Intervention with extracellular matrix metalloproteinase inducer in osteoclasts attenuates periodontitis-induced bone resorption.

Extracellular matrix metalloproteinase inducer (EMMPRIN) plays critical roles in the regulation of inflammation and bone metabolism. The roles of EMMPRIN signaling in osteoclasts are worthy of deep study. The present study aimed to investigate bone resorption in periodontitis through the intervention of EMMPRIN signaling. The distribution of EMMPRIN in human periodontitis was observed. RANKL-induced osteoclast differentiation of mouse bone marrow-derived macrophages (BMMs) were treated with EMMPRIN inhibitor in vitro. Rats with ligation-induced periodontitis were treated with EMMPRIN inhibitor and harvested for microcomputed tomography scanning, histologic observation, immunohistochemistry, and double immunofluorescence analysis. Positive expressions of EMMPRIN could be found in the CD68+-infiltrating cells. Downregulated EMMPRIN restrained osteoclast differentiation of BMMs in vitro, which also inhibited MMP-9 expression (*P < 0.05). In vivo, EMMPRIN inhibitor restrained ligation-induced bone resorption by decreasing tartrate-resistant acid phosphatase-positive osteoclasts. Both EMMPRIN-positive and MMP-9-positive osteoclasts were less common in the EMMPRIN inhibitor groups than in the control groups. Intervention of EMMPRIN signaling in osteoclasts could probably provide a potential therapeutic target for attenuating ligation-induced bone resorption.

G-Quadruplex-Proximized Aptamers (G4PA) Efficiently Targeting Cell-Surface Transferrin Receptors for Targeted Cargo Delivery.

DNA-assembled multiaptamer systems have been demonstrated to significantly promote the aptamer capacity of binding cell-surface-expressed proteins. However, how to conveniently harness them for efficient transmembrane delivery of targets remains a challenge. Toward this goal, here we engineer a G-quadruplex-proximized aptamer (G4PA) system in which a DNA aptamer specific for transferrin receptor (TfR) is guided by a bimolecular G4 and assembles into a dimerized proximity form that well matches homodimeric TfR highly expressed on the cancer cell surface. This system displays a higher capacity for targeting cell-surface TfR than the monomeric aptamer and super transmembrane transportation of nucleic acid cargoes, which is comparable to that of conventional liposome transfection but overcomes the lack of targeting ability of the latter. The G4PA system is then applied to the targeted delivery of siRNA for PLK1 gene silencing in positive cells rather than negative controls, showing great promise for use in precise anticancer therapy.

Denervation delays initial bone healing of rat tooth extraction socket.

Functions of nerves on bone has been a subject of intense research. The aim of this study is to observe initial bone healing of rat tooth extraction socket after inferior alveolar nerve transection. The bilateral mandible second molars of eighteen Wistar rats were extracted in the study. The rats also suffered from right inferior alveolar nerve transection simultaneously (D + E group), only extraction as control (E group). One, two and four weeks after extraction, the mandibles were taken out for histological observation, TRAP staining, immunofluorescence, immunohistochemistry and micro-computed tomography (Micro-CT). Mouse bone marrow derived macrophages (BMMs) were cultured in vitro. Expressions of nuclear factor erythroid 2-related factor 2 (Nrf2) were detected in vivo and vitro. The alveolar sockets had been filled to a large extent with new bone at 4 weeks, but BV/TV and BMD decreased in the D + E group. Accordingly, Expressions of osteocalcin (OCN) and osteopontin (OPN) were down-regulated in the D + E group. Denervation increased TRAP-positive osteoclasts and decreased expressions of Nrf2 at 2 weeks after extraction. Decreased Nrf2 promoted osteoclast differentiation of BMMs in vitro. Denervation delays initial bone healing of rat tooth extraction socket. Osteoclast activation induced by decreased Nrf2 might participated in the process.

Construction and Evaluation of Traceable rhES-QDs-M-MS Protein Delivery System: Sustained-Release Properties, Targeted Effect, and Antitumor Activity.

Recombinant human endostatin (rhES) is a protein drug with poor stability and short in vivo circulation time. The present study was therefore aimed at developing sustained-release lung targeted microspheres drug delivery system and evaluating its targeting efficiency using in vivo imaging techniques with quantum dots (QDs) as the imaging material. The oil-soluble QDs were coated with amphiphilic polymers to obtain a polymer-quantum dots micelle (QDs-M) with the potential to stably disperse in water. The rhES and QDs-M were combined using covalent bonds. The rhES-QDs-M microspheres (rhES-QDs-M-MS) were prepared using electrostatic spray technology and also evaluated via in vivo imaging techniques. The pharmacodynamics was further studied in mice. The rhES-QDs-M-MS (4-8 µm) were stable in an aqueous medium with good optical properties. The in vitro studies showed that the rhES-QDs-M-MS had sustained release which was maintained for at least 15 days (cumulative release >80%) without any burst release. The rhES-QDs-M-MS had a very high safety profile and also effectively inhibited the in vitro proliferation of human umbilical vein endothelial cells by about 70%. The pharmacokinetic results showed that the rhES could still be detected at 72 h in the experimental group which meant that the rhES-QDs-M-MS had a significant sustained-release effect. The rhES-QDs-M-MS had a better lung targeting effect and higher antitumor activity compared with the rhES. The traceable rhES-QDs-M-MS served as a promising drug delivery system for the poorly stable rhES proteins and significantly increased its lung-targeted effect, sustained-release properties, and antitumor activities.

Variations of root and canal morphology of mandibular second molars in Chinese individuals: a cone-beam computed tomography study.

BACKGROUND: The mandibular second molars demonstrate variations on root and canal morphology. The aim of this study was to investigate all the root canal morphology of mandibular second molars and analyze the morphological variations in patients by gender and age in a Chinese population use CBCT imaging. METHODS: Cone-beam computed tomographic images of 1200 bilateral mandibular second molars were obtained from 600 patients (300 females and 300 males) who required a preoperative assessment for implant surgery, surgical removal of impacted teeth, orthodontic treatment, surgery of maxillofacial tumour and cysts or LeFort I osteotomy. CBCT images were divided into 5 groups according to age: "15-24 years", "25-34 years", "35-44 years", "45-54 years" and "≥ 55 years"; and 2 groups by gender: "females" and "males". The following information were recorded: the number of roots and canals and their morphology, the frequency and configuration of C-shaped canals by gender, age and position (left and right). The chi-square test was used to analyse differences between groups. P value of < 0.05 was considered statistically significant. RESULTS: Of the 1200 teeth, 61% had two separate roots located mesiodistally, 35.6% had one C-shaped root. The 45.3% teeth had three canals in two-rooted mandibular second molars. The mesial root showed a Vertucci type II configuration in 28.9% cases followed by type IV(24.4%). While the distal root showed a significant higher prevalence of type I configuration in 95.6%. In the examined 1200 teeth, 430 teeth (35.8%) had C-shaped root canals. The prevalence of C-shaped root canal systems was significantly higher in females (42.5%) than in males (29.1%) (P = 0.000), and did not differ with age (P = 0.126). The 80.4% C-shaped canals were bilateral (P = 0.000) and did not differ with side (left and right) (P = 0.758). CONCLUSIONS: The most commonly observed root morphology for the mandibular second molars was 2 separate roots with three canals.The prevalence of C-shaped root canal is 35.8% and is more higher in females than in males.

Sutured Scleral Fixation of Posterior Chamber Intraocular Lens in Children under the Age of 9 with Congenital Ectopia Lentis.

INTRODUCTION: This study aimed to report the visual acuity outcomes and complications of sutured scleral fixation of posterior chamber intraocular lens (IOL) in children under 9 years old with congenital ectopia lentis. METHODS: Twenty-six children (47 eyes) with congenital ectopia lentis were included in this study. The mean age at surgery was 61.6 ± 22.3 months (range, 32-94). Patients underwent lens extraction, anterior vitrectomy, and sutured scleral fixation of posterior chamber IOL. The implanted IOL included rigid polymethyl methacrylate (PMMA) IOL (CZ70BD, n = 36) and foldable IOL (SA60AT, n = 9, and LI61SE, n = 2). The outcome measures used to assess the benefits were uncorrected visual acuity (UCVA), best-corrected visual acuity (BCVA), refraction, intraocular pressure, and any associated complications. Median follow-up was 33.0 months (range, 4-129). RESULTS: After surgery, the median UCVA (1.30 vs. 0.35 logMAR) and BCVA (0.82 vs. 0.15 logMAR) improved significantly (p < 0.001). The median absolute spherical values decreased considerably (9.00 vs. 0.75 D; p < 0.001). The median astigmatism was lower in foldable IOL compared to rigid PMMA IOL (1.0 vs. 2.5 D; p = 0.026), but neither the UCVA nor BCVA was significantly different. There was no intraoperative complication. Postoperative complications included pupillary capture in 4 eyes (9%), IOL decentration in 4 eyes (9%), choroid edema in 1 eye (2%), and subretinal hemorrhage in 1 eye (2%). The rate of secondary surgery was 9%, caused by IOL decentration of IOL haptics which was broken in 3 eyes and suture degradation in 1 eye. CONCLUSION: Sutured scleral fixation of posterior chamber IOL provided good visual outcomes in children under 9 years of age with congenital ectopia lentis. Although there were some risks of secondary surgery, the complications were acceptable.

Substance P participates in periodontitis by upregulating HIF-1α and RANKL/OPG ratio.

BACKGROUND: Both substance P and hypoxia-inducible factor 1 alpha (HIF-1α) are involved in inflammation and angiogenesis. However, the relationship between substance P and HIF-1α in rat periodontitis is still unknown. METHODS: Ligation-induced rat periodontitis was established to observe the distribution and expression of substance P and HIF-1α by immunohistochemistry. Rat gingival fibroblasts were cultured and stimulated with Porphyromonas gingivalis lipopolysaccharide (LPS). Recombinant substance P was applied to elaborate the relationship between substance P and HIF-1α in gingival fibroblasts in vitro. Primary mouse bone marrow-derived macrophages (BMMs) were isolated and cultured to observe the effect of substance P on receptor activator of NF-κB ligand (RANKL)-induced osteoclastogenesis by TRAP staining. Western blotting was used to investigate the expression of HIF-1α, osteoprotegerin (OPG) and RANKL. RESULTS: Rat experimental periodontitis was successfully established 6 weeks after ligation. Gingival inflammatory infiltration and alveolar bone loss were observed. Positive expression of substance P was found in the infiltrating cells. Higher HIF-1α levels were observed in periodontitis compared to that of normal tissues. Substance P upregulated the level of HIF-1α in gingival fibroblasts with or without 1 µg/ml LPS in vitro (*P < 0.05). Substance P upregulated the expression of HIF-1α in RANKL-stimulated BMMs in vitro. Substance P also increased the RANKL/OPG ratio in gingival fibroblasts (*P < 0.05). Both 10 nM and 50 nM substance P promoted RANKL-induced osteoclast differentiation (*P < 0.05). CONCLUSION: Substance P participates in periodontitis by upregulating HIF-1α and the RANKL/OPG ratio.

Periodontal ligament-associated protein-1 gets involved in experimental periodontitis.

BACKGROUND AND OBJECTIVE: Periodontal ligament-associated protein-1 (PLAP-1) is an important regulator of osteogenic differentiation of periodontal ligament cells and plays important role in the homeostasis of periodontal tissues. But the role of PLAP-1 in periodontitis is poorly understood. Expressions of PLAP-1 in experimental periodontitis are observed to elucidate whether PLAP-1 gets involved in the pathogenesis of periodontitis. MATERIAL AND METHODS: Wistar rats were randomly allocated to two groups (n = 6/group): Ligation group and Control group. PLAP-1 expression in experimental periodontitis was assessed by immunohistochemistry and collagen fibers in periodontal ligament were observed using picrosirius red staining. Expressions of PLAP-1 and CD68 in periodontitis were colocalized by double-labelled immunofluorescence. To further examine the relationship between PLAP-1 and osteoclastogenesis in experimental periodontitis, acute periodontal inflammatory infiltration and alveolar bone destruction were induced by administering ligated rats with 10 ng/mL tumor necrosis factor alpha (TNF-α; ligation + TNF-α group, n = 6). Alveolar bone loss was observed by micro-computed tomography (Micro-CT), and osteoclasts were identified by tartrate-resistant acid phosphatase staining (TRAP). Expressions of PLAP-1 in TNF-α stimulated human periodontal ligament cells were also detected at 24 and 48 hours by western blotting. RESULTS: PLAP-1 expression levels in periodontal ligament cells and collagen fibers were lower in the ligation group,compared with the control group. Similarly, TNF-α decreased PLAP-1 expression in human periodontal ligament cells in vitro. Degradation or destruction of collagen fibers accompanied the reduced PLAP-1 expression in the periodontal ligament in the ligation group. Colocalization of PLAP-1 and CD68 revealed the positive relationship between PLAP-1 and CD68+ infiltrating cells in periodontitis. More PLAP-1-positive inflammatory cells were found in the ligation + TNF-α group, compared with the ligation + saline group. CONCLUSION: PLAP-1-positive inflammatory cells are involved in the pathogenesis of periodontitis. An increase in PLAP-1-positive inflammatory cell number contributes periodontal inflammation and alveolar bone loss.

MicroRNA-506 Is Involved in Regulation of the Occurrence of Lipopolysaccharides (LPS)-Induced Pulpitis by Sirtuin 1 (SIRT1).

BACKGROUND Toothache often occurs with pulpitis. Lipopolysaccharide (LPS) is produced by gram-negative bacteria, and its accumulation is related to clinical symptoms of pain. MicroRNAs (miRNAs) display anti-inflammatory potential due to their direct regulation of cellular protein expression, which can promote inflammatory changes in dental pulp tissues. However, the mechanism of LPS-induced pulpitis is still unclear. MATERIAL AND METHODS In this study, dental pulp stem cells (DPSCs) were separated and cultured from rat dental pulp tissues; then, LPS was administered to induce inflammation and activate the TLR4 pathway. RESULTS It was found that miR-506 was upregulated following LPS treatment in DPSCs. The inhibition of miR-506 in LPS-treated DPSCs led to attenuated inflammation and deactivation of the TLR4 pathway. Furthermore, the bioinformatic analysis and dual-luciferase reporter gene assay indicated that miR-506 could target the 3'-UTR of sirtuin 1 (SIRT1). Additionally, SIRT1 decreased in LPS-treated DPSCs, and miR-506 transfection resulted in SIRT1 upregulation. SIRT1 overexpression showed a similar inhibitory effect as that of miR-506 downregulation on inflammation and TLR4 activation in DPSCs. CONCLUSIONS In brief, miR-506 can protect dental pulp in LPS-induced inflammation by inhibiting the SIRT1-mediated TLR4 pathway.

Radiological tissue equivalence of deformable silicone-based chemical radiation dosimeters (FlexyDos3D).

FlexyDos3D, a silicone-based chemical radiation dosimeter, has great potential to serve as a three-dimensional (3D) deformable dosimetric tool to verify complex dose distributions delivered by modern radiotherapy techniques. To facilitate its clinical application, its radiological tissue needs to be clarified. In this study we investigated its tissue-equivalence in comparison with water and Solid Water (RMI457). We found that its effective and mean atomic numbers were 40% and 20% higher and the total interaction probabilities for kV x-ray photons were larger than those of water respectively. To assess the influence of its over-response to kV photons, its HU value was measured by kV computed tomography (CT) and was found higher than all the soft-tissue substitutes. When applied for dose calculation without correction, this effect led to an 8% overestimation in electron density via HU-value mapping and 0.65% underestimation in target dose. Furthermore, depth dose curves (PDDs) and off-axis ratios (profiles) at various beam conditions as well as the dose distribution of a full-arc VMAT plan in FlexyDos3D and reference materials were simulated by Monte Carlo, where the results showed great agreement. As indicated, FlexyDos3D exhibits excellent radiological water-equivalence for clinical MV x-ray dosimetry, while its nonwater-equivalent effect for low energy x-ray dosimetry requires necessary correction. The key findings of this study provide pertinent reference for further FlexyDos3D characterization research.

Comparative Outcomes of Block and Cancellous Iliac Bone Grafting in Older Unilateral Alveolar Cleft Patients.

OBJECTIVE: To compare osseous outcomes of block and cancellous iliac bone grafting in older unilateral alveolar cleft patients. DESIGN: Retrospective and observational follow-up study. SETTING: Cleft Lip and Palate Centre, Department of Oral and Maxillofacial Surgery, Affiliated Hospital of Stomatology, Nanjing Medical University, China. PATIENTS: Forty-five nonsyndromic patients with unilateral complete alveolar cleft were enrolled in this study (25 patients in block bone graft group and 20 patients in cancellous bone graft group). INTERVENTIONS: In cancellous bone graft group, the alveolar cleft was filled with iliac cancellous bone particulate. In group of block bone graft, the harvested bone block was trimmed and fixed in alveolar defect. MAIN OUTCOME MEASURES: A novel method was proposed to investigate the volume and density of residual bone graft at 1-week, 3- and 6-month, 1- and 2-year postoperatively based on cone beam computed tomography scans. RESULTS: No difference in bone graft volume was found between 2 groups at 1-week and 3-month postoperatively; however, the residual volume of block bone graft group was significantly larger than that of cancellous bone graft group at 6-month, 1- and 2-year postoperatively. The bone density of block bone graft group was lower at 1-week and 3-month postoperatively but was comparable at 6-month, 1- and 2-year postoperatively. Our method was reliable and accurate to identify the range of residual bone graft when the boundary of grafted bone could not be identified clearly. CONCLUSION: Block bone graft could achieve comparable bone density and retain a greater amount of residual bone comparing to cancellous bone graft.

Anatomical Study and Clinical Application of Facial Artery Perforator Flaps in Intraoral Reconstruction: Focusing on Venous System.

PURPOSE: Facial artery perforator flaps (FAPFs) are preferred for the repair of intraoral and peri-nasal defects because it is a convenient procedure with minimal donor-site morbidity. The purpose of this study was to investigate the anatomic features of FAPFs and present their clinical application in intraoral reconstruction. MATERIALS AND METHODS: Five cadaver specimens (10 sides) of the head and neck region and 90 clinical cases (90 sides) of neck dissection were analyzed to explore the facial venous drainage system of FAPFs. In addition, anatomic features of the facial artery and vein and the marginal mandibular branch of the facial nerve were investigated in cadaver specimens. Furthermore, the authors reviewed a series of 33 intraoral reconstruction cases using their designed FAPFs focusing on flap survival and facial venous drainage system types. RESULTS: Based on cadaveric and clinical observations, the facial vein drainage system was divided into 3 types: type A drained into the internal jugular vein (47%); type B drained into the external jugular vein (37%); and type C drained into the anterior jugular vein (16%). The mean distances from the facial artery to the vein at the region of the FAPF pedicle and tip were 2.79 ± 0.51 and 10.24 ± 0.70 mm, respectively. Most cases using the authors' designed FAPFs yielded satisfactory esthetic and functional outcomes, whereas 3 cases presented with venous congestion from type C facial vein drainage. CONCLUSION: This study improved the understanding of the anatomic features and clinical application of FAPFs in intraoral reconstruction. This FAPF design could be used to achieve superior intraoral defect reconstruction, and type C facial vein drainage might be a risk factor for flap survival.

The Effects of Single-Dose Etomidate Versus Propofol on Cortisol Levels in Pediatric Patients Undergoing Urologic Surgery: A Randomized Controlled Trial.

BACKGROUND: The effects of general anesthetics on the hypothalamus-pituitary-adrenal axis and cortisol release in children are poorly characterized. Normal, daily fluctuation of cortisol levels complicates assessment of these effects. This study aimed to characterize the effects of etomidate compared with propofol on the normal cortisol secretory pattern in children undergoing urologic surgery by using a salivary cortisol assay. METHODS: In this prospective, randomized, double-blind, controlled study, we recruited 80 children aged 3 to 12 years assigned ASA physical status I who were scheduled for urologic surgery and 11 healthy child volunteers. Before surgery, cortisol levels of the 11 volunteers and 15 study patients were tested from 7:00 AM to 9:00 PM every hour for 1 day. The study patients were then randomly allocated into an etomidate group and a propofol group, receiving etomidate 0.3 mg/kg (n = 38) or propofol 2 mg/kg (n = 39) and midazolam 0.1 mg/kg, fentanyl 2 µg/kg, and rocuronium 0.6 mg/kg for induction, respectively. The cortisol levels of the patients were assessed continuously for 2 days postoperatively. RESULTS: The cortisol levels of the etomidate group were continuously and significantly lower than those of the propofol group from the time of discharge from the postanesthesia care unit (approximately 2:00 PM) until 8:00 AM the next morning (all P < 0.0001) and were significantly lower than before surgery at the same time points (all P < 0.0001). Except at 11:00 AM just before the operation, no significant differences in cortisol levels were detected before and after the operation in the propofol group (P max = 0.476, P min = 0.002). Also, no significant differences in clinical outcomes were detected between the 2 groups undergoing surgery (all P > 0.070). CONCLUSIONS: Compared with propofol, a single induction dose of etomidate suppressed postoperative cortisol levels in healthy children undergoing urologic surgery. This suppression lasted approximately 24 hours and was not associated with any changes in clinical outcomes.

A double-sided linear primary permanent magnet vernier machine.

The purpose of this paper is to present a new double-sided linear primary permanent magnet (PM) vernier (DSLPPMV) machine, which can offer high thrust force, low detent force, and improved power factor. Both PMs and windings of the proposed machine are on the short translator, while the long stator is designed as a double-sided simple iron core with salient teeth so that it is very robust to transmit high thrust force. The key of this new machine is the introduction of double stator and the elimination of translator yoke, so that the inductance and the volume of the machine can be reduced. Hence, the proposed machine offers improved power factor and thrust force density. The electromagnetic performances of the proposed machine are analyzed including flux, no-load EMF, thrust force density, and inductance. Based on using the finite element analysis, the characteristics and performances of the proposed machine are assessed.

Accurate Evaluation of Cone-Beam Computed Tomography to Volumetrically Assess Bone Grafting in Alveolar Cleft Patients.

OBJECTIVE: The aim of this study was to investigate the accuracy of cone-beam computed tomography (CBCT) to assess the volume of bone graft in alveolar cleft patients. MATERIALS AND METHODS: Twelve patients of unilateral alveolar cleft were included in this study. All patients were taken CBCT preoperative and 1 week postoperative. The digital imaging and communications in medicine (DICOM) files were imported into Simplant software and three-dimensional (3D) reconstruction of the alveolar defect was achieved. With 3D volumetric measurements module, the volume of alveolar cleft was calculated preoperatively. During operation, the syringe compression method was adopted to calculate the actual amount of bone graft. One week postoperative, CBCT scan was performed again to measure the bone volume grafted to the defect. The volumetric ratio of the syringe compression method to preoperative CBCT assessment and the volume difference between syringe compression method and postoperative CBCT assessment were analyzed to evaluate the accuracy of CBCT measurement. RESULTS: The 3D structure of the alveolar cleft and the boundary of bone graft was clear from CBCT images. The estimated volume of alveolar cleft by preoperative CBCT scans was 1.06 ±â€Š0.09 cm, and the actual amount of bone graft determined by the syringe compression method was 1.51 ±â€Š0.12 cm. The ratio between the latter to the former was 1.43 ±â€Š0.07. The calculated volume of bone graft by 1-week postoperative CBCT scans was 1.53 ±â€Š0.11 cm, with no significant difference compared with the actual amount of bone graft (P > 0.05). CONCLUSIONS: CBCT was an accurate measurement to calculate the volume of alveolar defect and bone graft in alveolar cleft patients. Preoperative scans could aid in quantitatively determining the bone amount needed to adequately fill the bone defect, and the postoperative scans give accurate follow-up evaluation after surgery.

[Investigation of fibrous cultural materials by infrared spectroscopy].

Cultural fibrous material includes both important categories, i. e. textile and paper, consisting of precious cultural materials in museum, such as costume, painting, and manuscript. In recent years more and more connoisseur and conservator's concerns are, through nondestructive method, the authenticity and the ageing identification of these cultural relics especially made from fragile materials. In this research, we used attenuated total reflection infrared spectroscopy to identify five traditional textile fibers, alongside cotton, linen, wool, mulberry silk and tussah silk, and another five paper fibers alongside straw, wheat straw, long qisong, Chinese alpine rush and mulberry bar, which are commonly used for making Chinese traditional xuan paper. The research result showed that the animal fiber (wool, mulberry silk and tussah silk) and plant fiber (cotton and linen) were easier to be distinguished by comparing the peaks at 3 280 cm-1 belonging to NH stretching vibration and a serious peaks related to amide I to amide III. In the spectrum of wool, the peak at 1 076 cm-1 was assigned to the S-O stretching vibration absorption of cystine in wool structure and can be used to tell wool from silk. The spectrum of mulberry silk and tussah silk seems somewhat difficult to be identified, as well as the spectrum of cotton and linen. Five rural paper fibers all have obvious characteristic peaks at 3 330, 2 900 cm-1 which are related to OH and CH stretching vibration. In the fingerprint wavenumber range of 1 600 - 800 cm, the similar peaks also appeared at 1 370, 1 320 cm-1 and 1 162, 1 050 cm-1, both group peaks respectively are related to CH and CO vibration in the structure of cellulose and hemicellulose in paper fibers. Although there is more similarity of the infrared spectroscopy of these 5 paper fibers, some tiny difference in absorbance also can be found at 3 300 cm-1 and in the fingerprint range at 1 332, 1 203, and 1 050 cm-1 which are related to C-O-C vibration in cellulose. Moreover, in order to explore direct and simple method to identify different materials with similar spectrum,. the principal component analysis (PCA) was applied to separate cotton and linen, mulberry silk and tussah silk, as well as five paper fibers. To eliminate and reduce the spectral scattering caused by sample uneven surface roughness, the multiplicative scatter correction (MSC) has been applied based on total spectral data. The result showed that the score plot using the first two principal components can effectively categorize both group textiles of cotton and linen, as well as mulberry silk and tussah silk, and they have similar chemical structure. For five paper fibers, the PCA was applied in different spectral range (918-550, 1 280-918, 1 700-1 280 and 3 800-2 800 cm-1), and the best result appeared in the range from 3 800 to 2 800 cm-1, in which the five paper fibers can be well categorized. This research showed that infrared spectroscopy combined with principal component analysis has great potential advantage on identifying fibrous materials with similar structure.

Sensitive and selective detection of copper ions with highly stable polyethyleneimine-protected silver nanoclusters.

Copper is a highly toxic environmental pollutant with bioaccumulative properties. Therefore, sensitive Cu(2+) detection is very important to prevent over-ingestion, and visual detection using unaugmented vision is preferred for practical applications. In this study, hyperbranched polyethyleneimine-protected silver nanoclusters (hPEI-AgNCs) were successfully synthesized using a facile, one-pot reaction under mild conditions. The hPEI-AgNCs were very stable against extreme pH, ionic strength, temperature, and photoillumination and could act as sensitive and selective Cu(2+) sensing nanoprobes in aqueous solutions with a 10 nM limit of detection. In addition, hPEI-AgNCs-doped agarose hydrogels were developed as an instrument-free and regenerable platform for visual Cu(2+) and water quality monitoring.

Cartilage repair using mesenchymal stem cell (MSC) sheet and MSCs-loaded bilayer PLGA scaffold in a rabbit model.

PURPOSE: The integration of regenerated cartilage with surrounding native cartilage is a major challenge for the success of cartilage tissue-engineering strategies. The purpose of this study is to investigate whether incorporation of the power of mesenchymal stem cell (MSC) sheet to MSCs-loaded bilayer poly-(lactic-co-glycolic acid) (PLGA) scaffolds can improve the integration and repair of cartilage defects in a rabbit model. METHODS: Rabbit bone marrow-derived MSCs were cultured and formed cell sheet. Full-thickness cylindrical osteochondral defects (4 mm in diameter, 3 mm in depth) were created in the patellar groove of 18 New Zealand white rabbits and the osteochondral defects were treated with PLGA scaffold (n = 6), PLGA/MSCs (n = 6) or MSC sheet-encapsulated PLGA/MSCs (n = 6). After 6 and 12 weeks, the integration and tissue response were evaluated histologically. RESULTS: The MSC sheet-encapsulated PLGA/MCSs group showed significantly more amounts of hyaline cartilage and higher histological scores than PLGA/MSCs group and PLGA group (P < 0.05). In addition, the MSC sheet-encapsulated PLGA/MCSs group showed the best integration between the repaired cartilage and surrounding normal cartilage and subchondral bone compared to other two groups. CONCLUSIONS: The novel method of incorporation of MSC sheet to PLGA/MCSs could enhance the ability of cartilage regeneration and integration between repair cartilage and the surrounding cartilage. Transplantation of autologous MSC sheet combined with traditional strategies or cartilage debris might provide therapeutic opportunities for improving cartilage regeneration and integration in humans.

Design and analysis of linear fault-tolerant permanent-magnet vernier machines.

This paper proposes a new linear fault-tolerant permanent-magnet (PM) vernier (LFTPMV) machine, which can offer high thrust by using the magnetic gear effect. Both PMs and windings of the proposed machine are on short mover, while the long stator is only manufactured from iron. Hence, the proposed machine is very suitable for long stroke system applications. The key of this machine is that the magnetizer splits the two movers with modular and complementary structures. Hence, the proposed machine offers improved symmetrical and sinusoidal back electromotive force waveform and reduced detent force. Furthermore, owing to the complementary structure, the proposed machine possesses favorable fault-tolerant capability, namely, independent phases. In particular, differing from the existing fault-tolerant machines, the proposed machine offers fault tolerance without sacrificing thrust density. This is because neither fault-tolerant teeth nor the flux-barriers are adopted. The electromagnetic characteristics of the proposed machine are analyzed using the time-stepping finite-element method, which verifies the effectiveness of the theoretical analysis.

A new design of facial artery perforator flaps for the reconstruction of small- to medium-sized intraoral defects.

AIM: The aim of this study was to investigate the reliability and outcomes of a new design of facial artery perforator flaps, extending from the angle of the mouth to the border of the mandible, for the reconstruction of small- to medium-sized intraoral defects. PATIENTS AND METHODS: The technique had been used in 23 patients between February 2009 and August 2012. The locations of intraoral defects included the tongue, the floor of the mouth, the inferior gingival mucosa, and the sublingual gland. All flaps were monitored for complications including skin loss and ischemia. The functions of appearance, swallowing, and speech were assessed 6 months after operation with the University of Washington Quality of Life Questionnaire. RESULTS: All flaps presented with satisfactory results except for one, which demonstrated superficial tip necrosis that settled after conservative treatment. The follow-up period ranged from 6 to 12 months, and 1 patient died as a result of pulmonary metastasis, and 3 patients underwent second surgery because of local tumor recurrence (2patients) and cervical recurrence (1 patient). Nineteen patients were assessed with the University of Washington Quality of Life Questionnaire, and the mean (SD) scores of appearance, swallowing, and speech were 57.89 (14.45), 83.68 (19.98), and 81.58 (23.16), respectively. CONCLUSIONS: This design of facial artery perforator flaps could provide an efficient and cost-effective method for reconstruction of small- to medium-sized intraoral defects with a low surgical morbidity and satisfactory levels of quality of life.