Laser-Induced Blood Coagulation for Surgical Application: A Scoping Review.

There is a lack of evidence-based reviews on the effects of laser irradiation on blood coagulation in the literature, despite a large number of clinical trials. We therefore evaluated the available evidence on laser irradiation parameters used in coagulation of blood to optimize physical parameters. We performed a literature search for recent scientific studies indexed between 2017 and 2023 using the databases of PubMed and ScienceDirect. Articles were selected based on defined inclusion and exclusion criteria, and 78 publications in total were eventually included in this scoping review. The following were found to produce significant benefits in blood coagulation for surgical application: (1) dentistry and oral surgeries: 980 nm, 27 s, 2 W, 1502.7 W/cm2, 26.5 J, 622 J/cm2, 400 µm; (2) urogenital disorders: 532 nm, 4 s, 40 W, 10600 W/cm2, 1.3 J, 424 J/cm2, 600 µm; (3) ophthalmic disorders: 810 nm, 1 s, 1 W, 3540 W/cm2, 0.75 J, 1326 J/cm2, 100 µm; (4) embryological surgeries: 1064 nm, 10 s, 25 W, 35400 W/cm2, 262.5 J, 371000 J/cm2, 332.5 µm; (5) dermatological disorders: 1064 nm, 20 W, 2440 W/cm2, 0.1 J, 24 J/cm2, 670 µm; (6) gastrointestinal disorders: 532 nm, 3 s, 20 W, 1051 W/cm2, 120 J, 26500 J/cm2, 760 µm; (7) neurological surgeries: 2.5 s, 1.5 W, 1035 W/cm2, 2 J, 1584 J/cm2, 385 µm; (8) pulmonary disorders: 1320 nm, 5s, 35 W, 12450 W/cm2, 250 J, 65000 J/cm2, 700 µm (9) cardiovascular disorders: 1064 nm, 16.5 s, 5 W, 1980.5 W/cm2, 900 J, 760 J/cm2, 400 µm. In conclusion, our scoping review identifies that combining data from all clinically heterogeneous studies suggests that laser irradiation reflects an effective method for inducing blood coagulation in several medical fields.

In vitro, ex vivo, and in vivo models for dental pulp regeneration.

Based on the concept of tissue engineering (Cells-Scaffold-Bioactive molecules), regenerative endodontics appeared as a new notion for dental endodontic treatment. Its approaches aim to preserve dental pulp vitality (pulp capping) or to regenerate a vascularized pulp-like tissue inside necrotic root canals by cell homing. To improve the methods of tissue engineering for pulp regeneration, numerous studies using in vitro, ex vivo, and in vivo models have been performed. This review explores the evolution of laboratory models used in such studies and classifies them according to different criteria. It starts from the initial two-dimensional in vitro models that allowed characterization of stem cell behavior, through 3D culture matrices combined with dental tissue and finally arrives at the more challenging ex vivo and in vivo models. The travel which follows the elaboration of such models reveals the difficulty in establishing reproducible laboratory models for dental pulp regeneration. The development of well-established protocols and new laboratory ex vivo and in vivo models in the field of pulp regeneration would lead to consistent results, reduction of animal experimentation, and facilitation of the translation to clinical practice.

Effects of green light photobiomodulation on Dental Pulp Stem Cells: enhanced proliferation and improved wound healing by cytoskeleton reorganization and cell softening.

Photobiomodulation (PBM) has been shown to improve cell proliferation and cell migration. Many cell types have been investigated, with most studies using deep penetrating red light irradiation. Considering the interest of surface biostimulation of oral mesenchymal cells after surgical wound, the present study aimed to assess green light irradiation effects on Dental Pulp Stem Cells' (DPSC) proliferation and migration. To understand the mechanisms underlying these effects, we investigated cytoskeleton organization and subsequent cell shape and stiffness. A 532-nm wavelength Nd:YAG laser (30 mW) was applied between 30 and 600 s on DPSC in vitro. Cell proliferation was analyzed at 24, 48, and 72 h after irradiation, by cell counting and enzymatic activity quantification (paranitrophenylphosphate phosphatase (pNPP) test). A wound healing assay was used to study cell migration after irradiation. Effects of PBM on cytoskeleton organization and cell shape were assessed by actin filaments staining. Elasticity changes after irradiation were quantified in terms of Young's modulus measured using Atomic Force Microscopy (AFM) force spectroscopy. Green light significantly improved DPSC proliferation with a maximal effect obtained after 300-s irradiation (energy fluence 5 J/cm2). This irradiation had a significant impact on cell migration, improving wound healing after 24 h. These results were concomitant with a decrease of cells' Young's modulus after irradiation. This cell softening was explained by actin cytoskeleton reorganization, with diminution of cell circularity and more abundant pseudopodia. This study highlights the interest of green laser PMB for the proliferation and migration of mesenchymal stem cells, with encouraging results for clinical application, especially for surgical wound healing procedures.

Relationship between Changes in Chemical Composition of Enamel Subsurface Lesions and the Emitted Nonlinear Optical Signals: An in vitro Study.

The development of new diagnostic technologies based on the light scattering and autofluorescence properties of dental tissues is required to improve the diagnostic ability of initial caries lesions earlier than previously done and promoting the potential of treatment without surgical intervention. The aim of this study is to correlate fluorescence-based results provided by multiphoton microscopy (MPM) with confocal Raman microscopy records using phosphate level at 960 cm-1 and the organic matrix at ∼2,931 cm-1 in healthy and demineralized human enamel. Measurements on 14 teeth were made using two incident lights of different wavelengths, released by confocal Raman microscopy and MPM. Raman phosphate peak intensity at 960 cm-1 along with organic to mineral ratio at (2,931/430 cm-1) and nonlinear optical signals (second harmonic generation [SHG] and intrinsic two-photon excited fluorescence [I2PEF]) were recorded from the demineralized and healthy enamel sites. Raman spectral maps showed that the higher the organic/mineral ratio in the demineralized enamel, the lower the intensity of mineral component in the same zone. MPM revealed new optical indicators of carious lesion as shown by the presence of a red-shifted fluorescence peak in the 650- to 750-nm area of the fluorescence spectrum of demineralized enamel. Moreover, on sample regions with insignificant autofluorescence, the emergence of the SHG signal could be noted. By comparing I2PEF images with the structural motifs observed by the confocal Raman imaging system, the morphological similarity of the acquired images was quite evident. Any change in the I2PEF spectra reflects alterations in the chemical composition of enamel. These findings may provide an important basis for potentially valuable applications of photonic tools in the clinical diagnosis of tooth pathological conditions, besides exposing the fundamental role of organic matrix in enamel integrity and reparation.

Development of a quantitative preclinical screening model for implant osseointegration in rat tail vertebra.

OBJECTIVES: Functional tooth replacement and bone regeneration are parts of the daily practice in modern dentistry, but well-reproducible and relatively inexpensive experimental models are still missing. We aimed to develop a new small animal model to monitor osseointegration utilizing the combination of multiple evaluation protocols. MATERIAL AND METHODS: After cutting the tail between the C4 and C5 vertebrae in Wistar rats, costume made, parallel walled, non-threaded implants were placed into the center of the tail parallel with its longitudinal axis using a surgical guide. Osseointegration of the titanium implants was followed between 4 and 16 weeks after surgery applying axial extraction force, and resonance frequency analysis as functional tests, and histomorphometry and micro-CT as structural evaluations. RESULTS: In functional tests, we observed that both methods are suitable for the detection of the time-dependent increase in osseointegration, but the sensitivity of the pull-out technique (an approximately five times increase with rather low standard error) was much higher than that of the resonance frequency analysis. In structural evaluations, changes in the detected bone implant contact values measured by histomorphometry (yielding 1.5 times increase, with low variations of data) were more reliable than micro-CT based evaluations to screen the developments of contact between bone and implant. CONCLUSION: Our results provide evidence that the caudal vertebrae osseointegration model is useful for the preclinical evaluation of implant integration into the bone. CLINICAL RELEVANCE: The combination of the biomechanical and structural tests offers a well-reproducible small animal system that can be suitable for studying the integration of various implant materials and surface treatments.

Performance of Fluorescence-based Systems in Early Caries Detection: A Public Health Issue.

AIM: Modern clinical caries management involves early stage caries diagnosis and should fit with dental health policy. The objective of this study was to achieve early caries detection in enamel and dentine with a laser-based system (DIAGNOdent™ pen) first and secondary with a new fluorescence intra-oral camera (Soprolife®). A visual inspection with a loupe was used as control. MATERIALS AND METHODS: Following the consolidated standards of reporting trials recommendations, 628 occlusal fissures were included for analysis. RESULTS: The sensitivity and specificity of both devices varied depending on the cutoff threshold of the caries score, and the ROC curve showed higher values for the Soprolife® than for DIAGNOdent™ pen. The values of the area under the curve decreased from 0.81 (Soprolife® in daylight) to 0.79 (Soprolife® in fluorescent mode) and 0.67 for DIAGNOdent™ pen. DIAGNOdent™ pen reproducibility (intra and inter-investigator) showed a wide dispersion, with many values scattered beyond the confidence limits (±2 SD), and the weighted kappa coefficient, which was quite low (0.58), confirmed this tendency. CONCLUSION: Caries prevalence in terms of public health policy is of interest and caries detection increased significantly when using an fluorescence-based intra-oral camera. CLINICAL SIGNIFICANCE: The clinical significance of these findings is that fluorescence could help improve caries diagnosis, reduce clinical misinterpretations, and finally benefit the patients. How to cite this article: Terrer E, Slimani A, Giraudeau N, et al. Performance of Fluorescence-based Systems in Early Caries Detection: A Public Health Issue. J Contemp Dent Pract 2019;20(10):1126-1132.

Multiphoton Microscopy for Caries Detection with ICDAS Classification.

Dentin carious lesion is a dynamic process that involves demineralization and collagen denaturation. Collagen type I is the major protein in dentin and it has been investigated based on its optical properties. Multiphoton microscopy (MPM) is a nonlinear imaging technique that reveals the caries process using the collagen two-photon excitation fluorescence (2PEF) and its second-harmonic generation (SHG). Combining the histological and the International Caries Detection and Assessment System (ICDAS) classifications with nonlinear optical spectroscopy (NLOS), 2PEF and SHG intensities of enamel and dentin were highly altered during the caries process. It has been proven that the ratio SHG/2PEF is a relevant indicator of the organic matrix denaturation [Terrer et al.: J Dent Res 2016; 96: 574-579]. In the present study, a series of measurable signals is made to detect early stages of carious lesion according to the ICDAS classification and to explore the relationship between these measures and the ICDAS scale. Comparison of the efficiency of nonlinear optical signals for caries detection with the ICDAS classification is essential to evaluate their potential for clinical application. In our study, the use of the NLOS measured by MPM allowed us to monitor a quantitative parameter (SHG/2PEF ratio) according to the dentin carious lesion state (ICDAS and histological examination). Three coherent new groups were defined (ICDAS 0/1; ICDAS 2/3; ICDAS 4/5/6), where the carious process can be clearly described with a statistically significant decrease of the SHG/2PEF ratio.

Glass Ceramic CAD/CAM crowns and severely altered posterior teeth: a three levels study.

For many practitioners, longevity of full glass ceramic crowns in the posterior area, molars and premolars, remains a real challenge. The purpose of this article is to identify and evaluate the parameters that can significantly influence their resistance when preparing a tooth. The analysis proposed in this article relies on interrelated studies conducted at three levels: in vitro (mechanical tests), in silico (finite elements simulations) and in vivo (clinical survival rates). The in vitro and the in silico studies proved that an appropriate variation of the geometric design of the preparations enables to increase up to 80% the mechanical strength of ceramic reconstructions. The in vivo clinical study of CAD/CAM full ceramic crowns was performed in accordance with the principles stated within the in vitro and the in silico studies and provided a 98.97% success rate over a 6 years period. The variations of geometric design parameters for dental preparation allows for reconstructions with a mechanical breaking up to 80% higher than that of a non-appropriate combination. These results are confirmed in clinical practice.

Effect of stem cells of dental pulp origin on osseointegration of titanium implant in a novel rat vertebra model.

During that last decade a large number of experiments showed the successful application of stem cells in achieving large bone volume regeneration. On the contrary, our knowledge about the promotion of implant osseointegration by stem cell is sporadic. Recently, our research group has carried out an array of studies aiming the characterization of postnatal stem cells of dental origin. In addition, we have developed a novel quantitative model for implant osseointegration in rat tail vertebrae. In the present work we aimed to study how the implant osseointegration process is affected by mesenchymal stem cells of rat dental pulp origin (DPSC) when cells are undifferentiated or predifferentiated into osteogenic direction. Our results show that undifferentiated pulp cells inserted between the implant and the bone slow down the osseointegration process. On the other hand, pre-differentiated DPSCs do not have a similar adverse effect any more. Our data suggest that the success of mesenchymal stem cell application to promote implant osseointegration is highly dependent on the applied conditions, particularly on the parallel applicatioh of scaffolds and osteogenic components.

Polyetheretherketone (PEEK) for medical applications.

Polyetheretherketone (PEEK) is a polyaromatic semi-crystalline thermoplastic polymer with mechanical properties favorable for bio-medical applications. Polyetheretherketone forms: PEEK-LT1, PEEK-LT2, and PEEK-LT3 have already been applied in different surgical fields: spine surgery, orthopedic surgery, maxillo-facial surgery etc. Synthesis of PEEK composites broadens the physicochemical and mechanical properties of PEEK materials. To improve their osteoinductive and antimicrobial capabilities, different types of functionalization of PEEK surfaces and changes in PEEK structure were proposed. PEEK based materials are becoming an important group of biomaterials used for bone and cartilage replacement as well as in a large number of diverse medical fields. The current paper describes the structural changes and the surface functionalization of PEEK materials and their most common biomedical applications. The possibility to use these materials in 3D printing process could increase the scientific interest and their future development as well.

Strategies For Immobilization Of Bioactive Organic Molecules On Titanium Implant Surfaces - A Review.

Numerous approaches have been used to improve the tissue-implant interface of titanium (Ti) and titanium alloy (Ti6Al4V). They all aim at increasing cell migration and attachment to the metal, preventing unspecific protein adsorption and improving post-implantation healing process. Promising methods for titanium and titanium alloy surface modification are based on the immobilization of biologically active organic molecules. New and interesting biochemical approaches to such surface modification include layer-by-layer deposition of polyelectrolyte films, phage display-selected surface binding peptides and self-assembled DNA monolayer systems. The present review summarizes the scientific information about these methods, which are at in vitro or in vivo development stages, and hopes to promote their future application in dental implantology and in oral and maxillofacial surgery.

In vitro investigation of fluorescence of carious dentin observed with a Soprolife® camera.

OBJECTIVES: Our aim was to determine the origin of the red fluorescence of carious dentine observed with the Soprolife® camera. METHODS: We conducted in vitro studies to evaluate the origin of the red fluorescence using acids and matrix metalloproteinase (MMP) to mimic caries and methylglycoxal (MGO) to evaluate the effect of glycation reactions on the red fluorescence. In every step of these models, we detected the changes of dentin photonic response with Soprolife® in daylight mode and in treatment mode. A Raman spectroscopy analysis was performed to determine the variations of the dentin organic during the in vitro caries processes. Raman microscopy was performed to identify change in the collagen matrix of dentine. RESULTS: The red fluorescence observed in carious dentine using a Soprolife® camera corresponds to the brownish color observed using daylight. Demineralization using nitric acid induces a loss of the green fluorescence of dentine. The red fluorescence of carious dentine is resistant to acid treatment. Immersion of demineralized dentine in MGO induces a change of color from white to orange-red. This indicates that the Maillard reaction contributes to lesion coloration. Immersion of demineralized dentine in an MMP-1 solution followed by MGO treatment results in a similar red fluorescence. Raman microspectroscopy analysis reveals accumulation of AGE's product in red-colored dentine. CONCLUSIONS: Our results provide important information on the origin of the fluorescence variation of dentine observed with the Soprolife® camera. We demonstrate that the red fluorescence of carious dentine is linked to the accumulation of Advanced Glycation End products (AGE). CLINICAL RELEVANCE: The study provides a new biological basis for the red fluorescence of carious dentine and reinforces the importance of the Soprolife® camera in caries diagnostics.

The Secretome of Human Dental Pulp Stem Cells and Its Components GDF15 and HB-EGF Protect Amyotrophic Lateral Sclerosis Motoneurons against Death.

Amyotrophic lateral sclerosis (ALS) is a fatal and incurable paralytic disorder caused by the progressive death of upper and lower motoneurons. Although numerous strategies have been developed to slow disease progression and improve life quality, to date only a few therapeutic treatments are available with still unsatisfactory therapeutic benefits. The secretome of dental pulp stem cells (DPSCs) contains numerous neurotrophic factors that could promote motoneuron survival. Accordingly, DPSCs confer neuroprotective benefits to the SOD1G93A mouse model of ALS. However, the mode of action of DPSC secretome on motoneurons remains largely unknown. Here, we used conditioned medium of human DPSCs (DPSCs-CM) and assessed its effect on survival, axonal length, and electrical activity of cultured wildtype and SOD1G93A motoneurons. To further understand the role of individual factors secreted by DPSCs and to circumvent the secretome variability bias, we focused on GDF15 and HB-EGF whose neuroprotective properties remain elusive in the ALS pathogenic context. DPSCs-CM rescues motoneurons from trophic factor deprivation-induced death, promotes axon outgrowth of wildtype but not SOD1G93A mutant motoneurons, and has no impact on the spontaneous electrical activity of wildtype or mutant motoneurons. Both GDF15 and HB-EGF protect SOD1G93A motoneurons against nitric oxide-induced death, but not against death induced by trophic factor deprivation. GDF15 and HB-EGF receptors were found to be expressed in the spinal cord, with a two-fold increase in expression for the GDF15 low-affinity receptor in SOD1G93A mice. Therefore, the secretome of DPSCs appears as a new potential therapeutic candidate for ALS.

Allogenic Stem Cells Carried by Porous Silicon Scaffolds for Active Bone Regeneration In Vivo.

To date, bone regeneration techniques use many biomaterials for bone grafting with limited efficiencies. For this purpose, tissue engineering combining biomaterials and stem cells is an important avenue of development to improve bone regeneration. Among potentially usable non-toxic and bioresorbable scaffolds, porous silicon (pSi) is an interesting biomaterial for bone engineering. The possibility of modifying its surface can allow a better cellular adhesion as well as a control of its rate of resorption. Moreover, release of silicic acid upon resorption of its nanostructure has been previously proved to enhance stem cell osteodifferentiation by inducing calcium phosphate formation. In the present study, we used a rat tail model to experiment bone tissue engineering with a critical size defect. Two groups with five rats per group of male Wistar rats were used. In each rat, four vertebrae were used for biomaterial implantation. Randomized bone defects were filled with pSi particles alone or pSi particles carrying dental pulp stem cells (DPSC). Regeneration was evaluated in comparison to empty defect and defects filled with xenogenic bone substitute (Bio-Oss®). Fluorescence microscopy and SEM evaluations showed adhesion of DPSCs on pSi particles with cells exhibiting distribution throughout the biomaterial. Histological analyzes revealed the formation of a collagen network when the defects were filled with pSi, unlike the positive control using Bio-Oss®. Overall bone formation was objectivated with µCT analysis and showed a higher bone mineral density with pSi particles combining DPSC. Immunohistochemical assays confirmed the increased expression of bone markers (osteocalcin) when pSi particles carried DPSC. Surprisingly, no grafted cells remained in the regenerated area after one month of healing, even though the grafting of DPSC clearly increased bone regeneration for both bone marker expression and overall bone formation objectivated with µCT. In conclusion, our results show that the association of pSi with DPSCs in vivo leads to greater bone formation, compared to a pSi graft without DPSCs. Our results highlight the paracrine role of grafted stem cells by recruitment and stimulation of endogenous cells.

Biomechanical characterization of a fibrinogen-blood hydrogel for human dental pulp regeneration.

In dental practice, Regenerative Endodontic Treatment (RET) is applied as an alternative to classical endodontic treatments of immature necrotic teeth. This procedure, also known as dental pulp revitalization, relies on the formation of a blood clot inside the root canal leading to the formation of a reparative vascularized tissue similar to dental pulp, which would provide vitality to the affected tooth. Despite the benefit of this technique, it lacks reproducibility due to the fast degradation and poor mechanical properties of blood clots. This work presents a method for constructing a fibrinogen-blood hydrogel that mimics the viscoelastic properties of human dental pulp while preserving the biological properties of blood for application in RET. By varying the blood and fibrinogen concentrations, gels with different biomechanical and biological properties were obtained. Rheology and atomic force microscopy (AFM) were combined to study the viscoelastic properties. AFM was used to evaluate the elasticity of human dental pulp. The degradation and swelling rates were assessed by measuring weight changes. The biomimetic properties of the gels were demonstrated by studying the cell survival and proliferation of dental pulp cells (DPCs) for 14 days. The formation of an extracellular matrix (ECM) was assessed by multiphoton microscopy (MPM). The angiogenic potential was evaluated by an ex vivo aortic ring assay, in which the endothelial cells were observed by histological staining after migration. The results show that the Fbg-blood gel prepared with 9 mg ml-1 fibrinogen and 50% blood of the Fbg solution volume has similar elasticity to human dental pulp and adequate degradation and swelling rates. It also allows cell survival and ECM secretion and enhances endothelial cell migration and formation of neovessel-like structures.

Prevention and repair of orthodontically induced root resorption using ultrasound: a scoping review.

INTRODUCTION: This review summarizes the available recent literature on different mechanisms and parameters of pulsed ultrasound (US) that have been used during orthodontic treatments to prevent and repair root resorption. AREAS COVERED: A literature search was conducted between January (2002) and September (2022) in the following databases: PubMed, Google-Scholar, Embase, and The-Cochrane-Library. After exclusions, a total of 19 papers were included in the present review. The most used US parameters with positive outcomes were frequency of 1.5 MHz, pulse repetition frequency of 1000 Hz, output intensity of 30 mW/cm2, duration of application of 20 min and total number sessions were 14 with a repetition interval of 1 day. The suggested mechanisms induced by US were alteration of cementoblasts, osteoblasts, osteoclasts, alkaline-phosphatase (ALP), runt-related-gene-2 (Runx2), osteoprotegerin (OPG), type-I-collagen (Col-I), C-telopeptide-type-I-collagen (CTX-I), hepatocyte-growth-factor (HGF), bone morphogenetic protein-2 (BMP-2), cyclooxygenase-2 (Cox-2), calcium (Ca2+), receptor activator of nuclear factor-kappa-B ligand (RANKL), and receptor activator of nuclear factor-kappa-B (RANK). EXPERT OPINION: Understanding mechanisms and deciding which parameters of US that can be used during orthodontic treatment to prevent and repair root resorption is a great challenge. This work summarizes all the available data that can aid this process and suggest that US is an effective noninvasive method not only in prevention and repairing of orthodontic induced root resorption but also in accelerating teeth movement.

Properties of dentin, enamel and their junction, studied with Brillouin scattering and compared to Raman microscopy.

OBJECTIVE: Dentin, enamel and the transition zone, called the dentin-enamel junction (DEJ), have an organization and properties that play a critical role in tooth resilience and in stopping the propagation of cracks. Understanding their chemical and micro-biomechanical properties is then of foremost importance. The aim of this study is to apply Brillouin microscopy on a complex biological structure, that is, the DEJ, and to compare these results with those obtained with Raman microscopy. DESIGN: Both techniques allow noncontact measurements at the microscopic scale. Brillouin microscopy is based on the interaction between acoustic phonons and laser photons and gives a relation between the frequency shift of the scattered light and the stiffness of the sample. Raman spectra contain peaks related to specific chemical bonds. RESULTS: Comparison of the Brillouin and Raman cartographies reveals correlations between mechanical and chemical properties. Indeed, the shapes of the phosphate content and stiffness curves are similar. The two spectroscopies give compatible values for the mean distance between two tubules, i.e., 4-6 µm. Moreover, for the first time, the daily cross striations of enamel could be studied, indicating a relationship between the variation in the phosphate concentration and the variation in the rigidity within the enamel prisms. CONCLUSIONS: We demonstrate here the possibility of using Brillouin scattering microscopy to both study complex biological materials such as the enamel-dentin junction and visualize secondary structures. Correlations between the chemical composition and mechanical properties could help in better understanding the tissue histology.

Improving dental epithelial junction on dental implants with bioengineered peptides.

Introduction: The functionalization of titanium (Ti) and titanium alloys (Ti6Al4V) implant surfaces via material-specific peptides influence host/biomaterial interaction. The impact of using peptides as molecular linkers between cells and implant material to improve keratinocyte adhesion is reported. Results: The metal binding peptides (MBP-1, MBP-2) SVSVGMKPSPRP and WDPPTLKRPVSP were selected via phage display and combined with laminin-5 or E-cadherin epithelial cell specific peptides (CSP-1, CSP-2) to engineer four metal-cell specific peptides (MCSPs). Single-cell force spectroscopy and cell adhesion experiments were performed to select the most promising candidate. In vivo tests using the dental implant for rats showed that the selected bi functional peptide not only enabled stable cell adhesion on the trans-gingival part of the dental implant but also arrested the unwanted apical migration of epithelial cells. Conclusion: The results demonstrated the outstanding performance of the bioengineered peptide in improving epithelial adhesion to Ti based implants and pointed towards promising new opportunities for applications in clinical practice.

Molecular structural analysis of carious lesions using micro-Raman spectroscopy.

In clinical situations carious dentine tissues can be discriminated by most caries fluorescence detection tools, including a new fluorescence intra-oral camera. The objectives of this study were: (i) to analyze the Raman spectra of sound, carious, and demineralized dentine, (ii) to compare this spectral analysis with the fluorescence variation observed when using a fluorescence camera, and (iii) to evaluate the involvement of the Maillard reaction in the fluorescence variations. The first positive hypothesis tested was that the fluorescence of carious dentine obtained using a fluorescence camera and the Raman spectra variation were closely related. The second was that the variation of fluorescence could be linked with the Maillard reaction. Sound dentine, sound dentine demineralized in aqueous nitric acid solution, carious soft dentine, sound dentine demineralized in lactic acid solution, sound dentine demineralized in aqueous nitric acid solution and immersed in methylglycoxal solution, and sound dentine demineralized in aqueous nitric acid solution and immersed in methylglycoxal and glucose solutions, were studied using micro-Raman spectroscopy. Modifications in the band ratio of amide, phosphate, and carbonate were observed in the decayed and demineralized groups compared with the sound dentine group. The results indicate that a close relationship exists between the Maillard reaction and fluorescence variation.

Confocal Raman microscopy and SEM/EDS investigations of the interface between the zirconia core and veneering ceramic: the influence of a liner and regeneration firing.

The aim of this study was to evaluate the changes in the transition layer at the interface between yttria partial stabilized tetragonal zirconia polycrystalline (Y-TZP) core and veneering feldspathic ceramic (VITA VM(®)9), under different manufacturing methods. Confocal Raman microscopy and energy dispersive X-ray spectroscopy (EDS) analyses were carried out on tapered veneered cross sections of the interface. For some samples, an additional firing of the core was used, as the application of an optional liner material between the core and veneer. Single Raman spectra were distinguishable between Y-TZP and the veneering materials. VM(®)9 and liner spectra were broadly superimposable. No substantial differences appeared in their chemical elemental composition. 2D Raman images and EDS analysis emphasized changes in the interdiffusion thickness; the additional firing of the core decreased the interdiffusion zone, and the highest firing temperature of the liner increased the interdiffusion zone. These results, which will help us understand the changes in this transition layer, are discussed.