RESUMEN
This study investigated the use of partially set hydroxyapatite forming calcium phosphate cement as a carvable and mechanically stable bone substitute material. Hydroxyapatite-forming cements were made of either mechanically activated alpha-tricalcium phosphate or a mixture of tetracalcium phosphate and dicalcium phosphate anhydrous and setting was arrested up to 4 h post setting. The study showed that these partially set rigid samples of defined geometry could be carved into a desired shape when the degree of reaction was 30-40% and the relative porosity between 40 and 50%; samples are then expected to set completely after implantation in the presence of water or serum, having the same compressive strength as a continuously set calcium phosphate cement (up to 36 MPa). The development of compressive strength, phase composition, and crystallinity when varying production parameters of these partially "preset" bone substitute materials are presented for both cement systems.
Asunto(s)
Materiales Biocompatibles/química , Cementos para Huesos/química , Sustitutos de Huesos/química , Fosfatos de Calcio/química , Ensayo de Materiales , Animales , Fuerza Compresiva , Cristalografía , Humanos , Hidroxiapatitas/química , Prótesis e Implantes , Procedimientos de Cirugía Plástica , Propiedades de Superficie , Resistencia a la Tracción , Agua/químicaRESUMEN
Hydroxyapatite cements are used in reconstruction of the face; usually in well-defined cavities where the cement can be stabilized without the need for internal fixation. A hydroxyapatite cement that could enable screw fixation and some loading therefore has considerable potential in maxillofacial reconstruction. It has been demonstrated recently that water demand of calcium phosphate cements can be reduced by ionically modifying the liquid component. This study investigated the capacity of an ionically modified precompacted apatite cement to retain self-tapping cortical bone screws. Screw pullout forces were determined in the direction of the screw long axis and perpendicular to it, using cortical bone and polymethylmethacrylate cement as a control. In bending pullout tests, measured forces to remove screws from ionically modified precompacted cement were insignificantly different from cortical bone. However, pullout forces of bone screws from hydroxyapatite cement decreased with aging time in vitro.