RESUMEN
OBJECTIVES: To perform a systematic review of animal studies that compared the histopathological characteristics between teeth with apical periodontitis after endodontic treatment in one or two visits. MATERIALS AND METHODS: This systematic review was registered on the International Prospective Register of Systematic Reviews (PROSPERO) - CRD42022340849. Studies were collected from PubMed/MEDLINE, LILACS, EMBASE, Livivo, SciELO, Web of Science, Scopus, and Cochrane Library and manual and gray literature searches. Animal studies that evaluated histological characteristics after endodontic treatment of teeth with apical periodontitis in one or two visits were included. Risk of bias analysis of the included studies was performed using the Systematic Review Centre for Laboratory Animal Experimentation (SYRCLE) tool. Data synthesis of the included studies with quantitative data was performed, and meta-analysis was conducted with the Comprehensive Meta-Analysis software, using the random effects model and odds ratio (OR). RESULTS: Eighteen studies met the inclusion criteria (Kappa = 0.891). Meta-analyses indicated values in inflammatory infiltrate intensity with effect size of 5.5% (95% CI: 0.020-0.148; p < 0.001), periodontal ligament thickness: 25.6% (95% CI: 0.134-0.487; p < 0.001), dentin resorption: 13% (95% CI: 0.015-1.141; p = 0.066), cementum resorption: 7.1% (95% CI: 0.015-0.325; p = 0.001), bone resorption: 1.4% (95% CI: 0.002-0.130; p < 0.001), mineralized tissue resorption: 42.8% (95% CI: 0.110-1.671; p = 0.222), biological apical sealing: 13.1% (95% CI: 0.055-0.314; p < 0.001), and presence of microorganisms: 10.3% (95% CI: 0.014-0.747; p = 0.025). CONCLUSIONS: When considering animal studies, the two-visit endodontic treatment, using calcium hydroxide-based intracanal medication, resulted in better biological repair characteristics. CLINICAL RELEVANCE: A two-visit endodontic treatment with calcium hydroxide-based intracanal medication yields superior histopathological outcomes.
Asunto(s)
Periodontitis Periapical , Tratamiento del Conducto Radicular , Animales , Tratamiento del Conducto Radicular/métodos , Periodontitis Periapical/terapiaRESUMEN
OBJECTIVES: This ex vivo study aimed to evaluate the influence of different filling techniques on the filling removal from oval root canals filled with bioceramic sealer. METHODS: Thirty-six mandibular incisors with single oval canals were filled with bioceramic sealer following the techniques (n = 12): single-cone, modified McSpadden, or continuous wave of condensation, and scanned by micro-computed tomography (micro-CT). The filling was removed using the Clearsonic ultrasound tip and Reciproc system up to the R40 instrument, and the working time was recorded. The teeth were scanned again by micro-CT. Percentage of remnant volume (mm³) of the filling material, dentin thickness, and root canal transportation were measured. The data was analyzed using parametric and non-parametric tests with a significance level of 5%. RESULTS: It took more time to remove the filling material using the continuous wave of condensation technique (p < 0.05), followed by the modified McSpadden and single-cone techniques. There was no difference (p > 0.05) when comparing the percentage of remaining filling material among the three groups, nor did it among the segments of each tooth. There was also no difference in the analysis of dentin thickness and transportation when comparing the groups (p > 0.05). CONCLUSIONS: The filling technique did not influence the amount of remaining filling material, dentin thickness, and transportation. The working time was longer with thermoplastic filling techniques. CLINICAL RELEVANCE: Endodontic retreatment in teeth filled with bioceramic sealers increases with their use. Several techniques are used to fill the root canals, thus, it is important to know whether the filling technique influences the non-surgical endodontic retreatment.
Asunto(s)
Incisivo , Materiales de Obturación del Conducto Radicular , Obturación del Conducto Radicular , Microtomografía por Rayos X , Humanos , Técnicas In Vitro , Obturación del Conducto Radicular/métodos , Incisivo/diagnóstico por imagen , Mandíbula/diagnóstico por imagen , Preparación del Conducto Radicular/métodos , Preparación del Conducto Radicular/instrumentación , Cavidad Pulpar/diagnóstico por imagenRESUMEN
AIM: To evaluate the influence of different kinematics on the efficiency and safety of an engine-driven file for glide path preparation in second mesiobuccal canals (MB2) of maxillary molars. In addition, the torsional resistance of the file was assessed after use. METHODOLOGY: Thirty-six maxillary first and second molars with two canals in the mesiobuccal root were selected and the anatomy of the canals was verified by micro-CT. The teeth were divided into 4 groups (n = 9) according to the kinematics used for glide path preparation: continuous rotation (CR), 30°/150° reciprocation (REC 30°/150°), 30°/90° reciprocation (REC 30°/90°), and 90° optimum glide path motion (OGP 90°). The duration of the procedure, number of canals in which the file reached the full working length (RFWL), canal volume before and after the procedure, rate of file fracture, and file torsional strength after use were evaluated. The ANOVA and Tukey tests or Kruskal-Wallis and Dunn tests were used for statistical analysis. RESULTS: No significant differences among the groups were found for procedure duration, success at reaching the FWL, distance from the file to apex, and number of fractured files (P > 0.05). The CR group showed a significant decrease in rotation angle compared with REC 90° and OGP 90° groups (P < 0.05). There was no significant difference in canal volume among the groups (P > 0.05). CONCLUSION: The type of kinematics used did not affect the efficiency, success rate, and shaping ability of the file during glide path preparation. CR seems to induce more torsional stress than the other kinematics. CLINICAL RELEVANCE: The glide path preparation of narrow canals such as the MB2 is difficult and accidents such as file fracture may occur. This study showed that reciprocation with different file angulations can be safer during this challenging stage.
Asunto(s)
Preparación del Conducto Radicular , Raíz del Diente , Fenómenos Biomecánicos , Preparación del Conducto Radicular/métodos , Diente Molar , Cavidad Pulpar , Diseño de EquipoRESUMEN
OBJECTIVES: To analyze the effect of biological sex and aging on craniofacial bone features in 129 Sv mice and their influence on dental socket healing post tooth extraction. MATERIALS AND METHODS: A total of 52 129 Sv mice were used, of which 28 were young (3-4 months) and 24 were aged (17-18 months), equally distributed according to biological sex. After an upper right incisor extraction, mice specimens were collected at 7, 14, and 21-days post-surgery for microtomographic (microCT) and comprehensive histological analysis. Mandible, skull bones, and maxillae at 21 days were analyzed by microCT, while blood plasma samples were collected for the detection of key bone turnover markers (P1NP and CTX-1) by enzyme-linked immunosorbent (ELISA) assay. RESULTS: Aged females depicted significantly decreased mineralized bone content in alveolar sockets in comparison to young females and aged males at day 7, and aged males at day 14. Mandible RCA and Ma.AR of aged females were also significantly decreased in comparison with young females. Histological evaluation revealed that all alveolar sockets healed at 21 days with inflammation resolution and deposition of new bone. Immunohistochemistry for TRAP revealed increased area density for osteoclasts in alveolar sockets of aged females when compared to young females at 21 days. While a significant increase in CTX-1 levels was detected in blood plasma of aged females when compared to young females, P1NP levels did not significantly change between young and older females. No significant changes were observed for males. CONCLUSIONS: Age and gender can significantly affect craniofacial bones of 129 Sv mice, especially maxilla and mandible in females. Considering the altered bone resorption parameters and delayed alveolar bone healing in older females, careful deliberation is necessary during development of pre-clinical models for craniofacial research. CLINICAL RELEVANCE: Aging can be a contributing factor to slower bone healing in craniofacial bones. However, there are no sufficient experimental studies that have addressed this phenomenon along with biological sex taken into consideration.
Asunto(s)
Resorción Ósea , Alveolo Dental , Humanos , Masculino , Femenino , Ratones , Animales , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Alveolo Dental/patología , Extracción Dental/métodos , Resorción Ósea/patología , Atención Odontológica , Ligamento PeriodontalRESUMEN
OBJECTIVES: The study aimed to evaluate the potential for the dissolution of organic tissue in areas of simulated complexity and cleaning of root canal walls of the new iVac® endodontic irrigation system. MATERIAL AND METHODS: Thirty mandibular premolars were evaluated by scanning electron microscopy before and after biomechanical preparation. Then, they were distributed according to the final irrigation protocol into groups with conventional irrigation, ultrasonic agitation with metallic insert (UA), and iVac® system, and new photomicrographs were obtained. For tissue dissolution analysis, glass capillaries filled with catgut were attached to the cervical and apical thirds of twenty-one prototyped upper incisors. They were weighed before and after the previously mentioned irrigation protocols. The data were statistically compared with a significance level of 5%. RESULTS: The final irrigation provided greater cleaning of the root canal walls in the cervical, middle, and apical thirds of the root canals (P < 0.05), with no statistically significant difference between UA and iVac®, regardless of the analyzed thirds. Both ultrasonic irrigation protocols dissolved a significantly greater volume than the conventional irrigation protocol (P < 0.05), with no difference between the two protocols (P < 0.05). CONCLUSIONS: The iVac® system showed root canal wall cleaning and tissue dissolution similar to UA with a metallic insert, and both were superior to conventional irrigation. CLINICAL RELEVANCE: The new irrigation system iVac is more effective than conventional irrigation and has similar root canal wall cleaning and tissue dissolution to UA.
Asunto(s)
Capa de Barro Dentinario , Humanos , Vidrio , Incisivo , Microscopía Electrónica de Rastreo , CuelloRESUMEN
Bone metabolism and repair are directly regulated by arachidonic acid metabolites. At present, we analyzed the dose-response effects of a selective cysteinyl leukotriene receptor type-1 antagonist during bone repair after tooth extraction and on non-injured skeleton. Sixty-three 129 Sv/Ev male mice composed the groups: C-Control (saline solution); MTK2-2 mg/Kg of Montelukast (MTK) and MTK4-4 mg/Kg of MTK, daily administered by mouth throughout all experimental periods set at 7, 14, and 21 days post-operative. Dental sockets were analyzed by computed microtomography (microCT), histopathology, and immunohistochemistry. Femurs, L5 vertebra and organs were also removed for observation. Blood was collected for plasma bone and liver markers. Histopathology and microCT analysis revealed early socket repair of MTK2 and MTK4 animals, with significant increased BV/TV at days 14 and 21 compared to C. Higher plasma calcium was detected at days 7 and 21 in MTK4 in comparison to C, while phosphate was significantly increased in MTK2 in the same periods in comparison to C and MTK4. No significant differences were found regarding plasma ALP and TRAP, neither for local TRAP and Runx2 immunolabeling at the healing sockets. Organs did not present histological abnormalities. Increased AST levels have been detected in distinct groups and periods. In general, femur phenotype was improved in MTK treated animals. Collectively, MTK promoted early bone formation after tooth extraction and increased bone quality of femurs and vertebra in a time-dose-dependent manner, and should be considered as an alternative therapy when improved post-extraction socket repair or skeleton preservation is required.
Asunto(s)
Alveolo Dental , Cicatrización de Heridas , Masculino , Ratones , Animales , Alveolo Dental/patología , Alveolo Dental/cirugía , Cicatrización de Heridas/fisiología , Extracción Dental , Acetatos/farmacologíaRESUMEN
The aim of this study was to evaluate the influence of cervical preflaring on the choice of reciprocating file size (Reciproc system) and the difficulty in reaching the working length for instrumentation of molar root canals. A total of 352 human molars were divided into 2 groups of 176 molars each. In the no preflaring (NPF) group, no cervical preflaring was performed. A reciprocating file (R25, R40, or R50) was selected, and instrumentation was performed in accordance with the manufacturer's recommendations. In the preflaring (PF) group, a file was selected, and cervical preflaring was performed with the use of No. 30/.10 or No. 25/.08 orifice shaper instruments. The clinician then selected a new reciprocating file or used the originally selected file to perform the instrumentation as done in the NPF group. Any changes in choice of file after preflaring were documented for the PF group, and the number of insertions required to reach the working length was recorded for both groups. After preflaring, the selected file was changed from R25 to R40 in 20.08% of canals, from R25 to R50 in 0.40% of canals, and from R40 to R50 in 42.14% of canals. After preflaring, 2.88% of the canals with an initial selection of an R50 file required an instrument with a larger diameter for effective preparation. There was a statistically significant difference between the groups for all file size changes (P < 0.001; χ² test). The mean numbers of instrument insertions needed for the NPF and PF groups, respectively, were 4.09 and 2.42 (R25); 3.49 and 2.31 (R40); and 2.70 and 1.81 (R50). There was a statistically significant difference between the groups for all file sizes (P < 0.001; Kruskal-Wallis test). Under the conditions of this study, preflaring enabled a more suitable selection of reciprocating instrument, which, in turn, allowed for fewer insertions of the file up to the working length.
Asunto(s)
Preparación del Conducto Radicular , Ápice del Diente , Humanos , Raíz del Diente , Diente Molar/cirugía , Cavidad Pulpar , Diseño de EquipoRESUMEN
Medication-related osteonecrosis of the jaw (MRONJ) is an uncommon and severe condition in patients who are receiving treatment with antiresorptive and/or antiangiogenic drugs, which are frequently used to treat or prevent cancer metastases. The treatment of MRONJ is challenging because the choice of a specific dental treatment depends on several factors, including the systemic condition of the patient, type and dosage of medications, and clinical and radiographic characteristics of the dental lesions. This case report describes the conservative endodontic treatment of an odontogenic infection in a patient at risk of developing MRONJ owing to bisphosphonate treatment. Endodontic retreatment was performed to control the odontogenic infection and avoid tooth extraction. Certain factors favor the use of a conservative approach, such as a localized and small infection, the absence of systemic factors (such as metabolic disorders or medications) that can impair bone healing, and good oral hygiene.
Asunto(s)
Osteonecrosis de los Maxilares Asociada a Difosfonatos , Conservadores de la Densidad Ósea , Humanos , Conservadores de la Densidad Ósea/efectos adversos , Osteonecrosis de los Maxilares Asociada a Difosfonatos/terapia , Osteonecrosis de los Maxilares Asociada a Difosfonatos/prevención & control , Difosfonatos/efectos adversos , Atención Odontológica/efectos adversos , Extracción Dental/efectos adversosRESUMEN
AIM: The addition of etidronic acid (HEDP) to sodium hypochlorite (NaOCl) could increase the antibiofilm potency of the irrigant, whilst maintaining the benefits of continuous chelation. Studies conducted so far have shown that mixing HEDP with NaOCl solutions of relatively low concentration does not compromise the antibiofilm efficacy of the irrigant. However, the working lifespan of NaOCl may decrease resulting in a reduction of its antibiofilm efficacy over time (efficiency). In this regard, continuous irrigant replenishment needs to be examined. This study investigated the response of a dual-species biofilm when challenged with 2% and 5% NaOCl mixed with HEDP for a prolonged timespan and under steady laminar flow. METHODOLOGY: Dual-species biofilms comprised of Streptococcus oralis J22 and Actinomyces naeslundii T14V-J1 were grown on human dentine discs in a constant depth film fermenter (CDFF) for 96 h. Biofilms were treated with 2% and 5% NaOCl, alone or mixed with HEDP. Irrigants were applied under steady laminar flow for 8 min. Biofilm response was evaluated by means of optical coherence tomography (OCT). Biofilm removal, biofilm disruption, rate of biofilm loss and disruption as well as bubble formation were assessed. One-way anova, Wilcoxon's signed-rank test and Kruskal-Wallis H test were performed for statistical analysis of the data. The level of significance was set at a ≤.05. RESULTS: Increasing NaOCl concentration resulted in increased biofilm removal and disruption, higher rate of biofilm loss and disruption and increased bubble formation. Mixing HEDP with NaOCl caused a delay in the antibiofilm action of the latter, without compromising its antibiofilm efficacy. CONCLUSIONS: NaOCl concentration dictates the biofilm response irrespective of the presence of HEDP. The addition of HEDP resulted in a delay in the antibiofilm action of NaOCl. This delay affects the efficiency, but not the efficacy of the irrigant over time.
Asunto(s)
Ácido Etidrónico , Irrigantes del Conducto Radicular , Biopelículas , Humanos , Irrigantes del Conducto Radicular/farmacología , Hipoclorito de Sodio/farmacología , Tomografía de Coherencia ÓpticaRESUMEN
OBJECTIVE: Confocal laser scanning microscopy (CLSM) was used to investigate the penetration of endodontic sealers into the dentinal tubules after retreatment using two different obturation techniques. MATERIALS AND METHODS: Thirty mandibular premolars were prepared up to instrument F3 (ProTaper Universal, Dentsply) and filled with Endofill using the single cone technique. The canals were retreated using Mtwo instruments. Reobturation was performed with the Bio-C sealer mixed with a fluorophore dye (Fluo-3) using either the lateral condensation technique (group LC) or the single cone technique (group SC) (n = 15). Teeth were sectioned 2, 4, and 6 mm from the apex and analyzed with CLSM to assess the penetration of the sealer into the canal perimeter and the maximum depth of penetration of the sealer into the dentinal tubules. Data were analyzed using ANOVA and the Student-t and Holm-Sidak tests. RESULTS: In the apical segment, the penetrated perimeter was significantly higher in the LC group than in the SC group (p < 0.05); no significant difference was found in the middle and cervical segments (p > 0.05). In terms of penetration depth, no significant differences were found for any of the segments studied (p > 0.05). CONCLUSION: The LC technique promoted a higher percentage of canal circumference penetrated by the sealer than the SC technique in the apical segment after endodontic retreatment. CLINICAL RELEVANCE: CLSM demonstrated that the LC technique promoted a higher percentage of canal perimeter penetrated by the Bio-C sealer than the SC technique in the apical segment of mandibular premolars after retreatment.
Asunto(s)
Materiales de Obturación del Conducto Radicular , Obturación del Conducto Radicular , Humanos , Obturación del Conducto Radicular/métodos , Diente Premolar , Materiales de Obturación del Conducto Radicular/uso terapéutico , Silicatos/uso terapéutico , Retratamiento , Microscopía Confocal , Resinas Epoxi/uso terapéutico , Preparación del Conducto RadicularRESUMEN
OBJECTIVE: This study aimed to evaluate the accuracy of the auto apical function in the maintenance of the apical limit of instrumentation during glide path procedures when associated to OGP kinematics of Tri Auto ZX2, compared to the continuous rotation of the same motor, as well as Root ZX II and VDW Gold. MATERIALS AND METHODS: Forty-eight extracted human mandibular single-rooted premolars were selected. After endodontic access, cervical pre-flaring was performed using size 30, 0.10 taper rotary instruments, and the apical foramen size was standardized to 200 µm. Teeth were randomly divided into four groups (n = 12) according to the device and kinematics. For all the groups, the Auto Apical Stop function (AAS) was set to the 0.0 mark. Glide path instruments size 25, .01 taper were activated inside the canals until the apical limit was reached. Then, the files were fixed with cyanoacrylate to the teeth and decoupled from the equipment. Data were statistically analyzed in GraphPad Prism 6.0 software with the significance set at 5% (Kruskal-Wallis tests). RESULTS: There was no difference in the mean deviation between the groups. No significant difference was found among the groups when the distributions and percentages of differences between the file tip and the apical foramen were compared (P > 0.05). CONCLUSION: The use of auto apical function at the 0.0 mark of all tested devices provided an adequate control of the apical limit during glide path preparation. Foramen locating accuracy of Tri Auto ZX2 in OGP kinematics was similar to those of Tri Auto ZX2, Root ZX II, and VDW Gold in continuous kinematics. CLINICAL RELEVANCE: Clinical strategies in canal negotiation and glide path as OGP motion associated to electronic foramen locators could reduce iatrogenic risk of deviation and file fractures and create an easier initial preparation to facilitate endodontic procedures.
Asunto(s)
Cavidad Pulpar , Preparación del Conducto Radicular , Fenómenos Biomecánicos , Electrónica , Humanos , Odontometría , Ápice del DienteRESUMEN
OBJECTIVES: The objective of the present work was to evaluate the ultrasonic agitation, time and vehicle (propylene glycol or distilled water) on the antimicrobial potential and penetrability of calcium hydroxide pastes on infected dentin by means of Confocal Laser Scanning Microscopy (CLSM) and microbiological culture (MC). MATERIALS AND METHODS: Dentin specimens were infected with Enterococcus faecalis using a new contamination protocol of 5 days. The specimens were divided into eight groups and dressed with the pastes for 7 or 15 days: G1) calcium hydroxide (CH) + propylene glycol (prop)/7 days (d), G2) CH + prop/7d + ultrasonic agitation (U), G3) CH + distilled water (dw)/7d, G4) CH + dw/7d + U, G5) CH + prop/15d, G6) CH + prop/15d + U, G7) CH + dw/15d, G8) CH + dw/15d + U. The ultrasonic activation was made for 1 min in both directions with a plain point insert. After medications removal, the images obtained by CLSM showed the viable (green) and dead (red) bacteria with Live and Dead dye. By the MC, the dentinal wall debris obtained by burs were collected for colony counts. For the penetration test, the Rodamine B dye was added to the CH pastes and analyzed by CLSM. RESULTS: The 7 and 15-days CH + prop+U pastes performed better antimicrobial efficacy, followed by the CH + dw+U/15d paste. CONCLUSIONS: All pastes demonstrated better penetration and antimicrobial activity against E. faecalis when agitated with ultrasound, even in periods of up to seven days. The propylene glycol vehicle showed better results. CLINICAL RELEVANCE: Agitation of the dressing that remains for less time inside the root canal can optimize the decontamination of endodontic treatment.
Asunto(s)
Hidróxido de Calcio/farmacología , Diente , Terapia por Ultrasonido/efectos adversos , Animales , Antiinfecciosos/farmacología , Hidróxido de Calcio/farmacocinética , Bovinos , Cementos Dentales/farmacocinética , Cementos Dentales/farmacología , Cavidad Pulpar/efectos de los fármacos , Cavidad Pulpar/microbiología , Enterococcus faecalis/efectos de los fármacos , Enterococcus faecalis/crecimiento & desarrollo , Pruebas de Sensibilidad Microbiana , Materiales de Obturación del Conducto Radicular/farmacocinética , Materiales de Obturación del Conducto Radicular/farmacología , Irrigantes del Conducto Radicular/farmacocinética , Factores de Tiempo , Diente/efectos de los fármacos , Diente/metabolismo , Diente/microbiología , Permeabilidad Dental/efectos de los fármacos , Ultrasonido/métodosRESUMEN
This study aimed to investigate the antimicrobial and biological properties of Ambroxol associated with glycerin (GLI), propylene glycol (PG), and polyethylene glycol (PEG) as a possible vehicle for an experimental tricalcium silicate sealer, with the intention of developing a new biomaterial. Mouse undifferentiated dental pulp cells (OD-21) were cultured, and the effects of different association on cell proliferation and inflammatory cytokine production were investigated. Antimicrobial adhesion of Enterococcus faecalis to setting sealers at 2 h was evaluated. Polyethylene tubes containing experimental sealers and empty tubes were implanted into dorsal connective tissues of 12 male 3- to 4-months-old Wistar rats (250-280 g). After 7 and 30 days, the tubes were removed and processed for histological and immunohistochemical analyses. ANOVA followed by Bonferroni correction and ANOVA followed by Tukey test was used for parametric data and Kruskal-Wallis followed by Dunn for nonparametric (p < 0.05). Cell proliferation was dose-dependent, since all association were cytotoxic at higher concentrations; however, Ambroxol-PEG showed significantly higher cytotoxicity than other association (p < 0.05). In addition, irrespective of the association, no cytokine production was observed in vitro. Ambroxol-GLI reduced bacterial viability, whereas Ambroxol-PEG increased (p < 0.05). Histological examination showed no significant difference in the inflammatory response (p > 0.05) and mineralization ability in all association. Additionally, IL-1ß and TNF-α were upregulated on Ambroxol-PEG in relation to Control at 07 days (p < 0.05). Ambroxol-GLI was the best vehicle for experimental tricalcium silicate sealer, as it promoted an increase in antimicrobial activity without altering the inflammatory response or mineralization ability.
Asunto(s)
Ambroxol/farmacología , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Compuestos de Calcio/química , Silicatos/química , Ambroxol/química , Animales , Antibacterianos/química , Antibacterianos/farmacología , Adhesión Bacteriana/efectos de los fármacos , Proliferación Celular , Células Cultivadas , Citocinas/genética , Citocinas/metabolismo , Pulpa Dental/citología , Femenino , Regulación de la Expresión Génica/efectos de los fármacos , Glicerol/química , Masculino , Ensayo de Materiales , Ratones , Polietilenglicoles , Propilenglicol/química , Ratas , ViscosidadRESUMEN
OBJECTIVES: To evaluate the marginal adaptation and internal space of crowns produced by 4 CAD/CAM systems using microcomputed tomography (µCT) and replica technique (RT). MATERIALS AND METHODS: Monolithic lithium disilicate crowns were milled (Ceramill, Cerec, EDG, and Zirkonzahn) (n = 10). The cement film obtained with low viscosity silicone was scanned by the µCT system and captured by a stereomicroscope, according to RT. Two-way ANOVA followed by Tukey's test were used for statistical analysis (α = 0.05). A uniformity index (UI) was idealized to describe the distribution of crowns' internal space and submitted to the Kruskal-Wallis and Tukey's test (α = 0.05). The correlation between µCT and RT was performed by Pearson's Correlation Coeficient (α = 0.05). RESULTS: Marginal adaptation and internal space were statistically significant different between the experimental groups for the µCT and RT (p < 0.05). The medians of the 4 systems tested were within clinically acceptable range and the mean (± SD) highest marginal discrepancy was recorded in the Ceramill group at 133.0 ± 71.5 µm (µCT) and 90.6 ± 38.5 µm (RT). For internal fit, the UI disclosed a better distribution of the internal space for the Zirkonzahn group (p < 0.001). There was a strong correlation between the methods (p = 0.01 and r = 0.69). CLINICAL RELEVANCE: Because of the variability of the CAD/CAM systems available, evaluating their accuracy is of clinical interest. The 4 systems are capable to produce restorations adaptated within clinically appropriate levels. The µCT and RT are efficient adaptation methodologies.
Asunto(s)
Adaptación Marginal Dental , Diseño de Prótesis Dental , Cerámica , Diseño Asistido por Computadora , Coronas , Porcelana Dental , Microtomografía por Rayos XRESUMEN
Autologous bone grafts, used mainly in extensive bone loss, are considered the gold standard treatment in regenerative medicine, but still have limitations mainly in relation to the amount of bone available, donor area, morbidity and creation of additional surgical area. This fact encourages tissue engineering in relation to the need to develop new biomaterials, from sources other than the individual himself. Therefore, the present study aimed to investigate the effects of an elastin and collagen matrix on the bone repair process in critical size defects in rat calvaria. The animals (Wistar rats, n = 30) were submitted to a surgical procedure to create the bone defect and were divided into three groups: Control Group (CG, n = 10), defects filled with blood clot; E24/37 Group (E24/37, n = 10), defects filled with bovine elastin matrix hydrolyzed for 24 h at 37 °C and C24/25 Group (C24/25, n = 10), defects filled with porcine collagen matrix hydrolyzed for 24 h at 25 °C. Macroscopic and radiographic analyses demonstrated the absence of inflammatory signs and infection. Microtomographical 2D and 3D images showed centripetal bone growth and restricted margins of the bone defect. Histologically, the images confirmed the pattern of bone deposition at the margins of the remaining bone and without complete closure by bone tissue. In the morphometric analysis, the groups E24/37 and C24/25 (13.68 ± 1.44; 53.20 ± 4.47, respectively) showed statistically significant differences in relation to the CG (5.86 ± 2.87). It was concluded that the matrices used as scaffolds are biocompatible and increase the formation of new bone in a critical size defect, with greater formation in the polymer derived from the intestinal serous layer of porcine origin (C24/25).
Asunto(s)
Biopolímeros/química , Regeneración Ósea/fisiología , Andamios del Tejido/química , Animales , Materiales Biocompatibles/química , Birrefringencia , Matriz Ósea/química , Matriz Ósea/fisiología , Remodelación Ósea/fisiología , Sustitutos de Huesos/química , Calcificación Fisiológica/fisiología , Bovinos , Colágeno/química , Colágeno/metabolismo , Elastina/química , Elastina/metabolismo , Imagenología Tridimensional , Masculino , Ensayo de Materiales , Ratas , Ratas Wistar , Cráneo/diagnóstico por imagen , Cráneo/lesiones , Cráneo/fisiología , Porcinos , Ingeniería de Tejidos/métodos , Microtomografía por Rayos XRESUMEN
OBJECTIVES: Evaluate the cytotoxicity and biocompatibility of calcium hydroxide paste [Ca (OH)2] associated with 5% diclofenac sodium, ibuprofen, or amoxicillin. MATERIALS AND METHODS: Pre-osteoblast-like cells were cultivated and the MTT test was used to determine the cytotoxicity of the paste extracts after time intervals of 24, 48, 72 h, and 7 days. Tubes containing Ca (OH)2 pastes associated with the drugs and empty tubes were implanted in subcutaneous tissue of 30 rats. After 7 and 30 days, the specimens were removed and submitted to histological analysis. The data obtained were submitted to Kruskal-Wallis and Dunn tests (p ≤ 0.05). RESULTS: All the Ca (OH)2 pastes promoted cell viability after all periods. At 7 days, there was greater inflammatory tissue reaction adjacent to the implants. At 30 days, there was a significant reduction in the number of inflammatory cells, and increase in fibroblasts in all groups. In this period, a lower number of inflammatory cells and a higher number of fibroblasts were observed in the capsules adjacent to the association with diclofenac, when compared with the other mixtures (p ≤ 0.05); the capsule thickness was greater at 7 days than at 30 days. CONCLUSIONS: The Ca (OH)2 pastes associated with the drugs were not cytotoxic and presented biocompatibility after implantation in rat subcutaneous tissues. CLINICAL RELEVANCE: Ca (OH)2 pastes with anti-inflammatory or antibiotic may be clinical alternatives as intracanal medication to reduce resistant microorganisms in root canal system.
Asunto(s)
Antibacterianos/farmacología , Antiinflamatorios no Esteroideos/farmacología , Animales , Hidróxido de Calcio , Diclofenaco , Ratas , Materiales de Obturación del Conducto Radicular , Irrigantes del Conducto RadicularRESUMEN
BACKGROUND: Evaluate the fracture resistance of endodontically treated teeth after cervical preflaring and root canal preparation and to assess the volume of the root canal and the amount of remaining root dentin before and after cervical preflaring. METHODS: Forty-four mandibular incisors were selected using micro-CT scanning and distributed into 4 groups (n = 11) according to the instrument used for cervical preflaring: control group - no cervical preflaring; Gates Glidden - burs size #2 and #3; WXN - 25.07 Navigator instrument; and Easy - 25.08 ProDesign S instrument. Coronal opening was performed, and the canals were prepared with Wave One Gold Primary and filled with an epoxy-resin based sealer and gutta-percha cones. Micro-CT scans were performed before and after root canal instrumentation. All images were reconstructed and assessed for the thickness of mesial and distal root dentin at 3 mm and 5 mm from the cement -enamel junction and for the volume of cervical portion of the canal after preparation. Fracture resistance test was performed applying compressive loads at a crosshead speed of 0.5 mm/min, applied on the palatal aspect of specimens at 135° along the long axis of the tooth. The data were analyzed using ANOVA and Tukey's test (P = .05). RESULTS: Cervical preflaring and canal preparation reduced the dentin thickness (P < .05) and increased the canal volume (P < .05) in all groups at 3 mm an 5 mm. Cervical preflaring with Gates Gliden burs reduced the fracture resistance of endodontically treated teeth (P < .05). CONCLUSIONS: All instruments reduced the dentin thickness and increased the canal volume in the cervical at 3 mm and 5 mm. Gates Glidden reduced fracture resistance of mandibular incisors submitted to cervical preflaring, whereas NiTi instruments did not. CLINICAL RELEVANCE: Cervical preflaring assumes particular importance previously to the root canal preparation because it minimizes the occurrence of operative accidents, and permits more accurate determination of working length and the apical diameter.
Asunto(s)
Cavidad Pulpar/patología , Gutapercha/uso terapéutico , Materiales de Obturación del Conducto Radicular/uso terapéutico , Preparación del Conducto Radicular/instrumentación , Diente no Vital/fisiopatología , Resinas Epoxi/uso terapéutico , Humanos , Preparación del Conducto Radicular/métodos , Fracturas de los Dientes , Diente no Vital/diagnóstico por imagenRESUMEN
OBJECTIVES: Addition of aluminum fluoride (AlF3) to MTA was tested to inhibit dental discoloration. MATERIALS AND METHODS: MTA Angelus with 0, 5, 15, and 45% AlF3 were tested. The set cements were characterized using scanning electron microscopy, energy-dispersive spectroscopy, and X-ray diffraction. Radiopacity and setting time were analyzed according to ANSI/ADA 57 and ASTM C266-08. Volume change was evaluated using volumetric micro-CT analysis. The pH and calcium ion release were assessed after 3 and 24 h and 28 days. Dental discoloration in contact with the cements was assessed after 24 h and 28 and 90 days of contact with bovine and human dentine. Tissue reaction to subcutaneous implantation in rats was examined after 30 and 60 days. RESULTS: AlF3 altered the microstructure of MTA. The addition of 5% AlF3 did not significantly alter the radiopacity, setting time, and volume change (p > 0.05). pH and calcium ion release significantly increased with addition of AlF3 (p > 0.05). All the tested proportions of AlF3 prevented the dental darkening verified for MTA Angelus in bovine and human teeth. AlF3 did not interfere in inflammatory response of MTA in all periods of analysis; otherwise, lower amounts showed less intense inflammatory infiltrate. CLINICAL RELEVANCE: AlF3 prevents destabilization of bismuth oxide and consequent tooth darkening, frequently verified in clinical practice when using white MTA. CONCLUSIONS: The use of 5% of AlF3 in combination to MTA resulted in a cement that did not result in dental discoloration and did not affect significantly physical, chemical, and biological properties.
Asunto(s)
Compuestos de Aluminio/química , Bismuto/química , Fluoruros/química , Óxidos/química , Silicatos/química , Animales , Bovinos , Esmalte Dental/efectos de los fármacos , Combinación de Medicamentos , Humanos , Concentración de Iones de Hidrógeno , Técnicas In Vitro , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Espectrometría por Rayos X , Propiedades de Superficie , Difracción de Rayos XRESUMEN
INTRODUCTION: To compare, by Micro-CT and confocal laser scanning microscopy (CLSM), the ability of the Wave One Gold and Wave One systems to remove filling material from mesial canals of mandibular molars, effective time spent; quantity of extruded material, and percentage of sealer in the dentinal tubules after retreatment and re-obturation procedures. MATERIALS AND METHODS: Ten first mandibular molars (n = 20 mesial canals) were prepared and filled with gutta-percha and Endofill sealer mixed with Rhodamine B dye using the single cone technique. After 7 days, the canals were scanned using a high-definition micro-computer tomography with 19-mm voxel size and divided into two groups (n = 10) according to the system used in retreatment: group 1, Wave One (WO), and group 2, Wave One Gold (WG). After removing filling material with the primary file of each system, the WO 40/.08 and WG 35/.06 files were used. After using each file, a new scanning was performed and the residual filling material and extruded filling material were measured. The effective time spent to remove the canal filling was measured after each instrument. After retreatment, the teeth were re-obturated with gutta-percha and AH Plus sealer mixed with fluorescein dye using the single-cone technique. The roots were sectioned at 2, 4 and 6 mm and analysed by CLSM to measure the percentage of remaining sealer and the sealer of the new root canal filling. The data were statistically compared (P < 0.05). RESULTS: Both systems presented a similar volume of filling material remaining in the canals after the use of the two instruments, similar residual and new material in the dentinal tubules, and similar extrusion of material (P > 0.05). When using WO 25, the operator spent significantly less effective time than when using WG 25 (P < 0.05); however, use of WG 35 and WO 40 required a similar time to remove filling material from the canals (P > 0.05). CONCLUSIONS: Neither of the two systems removed all the filling material. The WG system presented similar ability in removing filling and extruded material in comparison with WO system. The effective time spent was shorter for WO 25 than for WG 25. CLINICAL RELEVANCE: Wave One Gold can be an alternative to perform retreatment considering that in comparison with Wave One, there was no difference in filling material removal capacity and extruded materials. There was only difference in the effective time spent, in which the operator spent more time with WG 25 than with WO 25.
Asunto(s)
Microscopía Confocal , Diente Molar/diagnóstico por imagen , Diente Molar/cirugía , Obturación del Conducto Radicular/métodos , Microtomografía por Rayos X , Instrumentos Dentales , Gutapercha/química , Humanos , Técnicas In Vitro , Mandíbula , Retratamiento , Materiales de Obturación del Conducto Radicular/químicaRESUMEN
OBJECTIVES: The aim of this study was to evaluate the impact of body temperature on the cyclic fatigue resistance of different NiTi alloys used for the manufacturing of Reciproc Blue R25 (RB 25.08; VDW, Munich, Germany), X1 Blue File 25 (X1 25.06; MK Life Medical and Dental Products, Porto Alegre, Brazil) and WaveOne Gold Primary (WOG 25.07; Dentsply Maillefer, Ballaigues, Switzerland). MATERIALS AND METHODS: Sixty instruments of the RB 25.08, X1 25.06 and WOG 25.07 systems were used (n = 20). Cyclic fatigue tests were performed at room temperature (20° ± 1 °C) and at body temperature (37° ± 1 °C). The instruments were reciprocated until fracture occurred in an artificial stainless steel canal with a 60° angle and a 5-mm radius of curvature. The time to fracture (TTF) was recorded. Also, the number of cycles to fracture (NCF) was calculated. Data were analysed using one-way ANOVA and Tukey's tests for inter-group comparison at both temperatures and for the reduction of cyclic fatigue at body temperature. For intra-group comparison at the different temperatures, the unpaired t test was used. RESULTS: The cyclic fatigue test at 20 °C showed that RB 25.08 and X1 25.06 presented significantly higher TTF and NCF than WOG 25.07 (P < 0.05). At 37 °C, all groups presented significant reduction of TTF and NCF (P < 0.05). RB 25.08 presented significant higher TTF than WOG 25.07 (P < 0.05). Regarding the NCF, there was no significant difference among the groups (P > 0.05). The WOG 25.07 presented the lowest percentage reduction of cyclic fatigue (P < 0.05). CONCLUSION: The body temperature treatment caused a marked reduction of the cyclic fatigue resistance for all reciprocating instruments tested. The RB 25.08 and X1 25.06 systems presented similar results at both temperatures tested. However, WOG 25.07 presented the lowest percentage reduction in fatigue resistance at body temperature. CLINICAL RELEVANCE: The cyclic fatigue resistance of NiTi reciprocating instruments has been evaluated at room temperature. However, the fatigue resistance significantly decreases upon exposure to body temperature, which could affect the mechanical behaviour of the NiTi instruments during root canal preparation.