Mandibular torus thickness associated with age: Postmortem computed tomographic analysis.

Age estimation is an essential step in identifying human corpses. Several mandibular landmarks have been highlighted as skeletal sites for age estimation since aging causes morphological changes. Reports suggest that mandibular torus size may be associated with aging; however, thorough investigation has not been performed owing to the difficulty in measuring it. Therefore, this study aimed to determine the association between age and mandibular torus thickness using postmortem computed tomography data from Japanese corpses. This study included 2,792 corpses with mean (standard deviation) age of 58.0 (22.4) years (range, 0-101 years) and 67.6 % males. Further, 2,662 (95.3 %), 14 (0.5 %), 59 (2.1 %), and 57 (2.0 %) corpses were in the permanent, mixed, primary, and predental dentition periods, respectively. Multivariable analysis was performed to quantify the impact of age on mandibular torus thickness, adjusting for sex, height, weight, and occlusal contact status. The model also included an interaction term between age and occlusal status because of the potential effect modification by occlusion. Results of the multivariable regression analysis showed that mandibular torus thickness increased with age (the regression coefficients (95 % confidence interval) were 0.6 (0.2-1.0), 0.7 (0.3-1.0), 1.0 (0.6-1.4), 1.3 (0.9-1.7), 1.3 (0.8-1.8), and 1.1 (0.4-1.7) for age groups 30-39, 40-49, 50-59, 60-69, 70-79, and 80-89 years, respectively), especially in males with occlusal contact. A significant association between mandibular torus thickness and age, modified by occlusal status and sex, was identified. Therefore, data regarding the thickness of the mandibular torus and occlusal status may be useful for age estimation in human corpses.

Age estimation by palatal suture using modified Kamijo's method.

The present study aimed to investigate the correlation between palatal suture obliteration and age in modern Japanese and to develop an age estimation equation by modifying Kamijo's (1949) method. The subjects were 195 Japanese skeletal remains (155 males and 40 females) whose age and sex were known. First, obliteration score (OS) was obtained by measuring palatal suture obliteration from photographic images taken at the time of forensic autopsy, and the correlation with age was examined; no significant correlation was found in females. Second, the palatal sutures were divided into 14 sections, and each section was scored from 0 to 4 points according to the degree of the suture obliteration. Suture scores (SS) were then calculated for each of the four sutures, and the sum of the 14 scores (TSS: total suture score) was used to perform regression analysis for age. For male and all subjects (male and female), age significantly increased (p < 0.001) according to increment of SSs for all sutures. TSS has the highest regression coefficient (r = 0.540), and the lowest standard error of estimation (13.54 years) for all of the patients. The intra- and inter-observer agreement scoring showed high reliability. Validation study using the formulae showed a high percentage of correct responses (80 %). In conclusion, age estimation regression formula by palatal suture using modified Kamijo's method was established for Japanese population, and the study showed the formula might be valid for age estimation.

Usefulness of powdered crown of mandibular first premolars in birth year estimation by radiocarbon dating.

BACKGROUND: Radiocarbon (14C), whose levels increased in the atmosphere between 1955 and 1963, accumulates in the enamel of human teeth only during the process of tooth formation and has been applied to estimate the birth year of unidentified corpses. However, enamel isolation from teeth is time-consuming and labor-intensive. Therefore, this study aimed to estimate the birth year using 14C in the crown of a single mandibular first premolar tooth. MATERIALS AND METHODS: Fourteen mandibular first premolars collected from forensic autopsies were analyzed. For nine teeth, each tooth was cut longitudinally: half of the tooth was enamel, and the other half was crown (1). For the other five teeth, the entire crown was used (2). Thereafter, the 14C concentration in each tooth was measured using accelerator mass spectrometry. RESULTS: The absolute error between the actual date of birth (DOB) and the estimated DOB was within the range of 1.0-8.8 years in the enamel of five teeth and 0.1-4.0 years in the crown halves of seven teeth (1). For the five teeth with entire crowns, the absolute errors ranged between 0.3 and 3.0 years (2). CONCLUSION: The absolute error of 14C-based year of birth estimation using the powdered crown of the mandibular first premolar teeth ranged between 0.1 and 4.0 years. Our method, which involves pulverizing an entire crown, eliminates the need for the equipment, time, and labor associated with enamel isolation. Therefore, 14C dating using powdered crowns of mandibular premolars can be useful for birth year estimation.

Validity of dental findings for identification by postmortem computed tomography.

Postmortem computed tomography (PMCT) images help identify individuals and extract information from corpses. PMCT may substitute for a standard examination when bodies are severely damaged or when resources are limited in a mass fatality incident. In such situations, the dental information revealed by PMCT has the potential to narrow down candidates for identification further. However, the validity of the dental findings obtained from PMCT images remains unclear. In this study, we investigated the validity of dental findings on PMCT images compared to regular dental examinations as the reference standard. We routinely collected PMCT images of 148 unidentified corpses and compared the dental findings of each tooth obtained from PMCT with those of a regular dental examination. The validity of dental findings of PMCT was measured by sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV). We also evaluated the accuracy of dental findings per corpse using 32 teeth as the denominator. The dental findings with high sensitivity and high specificity were a present tooth (0.96 and 0.97), a missing tooth (0.97 and 0.97), pontic (0.92 and 1.00), a dental implant (1.00 and 1.00), and a root filling (0.94 and 0.99). The mean accuracy of the dental findings per corpse in PMCT was 95.6% (standard deviation: 6.9, minimum ≤ median ≤ maximum: 65.6 ≤ 100 ≤ 100). The number of corpses with 100% accuracy in the dental findings was 81 (54.7%). The information obtained in this study highlights the potential use of PMCT during human identification in several settings with limited resources, such as the number of specialists present and the condition of the corpses.

Fatal atlantoaxial dislocation due to an odontoid synchondrosis fracture in a child with chromosome 9 abnormality: A case report.

A 5-year-old boy with a chromosome-9 abnormality and multiple external and visceral malformations was found in cardiopulmonary arrest during a regular visit to the hospital; he did not respond to cardiopulmonary resuscitation and died. An odontoid process fracture and calcification and fibrosis of the muscles around the superior cervical vertebra were observed during the autopsy. Postmortem computed tomography revealed an anterior dislocation of the atlas; odontoid synchondrosis fracture; and delayed, incomplete bony fusion of the odontoid process relative to his age. The cause of his death was a superior spinal cord injury. The tissue surrounding the upper cervical spine presented with myositis ossificans, suggesting a prior injury. He experienced a minor traffic accident 3 months before his death. It was concluded that the odontoid synchondrosis fracture occurred during the accident based on the incomplete bony fusion and atlantoaxial instability, which were consistent with the findings of myositis ossificans. Delayed fatal dislocation may then have occurred under the influence of a minor external force. Odontoid process abnormalities and atlantoaxial instability are common in patients with trisomy 21 and other congenital diseases; however, the condition's association with chromosome-9 abnormalities has not been reported. In children with various chromosomal abnormalities, periodic assessment of instability and morphology of the cervical spine, and a lowered examination threshold for the children at risk, could prove useful in the prevention injuries leading to fatality, and provide additional information to rule out abuse.

Estimation of birth year by radiocarbon dating of tooth enamel: Approach to obtaining enamel powder.

Atmospheric radiocarbon (14C) levels increased from 1955 to 1963 due to atmospheric nuclear weapon tests, and then decreased. As 14C accumulates in human tooth enamel while the enamel is being formed, 14C can be used to estimate the birth year of unidentified bodies. Measurement results of 14C content in tooth enamel using accelerator mass spectrometry vary depending on the enamel's sample site. To address this problem, a method for equalizing samples using a pulverizer was considered in this study. Regarding the tube and cone used as the pulverizer, (1) a polycarbonate tube and stainless steel cone, (2) a stainless steel tube and cone, and (3) a tungsten carbide tube and cone, were compared. In (1), the modern carbon ratio was approximately half that of the normal ratio of 100 pMC, with which accurate dating was impossible, and in (2), a high background value was obtained for IAEA-C1, which was pulverized using a reusable tube and cone. In (3), the 14C content for IAEA-C1 pulverized using reusable tube and cone, which was washed with quartz sand, was 0.31 ±â€¯0.01 pMC. This result did not show any problems regarding background value. Therefore, the use of tungsten carbide products and washing with quartz sand is recommended for 14C measurement of pulverized teeth.

Incidence of three-rooted mandibular first molars among contemporary Japanese individuals determined using multidetector computed tomography.

PURPOSE: The purpose of this study was to determine the incidence of three-rooted mandibular first molars in a contemporary Japanese population using multidetector computed tomography (MDCT) and examine whether this characteristic root form may be useful for identification purposes. METHODS: Prior to their forensic autopsies, we obtained MDCT scans of 365 cadavers (255 males, 110 females) with mandibular first molars on both sides. Altogether, 730 mandibular first molars were examined morphologically on reconstructed CT images, and the incidence of three-rooted molars was recorded. The results were analyzed statistically to determine sex and left-right differences using the chi-square test. RESULTS: In all, 189 (25.9%) of the 730 mandibular first molars had three roots: 79 (31.0%) in the 255 males and 35 (31.8%) in the 110 females. No statistically significant difference was found between the sexes. In the 39 individuals who had unilateral three-rooted mandibular first molars, 7 (17.9%) were on the left side and 32 (82.1%) were on the right side, indicating a statistically significant predominance on the right side. CONCLUSIONS: The incidence of three-rooted mandibular first molars in contemporary Japanese individuals was 25.9%, with no statistically significant sex difference, but in the case of unilateral three-rooted teeth, with a statistically significant predominance on the right side. Our study found that Japanese and northeastern Asians have a high incidence of the three-rooted mandibular first molars among individuals of Mongolian origin; this finding may be a useful screening tool for identification of unknown individuals.