MRI compatibility of orthodontic brackets and wires: systematic review article.

BACKGROUND: Before the magnetic resonance imaging (MRI) examination fixed orthodontic devices, such as brackets and wires, cause challenges not only for the orthodontist but also for the radiologist. Essentially, the MRI-safe scan of the fixed orthodontic tools requires a proper guideline in clinical practice. Therefore, this systematic review aimed to examine all aspects of MRI-safe scan, including artifact, thermal, and debonding effects, to identify any existing gaps in knowledge in this regard and develop an evidence-based protocol. METHODS: The Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) statement was used in this study. The clinical question in "PIO" format was: "Does MRI examination influence the temperature of the orthodontic devices, the size of artifacts, and the debonding force in patients who have fixed orthodontic bracket and/or wire?" The search process was carried out in PubMed, PubMed Central, Scopus, and Google Scholar databases. The search resulted in 1310 articles. After selection according to the eligibility criteria, 18 studies were analyzed by two reviewers. The risk of bias was determined using the Quality In Prognosis Studies tool. RESULTS: Out of the eligible 18 studies, 10 articles examined the heating effect, 6 were about the debonding effect, and 11 measured the size of artifact regarding brackets and wires. Considering the quality assessment, the overall levels of evidence were high and medium. The published studies showed that heating and debonding effects during MRI exposure were not hazardous for patients. As some wires revealed higher temperature changes, it is suggested to remove the wire or insert a spacer between the appliances and the oral mucosa. Based on the material, ceramic and plastic brackets caused no relevant artifact and were MRI-safe. Stainless steel brackets and wires resulted in susceptibility artifacts in the orofacial region and could cause distortion in the frontal lobe, orbits, and pituitary gland. The retainer wires showed no relevant artifact. CONCLUSIONS: In conclusion, the thermal and debonding effects of the fixed orthodontic brackets and wires were irrelevant or resoluble; however, the size of the artifacts was clinically relevant and determined most significantly the feasibility of fixed brackets and wires in MRI examination.

Evaluation of the effect of vitamin D3 on mandibular condyles in an ovariectomized mouse model: a micro-CT study.

BACKGROUND: This study aimed to investigate the effect of ovariectomy and vitamin D3 on bone microstructure; this effect was examined in three regions of interest at one femoral and two mandibular sampling sites bone in an ovariectomized mouse model. METHODS: Thirty-six week-old female mice were randomly divided into three groups: 10 subjects were given oral cholecalciferol (vitamin D3) daily for 6 weeks after undergoing bilateral ovariectomy (D3 group), while 10 ovariectomized subjects (OVX) and 10 subjects who underwent a sham operation (SHAM) received peanut oil daily during the investigation. After extermination, the left hemimandible and femur were removed and scanned by micro-CT. The bone micromorphology parameters were analyzed and the BMD was calculated. RESULTS: The bone volume fraction (BV/TV) was significantly lower in the trabecular bone of the mandibular condyle in the OVX group than in the SHAM and D3 groups. Also there was a significant difference between the SHAM and D3 groups. The specific bone surface (BS/BV) was significantly higher in the OVX and D3 groups than in the SHAM group. Trabecular thickness (Tb.Th) was significantly higher in the SHAM group, and the trabecular bone pattern factor (Tb.Pf) was significantly higher in the OVX group than in the other two groups. Bone mineral density (BMD) of the femur and the mandible was significantly lower in the OVX group than in the SHAM and D3 groups. CONCLUSIONS: Our results show that ovariectomy causes a significantly weaker bone microstructure in the mandibular condyle, where the protective effect of vitamin D3 resulted in a partial resorption.

Development of a quantitative preclinical screening model for implant osseointegration in rat tail vertebra.

OBJECTIVES: Functional tooth replacement and bone regeneration are parts of the daily practice in modern dentistry, but well-reproducible and relatively inexpensive experimental models are still missing. We aimed to develop a new small animal model to monitor osseointegration utilizing the combination of multiple evaluation protocols. MATERIAL AND METHODS: After cutting the tail between the C4 and C5 vertebrae in Wistar rats, costume made, parallel walled, non-threaded implants were placed into the center of the tail parallel with its longitudinal axis using a surgical guide. Osseointegration of the titanium implants was followed between 4 and 16 weeks after surgery applying axial extraction force, and resonance frequency analysis as functional tests, and histomorphometry and micro-CT as structural evaluations. RESULTS: In functional tests, we observed that both methods are suitable for the detection of the time-dependent increase in osseointegration, but the sensitivity of the pull-out technique (an approximately five times increase with rather low standard error) was much higher than that of the resonance frequency analysis. In structural evaluations, changes in the detected bone implant contact values measured by histomorphometry (yielding 1.5 times increase, with low variations of data) were more reliable than micro-CT based evaluations to screen the developments of contact between bone and implant. CONCLUSION: Our results provide evidence that the caudal vertebrae osseointegration model is useful for the preclinical evaluation of implant integration into the bone. CLINICAL RELEVANCE: The combination of the biomechanical and structural tests offers a well-reproducible small animal system that can be suitable for studying the integration of various implant materials and surface treatments.

Difficulties in the diagnosis of periapical translucencies and in the classification of cemento-osseous dysplasia.

BACKGROUND: Cemento-osseous dysplasia is a benign fibro-osseous lesion of the tooth-bearing region of the jaws with a periodontal ligament origin. It appears predominantly in Black and Asian middle-aged females. Its importance is that it could mimic a periapical lesion in the early, translucent stage. CASE PRESENTATION: In this report a rare case of familial cemento-osseous dysplasia is presented: a 50-years old Caucasian woman with labial paraesthesia and radiological translucency around the roots of the mandibular incisors and the first molar teeth. The lesion around the first molar was diagnosed as periapical granuloma and a root canal treatment was carried out. The diagnosis of florid cemento-osseous dysplasia and the treatment plan based on two- and three-dimensional radiographic examinations were certified histologically after surgical removal of the lesion. We screened the family members - including the patient's mother, daughter and son - and identified a periapical version of cemento-osseous dysplasia in the daughter. Our case highlights the difficulties of differential diagnosis of cemento-osseous dysplasia and other periapical pathologies. The inconsistencies in the present classification of cemento-osseous dysplasia are also discussed with a proposal for a different classification based on new aspects that would be very helpful in setting up a correct treatment plan. CONCLUSION: Differentiation of endodontic and non-endodontic origin of radiolucency and distinguishing it from anatomical landmarks by appropriate clinical evaluation and using vitality testing can give an opportunity to prevent unnecessary endodontic treatment. The current categories of cemento-osseous dysplasia classification do not cover the early stage of a hereditary florid form of cemento-osseous dysplasia. Instead of anatomical location of the lesion, clinical and genetic features may be recommended as parameters of cemento-osseous dysplasia classification.

[Clinical examination of the gingival effects of three glass ionomer restorative materials (GC Fuji IX GP, GC Fuji IX GP EXTRA és GC EQUIA)]. / GC Fuji IX GP, GC Fuji IX GP EXTRA és GC EQUIA üvegionomer tömoanyagok gingiva állapotára gyakorolt hatásának vizsgálata.

The restoration of cervical abrasions, erosions or cervical carious lesions is still challenging because of their unpredictable adhesion and possible negative effects on the marginal plaque accumulation. The impact of three different glass ionomer cements (GIC) on the marginal gingiva and root sensitivity was studied. Furthermore, it was investigated in details, whether or not a recently developed light curing varnish (GC Coat - EQUIA) had any additional effect on the gingival tissue. A total number of 30 non-smokers with healthy gingiva having at least one cervical supra/paragingival abrasion/erosion/abfraction defects were enrolled in the present study. The cervical defects were randomly restored by using one of the three GIC and the gingival parameters were recorded and evaluated at baseline, 6 weeks and 6 months. According to our results root sensitivity were substantially decreased in all the three groups. Plaque scores were also reduced in all groups with the greatest improvement at the sites where the new varnish were applied. Although this improvement was not reflected by the gingival parameters, such as bleeding on probing and crevicular fluid flow, since both were slightly increased in the varnish group. However, neither the intra-group, nor the intergroup differences reached statistical significance. Consequently, the three investigated GIC did not significantly affect the gingival health, therefore they might serve as alternative for the treatment of such cervical lesions. Nevertheless, the new light cure varnish-coated GIC did not seem to be either clinically or statistical significantly more favorable.

Management of Odontogenic Sinusitis: Results with Single-Step FESS and Dentoalveolar Surgery.

OBJECTIVE: Odontogenic sinusitis (OS) is a well-known and important border of specialties in otorhinolaryngology and dentoalveolar surgery. Odontogenic sinusitis can develop due to iatrogenic harm or odontogenic infection. The gold standard diagnostic method is clinical and radiological-CBCT (cone beam computed tomography)-examination. The treatment of this condition requires collaboration between ENT and dentoalveolar surgery specialists and can be non-surgical or surgical based on staging. This paper aims to share the results of our clinical study whereby complex therapy was administered by a dentoalveolar surgeon and an otorhinolaryngologist in cooperation. PATIENTS AND METHODS: We conducted a retrospective study comprising 111 OS patients who underwent complex therapy between 2016 and 2023 at Semmelweis University, Budapest, Hungary. All patients were treated with concurrent FESS (functional endoscopic sinus surgery) and dentoalveolar surgery. Follow-up was based on symptoms, clinical examination and CBCT imaging. RESULTS: Of the 111 patients, 107 were successfully treated with concurrent FESS and dentoalveolar surgery, and only 4 had further symptoms following the complex therapy and needed retreatment. CONCLUSIONS: The complex, single-session therapy involving FESS and oral surgery is an effective treatment method, which is less invasive and associated with fewer complications compared to previous interventions, such as the Luc-Caldwell procedure.

Qualitative assessment of microstructure and Hertzian indentation failure in biocompatible glass ionomer cements.

Discs of biocompatible glass ionomer cements were prepared for Hertzian indentation and subsequent fracture analyses. Specifically, 2 × 10 mm samples for reproducing bottom-initiated radial fracture, complemented by 0.2 × 1 mm samples for optimal resolution with X-ray micro tomography (µCT), maintaining dimensional ratio. The latter allowed for accurate determination of volumetric-porosity of the fully cured material, fracture-branching through three Cartesian axes and incomplete bottom-initiated cracking. Nanocomputed tomography analyses supported the reliability of the µCT results. Complementary 2-dimensional fractographic investigation was carried out by optical and scanning electron microscopies on the larger samples, identifying fracture characteristics. The combined 3-D qualitative assessment of microstructure and fractures, complemented by 2-D methods, provided an increased understanding of the mechanism of mechanical failure in these cements. Specifically, cracks grew to link pores while propagating along glass-matrix interfaces. The methodological development herein is exploitable on related biomaterials and represents a new tool for the rational characterisation, optimisation and design of novel materials for clinical service.

Targeted histological evaluation shows high incidence of actinomyces infection in medication-related osteonecrosis of the jaws.

Medication-Related Osteonecrosis of the Jaws (MRONJ) is a difficult-to-treat complication of the therapy of osteoporosis and some malignancies cured with bisphosphonates and antiresorptive drugs. The pathomechanism is unclear, but there is increasing observation that Actinomyces infection may play a role in its development and progression. The aim of our study was to demonstrate that histological examination using a validated triple staining procedure for Actinomyces bacteria strains can detect a high rate of Actinomyces infection in patient's samples with MRONJ. 112 previously hematoxylin-eosin (HE) stained samples submitted with the clinical diagnosis of MRONJ were re-evaluated histologically using an appropriate triple special staining validated for the identification of Actinomyces infection. During the first evaluation, when pathologists did not specifically look for Actinomyces, only 8.93% of the samples were reported as positive. In contrast, re-evaluation with triple staining provided a yield of 93.7% positive samples, therefore, we suggest the triple special staining to be standard in MRONJ histology evaluation. These results show that if the clinician suspects Actinomyces infection and brings this to the attention of the pathologist, it could significantly increase the number of correct diagnoses. It serves as an aid for clinicians in therapeutic success of MRONJ by selecting a long-term adequate antibiotic medication which is suitable for the elimination of actinomyces infection.

Albumin-Impregnated Allograft Filling of Surgical Extraction Sockets Achieves Better Bone Remodeling Than Filling with Either Blood Clot or Bovine Xenograft.

PURPOSE: The goal of this study was to compare bone graft materials in mandibular third molar extraction sockets and to monitor bone remodeling and complications. MATERIALS AND METHODS: Patients with bilateral, impacted mandibular third molars were involved. Twenty-four patients were planned to be randomly assigned to three possible treatments: (1) the control sockets were left empty; (2) the socket was filled with bovine xenograft (Bio-Oss); or (3) the socket was filled with albumin-impregnated bone allograft (BoneAlbumin). Postoperative pain during the first week was determined with the visual analog scale. Cone beam computed tomography (CBCT) images were taken at 6 and 12 weeks and 1 year postoperatively for micromorphologic analysis and measurement of pocket depth at the second molar. Patients and image analyses were blinded toward the treatment group (randomized double-blind split-mouth design). RESULTS: Postoperative pain was lowest in the allograft group (control: 5.06 ± 0.53; xenograft: 5.85 ± 0.42; allograft: 3.94 ± 0.52; P < .05). At weeks 6 and 12, early signs of remodeling were observed in the allograft group and the controls, while bone xenograft was still demarcated from the host bone. The 1-year CBCT images showed complete remodeling and integration of allograft with natural trabecular structure, while the xenograft particles were still visible. Support for the second molar was significantly better, as evidenced by less deep and prevalent pockets in the allograft-filled group compared with the controls (P = .017). CONCLUSION: Filling an extraction socket with albumin-integrated allografts provides superior bone regeneration compared to either native bone buildup or xenograft application or socket regeneration without bone grafting.

Effectiveness of Parameters in Quantifying Root Canal Morphology Change after Instrumentation with the Aid of a Microcomputed Tomography.

The objective of this study was to analyse the effectiveness of some parameters which characterise the change in morphology in human root canals subjected to ProTaper rotary enlargement with the help of an X-ray microfocus computed tomography (MCT) and to introduce a novel parameter that is effective in quantifying changes in root canal morphology. Ten each straight and curved root canals with mature apices chosen from extracted human upper incisor and canine teeth were scanned with MCT before and after canal shaping using ProTaper rotary instruments in order to facilitate three-dimensional digital reconstruction and quantitative gauging of relevant instrumental parameters and changes therein (surface area and volume). Root canal geometry change and the effectiveness of shaping were quantified with Structure Model Index change (ΔSMI) and surface area change to volume change ratio (ΔSA/ΔV). These two parameters were also tested on simulated canals. Postinstrumentation cross-sectional changes were also analysed, but only on the plastic blocks. Statistical analysis of parameters was carried out to verify the significance of results. Analysis of cross-sectional shape of postinstrumented resin simulated canals showed statistically significant decrease in Form Factor (p<0.05) and statistically significant increase in Eccentricity (p<0.005). ΔSMI did not show significant difference between straight and curved canals. SMI values showed bidirectional change during root enlargement which questions the reliability of this metric in analysing instrumentation. Statistically significant (p<0.005) deviations in ΔSA/ΔV were quantified as 1.92 and 3.22 for straight and curved human canals, respectively. Instrumentation-induced canal geometry change was determined to be more pronounced in curved canals using the novel parameter ΔSA/ΔV. This has been proven as being a statistically accurate and reproducible parameter for quantitative characterisation of root canal geometry change and differentiation of preparational efficacy for both straight and curved root canals.

Cell physiological effects of glass ionomer cements on fibroblast cells.

The cytotoxicity of glass ionomer cements (GICs) was investigated using a novel, cost-effective, easy-to-perform and standardized test. GIC rings were made using in-house designed, custom-made moulds under sterile conditions; 10 with Fuji Equia and 10 with Fuji Triage capsules, placed in direct contact with primary human gingival fibroblasts (HGF) and immortalized human fibroblasts (HFF1). On day 1, 4, 14 and 21, an AlamarBlue® (resazurin) assay was completed towards determining the effects of the GICs on metabolic activities of the cells, whilst cell morphology was examined by light microscopy. The influence of the compounds released from the GIC rings on cell physiological effects (viability, proliferation and adhesion) during 24 h incubation was further investigated by impedimetry. Result trends obtained from this battery of techniques were complementary. At 100 v/v% concentration, the released compounds from Equia were strongly cytotoxic, while at lower concentration (0, 4, 20 v/v%) they were not cytotoxic. In contrast, Triage elicited only slightly transient cytotoxicity. The method proposed has been proved as being efficient, reliable and reproducible and may be useful in quick testing of the cytotoxicity of similar biomaterials by using an immortalized cell line.

Serum albumin-coated bone allograft (BoneAlbumin) results in faster bone formation and mechanically stronger bone in aging rats.

Serum albumin-coated bone allografts (BoneAlbumin) have successfully supported bone regeneration in various experimental models by activating endogenous progenitors. However, the effect of tissue aging, linked to declining stem cell function, has yet to be explicitly examined within the context of BoneAlbumin's regenerative capacity. Stem cell function was tested with an in vitro attachment assay, which showed that albumin coating increases stem cell attachment on demineralized bone surfaces in an aging cell population. Bone regeneration was investigated in vivo by creating critical size bone defects on the parietal bones of aging female rats. Demineralized bone matrices with and without serum albumin coating were used to fill the defects. Bone regeneration was determined by measuring the density and the size of the remaining bone defect with computed tomography (CT). Microcomputed tomography (MicroCT) and mechanical testing were performed on the parietal bone explants. In vivo CT and ex vivo microCT measurements showed better regeneration with albumin-coated grafts. Additionally, the albumin-coated group showed a twofold increase in peak fracture force compared with uncoated allografts. In the present study, serum albumin-coated demineralized bone matrices successfully supported faster and functionally superior bone regeneration in aging rats. Because stem cell function, a key contributor of bone remodelling, decreases with age and serum albumin is an effective activator of endogenous progenitor cells, this method could be an effective and safe adjuvant in bone regeneration of aging adult and osteo-compromised populations.

Serum albumin coating of demineralized bone matrix results in stronger new bone formation.

Blood serum fractions are hotly debated adjuvants in bone replacement therapies. In the present experiment, we coated demineralized bone matrices (DBM) with serum albumin and investigated stem cell attachment in vitro and bone formation in a rat calvaria defect model. In the in vitro experiments, we observed that significantly more cells adhere to the serum albumin coated DBMs at every time point. In vivo bone formation with albumin coated and uncoated DBM was monitored biweekly by computed tomography until 11 weeks postoperatively while empty defects served as controls. By the seventh week, the bone defect in the albumin group was almost completely closed (remaining defect 3.0 ± 2.3%), while uncoated DBM and unfilled control groups still had significant defects (uncoated: 40.2 ± 9.1%, control: 52.4 ± 8.9%). Higher density values were also observed in the albumin coated DBM group. In addition, the serum albumin enhanced group showed significantly higher volume of newly formed bone in the microCT analysis and produced significantly higher breaking force and stiffness compared to the uncoated grafts (peak breaking force: uncoated: 15.7 ± 4 N, albumin 46.1 ± 11 N). In conclusion, this investigation shows that implanting serum albumin coated DBM significantly reduces healing period in nonhealing defects and results in mechanically stronger bone. These results also support the idea that serum albumin coating provides a convenient milieu for stem cell function, and a much improved bone grafting success can be achieved without the use of exogenous stem cells.

Atomic and vibrational origins of mechanical toughness in bioactive cement during setting.

Bioactive glass ionomer cements (GICs) have been in widespread use for ∼40 years in dentistry and medicine. However, these composites fall short of the toughness needed for permanent implants. Significant impediment to improvement has been the requisite use of conventional destructive mechanical testing, which is necessarily retrospective. Here we show quantitatively, through the novel use of calorimetry, terahertz (THz) spectroscopy and neutron scattering, how GIC's developing fracture toughness during setting is related to interfacial THz dynamics, changing atomic cohesion and fluctuating interfacial configurations. Contrary to convention, we find setting is non-monotonic, characterized by abrupt features not previously detected, including a glass-polymer coupling point, an early setting point, where decreasing toughness unexpectedly recovers, followed by stress-induced weakening of interfaces. Subsequently, toughness declines asymptotically to long-term fracture test values. We expect the insight afforded by these in situ non-destructive techniques will assist in raising understanding of the setting mechanisms and associated dynamics of cementitious materials.