parameters of dual-cured luting agents for all-ceramic restorations. METHODS: Immediate light curing, intermittent light curing (2-s tack cure and a 1-min interval before the main cure), delayed light cuing (2-min delay) and chemical or no light curing were used to cure two dual-cured luting agents, RelyX Unicem and PermaCem 2.0, through a 1.5-mm thick lithium disilicate ceramic slide. DC (n=3), micro-hardness (n=5), shrinkage strain (n=4) and shrinkage stress (n=3) were measured under the aforementioned curing modes. The data were analyzed using two-way ANOVA and post-hoc Tukey HSD test, with the level of significance set at α=0.05. RESULTS: For both luting agents, all the light-curing modes produced similar final DC, but using chemical cure only could significantly reduce the DC. The mechanical parameters followed a similar pattern. There were positive but nonlinear correlations between DC and the other mechanical parameters, with the increase in these parameters with DC being slower initially. CONCLUSIONS: Provided adequate light curing is applied to a dual-cured luting agent, delaying the light curing or using a tack cure first to facilitate seating of a restoration may not have a significant impact on the luting agent's final degree of conversion. However, using chemical cure only may result in inadequate cure of the luting agent and is recommended only for highly opaque restorations.
Asunto(s)
Cementos Dentales , Cementos de Resina , Cerámica , Dureza , Ensayo de MaterialesRESUMEN
OBJECTIVE: The aim of this research was to determine the association between sorptivity of water and the state of mineralization in carious enamel of different stages of severity. METHODS: As a preliminary work, water droplets of 1.5 µL were placed on the surfaces of hydroxyapatite (HA) discs of different densities. The water droplet profile was dynamically recorded every second over a period of 10 s using a contact angle meter to determine the relationship between sorptivity and density. To measure and calculate sorptivity on enamel surfaces, varnish was painted on the labial surface of 96 extracted caries-free human teeth, leaving two 1.4 ± 0.1 mm diameter circular exposed test sites. The specimens were randomly divided into 6 groups (n = 16) and subjected to 0(G0), 7(G7), 14(G14), 21(G21), 28(G28) and 35(G35) days of pH cycling, respectively. A 0.7 µL water droplet was placed on each exposed site and Optical Coherence Tomography was used to measure its height every 10 seconds for 2 min. Sorptivity was computed by considering sorption equations and Washburn's analysis of capillary kinetics and correction for evaporation was also performed. Micro-Computed Tomography scans of the specimens were obtained and delta Z (ΔZ) is the parameter used to measure mineral loss. ΔZ at 10 µm (ΔZ10) and 50 µm (ΔZ50) from the surface were calculated. One-way ANOVA and Post-hoc Tukey tests were used to compare sorptivity between groups and bivariate correlations were used to analyze the association between sorptivity and ΔZ. RESULTS: Sorptivity was found to be inversely and linearly correlated with HA density with R2 value of 0.95. With enamel, there is a general trend of increase in mean sorptivity from G0 to G35, except for a decrease in G21. The same trends were observed for both ΔZ10 and ΔZ50. The decrease in sorptivity in G21 coincided with the presence of a surface hypermineralized layer in G21 samples. Post-hoc Tukey showed significant differences in mean sorptivity between G0 and G14, G0 and G21 as well as G14 and G21. Post-hoc Dunnett's T3 showed significant differences for ΔZ10 between G0 and G14 as well as G14 and G21. Significant correlation between mean sorptivity and ΔZ10 was detected with Pearson correlation coefficient of 0.461. For ΔZ50, post-hoc Tukey showed significant differences between G0 and G14 but no significant difference was detected between G14 and G21. No correlations were detected between mean sorptivity and ΔZ50. SIGNIFICANCE: Sorptivity was found to be inversely and linearly correlated with HA density with R2 value of 0.95. With enamel, there is a general trend of increase in mean sorptivity from G0 to G35, except for a decrease in G21. The same trends were observed for both ΔZ10 and ΔZ50. The decrease in sorptivity in G21 coincided with the presence of a surface hypermineralized layer in G21 samples.
Asunto(s)
Caries Dental , Desmineralización Dental , Susceptibilidad a Caries Dentarias , Esmalte Dental , Humanos , Agua , Microtomografía por Rayos XRESUMEN
In some cases of proclined maxillary incisors, the proclination can be corrected by a fixed prosthesis. The aim of this study was to investigate the magnitude and distribution of (i) principal stresses in the adjacent alveolar bone and (ii) direct and shear stresses that are normal and parallel, respectively, to the bone-tooth interface of a normal angulated maxillary incisor, a proclined one, and a proclined one corrected with an angled prosthetic crown. 2D finite-element models were constructed, and a static load of 200 N on the palatal surface of the maxillary incisor at different load angles was applied. Load angles (complementary angle to interincisal angle) ranging from 20° to 90° were applied. The results indicate that the load angle could have a more significant impact on the overall stress distributions in the surrounding alveolar bone and along the bone-tooth interface than the proclination of the maxillary incisor. Provided that the resulting interincisal angle is 150° or smaller, the stresses in the surrounding bone and at the bone-tooth interface are similar between a proclined maxillary incisor and the one with prosthodontic correction. Hence, such a correction, when deemed appropriate clinically, can be undertaken with confidence that there is little risk of incurring additional stresses over that already in existence, in the supporting bone and at the tooth-bone interface.
Asunto(s)
Diseño de Prótesis Dental , Prótesis Dental/instrumentación , Incisivo/anatomía & histología , Maxilar/anatomía & histología , Algoritmos , Fenómenos Biomecánicos , Cefalometría , Simulación por Computador , Elasticidad , Análisis de Elementos Finitos , Humanos , Incisivo/cirugía , Modelos Lineales , Ensayo de Materiales , Maxilar/cirugía , Presión , Programas Informáticos , Estrés Mecánico , Resistencia a la TracciónRESUMEN
OBJECTIVE: The aim of the study was to determine demineralisation inhibition and remineralisation potential of poly-γ-glutamic acid with its possible mechanism of action on human dental enamel. METHODOLOGY: Three sodium-fluoride(NaF) concentration(0.01%w/v,0.1%w/v and 0.5%w/v respectively)and two poly-γ-glutamic acid(PGGA)concentration(1%w/v and 2%w/v respectively)were prepared in 0.1â¯M acetic acid(pH4.0)and deionized distilled water.For de/re-mineralisation study, tooth samples (18 teeth varnished, leaving a 2 mm2 window on the mid-buccal surfaces) were immersed in respective acidified NaF and PGGA solutions. The Ca2+ release/uptake was monitored with ISE over 72-hr with increasing pH every 24-h from 4.0 to 6.0.These teeth were later subjected to cross-sectional microhardness to determine integrated mineral recovery of enamel on increasing pH of respective acidified solution.In order to determine mechanism of PGGA,two concentrations of PGGA in deionized-water-solutions were used for tooth samples immersion followed by overnight drying then later subjected to Fourier Transform Infra-Red(FT-IR) analysis.The FT-IR analysis was also carried out on PGGA powder.For control,the experiment was repeated using hydroxyapatite(HAp)pellets.The density of PGGA solutions(1%and2%)was also measured to determine their dynamic viscosities. RESULTS: The ISE and microhardness testing revealed statistically significant (ρâ¯≤â¯0.05) dissolution inhibition and remineralisation potential for tooth sample treated with acidified 2%PGGA. From the FT-IR spectra, it was observed that the profiles of the enamel and HAp surfaces treated with 1%-and 2%-PGGA solutions were similar to those of PGGA powder.It was found that the viscosity of PGGA increases with increasing concentration. CONCLUSION: The study implies that 2% PGGA is more effective than NaF as forms a coating layer to protect from demineralisation and promote remineralisation of the tooth surface.