Self-assembly of polytetrafluoroethylene nanoparticle films using repulsive electrostatic interactions.

An approach for manufacturing polytetrafluoroethylene nanoparticle films using repulsive electrostatic interactions was developed. This approach used the strong repulsive force between colloidal nanoparticles and a substrate surface to cause the colloidal nanoparticles to suspend and self-assemble at a near-wall equilibrium position. A suspended monolayer was formed and was subsequently deposited on the substrate surface. A relatively large-area (3 × 3 cm(2)), close-packed unordered monolayer of polytetrafluoroethylene nanoparticles was observed. Multilayer nanoparticle films were also generated by increasing the particle concentration and deposition time. This work confirms the feasibility of nanoparticle self-assembly under repulsive electrostatic interactions and provides new routes for the large-area fabrication of monolayer and multilayer close-packed nanoparticle films.

Recovery of high-quality phosphate from steelmaking slag by a hydrometallurgical process.

Phosphorus recovery from wastes has become a worldwide concern. The P-bearing steelmaking slag generated from steel plant is considered a potential phosphorus source. In this study, a novel process of selective leaching-precipitation-alkaline wash was proposed to recover high-quality phosphate from steelmaking slag. During leaching, most of the P was dissolved from slag and Fe was almost insoluble. Increasing temperature and solid-liquid ratio significantly suppressed the dissolution of Si due to the formation of silica sols. An excellent selective leaching of P was achieved at pH 3 and 333 K. The dissolution ratio of P reached 83.5% while only 22.6% of Si was dissolved. The residue containing 49.5% Fe2O3 and 0.9% P2O5 can be reused as a steelmaking feedstock, achieving the recycling in plant. In the dilute leachate, the precipitation of Si and Ca was significantly suppressed as the pH increased and a precipitate with higher P2O5 content and lower SiO2 content was extracted. A large amount of SiO2 was removed from the precipitate by alkaline wash. A precipitate containing 30.1% P2O5 and 45.5% CaO was recovered in this process. This study provided a cost-effective approach to recovering high-quality phosphate.

Pollution Characteristics of Microplastics in Soils in Southeastern Suburbs of Baoding City, China.

Microplastics (MPs) are emerging pollutants that exist in different environmental media. Because of their wide range and large potential environmental hazards, they have attracted widespread attention in recent years. At present, the research on MP is mostly concentrated on the water ecosystems, and the impact on soil ecosystems is less studied. In this study, 12 typical soil samples from southeastern suburbs of Baoding city were investigated and characterized by time-of-flight secondary ion mass spectrometry (TOF-SIMS) combined with mass high resolution mode and positive and negative ion imaging mode. Four types of MPs, poly (propylene) (PP), poly (vinyl chloride) (PVC), poly (ethylene terephthalate) (PET), and poly (amide 6) (PA6), were quickly identified, of which PET and PA6 accounted for the largest proportion of both up to 30.2%; the particle size of the obtained MPs ranged from 0 to 35 µm, of which the proportion of <10 µm MPs was more than 26.3%, while that of 20-25 µm and 25-35 µm MPs was relatively small (17.83% and 9.3%, respectively). Risk assessment results of the MP in the soil showed that the risk level of MPs in the non-ferrous metal industrial parks and in concentrated with small workshops areas is relatively high, and attention should be paid to such areas. In addition, the study provides a reference method for the investigation and risk assessment of MPs in terrestrial soils, coastal beaches, and sediments.

Contribution of frustules and mucilage trails to the mobility of diatom Navicula sp.

The secreted mucilage trails of the diatom Navicula sp. in the process of motility were studied by scanning electron microscopy (SEM), transmission electron microscope (TEM), atomic force microscopy (AFM) and Raman spectra etc. Contrary to previous studies, force measurement was taken directly on the mucilage trails of live cells using the method of in situ force mapping by AFM. The retraction force curve presented an increased tip-substrate peak and a small saw-tooth pattern tip-mucilage peak. Especially, same measurements on various substrates with different surface energy revealed that the mucilage trails actually functioned as a medium increasing the adhesive force between the diatom and substrates, which is crucial to diatom's adhesion and locomotion. In addition, the mechanical properties of mucilage trails were quite different from mucilage strands in the maximum adhesive force and the maximum polymer extension length. Raman spectra indicated the difference in compositions that both of the two kinds of mucilages had proteins and polysaccharide, but the mucilage strands contained some other components with C=O, -CH2- and -CH3 asymmetric and symmetric stretches. This research hammers out more precise information about mucilage trails which would be useful in terms of diatom motility and biofouling prevention.

High-performance and stable organic transistors and circuits with patterned polypyrrole electrodes.

High performance p-/n-type transistors and complementary inverter circuits are demonstrated using patterned polypyrrole (PPY) as pure electrodes. Strikingly, these devices show good stability under continuous operation and long-term storage conditions. Furthermore, PPY electrodes also exhibit good applicability in solution-processed and flexible devices. All these results indicate the great potential of PPY electrodes in solution-processed, all-organic, flexible, transparent, and low-power electronics.