Understanding the compaction behaviour of low-substituted HPC: macro, micro, and nano-metric evaluations.

The fast development in materials science has resulted in the emergence of new pharmaceutical materials with superior physical and mechanical properties. Low-substituted hydroxypropyl cellulose is an ether derivative of cellulose and is praised for its multi-functionality as a binder, disintegrant, film coating agent and as a suitable material for medical dressings. Nevertheless, very little is known about the compaction behaviour of this polymer. The aim of the current study was to evaluate the compaction and disintegration behaviour of four grades of L-HPC namely; LH32, LH21, LH11, and LHB1. The macrometric properties of the four powders were studied and the compaction behaviour was evaluated using the out-of-die method. LH11 and LH22 showed poor flow properties as the powders were dominated by fibrous particles with high aspect ratios, which reduced the powder flow. LH32 showed a weak compressibility profile and demonstrated a large elastic region, making it harder for this polymer to deform plastically. These findings are supported by AFM which revealed the high roughness of LH32 powder (100.09 ± 18.84 nm), resulting in small area of contact, but promoting mechanical interlocking. On the contrary, LH21 and LH11 powders had smooth surfaces which enabled larger contact area and higher adhesion forces of 21.01 ± 11.35 nN and 9.50 ± 5.78 nN, respectively. This promoted bond formation during compression as LH21 and LH11 powders had low strength yield.

Quercetin loaded cosm-nutraceutical electrospun composite nanofibers for acne alleviation: Preparation, characterization and experimental clinical appraisal.

In the cosmeceutical field, it is essential to develop topical delivery systems which would allow drugs to create a depot and permeate within the skin. The aim of the present study was to develop composite nanofibers of polyvinyl alcohol/quercetin/essential oils using the electrospinning technique, and assess their efficiency in acne alleviation. Quercetin was chosen due to its anti-inflammatory, anti-oxidant, and antibacterial activities. Nanofibers were characterized for their morphology, ex-vivo deposition/permeation, physical/mechanical integrity, thermal properties, and chemical characteristics. In addition, the anti-bacterial efficacy was tested on Propionibacterium acne (P. acne), and a cytotoxicity assay was carried out. Lastly, an experimental clinical trial was conducted on acne patients, where the percentage reduction of inflammatory, non-inflammatory and total acne lesions was taken as evaluation criterion. Results showed that quercetin was successfully loaded into the nanofibers which were homogenously dispersed. They showed a reasonable skin deposition percentage of 28.24% ± 0.012, a significantly higher antibacterial efficacy against Propionibacterium acne than quercetin alone, and were utterly safe on skin fibroblastic cells. Upon clinical examination on acne patients, the nanofibers showed 61.2%, 14.7%, and 52.9% reduction of inflammatory, comedonal, and total acne lesions respectively, suggesting a promising topical anti-acne delivery system.

The Impact of Natural and Synthetic Polymers in Formulating Micro and Nanoparticles for Anti-Diabetic Drugs.

Diabetes mellitus is one of the long-known chronic diseases. Today, over 400 million people have been diagnosed with diabetes, yet curing it is still a challenge. Over the decades, the approaches of treating diabetes mellitus have evolved and polymeric materials have played an integral part in developing and manufacturing anti-diabetic medications. However, injection of insulin remains a conventional therapy for the treatment of diabetes. Oral administration is generally the most preferred route; yet, physiological barriers lead to a challenge in the formulation development for oral delivery of antidiabetic peptide and protein drugs. This present review focuses on the role of different types of biodegradable polymers (e.g., synthetic and natural) that have been used to develop micro and nanoparticles based formulations for anti-diabetic drugs (Type 1 and Type 2) and how the various encapsulation strategies impact its therapeutic effect, including pharmacokinetics studies, drug release profiles, and efficacy of the encapsulated drugs. This review also includes studies of different dosage forms such as oral, nasal, inhalation, and sublingual for the treatment of diabetes that have been investigated using synthetic and natural biodegradable polymers in order to develop an alternative route to subcutaneous route for better control of serum glucose levels.

Adherence of Pseudomonas aeruginosa onto surfactant-laden contact lenses.

There is an immense research interest to utilise contact lens (CLs) as a popular platform for ocular drug delivery. However, CLs are the major predisposing factors of bacterial keratitis which is commonly caused by adhesion of microbes such as Pseudomonas aeruginosa and Staphylococcus epidermidis. The aim of the current study is to explore the effect of surfactants; Poloxamer 188, Polysorbate 80 and Tetronic® 90R4 (at 0.25% - 3% v/v) on the characteristics of CLs and on the adhesion abilities of Pseudomonas aeruginosa to the lenses' surfaces. CLs were formulated using a hydrophilic monomer; 2-hydroxyethyl methacrylate (HEMA) together with silicone-based polymer such as Poly dimethyl siloxane (PDMS) or 3,3,3-trifluoropropylsilane (FSA) then lenses were polymerized under UV light. The formulated CLs with surfactants were found to have an increased equilibrium water content (EWC) due to hydrophilic moiety present in surfactants. A relationship was deduced between EWC and surface contact angle of lenses containing surfactants; where an increased EWC was associated with a decrease in contact angle reflecting a more hydrophilic surfaces of CLs. Apart from the 3% Polysorbate 80 (p < .0001) CLs, all other formulations had light transmission values over 80%. Lenses with surfactants were found to have lower bacterial ATP concentration than lenses without surfactants. Poloxamer 188 in FSA lenses reduced bacterial adhesion from 4.22 × 10-4 ±â€¯1.30 × 10-4 pM to 1.03 × 10-4 ±â€¯4.86 × 10-5 pM, a reduction by 75.59% when compared to the control lenses (p = .002). Moreover, 1% Tetronic® 90R4 in PDMS showed a reduction by 57.17% in ATP concentration. Polysorbate 80 in FSA exhibited the least bacterial adhesion with an average bacterial ATP concentration of 3.85 × 10-5 ±â€¯2.61 × 10-5 pM; i.e 90.88% less bacterial ATP than control lenses (p = .001). Bioluminescence studies demonstrated a decrease in Pseudomonas aeruginosa adhesion to CLs containing surfactants without impairing the optical and mechanical characteristics of the lenses.

Fatty acid microemulsion for the treatment of neonatal conjunctivitis: quantification, characterisation and evaluation of antimicrobial activity.

Fatty acids (FAs) are used by many organisms as defence mechanism against virulent bacteria. The high safety profile and broad spectrum of activity make them potential alternatives to currently used topical antibiotics for the treatment of eye infections in neonates. The current study utilised a Design of Experiment approach to optimise the quantification of five fatty acids namely; lauric acid, tridecanoic acid, myristoleic acid, palmitoleic acid and α-linolenic acid. The significance of the influence of the experimental parameters such as volume of catalyst, volume of n-hexane, incubation temperature, incubation time and the number of extraction steps on derivatisation was established by statistical screening with a factorial approach. Derivatisation was confirmed using attenuated total reflectance infrared (ATR) and 1H NMR spectrum. A gas chromatographic method (GC-FID) was developed and validated according to ICH guidelines for the identification and quantification of fatty acids. The results were found to be linear over the concentration range studied with coefficient of variation greater than 0.99 and high recovery values and low intra-day and inter-day variation values for all FAs. Then, different α-linolenic acid-based microemulsions (MEs) were prepared using Tween 80 as surfactant, polyethylene glycol 400 (PEG 400) as co surfactant and water as aqueous phase. The developed GC method was used to quantify the FA content in ME formulations. The results indicated that the developed GC method is very effective to quantify the FA content in the ME formulations. The antimicrobial efficacy of FA-based MEs were tested against Staphylococcus aureus. It was concluded that the FA-based MEs have strong antimicrobial effect against S. aureus.

New Generation of Orally Disintegrating Tablets for Sustained Drug Release: A Propitious Outlook.

Orally disintegrating tablets (ODTs) or orodispersible tablets are solid dosage forms that disintegrate within 3 minutes in the mouth into a paste that can be easily swallowed. ODTs have improved over the past years, in an attempt to produce a safe and efficient substitute to the conventional oral dosage forms, particularly for dysphagia patients. Since its introduction in the market in the 1980s, ODTs expanded rapidly and achieved revenues over $3 billion in 2006 and sustaining 20% annual growth. It is therefore evident that ODTs carry good commercial value, however there is potential for improvement. Current sustained-release technologies may be exploited and incorporated into an ODT to provide greater therapeutic value by reducing the need for multiple daily dosing regimens and improving patient adherence. A number of technologies such as polymer coated nanoparticles, stimuli-responsive polymers and ion-exchange resins have emerged to produce robust, sustained release orally disintegrating tablets (SR-ODT). The purpose of this review is to highlight these various approaches and techniques and how they have been utilised in an ODT formulation to extend differentiated line, market exclusivity and patent life. The review also explores future perspective and the potential challenges that SR-ODTs will face.

Contact lenses as drug reservoirs & delivery systems: the successes & challenges.

Although conventional eye drops comprise over 90% of the marketed ocular dosage forms, they do have limitations, such as poor ocular drug bioavailability and systemic side effects; contact lenses are amongst the new delivery systems and devices that could overcome some of these problems. The most common approach to load drug molecules into contact lenses includes soaking in a drug solution. This approach had some success, but failed to achieve controlled/sustained drug release to the eye. On [corrected] the other hand, nanoreservoir systems comprising nanoparticles, cyclodextrins, liposomes or surfactant aggregates being incorporated into the contact lenses could offer a plausible solution. This review highlights the status quo with contact lenses as ocular drug-delivery carriers and identifies possible future directions.

Systems biology approach to study permeability of paracetamol and its solid dispersion.

Physiological changes that take place at cellular level are usually reflective of their level of gene expression. Different formulation excipients have an impact on physiological behavior of the exposed cells and in turn affect transporter genes, enterocyte-mediated metabolism and toxicity biomarkers. The aim of this study was to prepare solid dispersion of paracetamol and evaluate genetic changes that occur in Caco-2 cell lines during the permeability of paracetamol alone and paracetamol solid dispersion formulations. Paracetamol-PEG 8000 solid dispersion was prepared by melt fusion method and the formulation was characterised using differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Formulation of solid dispersion resulted in the conversion of crystalline drug into an amorphous form. Permeability studies showed that paracetamol absorption was higher from the solid dispersion formulation. DNA microarrays analysis was carried out in order to investigate the involvement of any efflux/uptake transporters in paracetamol or its solid dispersion permeability. Neither transporter carriers nor efflux proteins were found to be involved in the absorption of paracetamol or its PEG solid dispersion. Gene expression analysis established that paracetamol toxicity was potentially reduced upon formulation into solid dispersion when ATP binding cassette (ABC) and solute carrier transporter (SLC) genes were analyzed.