A comparison of several separation processes for eggshell membrane powder as a natural biomaterial for skin regeneration.

BACKGROUND: Numerous studies have focused on skin damage, the most prevalent physical injury, aiming to improve wound healing. The exploration of biomaterials, specifically eggshell membranes (ESMs), is undertaken to accelerate the recovery of skin injuries. The membrane must be separated from the shell to make this biomaterial usable. Hence, this investigation aimed to identify more about the methods for membrane isolation and determine the most efficient one for usage as a biomaterial. METHODS AND MATERIALS: For this purpose, ESM was removed from eggs using different protocols (with sodium carbonate, acetic acid, HCl, calcium carbonate, and using forceps for separation). Consequently, we have examined the membranes' mechanical and morphological qualities. RESULTS: According to the analysis of microscopic surface morphology, the membranes have appropriate porosity. MTT assay also revealed that the membranes have no cytotoxic effect on 3T3 cells. The results indicated that the ESM had acquired acceptable coagulation and was compatible with blood. Based on the obtained results, Provacol 4 (0.5-mol HCl and neutralized with 0.1-mol NaOH) was better than other methods of extraction and eggshell separation because it was more cell-compatible and more compatible with blood. CONCLUSION: This study demonstrates that ESMs can be used as a suitable biomaterial in medical applications.

Hydrogel-Based Skin Regeneration.

The skin is subject to damage from the surrounding environment. The repair of skin wounds can be very challenging due to several factors such as severe injuries, concomitant infections, or comorbidities such as diabetes. Different drugs and wound dressings have been used to treat skin wounds. Tissue engineering, a novel therapeutic approach, revolutionized the treatment and regeneration of challenging tissue damage. This field includes the use of synthetic and natural biomaterials that support the growth of tissues or organs outside the body. Accordingly, the demand for polymer-based therapeutic strategies for skin tissue defects is significantly increasing. Among the various 3D scaffolds used in tissue engineering, hydrogel scaffolds have gained special significance due to their unique properties such as natural mimicry of the extracellular matrix (ECM), moisture retention, porosity, biocompatibility, biodegradability, and biocompatibility properties. First, this article delineates the process of wound healing and conventional methods of treating wounds. It then presents an examination of the structure and manufacturing methods of hydrogels, followed by an analysis of their crucial characteristics in healing skin wounds and the most recent advancements in using hydrogel dressings for this purpose. Finally, it discusses the potential future advancements in hydrogel materials within the realm of wound healing.

In praise of povidone-iodine application in ophthalmology.

Polyvinyl pyrrolidone or povidone-iodine (PVP-I) is a water-soluble complex formed by the combination of iodine and a water-soluble polymer, polyvinyl pyrrolidone. This complex exerts bactericidal, fungicidal, and virucidal action by gradually releasing free iodine at the site of application to react with pathogens. In ophthalmology, PVP-I is used as a disinfectant and antiseptic agent for preoperative preparation of the skin and mucous membranes and for treating contaminated wounds. PVP-I has been shown to reduce effectively the risk of endophthalmitis in various ocular procedures, including cataract surgery and intravitreal injections; however, it has also been used in the treatment of conjunctivitis, keratitis, and endophthalmitis, with promising results especially in low-resource situations. PVP-I has been associated with complications such as postoperative eye pain, persistent corneal epithelial defects, ocular inflammation, and an attendant risk of keratitis. In cases of poor PVP-I tolerance, applying PVP-I at lower concentrations or using alternative antiseptics such as chlorhexidine should be considered. We provide an update on the efficacy of PVP-I in the prophylaxis and treatment of conjunctivitis, keratitis, and endophthalmitis and a comprehensive analysis of the current literature regarding the use of PVP-I in the management of these ocular conditions. Also, PVP-I-related adverse effects and toxicities and its alternatives are discussed. The goal is to present a thorough evaluation of the available evidence and to offer practical recommendations for clinicians regarding the therapeutic usage of PVP-I in ophthalmology.

Application of biomaterials and nanotechnology in corneal tissue engineering.

Corneal diseases are among the most common causes of blindness worldwide. Regardless of the etiology, corneal opacity- or globe integrity-threatening conditions may necessitate corneal replacement procedures. Several procedure types are currently available to address these issues, based on the complexity and extent of injury. Corneal allograft or keratoplasty is considered to be first-line treatment in many cases. However, a significant proportion of the world's population are reported to have no access to this option due to limitations in donor preparation. Thus, providing an appropriate, safe, and efficient synthetic implant (e.g., artificial cornea) may revolutionize this field. Nanotechnology, with its potential applications, has garnered a lot of recent attention in this area, however, there is seemingly a long way to go. This narrative review provides a brief overview of the therapeutic interventions for corneal pathologies, followed by a summary of current biomaterials used in corneal regeneration and a discussion of the nanotechnologies that can aid in the production of superior implants.

Effect of Increasing Povidone-Iodine Exposure on Corneal Epithelium and Impact on Donor Rim Cultures.

PURPOSE: The purpose of this study was to assess the effect of a second povidone-iodine (PVP-I) application at the time of donor tissue recovery on overall tissue quality and to analyze the rate of positive fungal and bacterial rim cultures before and after implementing increased PVP-I exposure. METHODS: The left cornea was recovered after a single application of PVP-I, while the right cornea was recovered after double PVP-I application in research-consented donors. The epithelial cell death rate was estimated using viability assay in corneal whole mounts under 10× objective (n = 5). Clinical characteristics of epithelium, stroma, and endothelium; positive rim culture rate; and incidences of infectious postoperative adverse reactions were compared for a period of 14 months before and after implementation of increased PVP-I protocol. RESULTS: The average epithelial cell death rate was unaltered between single and double PVP-I exposure groups. We observed a modest 10% increase in the number of tissues with mild edema after implementation of increased PVP-I exposure. Nonetheless, the percentage of tissues with moderate or severe edema was unaltered. The average positive rim culture rate decreased from 1.17% to 0.88% (P = 0.075) after implementation of the double PVP-I soak procedure. There has been only one report of infectious postoperative adverse reactions since this procedure change. By contrast, there were 5 reports for a period of 14 months before implementation of this protocol. CONCLUSIONS: These results indicate that new donor preparation methods with an additional 5 minutes of PVP-I exposure do not affect tissue quality, reduce positive rim cultures, and lead to lower incidence of postoperative infection.

Bioengineering Approaches for Corneal Regenerative Medicine.

BACKGROUND: Since the cornea is responsible for transmitting and focusing light into the eye, injury or pathology affecting any layer of the cornea can cause a detrimental effect on visual acuity. Aging is also a reason for corneal degeneration. Depending on the level of the injury, conservative therapies and donor tissue transplantation are the most common treatments for corneal diseases. Not only is there a lack of donor tissue and risk of infection/rejection, but the inherent ability of corneal cells and layers to regenerate has led to research in regenerative approaches and treatments. METHODS: In this review, we first discussed the anatomy of the cornea and the required properties for reconstructing layers of the cornea. Regenerative approaches are divided into two main categories; using direct cell/growth factor delivery or using scaffold-based cell delivery. It is expected delivered cells migrate and integrate into the host tissue and restore its structure and function to restore vision. Growth factor delivery also has shown promising results for corneal surface regeneration. Scaffold-based approaches are categorized based on the type of scaffold, since it has a significant impact on the efficiency of regeneration, into the hydrogel and non-hydrogel based scaffolds. Various types of cells, biomaterials, and techniques are well covered. RESULTS: The most important characteristics to be considered for biomaterials in corneal regeneration are suitable mechanical properties, biocompatibility, biodegradability, and transparency. Moreover, a curved shape structure and spatial arrangement of the fibrils have been shown to mimic the corneal extracellular matrix for cells and enhance cell differentiation. CONCLUSION: Tissue engineering and regenerative medicine approaches showed to have promising outcomes for corneal regeneration. However, besides proper mechanical and optical properties, other factors such as appropriate sterilization method, storage, shelf life and etc. should be taken into account in order to develop an engineered cornea for clinical trials.

Conjunctival limbal autograft and allograft transplantation using fibrin glue.

BACKGROUND AND OBJECTIVE: Conjunctival limbal autograft is the surgical treatment of choice for visually significant unilateral limbal stem cell deficiency. The use of fibrin glue, which has been reported extensively in pterygium and other conjunctival surgeries, has not been fully described in limbal stem cell transplantation. PATIENTS AND METHODS: The authors reviewed 3 cases of conjunctival limbal autograft and 1 of living related conjunctival limbal allograft using only fibrin glue to secure the graft. Main outcome measures included ocular surface stability, visual acuity, and postoperative complications. RESULTS: At most recent follow-up, all 4 patients (100%) maintained a stable ocular surface. Mean epithelial healing time was 10 days. Mean visual acuity improved from 20/400 to 20/53. All grafts were successful with no postoperative dislocations or displacements. CONCLUSION: The findings demonstrate that fibrin glue can be used safely and effectively to secure conjunctival limbal grafts in limbal stem cell deficiency. This novel approach has the potential to decrease operative time, increase ease of technique, and improve patient comfort postoperatively.

Limbal allograft transplantation using fibrin glue.

Limbal transplantation is now widely accepted as the treatment of advanced limbal stem cell deficiency. Herein, we describe a technique for harvesting thin limbal grafts from cadaveric corneoscleral rims and a sutureless method to secure the grafts to the recipient eye using fibrin glue. We report the results of fibrin glue-assisted keratolimbal allograft in 19 eyes of 16 patients, with the outcome measures being ocular surface stability, visual acuity, and postoperative complications. The results indicate that limbal allograft transplantation can be performed safely and successfully using only fibrin glue to secure the grafts. This can potentially improve surgical efficiency and patient comfort postoperatively.