Facial Anthropometric Analysis of Gender-Related Characteristics in Computed Tomography.

BACKGROUND: In recent years, facial feminization surgery (FFS) has gained increasing popularity because of increases in transgender individuals and the acceptance of diversity in gender identity. However, there is still a scarcity of anthropometric research to guide evidence-based practices for FFS in Taiwan. AIM AND OBJECTIVES: The purpose of this study was to provide a reference for surgeons to achieve optimal outcomes for patients undergoing FFS. The anthropometric analysis could help surgeons meet patients' specific requirements and improve patients' alignment with their gender identity. MATERIALS AND METHODS: The study group consisted of 100 patients (50 males and 50 females) who had undergone cranial computed tomography at Chang Gung Memorial Hospital in Taiwan because of the indication of blunt injuries to the head and face with suspected skull and facial fractures. The computed tomography images were imported into the OsiriX image software to conduct an anthropometric evaluation. The parameters used in the measurements included 2 aspects: bone and soft tissue anthropometric analysis. RESULTS: Anthropometric data were obtained from 50 males (age 32.6 ± 11.4 years) and 50 females (age 33.7 ± 10.3 years). The results for bone measurements showed that both the forehead bossing length and nasal bone width in the male group were significantly greater. The frontal angle in both bone and soft tissue in the male group was significantly smaller. The chin height and bigonial width in both bone and soft tissue in the male group were significantly greater. Although the average gonial angle was greater in the female group, the difference was not significant. For the measurements of lip projection, the results showed that there was no significant difference. Although this group of Asian males had more acute nasolabial angles, the difference was not statistically significant. However, the average nasofrontal angle among females was significantly more obtuse than among males. CONCLUSION: The results revealed that Asian males tend to have more prominent superior orbital rims, wider nasal bones, and wider and taller mandibles compared with Asian females. Despite showing some trends, the gonial angle and lip projections did not reveal any significant differences, which is likely because of a large amount of variation.

Management Strategies for Geriatric Maxillofacial Fractures: An Anthropometric and Clinical Study in Taiwan.

BACKGROUND: Geriatric maxillofacial trauma has become an increasingly pressing clinical issue in Taiwan because of increased life expectancy. AIM AND OBJECTIVES: The purposes of this study were to investigate the anthropometric changes and the posttrauma outcomes in the aging population and to optimize the management strategies for geriatric facial fractures. MATERIALS AND METHODS: From 2015 to 2020, a total of 30 patients 65 years or older were identified to have suffered from maxillofacial fractures and presented at the emergency department of the Chang Gung Memorial Hospital (CGMH). These patients were categorized into group III, representing the elderly group. Two other groups (group I, age 18-40 years; group II, age 41-64 years) of patients were categorized based on their age. After applying propensity score matching to reduce bias caused by a large case number difference, patient demographics, anthropometric data, and management methods were compared and analyzed. RESULTS: Among 30 patients 65 years or older who met the inclusion criteria, the mean age of the matched group III was 77.31 ± 14.87 years, and the mean number of retained teeth was 11.77 (range, 3-20 teeth). The elderly patients had a significantly lower number of retained teeth (group I vs group II vs group III, 27.3 vs 25.23 vs 11.77; P < 0.001). Anthropometric data showed that facial bone structure degenerated significantly with advancing age. Outcome analysis demonstrated that falls accounted for 43.3% of injury mechanisms in the elderly group, followed by motorcycle accidents (30%) and car accidents (23.3%). Nineteen elderly patients (63%) received nonsurgical management. On the other hand, 86.7% of cases in the other 2 age groups underwent surgery. The average numbers of total hospital and intensive care unit stays in group III patients were 16.9 (range, 3-49 days) and 4.57 (range, 0-47 days), which was significantly longer than the other 2 age groups. CONCLUSIONS: Our results suggested that not only surgery is feasible for elderly patients with facial fractures, but an acceptable result is often obtainable. However, an eventful course, including extended hospital/intensive care unit stays and an increased risk of associated injuries and complications, may be expected.

Single-Splint, 2-Jaw Orthognathic Surgery for Correction of Facial Asymmetry: 3-Dimensional Planning and Surgical Execution.

Three-dimensional (3D) planning of orthognathic surgery (OGS) improves the treatment of facial asymmetry and malocclusion, but no consensus exists among clinicians regarding technical details. This study verified the consistency of authors' workflow and strategies between 3D planning and surgical execution for facial asymmetry. This retrospective study recruited consecutive patients (n=54) with nonsyndromic facial asymmetry associated with malocclusion. The stepwise workflow included orthodontic treatment, 3D imaging-based evaluation, planning, and transferring the virtual of single-splint 2-jaw OGS to actual surgery in all patients. Seven landmark-based measurements were selected for postoperative assessment of facial symmetry. Fifty patients had no anesthetic/surgical-related episode and procedure-related complications. Others experienced wound infection (n=1), transient TMJ discomfort (n=1), and facial numbness (n=3). Two cases had minor residual asymmetry (cheek and chin, respectively), but did not request revisionary bone or soft tissue surgery. Comparisons between the planned and postoperative 3D images with quantitative measurement revealed acceptable outcome data. The results showed a significant increase in facial symmetry at 7 landmark-based postoperative measurements for both male and female. This 3D-assisted pathway of OGS permitted achievement of consistent satisfactory results in managing facial asymmetry, with low rate of complications and secondary management.

Impact of the Different Types of Le Fort I Maxillary Surgical Movement on Nasal Width Changes: A Photogrammetric Analysis.

BACKGROUND: Le Fort I maxillary movements affect nasal width, but nasal width changes with specific movement types have not been formally addressed to date. OBJECTIVES: The purpose of this study was to analyze and compare the changes in nasal width with different maxillary movements. METHODS: A retrospective study was performed among consecutive patients who underwent bimaxillary orthognathic surgery (n = 138) and who were grouped based on the type of maxillary movement (ie, maxillary advancement with intrusion [MAI], maxillary advancement with extrusion [MAE], and maxillary setback with intrusion [MSI]). Preoperative and 12-month postoperative nasal widths were analyzed photogrammetrically by 2 blinded evaluators. RESULTS: Maxillary advancement with intrusion and MAE presented a significantly (P < 0.05) higher alar base widening than MSI did, with no significant (P > 0.05) differences between MAI and MAE. Maxillary advancement movements (MAI and MAE) showed significantly (P < 0.05) higher alar base widening than maxillary setback movement (MSI). However, no significant (P > 0.05) difference was observed between maxillary intrusion (MAI and MSI) and maxillary extrusion (MAE) movements. CONCLUSIONS: This study shows that the nasal width varies distinctly depending on the type of Le Fort I maxillary surgical movement.

An Intraoperative Rescue Procedure for the Protruding Premaxilla in the Repair of Complete Bilateral Cleft Lip: Rapid Premaxillary Molding.

BACKGROUND: Primary reconstruction of complete bilateral cleft lip and palate (BCLP) with protruding premaxilla in one-stage surgery is challenging because of the tension on muscle repair. Such patients are also common in the developing countries. For this condition, we have applied intraoperative "rapid premaxillary molding (RPM)" technique and obtained satisfactory results. METHODS: We reviewed the data of patients with complete BCLP with protruding premaxilla applying intraoperative RPM including both our institution and cleft missions to developing countries in the past 20 years. Selection criteria were patients receiving either no or insufficient preoperative molding presenting with significant protruding premaxilla, had consecutive follow-ups after surgery. To perform this technique, the surgeon holds the patient's face with both hands and compresses the protruding premaxilla with both thumbs. An intermittent but stable backward pressure is applied to the premaxilla until the segment is gradually flexible. Repeated compression is performed prior to tying the muscle sutures, at which time the premaxilla is retro-positioned and aligned with the lateral maxillary segments. Pre- and postoperative data were evaluated. RESULTS: We have treated a total of 60 patients with complete BCLP with protruding premaxilla applying intraoperative RPM. All patients tolerated the operations and there were no major intra- and postoperative complications including lip dehiscence and vomer fracture. All of them had satisfactory results such as adequate muscle repair and symmetry of the lip and nostrils. CONCLUSION: The RPM is a reliable and valuable intraoperative adjunct procedure for patients with complete BCLP presenting the protrusive premaxilla.

Skeletofacial Reconstruction for Cleft-Related Deformities: Four Decades of Evolving Cleft Care.

Skeletofacial reconstruction in skeletally mature patients with cleft lip/palate can be challenging because of multifaceted condition-specific anatomical features in addition to several repercussions from surgical intervention during the growing period. This surgical report presents the history and evolving philosophy of cleft-skeletofacial reconstruction at the Chang Gung Craniofacial Center, a referral center for cleft care in Taiwan. The maximization of satisfactory function and the appearance outcome-burden ratio have been the fundamental aims for this team to develop and upgrade cleft-skeletofacial reconstruction over the past 4 decades, with more than 10,000 mature patients treated. The study highlights key lessons learned in outcome-based and patient-oriented changes over time until the current approach, which focuses on patient-centered care with a comprehensive, multidisciplinary, and team-based model. Substantial advances in surgical, orthodontic, anesthetic, and computer imaging aspects have contributed to improving and optimizing the correction of a broad spectrum of facial and occlusal deformities while ensuring safety, predictability, efficiency, and stability in outcomes. Understanding the development and refinement of cleft-skeletofacial reconstruction over the time and transferring these time-tested and scientifically validated protocols and principles to clinical practice may serve as a reliable foundation to continue the advancement and enhancement of the delivery of surgical cleft care worldwide.

History and Evolution of Orthognathic Surgery at Chang Gung Craniofacial Center: Lessons Learned From 35-Year Experience.

BACKGROUND: Modern orthognathic surgery (OGS) was established on the basis of contributions from multidisciplinary centers worldwide. This study reports the history and evolution of OGS at the Chang Gung Craniofacial Center (CGCC) and identifies the lessons learned from 35 years of experience. METHODS: The total number of OGS procedures managed by the CGCC multidisciplinary team between 1981 and 2016 was determined. The database of the senior author (Y.-R.C.) was reviewed for consecutive OGS procedures performed between 2003 and 2016. A literature review was also performed to retrieve the contributions from the total CGCC team. RESULTS: The 35 years of experience at a single center and 13-year experience of a single surgeon corresponded to 8073 and 2883 OGS procedures, respectively. Moreover, 53 peer-reviewed articles were reviewed. Teamwork (plastic surgeons, orthodontists, and anesthetists) ensured an optimal balance between occlusion functional and facial aesthetic outcomes, with patient safety ensured and a minimum of OGS-related complications. Progression from the conventional orthodontics-first approach to the surgery-first OGS approach decreased the overall treatment time. Transition from 1-jaw to 2-jaw surgery enabled more consistent aesthetic outcomes to be achieved. Conversion from the 2-splint to the single-splint technique enabled development of a more precise tridimensional simulation plan and surgical execution, including in challenging scenarios such as malocclusion associated with facial asymmetry. Clockwise pitch rotation of the maxillomandibular complex has been designed for facial aesthetic purposes in class III malocclusion, whereas counterclockwise pitch rotation of the maxillomandibular complex improves airway function in those with sleep apnea. CONCLUSIONS: The lessons learned from experience and outcome-based articles reveal that OGS has successfully evolved at the CGCC, with a balance being achieved between functional and aesthetic outcomes and effective decreases in the burden of care (ie, morbidity, complications, and treatment time).

Electrospun Water-Borne Polyurethane Nanofibrous Membrane as a Barrier for Preventing Postoperative Peritendinous Adhesion.

Peritendinous adhesion is a major complication after tendon injury and the subsequent repairs or reconstructions. The degree of adhesion can be reduced by the interposition of a membranous barrier between the traumatized tendon and the surrounding tissue. In the present study, electrospun water-borne polyurethane (WPU) nanofibrous membranes (NFMs) were created for use after the reparation or reconstruction of tendons to reduce adhesion. In the electrospinning process, water was employed as the solvent for WPU, and this solvent was ecofriendly and nontoxic. The nanofibrous architecture and pore size of the WPU NFMs were analyzed. Their microporosity (0.78⁻1.05 µm) blocked the penetration of fibroblasts, which could result in adhesion and scarring around the tendon during healing. The release of WPU mimicked the lubrication effect of the synovial fluid produced by the synovium around the tendon. In vitro cell studies revealed that the WPU NFMs effectively reduced the number of fibroblasts that became attached and that there was no significant cytotoxicity. In vivo studies with the rabbit flexor tendon repair model revealed that WPU NFMs reduced the degree of peritendinous adhesion, as determined using a gross examination; a histological cross section evaluation; and measurements of the range of motion of interphalangeal joints (97.1 ± 14.7 and 79.0 ± 12.4 degrees in proximal and distal interphalangeal joints respectively), of the length of tendon excursion (11.6 ± 1.9 cm), and of the biomechanical properties.

Quantitative Determination of Zygomaticomaxillary Complex Position Based on Computed Tomographic Imaging.

BACKGROUND: The zygomaticomaxillary complex (ZMC) is frequently involved in craniofacial fractures. We propose an objective approach for defining the ZMC position on skeletal and soft tissue by using Amira to process 3-dimensional (3D) facial computed tomography (CT) images. AIM AND OBJECTIVES: In this study, we aim to propose 1 anthropometric system, facilitated based on CT images, which can be used in quantitative analysis of ZMC position and examine the symmetry of skeletal and soft tissue of the ZMC with high reliability and validity. METHODS: Twenty Taiwanese trauma patients with pure mandibular fracture but bilateral intact ZMCs were recruited to participate in this study. The head position was adjusted in 3D planes during the examinations. The distances between the zygion and nasion and maxillozygion and nasion were defined as the x plane. The y plane was defined as the distance between the maxillozygion to the vertex and orbitale to the vertex. The distance between the maxillozygion and opisthocranion was defined as the z plane. RESULTS: The results indicated that the intrasubject variability was 0.7 to 1.6 and 0.1 to 1.8 mm in skeletal and soft tissue, respectively. The intersubject variability ranged from 3.1 to 9.2 and 1.8 to 9.3 mm in skeletal and soft tissue, respectively. The proposed anthropometric system demonstrated high validity and reliability in ZMC measurements. No significant difference was observed among bilateral ZMCs, indicating the feasibility of the mirroring technique during surgical processes. CONCLUSIONS: We conclude that the anthropometric system for processing 3D facial CT images facilitated by Amira has potential implication in the assessment and reconstruction of the ZMC in both skeletal and soft tissue.

Comparison between one-jaw and two-jaw designs in virtual surgery planning for patients with class III malocclusion.

Orthognathic surgery is highly effective for treating maxillomandibular discrepancies in patients with class III malocclusion. However, whether one- or two-jaw surgery should be selected remains controversial. Our study aimed to evaluate quantitative differences between one-jaw and two-jaw surgical designs. In total, 100 consecutive patients with skeletal class III malocclusion who underwent orthognathic surgery with preoperative three-dimensional simulation between August 2016 and November 2021 were recruited. Based on the same final occlusal setup, a two-jaw surgery design and two types of one-jaw design were created. In total, 400 image sets, including preoperative images and three types of surgical simulation, were measured and compared. The one-jaw mandibular setback design led to improvement in most cephalometric measurements and facial symmetry. Although the one-jaw maxillary advancement design improved the ANB angle and facial convexity, it induced maxillary protrusion and reduced facial symmetry. Compared with the other designs, the two-jaw design provided significantly closer cephalometric measurements to the normative values, better symmetry, and less occlusal cant. Overall, the two-jaw design provided a quantitatively better facial appearance in terms of symmetry, proportion, and profile. Although an optimal surgical design necessitates thorough preoperative evaluation and a shared decision-making process, two-jaw surgery can be considered for improving overall facial esthetics and harmony.

Appraising mandibular prognathism in class III malocclusion following orthognathic surgery: Patient-reported and cephalometry-based outcomes.

Patients with class III malocclusion often exhibit mandibular prognathism and complain of "prognathic appearance". The overall positive effects of orthognathic surgery on facial appearance have been demonstrated using patient-reported outcome measures (PROMs), but studies investigating the correlation between subjective PROMs results and objective measurements of imaging studies are sparse in the literature. This study recruited consecutive patients with skeletal class III malocclusion who underwent two-jaw orthognathic surgery between January 2016 and January 2021. The PROMs survey was conducted focusing on subjective perception of mandibular appearance. Lateral cephalometric images were measured to examine the correlation with the PROMs results. A total of 96 patients were eligible for this study. Of these, 74 patients (77.1%) reported complete correction of prognathic appearance postoperatively, whereas 22 patients (22.9%) perceived residual prognathic appearance. In a comparison of postoperative measurements between completely and incompletely satisfied patients, there were significant differences in SNB, ANB, convexity, facial angle, Nv-B, Nv-Pog, SN'B', soft tissue facial angle, lip-chin-throat angle, N'v-B', and N'v-Pog'. The PROM results were significantly associated with the objective measurements of imaging studies. Investigating the correlation between PROMs and objective measurements enables integration of patients' perception of the outcomes into future therapeutic strategy and surgical planning, contributing to the enhancement of patient satisfaction.

Three-dimensional comparative changes in the pharyngeal airway of patients with cleft after two-jaw orthognathic surgery.

BACKGROUND: The present study evaluated the three-dimensional changes of the pharyngeal airway after orthognathic surgery (OGS) in patients with unilateral and bilateral clefts, and in unilateral cleft patients with and without pharyngeal flap (PF). METHODS: Forty-five patients with unilateral or bilateral clefts receiving OGS were enrolled. Cone-beam computed tomography images were obtained before (T0) and after (T1) OGS. We measured the pharyngeal airway volumes, minimal cross-sectional area, and the horizontal displacement of facial landmarks. RESULTS: The patients with bilateral cleft exhibited smaller initial velopharyngeal volume (unilateral: 8623 mm 3; bilateral: 7781 mm 3; p = 0.211), while the velopharyngeal volume increased significantly with median of 744 mm 3 after OGS (p = 0.031). The median horizontal displacement of A point was 2.9 and 2.6 mm among the patients with unilateral and bilateral clefts, respectively (p = 0.276), and the median horizontal displacement of B point was -2.9 and -3.3 mm among patients with unilateral and bilateral clefts, respectively (p = 0.618). The unilateral cleft patients with PF exhibited lower initial velopharyngeal volume (PF+: 7582 mm 3; PF-: 8756 mm 3; p = 0.129) and a lower increase in velopharyngeal volume (PF+: 437 mm 3; PF-: 627 mm 3; p = 0.739) after OGS. CONCLUSIONS: Midface hypoplasia and the decrease in the velopharyngeal volume were more prominent among the bilateral cleft patients and the unilateral cleft patients with PF. After OGS, the velopharyngeal volume considerably increased among the bilateral cleft patients, but no considerable differences were noted among the unilateral cleft patients with PF.

Effect of body mass index on progressive bone mineral density in patients with cleft after secondary alveolar bone grafting.

BACKGROUND: Although childhood obesity matters, the association between body mass index (BMI) and bone mineral density (BMD) progression in grafted tissue after secondary alveolar bone grafting (ABG) for children with cleft alveolus is scarcely studied. Accordingly, this study explored the influence of BMI on BMD progression after ABG. METHODS: In total, 39 patients with cleft alveolus receiving ABG at the mixed dentition stage were enrolled. Patients were classified as underweight, normal weight, or overweight or obese according to age- and sex-adjusted BMI. BMD was measured in Hounsfield units (HU) from cone-beam computed tomography scans obtained 6 months (T1) and 2 years (T2) postoperatively. Adjusted BMD (HUgrafted tissue/HUpogonion, BMDa) was used for further analysis. RESULTS: For underweight, normal-weight, and overweight or obese patients, BMDaT1 values were 72.87%, 91.85%, and 92.89%, respectively (p = 0.727); BMDaT2 values were 111.49%, 112.57%, and 113.10% (p = 0.828); and density enhancement rates were 29.24%, 24.61%, and 22.14% (p = 0.936). No significant correlation was observed between BMI and BMDaT1, BMDaT2, or density enhancement rates (p = 0.223, 0.156, and 0.972, respectively). For patients with BMI < 17 and ≥ 17 kg/m2, BMDaT1 values were 89.80% and 92.89%, respectively (p = 0.496); BMDaT2 values were 111.49% and 113.10% (p = 0.216); and density enhancement rates were 23.06% and 26.39% (p = 0.573). CONCLUSION: Patients with different BMI values had similar outcomes (BMDaT1, BMDaT2, or density enhancement rate) after our ABG procedure in the 2-year postoperative follow-up.

Long-term treatment outcome of patients with complete bilateral cleft lip and palate: a retrospective cohort study.

BACKGROUND: Patients with cleft lip and palate have functional and esthetic impairment and typically require multiple interventions in their life. Long-term evaluation following a treatment protocol, especially for patients with complete bilateral cleft lip and palate (BCLP), is important but was rarely reported in the literature. PATIENTS AND METHODS: A retrospective review was conducted on all patients with complete BCLP born between 1995 and 2002 and treated at our center. Inclusion criteria were having adequate medical records and receiving continuous multidisciplinary team care at least until 20 years of age. Exclusion criteria were lack of regular follow-up and congenital syndromic abnormalities. The medical records and photos were reviewed, and facial bone development was evaluated using cephalometric analysis. RESULTS: A total of 122 patients were included, with a mean age of 22.1 years at the final evaluation in this study. Primary one-stage cheiloplasty was performed in 91.0% of the patients, and 9.0% underwent two-stage repair with an initial adhesion cheiloplasty. All patients underwent two-flap palatoplasty at an average of 12.3 months. Surgical intervention for velopharyngeal insufficiency was required in 59.0% of patients. Revisional lip/nose surgery was performed in 31.1% during growing age and in 64.8% after skeletal maturity. Orthognathic surgery was applied in 60.7% of patients with retruded midface, of which 97.3% underwent two-jaw surgery. The average number of operations to complete the treatment was 5.9 per patient. CONCLUSION: Patients with complete BCLP remain the most challenging group to treat among the cleft. This review revealed certain suboptimal results, and modifications have been made to the treatment protocol. Longitudinal follow-up and periodic assessment help to establish an ideal therapeutic strategy and improve overall cleft care.

Comparative assessment of orthodontic and aesthetic outcomes after orthognathic surgery with clear aligner or fixed appliance therapy.

BACKGROUND: Clear aligner therapy has an aesthetic advantage over fixed appliance therapy. However, to our knowledge, no study has objectively compared patient orthodontic and aesthetic outcomes between clear aligner and fixed appliance therapies administered after orthognathic surgery (OGS). METHODS: This study included patients with no history of congenital craniofacial deformities who underwent surgery-first OGS and received clear aligner or fixed appliance therapy. The patients' grades on the Dental Health Component (DHC) and Aesthetic Component (AC) of the Index of Orthodontic Treatment Need and scores on the Peer Assessment Rating (PAR) index were calculated before OGS (T0), after OGS (T1), and after orthodontic therapy (T2). RESULTS: This study included 33 patients (clear aligner therapy, 19; fixed appliance therapy, 14). No considerable between-group differences were noted in the DHC and AC grades at T0, T1, or T2. Furthermore, %reduction in the PAR index score was more significant in the clear aligner group (74.4%) than in the fixed appliance group (63.2%) from T0 to T1 (p = .035); however, no between-group differences were noted from T1 to T2 or from T0 to T2. Both groups exhibited substantially improved DHC grades, AC grades, and PAR index scores at T1 and T2. CONCLUSIONS: Patient outcomes were similar between the clear aligner and fixed appliance groups after orthodontic therapy. However, the former group exhibited more favorable immediate results after OGS than did the latter group. Thus, as an adjunct therapy for patients with malocclusion, clear aligner therapy may be more effective than fixed appliance therapy.

Secondary Alveolar Bone Grafting in Patients with Cleft Lip and Palate: A Step-by-Step Video Series.

SUMMARY: Secondary alveolar bone grafting is one of the key surgical procedures performed to restore dental arch continuity and facilitate tooth eruption in patients with cleft lip and palate. Harvest of cancellous bone graft from the iliac crest has become the gold standard; however. there is no consensus regarding the ideal technique. An optimal bone harvest technique must be aimed at producing minimal donor-site morbidity and patient discomfort. The success of the bone grafting procedure depends largely on the surgical technique. To restore cleft alveolar defects, one must be able to conceptualize the different underlying aspects of the problem to perform an effective surgical repair. It is important for surgeons-in-service to adopt newer techniques that significantly enhance the overall outcome. This article describes two techniques of iliac bone harvest and the principles involved in execution of the alveolar bone grafting procedure. The accompanying four-part video series depicts the bone harvest, flap design, dissection of the recipient cleft alveolus, and bone grafting in a step-by-step manner.

Favorable Transverse Maxillary Development after Covering the Lateral Raw Surfaces with Buccal Fat Flaps in Modified Furlow Palatoplasty: A Three-Dimensional Imaging-Assisted Long-Term Comparative Outcome Study.

BACKGROUND: The pedicled buccal fat flap has recently been applied to cover the lateral raw surfaces during palatoplasty as an attempt to mitigate scar-induced transverse maxillary constriction during growth, but with no formal long-term comparative analysis. This three-dimensional imaging-assisted study assessed its impact on posterior transverse maxillary development. METHODS: Cone beam computed tomographic scans from patients with unilateral cleft lip, alveolus, and palate who received buccal fat flap (buccal fat group; n = 22) or Surgicel (Surgicel group; n = 32) for covering lateral raw surfaces during modified Furlow palatoplasty at 9 to 10 months of age and had reached the age of 9 years were retrieved for analysis. Patients with unilateral cleft lip and alveolus (nonpalatoplasty group; n = 24) were also included for comparison. Using three-dimensional maxillary image models, linear (U6T-MSP and U6J-MSP) and area measurements were calculated for cleft and noncleft posterior maxillary sides and for total posterior transverse maxillary dimension. RESULTS: The buccal fat group had significantly (all p < 0.05) wider dimensions compared with the Surgicel group for all transverse maxillary measurements on both the cleft and noncleft sides, except for U6J-MSP and posterior palatal area parameters on the cleft side ( p > 0.05). The buccal fat group had significantly (all p < 0.05) wider total transverse maxillary dimensions compared with the Surgicel and nonpalatoplasty groups. CONCLUSION: Covering the lateral raw surfaces with buccal fat flaps resulted in less posterior transverse maxillary constriction compared with the Surgicel-based covering procedure. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Short-term and long-term psychological impact and quality of life of patients undergoing orthognathic surgery.

BACKGROUND: Orthognathic Surgery (OGS) is a surgery for patients with dento-facial deformity but not all patients are satisfied with its outcome. The purpose of this study is to find out the short-term and long-term psychological impact and quality-of-life of OGS. METHODS: 77 participants receiving OGS and 32 age and gender-matched controls were enrolled. The data of questionnaires were collected before OGS, one month and 9 months after OGS, including short form of the Derriford-Appearance-Scale (DAS-24), Big-Five-Inventory (BFI), Hospital-Anxiety-and-Depression-Scale (HADS), Pittsburgh-sleep-quality-index (PSQI), and 36-Item Short-Form-Health-Survey (SF-36). Variables were presented as mean ± standard deviation or frequency. Paired t-test, ANOVA and MANOVA were used to evaluate the pre-and post-surgery data. RESULTS: Short-term and long-term satisfaction of OGS was high. Before OGS, BFI showed the extraversion had significant difference between the male and female OGS subgroups. Several domains of DAS-24 were significantly different between the OGS and the control groups. Both groups had no significant difference in PSQI, HADS and SF-36, except sleep-efficiency. After OGS, many domains of DAS-24 were significantly improved and the improvement persisted to 9 months later. Sleep-latency, physical-function, role-limitations-due-to-physical-health and social-functioning exacerbated after OGS. Sleep-latency, physical-function, and social-functioning were improved 9 months after OGS, but sleep-efficiency and role-limitations-due-to-physical-health were still significantly worse than controls. CONCLUSION: People received OGS for unfavorable appearance and the surgery could decrease their distress of appearance and impact to their daily living. Through long-term assessment, we should pay attention to sleep problems and role-limitations-due-to-physical-health after OGS.

Progressive Comparison of Density Assessment of Alveolar Bone Graft in Patients with Unilateral and Bilateral Cleft.

(1) Background: Continuing to observe the grafted bone mineral density (BMD) is essential to ensure the success of alveolar bone grafting (ABG) in patients with cleft lip and palate. This study elaborates on three methods that can be used to evaluate the progressive BMD. (2) Methods: Forty patients with unilateral or bilateral clefts receiving ABG were enrolled. Cone beam computed tomography (CBCT) scans were taken at 6 months (T1) and 2 years (T2) postoperatively. In CBCT, measurements were obtained on three different planes using the circle located 1 mm from the adjacent teeth (Method A), the largest circle within the defect (Method B), or the central circle with a diameter of 2 mm (Method C). The BMD was the average density of the three planes and was adjusted by pogonion density. Bland-Altman plots were used to evaluate the agreement of each method. Inter-rater reliability was confirmed by the intraclass correlation coefficient (ICC). (3) Results: For Method A, B, and C, the mean-adjusted BMD (BMD/pogonion density, BMDa) was 17.44%, 17.88%, and 17.69%, respectively, at T1 (p = 0.495), and 22.51%, 22.87%, and 22.74%, respectively, at T2 (p = 0.690); the density enhancement rates were 40.54%, 38.92%, and 43.15% (p = 0.382). Significant differences between the BMDa at T1 and T2 were observed (p < 0.001, <0.001, and 0.001, for Method A, B, and C, respectively). The volume of the grafted tissue remained stable during T1 and T2, and no significant correlation between density enhancement rate and volume loss was observed. (4) Conclusions: A significant increase in the BMD of grafted tissue was observed in the 2-year postoperative follow-up. The three methods for measuring BMDa via CBCT can be applied in post-ABG evaluations.

Refining Orthognathic Surgery Results by Synchronous Cheek Fat Compartment Augmentation with Fat Grafting in Adult Females with Class III Skeletal Profiles.

SUMMARY: Patients with maxillomandibular disharmony may present with a flat to concave midface. The effects of orthognathic surgery concomitant with midface fat grafting on facial appearance and midface volumetric and positional change have not formally been assessed to date. The authors' approach for synchronous orthognathic surgery and fat grafting is described and evaluated. Adult female patients (n = 20) who underwent synchronous two-jaw orthognathic surgery and cheek-specific fat grafting (1.9 ± 0.6 cm3 per side) for correction of skeletal class III deformity and anteromedial cheek deficiency were prospectively included. Preoperative and postoperative photographs were appraised by 42 blinded raters using facial appearance scales for beauty, attractiveness, and pleasantness parameters. The three-dimensional midface soft-tissue volume change and postoperative cheek mass position were computed. Facial imaging data from gender-, ethnic-, and facial pattern-matched adult patients (n = 20) who underwent isolated two-jaw orthognathic surgery (n = 20) were included for comparison. The three-dimensional facial norms database-derived cheek mass position information (2.19 ± 1.31mm) was also adopted for analysis. Patients treated with the synchronous procedure had significantly (p < 0.001) increased facial appearance-related perception change for beauty (2.9 ± 1.6), attractiveness (2.8 ± 1.8), and pleasantness (3.0 ± 1.5) parameters, three-dimensional midface volume change (1.8 ± 0.5 cm3), and postoperative cheek mass position (2.16 ± 0.47 mm) in comparison with those treated with the isolated procedure (2.0 ± 1.5, 1.9 ± 1.6, 2.3 ± 1.6, 0.6 ± 0.2 cm3, and 1.84 ± 0.43 mm, respectively). Healthy female individuals had similar and larger cheek mass position than patients treated with synchronous (p > 0.05) and isolated (p < 0.001) procedures, respectively. Synchronous orthognathic surgery and check-specific fat grafting resulted in superior enhancement of facial appearance and midface volume and position compared with isolated orthognathic surgery. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.