In Vivo and In Vitro Fibroblasts' Behavior and Capsular Formation in Correlation with Smooth and Textured Silicone Surfaces.

BACKGROUND: As the most principal complication following breast augmentation with silicone breast implants, capsular contracture is greatly influenced by surface texture. However, there have long been widespread debates on the function of smooth or textured surface implants in reducing capsular contracture. MATERIALS AND METHODS: Three commercially available silicone breast implants with smooth and textured surfaces were subjected to surface characterization, and in vitro and in vivo assessments were then implemented to investigate the effect of these different surfaces on the biological behaviors of fibroblasts and capsular formation in rat models. RESULTS: Surface characterization demonstrated that all three samples were hydrophobic with distinct roughness values. Comparing the interactions of fibroblasts or tissues with different surfaces, we observed that as surface roughness increased, the adhesion and cell spreading of fibroblasts, the level of echogenicity, the density of collagen and α-SMA-positive immunoreactivity decreased, while the proliferation of fibroblasts and capsule thickness increased. CONCLUSIONS: Our findings elucidated that the effect of silicone implant surface texture on fibroblasts' behaviors and capsular formation was associated with variations in surface roughness, and the number of myofibroblasts may have a more significant influence on the process of contracture than capsule thickness in the early stage of capsular formation. These results highlight that targeting myofibroblasts may be wielded in the prevention and treatment strategies of capsular contracture clinically. LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Autologous Vascularization: A Method to Enhance the Antibacterial Adhesion Properties of ePTFE.

BACKGROUND: Expanded polytetrafluoroethylene (ePTFE), an ideal bioimplant material, is commonly used in surgical repair to treat soft tissue defects and deformities. However, the main disadvantage of ePTFE is that its distinctive porous ultrastructure is prone to bacterial adhesion that gives rise to infection and chronic inflammation, resulting in functional failure. Herein, a potentially promising approach to ePTFE autologous vascularization (AV-ePTFE) in vivo was established and developed to enhance the material's antibacterial properties. METHODS: Hematoxylin and eosin (H&E) staining and visual observation were performed to validate the intensity of the inflammatory response and related histological changes in surgical wounds after AV-ePTFE implantation. In addition, the antibacterial activities of AV-ePTFE were assessed by an in vitro bacterial adhesion assay and scanning electron microscope observation. RESULTS: The optimal time point of AV-ePTFE was 12 weeks after implantation. AV-ePTFE relieved inflammation based on an inflammation grading evaluation and expedited wound healing. Furthermore, AV-ePTFE effectively reduced the number of bacterial adhesions, inhibited bacterial biofilm formation, and prevented the occurrence of infection. CONCLUSIONS: We conclude that autologous vascularization is an effective method to improve the antibacterial adhesion properties and biocompatibility of ePTFE after implantation and that it may have a significant effect on clinical application of future porous biomaterials.

Surface changes of nanotopography by carbon ion implantation to enhance the biocompatibility of silicone rubber: an in vitro study of the optimum ion fluence and adsorbed protein.

Lower cellular adhesion and dense fibrous capsule formation around silicone breast implants caused by lower biocompatibility is a serious clinical problem. Preliminary work has shown that ion implantation enhances cell adhesion. Whether the biocompatibility is further enhanced by higher doses of carbon ion implantation and the mechanism by which ion implantation enhances biocompatibility remain unclear. In this study, five doses of carbon ions, which gradually increase, were implanted on the surface of silicone rubber and then the surface characteristics were surveyed. Then, cell adhesion, proliferation and migration were investigated. Furthermore, the vitronectin (VN) protein was used as a model protein to investigate whether the ion implantation affected the adsorbed protein on the surface. The obtained results indicate that enhanced cytocompatibility is dose dependent when the doses of ion implantation are less than 1 × 1016 ions/cm2. However, when the doses of ion implantation are more than 1 × 1016 ions/cm2, enhanced cytocompatibility is not significant. In addition, surface physicochemical changes by ion implantation induced a conformational change of the adsorbed vitronectin protein that enhanced cytocompatibility. Together, these results suggest that the optimum value of carbon ion implantation in silicone rubber to enhance biocompatibility is 1 × 1016 ions/cm2, and ion implantation regulates conformational changes of adsorbed ECM proteins, such as VN, and mediates the expression of intracellular signals that enhance the biocompatibility of silicone rubber. The results herein provide new insights into the surface modification of implant polymer materials to enhance biocompatibility. It has potentially broad applications in the biomedical field.

Complications from Nasolabial Fold Injection of Calcium Hydroxylapatite for Facial Soft-Tissue Augmentation: A Systematic Review and Meta-Analysis.

BACKGROUND: Despite its increasing usage of facial applications, there is a paucity of objective data regarding calcium hydroxylapatite (CaHA). OBJECTIVES: To systematically evaluate the complications from CaHA injection for facial soft tissue augmentation. METHODS: Published studies on CaHA injection for facial soft tissue enhancement were identified through searches of the PubMed, EMBASE, and Cochrane Controlled Trial databases. Only randomized, controlled trials comparing CaHA injection to either placebo or an active comparator for facial cosmetic use were included. The outcome measures were the count (n) and frequency (%) of each complication, including edema (swelling), erythema (redness), ecchymosis (bruising), pain, pruritus (itching), hematomas, nodules, and extrusions. RESULTS: Four studies on nasolabial fold (NLF) injection of CaHA consisting of two subgroups were included: (i) a CaHA-lidocaine vs CaHA subgroup and (ii) a CaHA vs hyaluronic acid (HA) subgroup. The addition of lidocaine to CaHA therapy displayed no significant effect on edema (RR (95% CI): 1.07 (0.94-1.21), P = .311), erythema (RR (95% CI): 0.91 (0.66-1.24), P = .544), ecchymosis (RR (95% CI): 1.04 (0.71-1.52), P = .843), pain (RR (95% CI): 0.88 (0.58-1.33), P = .553), or pruritus (RR (95% CI): 0.82 (0.45-1.50), P = .515). There was no significant difference between CaHA vs HA for hematomas (RR (95% CI): 0.24 (0.01-4.31), P = .332) or nodules (RR (95% CI): 0.18 (0.01-6.62), P = .353). There was no significant publication bias detected in either subgroup (Begg's test P > 0.05). CONCLUSIONS: These findings support the addition of lidocaine to NLF injection of CaHA and suggest an equivalence between CaHA and HA with respect to hematoma and nodule formation. LEVEL OF EVIDENCE 2: Risk.

Effects of substrate topography on the regulation of human fibroblasts and capsule formation via modulating macrophage polarization.

The host-material interface is critical in determining the successful integration of medical devices into human tissue. The surface topography can regulate the fibrous capsule formation around implants through macrophage polarization, but the exact mechanism remains unclear. In this study, four types of microgrooves (10 or 50 µm in groove depths and 50 or 200 µm in groove widths) were fabricated on polydimethylsiloxane (PDMS) using lithography. The microgroove surfaces were characterized using the laser scanning confocal microscopy and fourier transform infrared spectroscopy. The effect of surface topography on macrophage phenotypes and conditioned medium (CM) collected from macrophages on human foreskin fibroblast 1 (HFF-1) were investigated. The result revealed that a deeper and narrower microgroove structure means a rougher surface. Macrophages tended to adhere and aggregate on group 50-50 surface (groove depths and widths of 50 µm). THP-1 cell polarized toward both inflammatory M1 and anti-inflammatory M2 macrophages on the surface of each group. Meanwhile, CM from macrophages culture on PDMS differentially up-regulated the proliferation, migration and fibrosis of HFF-1. Among them, the group 50-50 had the strongest promoting effect. In vivo, the inflammatory response and fibrotic capsule around the implants were observed at 1 week and 4 weeks. As time passed, the inflammatory response decreased, while the capsule thickness continued to increase. The rough material surface was more inclined to develop a severe fibrotic encapsulation. In conclusion, this finding further suggested a potential immunomodulatory effect of macrophages in mediating the fibrotic response to implants and facilitated the design of biomaterial interfaces for improving tissue integration.

Co-effects of C/Ag dual ion implantation on enhancing antibacterial ability and biocompatibility of silicone rubber.

Although silicone implants are the most popular choice around the world for breast augmentation, reconstruction, and revision, due to the poor antibacterial properties and limited biocompatibility of silicone rubber (SR), one of the major complications, capsule contracture, is a lingering problem. To overcome the two main shortcomings, a dual ion implantation technique was applied to modify the surface of SR with the basic skeleton element of organic matter, carbon (C) and the broad-spectrum bactericide, silver (Ag). We present surface characterization, toxicological effects, and evaluation of the mechanical, antibacterial and biocompatible properties of C and Ag co-implanted SR (C/Ag-SRs). After ion implantation, surface roughness and tensile strength of these new materials increased. Biotoxicity was fully assessed by in vitro experiments on human fibroblasts and in vivo experiments on rats, showing that the low-Ag groups met safety standards. Both the anti-bacterial adhesion and bactericidal abilities of C/Ag-SRs were superior to those of SR, which had few antibacterial activities, especially against Staphylococcus epidermidis. With respect to biocompatibility, the adhesion of fibroblasts was promoted, while their proliferation was moderately inhibited on ion-implanted surfaces. After subcutaneous implantation in rats for 7, 30, 90 and 180 d, the capsular thickness around C/Ag-SRs was significantly lower than that around the SR. Additionally, there was no difference in the inflammatory reaction after 7 d of retention in vivo between C/Ag-SRs and SR. The results demonstrate that C/Ag-SRs are desirable shell materials for breast implants.

Mechanical and biological evaluations of beta-tricalcium phosphate/silicone rubber composite as a novel soft-tissue implant.

BACKGROUND: Although silicone rubber (SR) implants are most commonly used and effective for soft-tissue augmentation, they still have been implicated in many adverse reactions. To overcome this problem, a novel composite beta-tricalcium phosphate/silicone rubber (beta-TCP/SR) was prepared by adding beta-TCP into a SR matrix. This study was to evaluate its application potential by investigating the mechanical properties and biocompatibility of beta-TCP/SR. METHODS: Mechanical properties, including Shore A hardness and tensile strength, were evaluated with 3-mm-thick samples and a universal testing machine. Cytocompatibility tests were conducted in vitro using 0.2-mm-thick beta-TCP/SR samples by seeding fibroblasts onto different samples. Soft-tissue response to beta-TCP/SR and pull-out measurements were investigated 4 weeks and 24 weeks after implantation. RESULTS: The main mechanical properties were all significantly changed after mixing beta-TCP into the SR matrix, except for tearing strength. The cytocompatibility test showed enhanced adhesion and proliferation of fibroblasts onto beta-TCP/SR. Fibrous tissue ingrowth after resorption of beta-TCP was observed by in vivo histologic analysis. The peri-implant capsules in the beta-TCP/SR group were thinner than in the SR group 24 weeks after implantation. In a 24-week test, the maximum force required to pull out the beta-TCP/SR sheet was about six times greater than that needed for SR. CONCLUSION: Although some mechanical properties were significantly changed, the results of the cytocompatibility test and in vivo animal study still suggest that beta-TCP/SR may be more suitable as a soft-tissue implant than SR and has the potential to be used in plastic surgery.

The use of expanded polytetrafluoroethylene in depressed deformities of the face.

Expanded polytetrafluoroethylene (ePTFE) has been extensively used for facial soft tissue augmentation procedures, and is regarded as safe and reliable and suitable as a permanent implant. This implant is generally used in the lower third of the face for lips filling, nasal augmentation, nasolabial folds and chin augmentation, and rarely for congenital or acquired depressed deformities of the face. The aim of the present study was to assess the effects of ePTFE in congenital or acquired depressed deformities of the face. From September, 2008 to January, 2014, 26 patients were implanted with the material ePTFE to correct depressed deformities of the face. The average age at operation was 23.2 years, with a range of 17-45 years. The depressed deformities were lateralized. The follow-up period was 6-18 months (average 9 months). The etiologies of the depressed deformities included stable hemifacial atrophy (3 cases), craniofacial microsomia (13 cases), bony depression after trauma (8 cases), and other unclear reasons (2 cases). The operations were performed under local anesthesia. ePTFE was inserted in different tissue planes that varied among the different subanatomical areas in the face: beneath the superficial temporal fascia in the temporal area, and on the surface of the superficial musculoaponeurotic system in the zygomatic area, cheek and mandibular area. All of the patients were followed up. Most of the patients [25 of 26 patients (96.2%)] were satisfied with the results, while 1 patient (3.8%) was not satisfied for incomplete correction of the depressed deformity. In conclusion, aside from lipofilling and a free flap transfer, the results showed that ePTFE was an alternative treatment for facial depressed deformity.

Biofunctionalization of silicone rubber with microgroove-patterned surface and carbon-ion implantation to enhance biocompatibility and reduce capsule formation.

PURPOSE: Silicone rubber implants have been widely used to repair soft tissue defects and deformities. However, poor biocompatibility can elicit capsule formation, usually resulting in prosthesis contracture and displacement in long-term usage. To overcome this problem, this study investigated the properties of silicone rubber materials with or without a microgroove-patterned surface and with or without carbon (C)-ion implantation. MATERIALS AND METHODS: Atomic force microscopy, X-ray photoelectron spectroscopy, and a water contact angle test were used to characterize surface morphology and physicochemical properties. Cytocompatibility was investigated by a cell adhesion experiment, immunofluorescence staining, a Cell Counting Kit-8 assay, and scanning electron microscopy in vitro. Histocompatibility was evaluated by studying the inflammatory response and fiber capsule formation that developed after subcutaneous implantation in rats for 7 days, 15 days, and 30 days in vivo. RESULTS: Parallel microgrooves were found on the surfaces of patterned silicone rubber (P-SR) and patterned C-ion-implanted silicone rubber (PC-SR). Irregular larger peaks and deeper valleys were present on the surface of silicone rubber implanted with C ions (C-SR). The silicone rubber surfaces with microgroove patterns had stable physical and chemical properties and exhibited moderate hydrophobicity. PC-SR exhibited moderately increased dermal fibroblast cell adhesion and growth, and its surface microstructure promoted orderly cell growth. Histocompatibility experiments on animals showed that both the anti-inflammatory and antifibrosis properties of PC-SR were slightly better than those of the other materials, and there was also a lower capsular contracture rate and less collagen deposition around implants made from PC-SR. CONCLUSION: Although the surface chemical properties, dermal fibroblast cell growth, and cell adhesion were not changed by microgroove pattern modification, a more orderly cell arrangement was obtained, leading to enhanced biocompatibility and reduced capsule formation. Thus, this approach to the modification of silicone rubber, in combination with C-ion implantation, should be considered for further investigation and application.

Carbon Ion Implantation: A Good Method to Enhance the Biocompatibility of Silicone Rubber.

BACKGROUND: Silicone rubber and silicone rubber-based materials have been used as medical tissue implants in the field of plastic surgery for many years, but there are still some reports of adverse reactions to long-term implants. Earlier studies have shown that ion implantation could enhance the biocompatibility of biomaterials. However, whether ion implantation has a good effect on silicone rubber is unknown. METHODS: Three types of carbon ion silicone rubber were obtained by implanting three doses of carbon ions. Then, the antibacterial adhesion properties and the in vivo host responses were evaluated. The antibacterial adhesion properties were examined by plate colony counting, fluorescence staining, and scanning electron microscopic observation. The host responses were evaluated by surveying inflammation and fiber capsule formation that developed after subcutaneous implantation in Sprague-Dawley rats for 7, 30, 90, and 180 days. In addition, the possible mechanism by which ion implantation enhanced the biocompatibility of the biomaterial was investigated and discussed. RESULTS: Carbon ion silicone rubber exhibits less bacterial adhesion, less collagen deposition, and thinner and weaker tissue capsules. Immunohistochemical staining results for CD4, tumor necrosis factor-α, α-smooth muscle actin, and elastin showed the possible mechanism enhancing the biocompatibility of silicone rubber. These data indicate that carbon ion silicone rubber exhibits good antibacterial adhesion properties and triggers thinner and weaker tissue capsules. In addition, high surface roughness and high zeta potential may be the main factors that induce the unique biocompatibility of carbon ion silicone rubber. CONCLUSION: Ion implantation should be considered for further investigation and application, and carbon ion silicone rubber could be a better biomaterial to decrease silicone rubber-initiated complications.

Hydroxyapatite-coated sillicone rubber enhanced cell adhesion and it may be through the interaction of EF1ß and γ-actin.

Silicone rubber (SR) is a common soft tissue filler material used in plastic surgery. However, it presents a poor surface for cellular adhesion and suffers from poor biocompatibility. In contrast, hydroxyapatite (HA), a prominent component of animal bone and teeth, can promote improved cell compatibility, but HA is an unsuitable filler material because of the brittleness in mechanism. In this study, using a simple and economical method, two sizes of HA was applied to coat on SR to counteract the poor biocompatibility of SR. Surface and mechanical properties of SR and HA/SRs confirmed that coating with HA changes the surface topology and material properties. Analysis of cell proliferation and adhesion as well as measurement of the expression levels of adhesion related molecules indicated that HA-coated SR significantly increased cell compatibility. Furthermore, mass spectrometry proved that the biocompatibility improvement may be related to elongation factor 1-beta (EF1ß)/γ-actin adjusted cytoskeletal rearrangement.

Osteopontin (OPN) is an important protein to mediate improvements in the biocompatibility of C ion-implanted silicone rubber.

Medical device implants are drawing increasing amounts of interest from modern medical practitioners. However, this attention is not evenly spread across all such devices; most of these implantable devices can cause adverse reactions such as inflammation, fibrosis, thrombosis, and infection. In this work, the biocompatibility of silicone rubber (SR) was improved through carbon (C) ion implantation. Scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) results confirmed that these newly generated carbon-implanted silicone rubbers (C-SRs) had large, irregular peaks and deep valleys on their surfaces. The water contact angle of the SR surface decreased significantly after C ion implantation. C ion implantation also changed the surface charge distribution, silicone oxygen rate, and chemical-element distribution of SR to favor cell attachment. The dermal fibroblasts cultured on the surface C-SR grew faster and showed more typical fibroblastic shapes. The expression levels of major adhesion proteins, including talin-1, zyxin, and vinculin, were significantly higher in dermal fibroblasts cultured on C-SR coated plates than in dermal fibroblasts cultured on SR. Those same dermal fibroblasts on C-SRs showed more pronounced adhesion and migration abilities. Osteopontin (OPN), a critical extracellular matrix (ECM) protein, was up-regulated and secreted from dermal fibroblasts cultured on C-SR. Matrix metalloproteinase-9 (MMP-9) activity was also increased. These cells were highly mobile and were able to adhere to surfaces, but these abilities were inhibited by the monoclonal antibody against OPN, or by shRNA-mediated MMP-9 knockdown. Together, these results suggest that C ion implantation significantly improves SR biocompatibility, and that OPN is important to promote cell adhesion to the C-SR surface.

Wear of nano-TiO2/UHMWPE composites radiated by gamma ray under physiological saline water lubrication.

Nano-TiO(2)/UHMWPE composites were prepared by hot press procedure, and then radiated by gamma ray in dose of 120 kGy, 250 kGy and 500 kGy. The hardness of the composites was initially determined. Subsequently the wear against a CoCrMo alloy counterface were tested in a knee simulator under physiological saline lubrication. The morphologies of the worn surfaces were examined with optical microscope. The structure of the samples was determined by IR and XRD. The results showed that the wear rate of the composite UHMWPE decreased when filled with proper amount of nano-TiO(2) and with the radiation dose.