Artificial Biomolecular Channels: Enantioselective Transmembrane Transport of Amino Acids Mediated by Homochiral Zirconium Metal-Organic Cages.

Natural transport channels (or carriers), such as aquaporins, are a distinct type of biomacromolecule capable of highly effective transmembrane transport of water or ions. Such behavior is routine for biology but has proved difficult to achieve in synthetic systems. Perhaps most significantly, the enantioselective transmembrane transport of biomolecules is an especially challenging problem both for chemists and for natural systems. Herein, a group of homochiral zirconium metal-organic cages with four triangular opening windows have been proposed as artificial biomolecular channels for enantioselective transmembrane transport of natural amino acids. These structurally well-defined coordination cages are assembled from six synthetically accessible BINOL-derived chiral ligands as spacers and four n-Bu3-Cp3Zr3 clusters as vertices, forming tetrahedral-shaped architectures that feature an intrinsically chiral cavity decorated with an array of specifically positioned binding sites mediated from phenol to phenyl ether to crown ether groups. Fascinatingly, the transformation of single-molecule chirality to global supramolecular chirality within the space-restricted chiral microenvironments accompanies unprecedented chiral amplification, leading to the enantiospecific recognition of amino acids. By virtue of the highly structural stability and excellent biocompatibility, the orientation-independent cages can be molecularly embedded into lipid membranes, biomimetically serving as single-molecular chiral channels for polar-residue amino acids, with the properties that cage-1 featuring hydroxyl groups preferentially transports the l-asparagine, whereas cage-2 attaching crown ether groups spontaneously favor transporting d-arginine. We therefore develop a new type of self-assembled system that can potentially mimic the functions of transmembrane proteins in nature, which is a realistic candidate for further biomedical applications.

Water quality induced corrosion of stainless steel valves during long-term service in a reverse osmosis system.

The current study analyzes the contribution of 10 water quality parameters (including pH, turbidity, conductivity, total dissolved solids (TDS), hardness, total organic carbon (TOC), alkalinity, calcium ions, chlorides and sulfates) to corrosion extent of stainless steel valves taken from different locations in a reverse osmosis system of a reclaimed water plant. The valves were in service for 5 years. Raman spectroscopy and X-ray photoelectron spectroscopy analyses are conducted to quantify corrosion products on different valves under various water quality conditions. On that basis, bivariate and multivariate regression analyses between the 10 water quality parameters and the corrosion extent of valve specimens (represented by metal loss percentage (MLP) values) are carried out to check the contribution of those water quality parameters to MLP. The results indicate that the proportions of metal oxides as corrosion products vary according to the corrosion extent of the valves. Although no linear correlation is found, all 10 water quality parameters except for pH show a significant positive correlation with the MLP values of the valve specimens. Moreover, results of multivariate regression suggest that the variation of MLP can be explained by turbidity, TDS, TOC and sulfates. A positive contribution of turbidity, TDS and TOC to MLP is observed, whereas the contribution of sulfates is negative. The results from the current work help to identify the reasons for water quality-induced failure of stainless steel equipment in RO systems.

14.7% Efficiency Organic Photovoltaic Cells Enabled by Active Materials with a Large Electrostatic Potential Difference.

Although significant improvements have been achieved for organic photovoltaic cells (OPVs), the top-performing devices still show power conversion efficiencies far behind those of commercialized solar cells. One of the main reasons is the large driving force required for separating electron-hole pairs. Here, we demonstrate an efficiency of 14.7% in the single-junction OPV by using a new polymer donor PTO2 and a nonfullerene acceptor IT-4F. The device possesses an efficient charge generation at a low driving force. Ultrafast transient absorption measurements probe the formation of loosely bound charge pairs with extended lifetime that impedes the recombination of charge carriers in the blend. The theoretical studies reveal that the molecular electrostatic potential (ESP) between PTO2 and IT-4F is large, and the induced intermolecular electric field may assist the charge generation. The results suggest OPVs have the potential for further improvement by judicious modulation of ESP.

Icariin attenuates titanium particle-induced inhibition of osteogenic differentiation and matrix mineralization via miR-21-5p.

Inhibition of bone regeneration by wear debris is the main cause of peri-prosthetic osteolysis. Here, we investigated the effect of icariin on cell proliferation, apoptosis, osteogenic differentiation and matrix mineralization of osteoblasts in an in vitro model of titanium (Ti) particle-induced osteolysis. In the present study, MC3T3-E1 cells were pretreated with 10-8 M icariin for 4 h and then incubated with Ti particles (0.1 mg/mL). The results showed that Ti particles inhibited cell proliferation and promoted cell apoptosis of MC3T3-E1 cells, whereas icariin pretreatment blocked the effect of Ti particles. In addition, we found that icariin stimulation alone increased ALP activity, accelerated matrix mineralization and upregulated the levels of bone morphogenetic protein 2 (BMP2), Runt-related transcription factor 2 (Runx2), osteocalcin (OCN) and miR-21-5p; whereas, Ti particles alone exerted the opposite effects. Icariin partly reversed the effect of Ti particles on cell differentiation and mineralization. Twenty hours after transfection with antagomiR-21-5p or antagomiR-NC, the cells were pretreated with icariin for 4 h and then incubated with Ti particles. Further studies showed that partial knockdown of miR-21-5p abolished the promotion effect of icariin on osteoblast differentiation and matrix mineralization in Ti particle-stimulated MC3T3-E1 cells. In conclusion, miR-21-5p may be a potential pro-osteogenesis regulator and icariin may protect against Ti particle-induced inhibition of osteogenic differentiation and mineralization through upregulation of miR-21-5p.

A novel model for evaluating thrombolytic therapy in dogs with ST-elevation myocardial infarction.

BACKGROUND: There is still no standard large animal model for evaluating the effectiveness of potential thrombolytic therapies. Here, we aimed to develop a new beagle model with ST-elevation myocardial infarction (STEMI) by injecting autologous emboli with similar components of coronary thrombus. METHODS: 18 male beagles were included and divided into three groups: red embolus group (n = 6), white embolus group (n = 6) or white embolus + rt-PA group (n = 6). Autologous emboli were infused into the mid-distal region of the left anterior descending coronary artery. The composition of embolus was examined by scanning electron microscope (SEM). Coronary angiography was performed to verify the status of embolism. Myocardial infarct size was measured by 2, 3, 5- triphenyltetrazolium chloride (TTC) staining. RESULTS: Red thrombus was characteristic of loose reticular structure of erythrocytes under SEM, while the white embolus had compacted structure that mainly consisted of a dense mass of fibrin. Coronary angiography showed the recanalization rate was 2/6 in the red embolus group versus 0/6 in the white embolus group in three hours after occlusion. Arrhythmia, resolution of ST-segment elevation and lower T wave on the electrocardiogram appeared in the red embolus group but not in the white embolus group. Another six dogs with white thrombi were treated with rt-PA. Five out of six dogs exhibited coronary recanalization after two hours of therapy, compared to zero dogs without rt-PA treatment. The size of myocardial infarction in rt-PA group reduced significantly compared with white embolus group using TTC staining method. CONCLUSIONS: The white embolism model was more convenient experimentally and had a higher uniformity, stability and success rate. The major innovation of our study is that we applied fibrin-rich white thrombi to establish beagle model possessing features of clinically observed coronary thrombi in time window of intravenous thrombolysis of STEMI. This model can be used to evaluate new thrombolytic drugs for the treatment of STEMI.

Stainless steel corrosion scale formed in reclaimed water: Characteristics, model for scale growth and metal element release.

Stainless steels generally have extremely good corrosion resistance, but are still susceptible to pitting corrosion. As a result, corrosion scales can form on the surface of stainless steel after extended exposure to aggressive aqueous environments. Corrosion scales play an important role in affecting water quality. These research results showed that interior regions of stainless steel corrosion scales have a high percentage of chromium phases. We reveal the morphology, micro-structure and physicochemical characteristics of stainless steel corrosion scales. Stainless steel corrosion scale is identified as a podiform chromite deposit according to these characteristics, which is unlike deposit formed during iron corrosion. A conceptual model to explain the formation and growth of stainless steel corrosion scale is proposed based on its composition and structure. The scale growth process involves pitting corrosion on the stainless steel surface and the consecutive generation and homogeneous deposition of corrosion products, which is governed by a series of chemical and electrochemical reactions. This model shows the role of corrosion scales in the mechanism of iron and chromium release from pitting corroded stainless steel materials. The formation of corrosion scale is strongly related to water quality parameters. The presence of HClO results in higher ferric content inside the scales. Cl- and SO42- ions in reclaimed water play an important role in corrosion pitting of stainless steel and promote the formation of scales.

[Effects of Rapamycin and Rapamycin-loaded Poly(lactic-co-glycolic)Acid Nanoparticles on Apoptosis and Expression of bcl-2 and p27(kip1) Proteins of Human Umbilical Arterial Vascular Smooth Muscle Cell].

OBJECTIVE: To investgate the effects of rapamycin(RPM)and RPM-loaded poly(lactic-co-glycolic)acid(PLGA)nanoparticles(NPs)on the apoptosis of human umbilical arterial vascular smooth muscle cells(HUASMCs)in vitro and expression of bcl-2 and p27(kip1) protein. METHODS: HUASMCs were cultured in vitro and divided to RPM and RPM-PLGA-NPs groups treated at 3 different concentration by 12 and 24 hours,with M231-smooth muscle growth supplements medium and null-PLGA-NPs treated groups as controlled. The apoptosis of HUASMCs was determined by terminal deoxynucleotidyl transferase-mediated deoxyuridine triphosphate nick end labeling staining and flow cytometry. The expressions of bcl-2 and p27(kip1) were detected by streptacidin/peroxidase immunohistochemical method. The effect on cellular proliferation was assessed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromidecolorimetry. RESULTS: The proliferation of HUASMCs was inhibited by RPM and RPM-PLGA-NPs in a dose-dependent manner. DNA electrophoresis showed DNA ladder in RPM and RPM-PLGA-NPs groups and classical scalar strips in control groups. The apoptotic indexes of RPM 100 ng/ml group and RPM-PLGA-NPs 500 ng/ml group detected by flow cytometry were(45.45<2.36)% and(35.04<5.64)%,respectively,which were significantly higher than that of M231-smooth muscle growth supplements control group [(2.60<0.95)%,all P<0.01]. The apoptotic indexes of groups incubated with RPM and RPM-PLGA-NPs for 24 hours were significantly higher than those of groups which incubated for 12 hours(P<0.05,P<0.01). The positive expression indexes(PEI)of p27(kip1) and bcl-2 protein were higher in RPM and RPM-PLGA-NPs groups than that of control groups. The Spearman's rank correlation coefficient test showed that there was no significant correlation between the PEI of p27(kip1) and the apoptotic indexes in the RPM group and RPM-PLGA-NPs group(P>0.05). CONCLUSIONS: Rapamycin-loaded PLGA nanoparticles and rapamycin have similar effects in inhibiting proliferation and inducing apoptosis;meanwhile,they upregulate the expression of p27(kip1) protein without downregulating the expression of bcl-2 protein in HUASMCs in vitro. RPM-PLGA-NPs has more potent pro-apoptotic effect than equivalent dose of RPM but is not linearly correlated with the p27(kip1) expression level.

Design and evaluation of mRNA encoding recombinant neutralizing antibodies for botulinum neurotoxin type B intoxication prophylaxis.

Among all natural and synthetic toxins, botulinum neurotoxins (BoNTs), produced by Clostridium botulinum in an anaerobic environment, are the most toxic polymer proteins. Currently, the most effective modalities for botulism prevention and treatment are vaccination and antitoxin use, respectively. However, these modalities are associated with long response time for active immunization, side effects, and donor limitations. As such, the development of more promising botulism prevention and treatment modalities is warranted. Here, we designed an mRNA encoding B9-hFc - a heavy-chain antibody fused to VHH and human Fc that can neutralize BoNT serotype B (BoNT/B) effectively - and assessed its expression in vitro and in vivo. The results confirmed that our mRNA demonstrates good expression in vitro and in vivo. Moreover, a single mRNA lipid nanoparticle injection effectively prevents BoNT/B intoxication in vivo, with effects comparable to those of protein antibodies. In conclusion, we explored and clarified whether mRNA drugs encoding neutralizing antibodies prevent BoNT/B intoxication. Our results provide an efficient strategy for further research on the prevention and treatment of intoxication by botulinum toxin.

Hydroquinone cream-based polymer microneedle roller for the combined treatment of large-area chloasma.

Melasma is a common hyperpigmented skin condition that occurs on the face and other areas prone to light exposure, seriously affecting people's quality of life. Microneedle, a new type of transdermal drug delivery device, can significantly improve skin permeability. In this study, we designed and fabricated a polymer microneedle roller (PMR) using a mold hot pressing method, and established a mouse model of melasma induced by ultraviolet radiation. The dynamometer and insertion test of MNs into parafilm and skin of mice indicates that the MNs have sufficient mechanical properties to insert parafilm and skin of mice. The two methods (apply hydroquinone cream (HQC) directly and pre-treat with PMR before applying HQC) were used to treat melasma. From the results of skin surface observation, determination of superoxide dismutase (SOD) activity and malondialdehyde (MDA) content in skin and liver tissues, histological observation, and skin Optical coherence tomography (OCT), we confirmed both the two methods had a therapeutic effect while the PMR pretreatment group exhibited a better therapeutic effect. In addition, there were statistical differences between the UV group (P < 0.05). Together these results indicated that the MNs may be promising in future clinical applications in improving the UV irradiation-induced pigmentation like melisma.

Evaluation of drug load and polymer by using a 96-well plate vacuum dry system for amorphous solid dispersion drug delivery.

It is well recognized that poor dissolution rate and solubility of drug candidates are key limiting factors for oral bioavailability. While numerous technologies have been developed to enhance solubility of the drug candidates, poor water solubility continuously remains a challenge for drug delivery. Among those technologies, amorphous solid dispersions (SD) have been successfully employed to enhance both dissolution rate and solubility of poorly water-soluble drugs. This research reports a high-throughput screening technology developed by utilizing a 96-well plate system to identify optimal drug load and polymer using a solvent casting approach. A minimal amount of drug was required to evaluate optimal drug load in three different polymers with respect to solubility improvement and solid-state stability of the amorphous drug-polymer system. Validation of this method was demonstrated with three marketed drugs as well as with one internal compound. Scale up of the internal compound SD by spray drying further confirmed the validity of this method, and its quality was comparable to a larger scale process. Here, we demonstrate that our system is highly efficient, cost-effective, and robust to evaluate the feasibility of spray drying technology to produce amorphous solid dispersions.

An update on biomaterials as microneedle matrixes for biomedical applications.

Microneedles (MNs) have been developed for various applications such as drug delivery, cosmetics, diagnosis, and biosensing. To meet the requirements of MNs used in these areas, numerous materials have been used for the fabrication of MNs. However, MNs will be exposed to skin tissues after piercing the stratum corneum barrier. Thus, it is necessary to ensure that the matrix materials of MNs have the characteristics of low toxicity, good biocompatibility, biodegradability, and sufficient mechanical properties for clinical application. In this review, the matrix materials currently used for preparing MNs are summarized and reviewed in terms of these factors. In addition, MN products used on the market and their applications are summarized in the end. This work may provide some basic information to researchers in the selection of MN matrix materials and in developing new materials.

Influence of Large Steric Hinderance Substituent Position on Conformation and Charge Transfer Process for Non-Fused Ring Acceptors.

To obtain stable and planar molecular geometry in non-fused electron acceptors, A4T-25 and A4T-26 are designed and synthesized by introducing the bulk 2,4,6-triisopropylphenyl side groups onto different positions of the central two thiophene units. A4T-25 and A4T-26 both show a narrow-bandgap of 1.39 and 1.46 eV, with highest occupied molecular orbital/lowest unoccupied molecular orbital levels of -5.56/-3.81 and -5.65/-3.83 eV, respectively, and the electrostatic potential distributions imply that they have strong electron-accepting capability. The single crystal structure analysis and the transfer integral calculation demonstrate that the much more compact π-π stacking in A4T-26 can promote efficient charge transportation compared to that in A4T-25. Therefore, the electron mobility of A4T-26 is obviously higher and more balanced than that of A4T-25. When blending the two acceptors with the same polymer donor PBDB-TF, the photovoltaic cell based on PBDB-TF:A4T-25 has an inadequate power conversion efficiency (PCE) of 7.83%, while the PBDB-TF:A4T-26-based one yields an enhanced PCE of 12.1%. Overall, this study offers an insight into the relationship between the fine-tuning of the molecular structure of non-fused ring acceptors and the corresponding charge transfer process in organic solar cells.

[Comparison of Four-hook Needle and Memory Alloy Coil 
in Localization of Pulmonary Nodules].

BACKGROUND: With the extensive development of minimally invasive surgery for pulmonary nodules, preoperative localization becomes more and more critical. There are some defects in traditional localization methods, so it is necessary to improve. The aim of this study was to compare and analyze the safety and effectiveness of two new methods, namely four-hook needle and memory alloy coil, in the localization of pulmonary nodules. METHODS: A retrospective analysis of 152 patients was performed. 76 cases were in four-hook needle group, and 76 cases were in memory alloy coil group. Pulmonary nodules were located before operation, and then video-assisted wedge resection was performed. The average procedure time, localization complications and nodule resection time were counted. RESULTS: The target pulmonary nodules were successfully removed in both groups. In four-hook needle group, 76 patients found localization devices, all the pulmonary nodules were successfully removed, and one case was transferred to open the chest for wedge resection of pulmonary nodules due to severe thoracic adhesion. All 76 patients in memory alloy coil group were successfully resected with pulmonary nodules, and one patient underwent compromising enlarged resection because no lesion was found after the specimen was removed during the operation. There was no significant difference in the incidence of pneumothorax and pulmonary hemorrhage, the success rate of localization and nodule wedge resection time between the two groups. The average time of localization in four-hook needle group was (13.66±3.11) min, lower than that of memory alloy coil group (15.51±3.65) min, and the difference was statistically significant (P=0.001). In memory alloy coil group, when the distance from the nodule to the pleura was ≥1.5 cm and <1.5 cm, the average localization time was (17.20±4.46) min and (14.91±3.15) min, respectively, and there was a statistical difference between the two distance (P=0.044). CONCLUSIONS: Four-hook needle and memory alloy coil have good safety and effectiveness, and the localization time of four-hook needle is shorter. When using memory alloy coil, the effect of the method is better for pulmonary nodules with a distance less than 1.5 cm to pleura.

Improved imiquimod-induced psoriasis like dermatitis using microneedles in mice.

Psoriasis is a chronic inflammatory skin disease, in which the key features are epidermis hyperplasia, hyper-keratinization, leading to low drug absorption. As an approach of transdermal drug delivery, the microneedle (MN) has received increasing attentions for its painless penetration and efficient administration. In this study, we fabricated polylactic acid polymer MNs with hot-press method and established a psoriasis-like skin inflammation model in ear and dorsal skin of mice by topical application of imiquimod (IMQ). The dynamometer and insertion test of MNs into parafilm and skin of mice were done, revealing that the MNs have sufficient mechanical properties to insert parafilm and skin of mice. The two methods (apply calcipotriol (CAL) directly and pre-treat with MNs before applying CAL) were used to treat psoriasis and observe the skin inflammation, including skin and epidermal thickening, spleen weight gain, inflammatory cell infiltration, and expression of inflammatory cytokines of TNF-α. Both methods have a therapeutic effect and the effect of the MN pretreatment group is better. In addition, there are statistical differences between the two groups (P < 0.05). These features indicated that the MNs may be promising in future clinical applications in improving the imiquimod-induced psoriasis like dermatitis.

In vivo safety assessment, biodistribution and toxicology of polyvinyl alcohol microneedles with 160-day uninterruptedly applications in mice.

Dissolving microneedles (DMNs) are widely used in drug delivery systems since they are based on one-step application, which is simple and convenient for patients, especially for the patients such as diabetes who need daily or long-term self-administration. In general, the matrix materials of DMNs are water-soluble materials that can release the encapsulated drugs gradually by dissolving in the skin without generating sharp needle waste. However, the matrix materials of DMNs will also leave in the skin after application. Thus, it is vital to evaluate whether the matrix material of DMNs dissolved in the skin will cause health risks such as toxicity to the body or some skin-related complications to patients who frequent or long-term administration. In this work, PVA, as one of the typical matrix materials of DMNs, was selected to prepare the DMNs to research the safety of PVA-based MNs to the body after being dissolved in the skin. Briefly, in a 160 - days trial, the healthy mice were daily administrated by PVA MNs. The results showed that PVA materials mainly accumulated in the skin tissues of mice after dissolving and the concentration of PVA in the insertion sites gradually decreased and was almost undetectable at 6 days after administration. The observation of general conditions, blood hematological analysis and histological examinations of the mice demonstrated that the PVA-based MNs do not cause appreciable toxicity to the healthy mice after daily insertion in a 160 - days trial. Altogether, these results encourage further studies of PVA MNs for biomedical applications and support translation of PVA-based DMNs from pre-clinical development into clinical trials.

Recent advances in the design of cardiovascular materials for biomedical applications.

Biomaterials dominate the field of cardiovascular therapeutics, a multitude of which have been used to repair and replace injured heart tissue. This field has evolved beyond the simple selection of compatible materials and now focuses on the rational design of controlled structures that integrate with the cardiovascular system. However, the compatibility of these materials with the blood presents a major limitation to their clinical application. In this context, surface modification strategies can enhance blood compatibility and several recent advances in this area have emerged. This review summarizes the recent applications of biomaterials in cardiovascular therapies, the improvements in their biocompatibility and the surface modification technologies that have the potential to improve clinical outcomes.

Analyzing and verifying the association of spiral-wound reverse osmosis membrane fouling with different secondary effluents: full-scale experiments.

In order to analyze and verify the association of the reverse osmosis (RO) membrane fouling with water quality in full-scale plants, two RO systems (40, 000 m3/d and 20, 000 m3/d) treating different secondary effluents were operated in parallel. The quality of secondary effluents and the performance of RO systems were monitored over 12 months. Difference in foulants distribution and fouling layer composition between the two systems were evaluated by membrane autopsy and foulants characterization. Results verified that: 1) the secondary effluent from municipal sewage caused more serious membrane fouling; 2) more foulants deposited on the surface of leading membrane both in two systems (3.11 ± 0.15 g/m2 and 2.93 ± 0.13 g/m2); 3) the microbial community on the RO membrane surface contained more colonizing bacteria in the system treating municipal sewage secondary effluent ; 4) organics in the secondary effluent facilitated biofouling while higher ion concentration restrained biofouling.

Effect of polymer microneedle pre-treatment on drug distributions in the skin in vivo.

Solid microneedles (MNs) represent a useful tool for enhancing skin permeability by creating microchannels that provide a drug delivery route. To achieve the solid polymer MNs to become a clinical reality and to be commercialised, it is much essential to understand the skin penetration process. In this work, the effect of polymer MN height and density, drug molecular weight, as well as drug diffusion time on the drug permeability distribution was systemically investigated in vivo. MN with a height of 800 µm was most conductive to enhance the vertical distribution of drug permeation into the skin, while 11 × 11 MN array was most beneficial to promote the horizontal distribution of drug permeation into the skin. In addition, the increasing of drug molecular weight could reduce the drug permeability distribution and Fluorescein isothiocyanate most likely to penetrate into the skin after MNs pre-treatment. With the increase of drug diffusion time, the drug distribution in the subcutaneous gradually weakened until the drug was absorbed by the subcutaneous tissue at 8 h. These results suggest that the solid polymer MNs can penetrate the stratum corneum of the skin for enhancing drug delivery, especially small molecule drugs.

Anion-driven conformational polymorphism in homochiral helical coordination polymers.

Three homochiral 3D frameworks are assembled based on periodically ordered arrays of helices built from axial chiral 3,3'-bipyridine-5,5',6,6'-tetramethyl-2,2'-dimethoxy-1,1'-biphenyl ligands and linearly coordinated Ag(I) ions. The aggregation behavior of silver salts and the ditopic ligand in solutions was investigated by a variety of techniques, including (1)H NMR, UV-vis, CD, GPC and MALDI-TOF. The cationic polymer skeleton exhibits an unprecedented conformational polymorphism in the solid-state, folding into two-, three- and four-fold helices with NO(3)(-), PF(6)(-) and ClO(4)(-) as the counteranion, respectively. The two-fold helices cross-link via argentophilic Ag-Ag interactions to form sextuple helices, which lead to a three-dimensional (3D) chiral framework. The three-fold or four-fold helices, on the other hand, self-associates in pairs to form three-dimensional tubular architectures. This anion-dependent self-assembly behavior can be rationalized by considering the sizes, geometries and binding abilities of the counteranions and subsequent chain conformation to minimize steric repulsions and maximize secondary interactions.

Immortalization and characterization of mouse floxed Bmp2/4 osteoblasts.

Generation of a floxed Bmp2/4 osteoblast cell line is a valuable tool for studying the modulatory effects of Bmp2 and Bmp4 on osteoblast differentiation as well as relevant molecular events. In this study, primary floxed Bmp2/4 mouse osteoblasts were cultured and transfected with simian virus 40 large T-antigen. Transfection was verified by polymerase chain reaction (PCR) and immunohistochemistry. To examine the characteristics of the transfected cells, morphology, proliferation and mineralization were analyzed, expression of cell-specific genes including Runx2, ATF4, Dlx3, Osx, dentin matrix protein 1, bone sialoprotein, osteopontin, osteocalcin, osteonectin and collagen type I was detected. These results show that transfected floxed Bmp2/4 osteoblasts bypassed senescence with a higher proliferation rate, but retain the genotypic and phenotypic characteristics similar to the primary cells. Thus, we for the first time demonstrate the establishment of an immortalized mouse floxed Bmp2/4 osteoblast cell line.