Biochemical and immunohistochemical analysis of tissue inhibitor of metalloproteinases-1 in human sound dentin.

OBJECTIVES: Matrix metalloproteases (MMPs) are a family of enzymes that operate a proteolytic activity at the level of the extracellular matrix. MMPs are regulated by tissue inhibitors of metalloproteinases (TIMPs) that can ubiquitously bind different enzyme forms. The study aims to identify a morfo-functional association between TIMP-1 and MMP-2 and -9 in human dentin. MATERIALS AND METHODS: Proteins were extracted from demineralized human sound dentin powder and centrifuged to separate two aliquots with different molecular weights of proteins, higher and lower than 30 kDa. In each aliquot, the evaluation of the presence of TIMP-1/MMP-2 and TIMP-1/MMP-9 was performed using co-immunoprecipitation/immunoblotting analysis. The distribution of TIMP-1, in association with MMP-2 and -9, was investigated using a double immunohistochemical technique. Furthermore, the activity of TIMP-1 was measured by reverse zymography, where acrylamide gel was copolymerized with gelatin and recombinant MMP-2. RESULTS: Co-immunoprecipitation/immunoblotting analysis showed the association TIMP-1/MMP-2 and TIMP-1/MMP-9 in human sound dentin. Electron microscopy evaluation revealed a diffuse presence of TIMP-1 tightly associated with MMP-2 and -9. Reverse zymography analysis confirmed that TIMP-1 present in human dentin is active and can bind different MMPs isoforms. CONCLUSIONS: The strict association of TIMP-1 with MMP-2 and -9 in situ appeared a constant finding in the human sound dentin. CLINICAL RELEVANCE: Considering the role of TIMP-1, MMP-2, and MMP-9 within the connective tissues, clinically applicable protocols could be developed in the future to increase or decrease the level of TIMPs in human dentin to regulate the activity of MMPs, contributing to reduce caries progression and collagen degradation.

HIF1α protein and mRNA expression as a new marker for post mortem interval estimation in human gingival tissue.

Estimating the post mortem interval (PMI) is still a crucial step in Forensic Pathology. Although several methods are available for assessing the PMI, a precise estimation is still quite unreliable and can be inaccurate. The present study aimed to investigate the immunohistochemical distribution and mRNA expression of hypoxia inducible factor (HIF-1α) in post mortem gingival tissues to establish a correlation between the presence of HIF-1α and the time since death, with the final goal of achieving a more accurate PMI estimation. Samples of gingival tissues were obtained from 10 cadavers at different PMIs (1-3 days, 4-5 days and 8-9 days), and were processed for immunohistochemistry and quantitative reverse transcription-polymerase chain reaction. The results showed a time-dependent correlation of HIF-1α protein and its mRNA with different times since death, which suggests that HIF-1α is a potential marker for PMI estimation. The results showed a high HIF-1α protein signal that was mainly localized in the stratum basale of the oral mucosa in samples collected at a short PMI (1-3 days). It gradually decreased in samples collected at a medium PMI (4-5 days), but it was not detected in samples collected at a long PMI (8-9 days). These results are in agreement with the mRNA data. These data indicate an interesting potential utility of Forensic Anatomy-based techniques, such as immunohistochemistry, as important complementary tools to be used in forensic investigations.

Novel PLA microspheres with hydrophilic and bioadhesive surfaces for the controlled delivery of fenretinide.

Novel polylactide (PLA) microspheres endowed with hydrophilic and bioadhesive surfaces as injectable formulations for the controlled release of fenretinide were prepared, using a novel technique based on the co-precipitation of PLA with gelatin, at the interface of a liquid dispersion formed by the addition of N-methylpyrrolidone containing PLA and dextrin (DX), towards an aqueous solution of gelatin (G). The resulting PLA-G-DX microspheres were compared with others prepared by the same technique using polylactide-co-glycolide (PLGA), with or without DX, and with or without phosphatidylcholine. Of the different systems, the PLA-G-DX microspheres had the best morphological, dimensional and functional characteristics. They had the highest drug loading, and their drug release was the most efficient over time without any burst effect. Their in vitro anti-tumoural activity was strongly enhanced with respect to the pure fenretinide. This paralleled the increased drug concentration inside the cells due to their marked bioadhesion to the tumour cell membranes as indicated by scanning electron microscope images.

Influence of preliminary etching on the stability of bonds created by one-step self-etch bonding systems.

We evaluated the effects of preliminary etching of dentine on the stability of the bond created by one-step self-etch adhesives under different storage conditions. Adper Easy Bond (3M ESPE) and iBond Self-Etch (iBond SE; Heraeus Kulzer) were applied with an etch-and-rinse (i.e. after preliminary phosphoric acid etching for 15 s) or a self-etch approach. Resin-dentine bonded specimens were sectioned perpendicularly to the adhesive interface according to the 'non-trimming technique'. Beams were stored in artificial saliva for 24 h, 6 months, or 1 yr at 37°C, or in 10% NaOCl for 5 h at room temperature, and then stressed until failure; the microtensile bond strengths were calculated. Interfacial nanoleakage of additional teeth was evaluated using light microscopy or transmission electron microscopy. Adper Easy Bond showed higher bond strength than iBond SE, regardless of the dentine treatment. Similar microtensile bond strength results were obtained for teeth subjected to artificial ageing in 10% NaOCl for 5 h at room temperature and for teeth stored in artificial saliva for 6 months at 37°C. The additional etching step increased the microtensile bond strength for Adper Easy Bond and iBond SE. This study supports the use of one-step adhesives on etched dentine because of the increased bond strength compared with their application onto smear-layer-covered dentine, regardless of storage conditions.

Novel micelles based on amphiphilic branched PEG as carriers for fenretinide.

This study reports on the preparation and evaluation of amphiphilic macromolecules based on branched polyethylene glycol covalently linked with alkyl hydrocarbon chains. These macromolecules easily dissolved in an aqueous environment, with formation of micellar nanoaggregates endowed with hydrophobic inner cores capable of hosting fenretinide by complexation. The complexes increased fenretinide aqueous solubility, while hindering its release as a free drug in an aqueous environment. Particle size analysis indicated dimensional suitability of the complexes for intravenous administration. Neuroblastoma cell lines (SH-SY5Y and NGP) exhibited increased sensitivity to fenretinide in complex as compared to free drug, associated with higher intracellular concentrations of fenretinide observed after treatment with the complex. Transmission electronic microscopy images revealed endocytosis of the micellar complex. Moreover, fenretinide conversion to its metabolite 4-oxo-fenretinide was delayed in cells treated with the complex, further supporting the hypothesis that fenretinide may be absorbed by micellar transport and exposed to the cytoplasm for conversion to its metabolite only after micelle destabilization.

Suppression of procollagen {alpha}1 type 1 by long-term low-dose exposure to 2-hydroxyethylmethacrylate in human gingival fibroblasts in vitro.

The purpose of this study was to evaluate the cytotoxicity of low doses and long-term exposure to 2-hydroxyethylmethacrylate (HEMA) on the protein expression of human gingival fibroblasts (HGFs). Human gingival fibroblasts were exposed to different concentrations of HEMA ranging from 0.5 mmol/L to 3 mmol/L for periods of time from 72 hours to 2 weeks. A significant decrease in the expression of procollagen α1 type I protein was observed 72 hours after treatment of cells with 3 mmol/L HEMA. Although low concentrations of the monomer after 2 weeks of exposure to HEMA did not appear to induce any marked changes in the morphology or viability of cells, the expression of procollagen α1 type I protein and its messenger RNA (mRNA) markedly decreased. In conclusion, our data demonstrated that cell viability and morphology assays could be deficient parameters in evaluating the biocompatibility of dental resin materials.

Osteoblastic Differentiation on Graphene Oxide-Functionalized Titanium Surfaces: An In Vitro Study.

BACKGROUND: Titanium implant surfaces are continuously modified to improve biocompatibility and to promote osteointegration. Graphene oxide (GO) has been successfully used to ameliorate biomaterial performances, in terms of implant integration with host tissue. The aim of this study is to evaluate the Dental Pulp Stem Cells (DPSCs) viability, cytotoxic response, and osteogenic differentiation capability in the presence of GO-coated titanium surfaces. METHODS: Two titanium discs types, machined (control, Crtl) and sandblasted and acid-etched (test, Test) discs, were covalently functionalized with GO. The ability of the GO-functionalized substrates to allow the proliferation and differentiation of DPSCs, as well as their cytotoxic potential, were assessed. RESULTS: The functionalization procedures provide a homogeneous coating with GO of the titanium surface in both control and test substrates, with unchanged surface roughness with respect to the untreated surfaces. All samples show the deposition of extracellular matrix, more pronounced in the test and GO-functionalized test discs. GO-functionalized test samples evidenced a significant viability, with no cytotoxic response and a remarkable early stage proliferation of DPSCs cells, followed by their successful differentiation into osteoblasts. CONCLUSIONS: The described protocol of GO-functionalization provides a novel not cytotoxic biomaterial that is able to stimulate cell viability and that better and more quickly induces osteogenic differentiation with respect to simple titanium discs. Our findings pave the way to exploit this GO-functionalization protocol for the production of novel dental implant materials that display improved integration with the host tissue.

Expression of procollagen alpha1 type I and tenascin proteins induced by HEMA in human pulp fibroblasts.

In the dental pulp extracellular matrix, the main macromolecules are collagenous proteins, non-collagenous proteins and proteoglycans. Regulated synthesis of the interstitial collagens, in particular, type I collagen, is important during development and wound healing but also in a number of pathological conditions. Tenascin is also a matrix protein highly expressed during development while it decreases in mature organs. Under pathological conditions such as infections and inflammation, during tumorigenesis and mechanical stress applied to cells in culture or tissue in vivo, the expression of tenascin is increased. In this study, HEMA, widely used in dentistry, ophthalmology and drug delivery, has been used to study its influence on the expression of procollagen alpha1 type I and tenascin proteins in the primary cultures of human pulp fibroblasts. Different concentrations of the resin monomer and different times of exposition were tested. The influence of HEMA on the cell viability was evaluated by means of an MTT assay while immunofluorescence and western blotting analysis were performed to detect possible interference with the presence and the synthesis of these proteins. We observed a strong reduction in cell viability in specimens treated for 96 h and 168 h, especially at concentrations of 1 and 3 mmol/L HEMA. Both immunofluorescence and western blotting analysis demonstrated a reduction of procollagen alpha1 type I protein and an overexpression of tenascin protein. Our results showed that long-term exposure and low concentrations of HEMA influence normal cell activity, such as the synthesis of some of the dental pulp extracellular matrix proteins.

The Hypoxia-Mimetic Agent Cobalt Chloride Differently Affects Human Mesenchymal Stem Cells in Their Chondrogenic Potential.

Adult stem cells are a promising cell source for cartilage regeneration. They resided in a special microenvironment known as the stem-cell niche, characterized by the presence of low oxygen concentration. Cobalt chloride (CoCl2) imitates hypoxia in vitro by stabilizing hypoxia-inducible factor-alpha (HIF-1α), which is the master regulator in the cellular adaptive response to hypoxia. In this study, the influence of CoCl2 on the chondrogenic potential of human MSCs, isolated from dental pulp, umbilical cord, and adipose tissue, was investigated. Cells were treated with concentrations of CoCl2 ranging from 50 to 400 µM. Cell viability, HIF-1α protein synthesis, and the expression of the chondrogenic markers were analyzed. The results showed that the CoCl2 supplementation had no effect on cell viability, while the upregulation of chondrogenic markers such as SOX9, COL2A1, VCAN, and ACAN was dependent on the cellular source. This study shows that hypoxia, induced by CoCl2 treatment, can differently influence the behavior of MSCs, isolated from different sources, in their chondrogenic potential. These findings should be taken into consideration in the treatment of cartilage repair and regeneration based on stem cell therapies.

Electric device improves bonds of simplified etch-and-rinse adhesives.

OBJECTIVES: This study investigated the effects of an electric field produced by a new device for the application of etch-and-rinse adhesives on demineralized dentin surfaces. METHODS: Three simplified etch-and-rinse adhesives (Single Bond, Prime&Bond NT and One-Step) were applied with the electric device and compared with controls prepared with disposable sponges. Specimens were processed for microtensile bond strength test and nanoleakage investigation using high resolution SEM. RESULTS: Microtensile testing revealed higher bond strengths (p<0.05) for all adhesives tested when electricity was used. Adhesive interfaces prepared with electric impulses exhibited very homogenous hybrid layers with minimal nanoleakage compared with the controls. SIGNIFICANCE: The use of electricity produced by a new electronic device during the application of dentin adhesives may increase adhesive adaptation to the dentin substrate and improve dentin hybridization due to the substrate modifications induced by an electric field on the demineralized dentin organic matrix.

Thixotropic Peptide-Based Physical Hydrogels Applied to Three-Dimensional Cell Culture.

Pseudopeptides containing the d-Oxd or the d-pGlu [Oxd = (4R,5S)-4-methyl-5-carboxyl-oxazolidin-2-one, pGlu = pyroglutamic acid] moiety and selected amino acids were used as low-molecular-weight gelators to prepare strong and thixotropic hydrogels at physiological pH. The addition of calcium chloride to the gelator solutions induces the formation of insoluble salts that get organized in fibers at a pH close to the physiological one. Physical characterization of hydrogels was carried out by morphologic evaluation and rheological measurements and demonstrated that the analyzed hydrogels are thixotropic, as they have the capability to recover their gel-like behavior. As these hydrogels are easily injectable and may be used for regenerative medicine, they were biologically assessed by cell seeding and viability tests. Human gingival fibroblasts were embedded in 2% hydrogels; all of the hydrogels allow the growth of encapsulated cells with a very good viability. The gelator toxicity may be correlated with their tendency to self-assemble and is totally absent when the hydrogel is formed.

HEMA but not TEGDMA induces autophagy in human gingival fibroblasts.

Polymerized resin-based materials are successfully used in restorative dentistry. Despite their growing popularity, one drawback is the release of monomers from the polymerized matrix due to an incomplete polymerization or degradation processes. Released monomers are responsible for several adverse effects in the surrounding biological tissues, inducing high levels of oxidative stress. Reactive oxygen species are important signaling molecules that regulate many signal-trasduction pathways and play critical roles in cell survival, death, and immune defenses. Reactive oxygen species were recently shown to activate autophagy as a mechanism of cell survival and cell death. Although the toxicity induced by dental resin monomers is widely studied, the cellular mechanisms underlying these phenomena are still unknown. The aim of the study was to investigate the behavior of human gingival cells exposed to 2-hydroxy-ethyl methacrylate (HEMA) and triethylene glycol dimethacrylate (TEGDMA) to better elucidate the mechanisms of cell survival and cell death induced by resin monomers. Primary culture of human gingival cells were exposed to 3 mmol/L of HEMA or 3 mmol/L of TEGDMA for 24, 48, and 72 h. Morphological investigations were performed by transmission electron microscopy to analyze the ultrastructure of cells exposed to the monomers. The expression of protein markers for apoptosis (caspase - 3 and PARP) and autophagy (beclin - 1 and LC3B I/II) were analyzed by western blot to investigate the influence of dental resin monomers on mechanisms underlying cell death. Results showed that HEMA treatment clearly induced autophagy followed by apoptosis while the lack of any sign of autophagy activation is observed in HGFs exposed to TEGDMA. These data indicate that cells respond to monomer-induced stress by the differential induction of adaptive mechanisms to maintain cellular homeostasis.

Immunocytochemical identification of type I collagen in acid-etched dentin.

The hypothesis tested in this study is that the application of phosphoric acid prevents collagen fibrils (CF) from maintaining their structural morphology, as assessed by their immunochemical antigenicity. Dentin was conditioned with EDTA and with 35% H3PO4 for 15, 30, and 60 s. For a control there was no treatment. A pre-embedding immunohistochemical procedure was evaluated under high-resolution SEM and a postembedding immunolocalization technique was performed on ultrathin sections at TEM level. Conditioning with EDTA resulted in a weaker labeling signal than for dentin conditioned with H3PO4. The most intense labeling was observed after dentin had been etched with H3PO4 for 15 s. The least intensive labeling was evident when the acid was applied for 30 s or for 60 s. A very weak signal was detected on the untreated dentin surface. These results provide evidence that a 15-s application of 35% H3PO4 causes mineral dissolution of the crystals enveloping the superficial CF without damaging the ultrastructure of the CF while longer applications of 35% H3PO4 cause alterations in the CF that decrease their antigenicity.

High resolution SEM evaluation of dentin etched with maleic and citric acid.

OBJECTIVES: This study evaluated the ultra-morphological effects of maleic and citric acid on human dentin by means of a field emission in-lens scanning electron microscope (FEISEM). Both acids were tested on human dentin at pH 0.7 and 1.4 in aqueous solutions. METHODS: Each of 12 dentin disks were divided into four groups and exposed to either maleic acid at pH 0.7, maleic acid at pH 1.4, citric acid at pH 0.7 and citric acid at pH 1.4. All samples were then fixed and dehydrated in a critical point drying apparatus. Observations were carried out by means of a FEISEM (JEOL 890) after coating with a carbon-platinum film. RESULTS: Both acids removed smear layer and partially removed smear plugs. Details of fine structures measuring from 5 to 15 nm were shown on the intertubular demineralized dentin. Maleic acid at pH 0.7 showed the highest depth of demineralization of all the tested samples; citric acid, showed a higher depth of demineralization values when tested at pH 1.4 than at pH 0.7. SIGNIFICANCE: The FEISEM reveals ultra-structural aspects of the demineralization process of the dentin tissue of the both acids tested. Differences related to the pH of the acids were found. Images obtained at high magnification clarify the dentin collagen structure of both peritubular and intertubular dentin. Small periodic structures associated with collagen fibrils were also imagined.

Ultra-morphology of self-etching adhesives on ground enamel: a high resolution SEM study.

PURPOSE: To evaluate the effect of different commercial self-etching agents on enamel morphology using high-resolution in-lens scanning electron microscopy (FEISEM). METHODS: The bonding systems selected for the study were: Prime & Bond NT (no-etch technique), Prime & Bond 2.1 (no-etch technique), NRC/Prime and Bond NT, Syntac Single Component, Prompt L-Pop, F2000, and Clearfil SE Bond. The positive control group was prepared with Single Bond upon etching enamel with the proprietary 35% phosphoric acid gel. 24 extracted human molars were equally and randomly assigned to the experimental and control groups. All bonding materials were applied on enamel following the manufacturers' instructions. A thin layer of composite was applied on the polymerized adhesive agent, after which the enamel was dissolved to obtain replicas that were observed under a FEISEM. RESULTS: Observations revealed different morphological features brought about by the adhesive systems. A relationship between the morphological appearance and the pH of the adhesive solutions was found. Three different groups of self etching were identified: Group 1 showed no or little evidence of modifications on the enamel surface (Prime & Bond NT and Prime & Bond 2.1, no-etch technique), Group 2 revealed major aggressive properties that were able to disclose the prism morphology (Syntac Single Component, F2000, Clearfil SE Bond), and Group 3 (NRC/Prime & Bond NT and Prompt L-Pop) revealed morphological features similar to those obtained with Single Bond after etching with phosphoric acid (control group).

Characterization and cytocompatibility of an antibiotic/chitosan/cyclodextrins nanocoating on titanium implants.

A novel ciprofloxacin loaded chitosan nanoparticle-based coating onto titanium substrates has been developed and characterized to obtain an orthopaedic implant surface able to in situ release the antibiotic for the prevention of post-operative infections. Ciprofloxacin loaded chitosan nanoparticles were obtained using the combination of sulfobutyl ether-beta-cyclodextrin and gamma-cyclodextrin. The resulting nanoparticulate system was characterized by TEM, HPLC and XPS. Particle size was in the range 426-552 nm and zeta potential values were around +30 mV. This antibacterial coating was able to in vitro inhibit two nosocomial Staphylococcus aureus strains growth, with a reduction of about 20 times compared to controls. No impairment in MG63 osteoblast-like cells viability, adhesion and gene expression were detected at 48 h, 7 and 14 days of culture. Overall, the investigated coating represents a promising candidate for the development of a new antibiotic carrier for titanium implants.

Cytotoxic activity of guaiazulene on gingival fibroblasts and the influence of light exposure on guaiazulene-induced cell death.

Guaiazulene (GA) is widely used as a natural ingredient in many health care products and solutions. Although it has been reported to have interesting biological effects, GA and azulene derivatives have been proven to be cytotoxic against normal human cells and human tumor cells; moreover, guaiazulene has shown photomutagenic properties on bacterial strains. Therefore, we evaluated and compared the cytotoxicity of GA at different concentrations on human gingival fibroblast (HGF) cell cultures under normal conditions and under UV irradiation (UV-A dose: 6.4 J/cm(2)). The compound tested was found to significantly reduce cell viability (dose-dependent trend, IC(50) 72.1 µM), decrease protein procollagen α1 type I synthesis, a marker for HGF protein, and COL1A1 mRNA expression. The cytotoxic effects were accompanied by activation of an intrinsic apoptotic pathway, studied using transmission electron microscopy (TEM) and caspase-3 activation. The light exposure of the cell culture treated decreased GA-induced cell death (IC(50) 128.9 µM), suggesting a photoprotective effect due to the photodegradation of the toxic agent, guaiazulene. Furthermore, the products of the photodegradation reaction of GA proved not to be toxic against HGFs.

Matrix metalloproteinase-2 expression induced by two different adhesive systems on human pulp fibroblasts.

INTRODUCTION: This study evaluated the expression of matrix metalloproteinase-2 (MMP-2) in primary cultures of human pulp fibroblasts (HPFs) when exposed to extracts from dentin-bonding systems. METHODS: Polymerized resin disks of the bonding agent of a 2-step self-etch adhesive (TechBond, Isasan, Rovello Porro, Italy) or of the primer/bonding agent a 2-step etch-and-rinse adhesive (Optibond Solo; Sybron-Kerr, Orange, CA) were immersed in HPF culture medium for 24 or 96 hours. HPFs were incubated in the adhesive-conditioned or control (untreated) culture medium for 24 hours. Western blot and immunofluorescence analyses were performed to assay MMP-2 expression. RESULTS: MMP-2 expression levels in HPFs cultured for 24 hours in culture medium were similar in both the control and experimental media groups showing a faint band at 67 kDa. Conversely, the HPFs incubated in the medium that contain polymerized resin disks for 96 hours showed increased MMP-2 expression compared with the untreated medium. The self-etch adhesive displayed the most pronounced induction of MMP-2 expression. These findings were confirmed by immunofluorescence analysis. CONCLUSIONS: HPFs display increased MMP-2 expression after 96 hours of conditioning of the HPF culture medium with polymerized disks of dentin bonding systems. This MMP-2 expression/activation may represent a defence mechanism exhibited by HPFs towards monomers eluted from the dentin bonding systems.

Neuroprotective effects of cyanidin 3-O-glucopyranoside on amyloid beta (25-35) oligomer-induced toxicity.

Recent studies suggest that the oligomers of short amyloid beta (Abeta) peptides such as Abeta(25-35) as well as full-length Abeta peptides (i.e. Abeta(1-40) and Abeta(1-42) peptides) are responsible for synaptic dysfunction and/or neuronal loss in Alzheimer's disease (AD). Among antioxidant phytochemicals derived from fruit and vegetables, cyanidin 3-O-glucoside (Cy-3G) has recently gained attention for its neuroprotective properties. In this in vitro study, we demonstrated that Cy-3G can inhibit Abeta(25-35) spontaneous aggregation into oligomers and their neurotoxicity in human neuronal SH-SY5Y cells. In particular, the pre- and co-treatment of SH-SY5Y cells with Cy-3G reduced the neuronal death, in terms of apoptosis and necrosis, elicited by Abeta(25-35) oligomers. Cy-3G also shows the interesting ability to prevent the early events leading to neuronal death such as the Abeta(25-35) oligomer binding to plasma membrane and the subsequent membrane integrity loss. Taken together, these findings suggest that Cy-3G may be considered a phytochemical with neuroprotective properties useful in finding potential drug or food supplements for the therapy of AD.

HEMA down-regulates procollagen alpha1 type I in human gingival fibroblasts.

2-Hydroxyethyl methacrylate (HEMA) can be released from restorative materials and diffused into the tooth pulp over long periods of time. Although cytotoxicity due to high concentrations of monomers has been well studied, little is known about the risk of chronic toxicity resulting from low concentrations. The purpose of the study was to evaluate the effects of a minor toxic concentration of HEMA in the synthesis and expression of procollagen alpha1 type I produced by human gingival fibroblasts (HGF). HGF were exposed to 3 mM HEMA from 24 to 96 h. An MTT assay was performed to evaluate cell viability while reverse-transcriptase polymerase chain reaction (RT-PCR), real-time polymerase chain reaction (real-time PCR), and Western-blot analysis were carried out to evaluate the variability in the expression and synthesis of procollagen alpha1. Immunofluorescence was performed to detect the protein inside the cells. The results showed that there was a strong reduction of procollagen alpha 1 type I expression at 72 and 96 h. These findings demonstrate that, even if it does not reduce cell viability, 3 mM HEMA interferes both with the synthesis of the procollagen alpha 1 type I protein and its mRNA expression, suggesting that normal cell production and activity are modified by HEMA at concentrations below those which cause acute cytotoxicity.