Oral ecological environment modifications by hard-cheese: from pH to microbiome: a prospective cohort study based on 16S rRNA metabarcoding approach.

BACKGROUND: The oral ecosystem conditions dental health, and is known to be positively modified by oral hygiene which cannot always be performed between meals, especially outside home. It is therefore important to identify the practices to be adopted to influence the oral environment in an anticariogenic direction. Milk and cheese are considered functional foods and have a role on oral health. There are several mechanisms by which cheese exerts its beneficial effects on teeth. The aim of the present study was to examine whether short term consumption of hard cheese would affect the oral pH and microbial flora of healthy adults modifying ecological oral environment. The Next Generation Sequencing (NGS) approach was applied to study the effect of Italian Grana Padano (GP), as a prototype of typical hard cheese, on the oral microbiota composition. Finally, we explored Streptococcus mutans/sanguinis ratio as a marker of protective biofilm composition. METHODS: Nine oral-healthy adults were instructed to eat 25 gr of GP cheese for 5 consecutive days. Three time points were chosen for supragingival samples collection and pH measurement. 16S rRNA-gene sequences were obtained both from oral samples and GP cheese using the MiSeq platform and analyzed against the expanded Human Oral Microbiome Database (eHOMD). ProgPerm was used to perform statistical analyses to investigate strain differential representation after cheese consumption. RESULTS: Taxonomic analyses of the oral microbiota revealed that Firmicutes was the most abundant phylum, followed by Proteobacteria and Actinobacteria. GP cheese significantly modifies oral pH, causing a shift toward basic conditions which are kept for a few hours. The Streptococcus mutans/Streptococcus sanguinis ratio lowers in the last observed timepoint. CONCLUSION: Our results reveal that a portion of GP cheese eaten after dinner provides important micronutrients (i.e. calcium, vitamins and some aminoacids such as arginine) and changes oral pH toward basic conditions, resulting in a light modification of the oral microbiome towards the reduction of the overall amount of acidophilic bacteria. Furthermore, the S. mutans/S. sanguinis ratio is reduced, contributing to obtain a more protecting environment towards caries establishment and evolution.

Bilateral Hyperplasia of the Coronoid Process in Pediatric Patients: What is the Gold Standard for Treatment?

OBJECTIVES: The aim of this systematic review of the literature is to describe treatment options for bilateral coronoid process hyperplasia in pediatric patients, to describe etiologic and diagnostic correlations with the treatment, and to evaluate long-term follow-up treatment outcomes. METHODS: A systematic revision of the literature was performed in the Medline, PubMed, Cochrane library, and Embase database up to December 5, 2017. Predetermined Medical Subject Heading keywords were used: "bilateral" or "monolateral" and "coronoid" or "coronoid process" and "hyperplasia" and "temporomandibular joint" or "tmj" and "ankylosis" or "trismus" and "treatment." Results were recorded following PRISMA guidelines. RESULTS: The systematic research produced 1459 results excluding duplicates. Two additional studies from "Grey literature" were also considered. After application of inclusion and exclusion criteria, 38 articles were selected for a qualitative synthesis. Data regarding sex and age of presentation were collected and summarized in a study flow diagram. CONCLUSION: It is possible to conclude that early diagnosis is fundamental to restore stomatognathic multifunction. There is lack of longitudinal studies presenting long-term follow-up to determine treatment stability. Coronoidectomy might be considered gold standard treatment for this pathologic condition.

Three-Dimensional Virtual Treatment Planning: Presurgical Evaluation.

OBJECTIVE: This article describes a virtual protocol designed to optimize surgical orthodontic diagnosis and treatment plan. METHODS: A total of 15 patients undergoing orthodontic-surgical treatment have been analyzed with a presurgical virtual three-dimensional (3D) treatment planning, which involves 9 steps. All the patients have been treated with the use of occlusal splint guides projected on the basis of the surgical and orthodontic visualized treatment objective . RESULTS: In all the analyzed patients, a precise and optimal orthodontic presurgical preparation has been obtained. CONCLUSIONS: The 3D analysis seems more precise to interpret than two-dimensional; it provides information and images of craniofacial structures free from perspective distortion and it reduces the steps of the presurgical diagnosis. The simplicity of the protocol described in this paper makes possible to apply it in everyday practice.The study described here allows high-precision planning of orthodontic-surgical therapy and optimization of each treatment phase, with consequent advantages in clinical practice: a more accurate orthognathic surgery with predictable results.

Presurgical virtual three-dimensional treatment planning.

AIM: This article describes an experimental protocol designed to optimize surgical orthodontic diagnosis and treatment plan. MATERIALS AND METHODS: In this study, 15 patients undergoing orthodontic-surgical treatment have been analyzed.The superimposition between models and respective presurgical setup for each group was performed. A best-fit algorithm was used to find the position of the arches in space for which the sum of the discrepancies was the shortest.A punctual variation colorimetric map indicating percentages of areas subjected to different discrepancies was used to evaluate the degree of congruence between the 2 models.Furthermore, for each arch the software provided metric values of maximum positive deviation, maximum negative deviation, mean deviation, and standard deviation that characterize the points compared in the superimposition. RESULTS: For all the considered patients, the orthodontic preparation for surgery was obtained according to the splint guides and the orthodontic planning. CONCLUSION: The protocol described here allows high-precision planning of orthodontic-surgical therapy optimization of each treatment phase, with consequent advantages in clinical practice.

Three-dimensional evaluation of upper airway in patients with obstructive sleep apnea syndrome during oral appliance therapy.

Obstructive sleep apnea syndrome (OSAS) represents a frequent and common respiratory disease characterized by repeated episodes of complete and/or partial obstruction of upper airways during sleep, normally associated with reduction of oxygen saturation in blood. The oral appliances (OAs) are considered to be an effective treatment modality thanks to the upper airway enlargement. Lateral cephalometry has been used for the 2-dimensional evaluation of upper airway form with several limits. We obtained an accurate 3-dimensional (3D) volume analyses with cone beam computed tomography (CBCT) scans to confirm the effects of OA on the upper airway in patients with OSAS. Ten Italian patients with moderate or severe OSA (3 males and 7 females, 53.4 ± 11.3 years of age, and BMI 24.5 ± 2.7), who cannot tolerate continuous positive air pressure therapy and rejected a surgical approach, were treated with non-adjustable customized OAs and evaluated with CBCT and polysomnography. Upper airway form was examined in the presence and absence of OA and the volume was measured and compared in 2 different areas. Specific planes have been considered to match the data and calculate the benefit obtained with therapy. Nine out of ten patients showed an improvement of total upper airway volume and an improvement in apnea-hypopnea index. Volume increased both in the posterior soft palate region and in the posterior tongue region. In the inferior area, we observed greater differences. 3D image reconstruction accurately confirmed morphological changes in the upper airway during OA therapy. The use of this 3D evaluation is expected to improve the results of OA therapy in the future.

Orthodontic Treatment of Binder Syndrome: A Case Report With 5 Years of Follow-up.

We report here the case of orthodontic nonsurgical treatment in a patient with Binder syndrome. This rare syndrome (<1/10,000) is a deforming alteration of the middle third of the face, also known as maxillonasal dysplasia/dysostosis. The therapeutic approach often undertaken is an orthodontic-surgical protocol, which includes several invasive interventions such as LeFort I or II. In this patient and early diagnosis made it possible to intervene on an orthodontic level only, thus avoiding highly invasive surgical procedures (as of a 5-year follow-up).

Accidental aspiration of foreign bodies in dental practice: clinical management and prevention.

OBJECTIVE: Foreign body aspiration is a possible complication of dental treatment that may result in a life-threatening situation. The foreign body is often spontaneously ejected from the airway, but in other cases, surgical intervention is needed. Prevention, diagnostic procedures, treatment and complications are discussed. MATERIALS AND METHODS: Three cases of aspiration of dental instruments are described: the piece was localised in the right main bronchus in two cases and in the left main bronchus in one case. RESULTS: All three cases underwent surgery (resection and bronchoscopy); in one case, the surgical attempt failed, and the foreign body was not located by radiography; it was assumed to have been expelled spontaneously. CONCLUSION: The management of dental materials and instruments requires particular care, especially if the patient is supine or semi-recumbent. The dentist must be able to manage emergency situations in which patients accidentally inspire or swallow dental instruments or materials during treatment. Preventive techniques must be put in place because these incidents are preventable if the correct precautions are taken.

Verification of the reliability of the three-dimensional virtual presurgical orthodontic diagnostic protocol.

The precision of presurgical orthodontic diagnostic protocol plays a key role for the success of orthognathic surgery.Recently, the introduction of cone beam computed tomography and the development of digital technologies led to the possibility to create new virtual protocols of diagnostic protocol.The purposes of this study were to describe the virtual presurgical orthodontic diagnostic protocol experimented by the Orthodontics Department of the University of Milan and to assess its reliability by comparing it with the nonvirtual protocol.The study sample was a group of 18 adult patients who required surgical correction of skeletal asymmetric class II or III malocclusion: 9 of them were subjected to the virtual diagnostic protocol, whereas the other 9 were subjected to the traditional one. A comparison between the 2 methods was carried out by evaluating the degree of the discrepancy between setup and presurgical models in both groups. The values of maximum positive deviation, maximum negative deviation, mean deviation, and standard deviation that characterize the points of the superimpositions were considered.An optimal superimposition (>75%) between the scanning of the setup and presurgical models was obtained for all subjects except for 2 patients with asymmetry. The analysis of the punctual deviation variables did not show statistically significant differences between the techniques.The study suggested a high precision for both diagnostic protocols, and the reliability of the 2 methods is comparable. However, the virtual protocol has several advantages such as quantity of information obtainable, repeatability, and speed of execution.

Obstructive sleep apnea syndrome (OSAS) in children with Class III malocclusion: involvement of the PHOX2B gene.

PURPOSE: The aim of this study is to provide new molecular approaches to the children with obstructive sleep apnea syndrome by evaluating the possible involvement of the PHOX2B gene, notoriously associated to congenital central hypoventilation syndrome (CCHS), in Class III malocclusion. METHODS: Fifty subjects with Class III malocclusion, aged from 8 to 14 years, and with history of sleep apneic episodes, and 20 age-matched controls were submitted to genomic DNA examination from oral cells to specifically analyze the PHOX2B genotype. RESULTS: Point "silent" mutations affecting different nucleotides of the PHOX2B gene were observed in 32 % of patients with Class III malocclusion and never in controls (0 %). CONCLUSION: The genetic data obtained in this study in children with Class III malocclusion and sleep-related breathing disorders provide new information useful to the genetic characterization of this pathology. The PHOX2B gene silent mutations can lead to structural and functional modification of their product providing to a group of children with Class III malocclusion similar features to those of CCHS (sleep apnea episodes and craniofacial malformations).

Presurgical orthodontic planning: predictability.

The success of orthognathic surgery depends upon the anatomical details of the patient, the direction and extent of the necessary displacement, the experience of the surgical and orthodontic team, and the precision of presurgical orthodontic planning. The authors describe an experimental protocol to optimize presurgical orthodontic planning by the study of linear and rotational discrepancies of skeletal structures. Rotational changes of the skeletal structures can result in an overestimation or underestimation of linear discrepancies. Moreover, teeth can interfere with rotational movements, complicating presurgical planning.The study sample was a group of 20 adult patients, 7 males and 13 females. The inclusion criterion was adult patients who required correction of skeletal asymmetric class II or III malocclusion by osteotomy. Movements in the horizontal, frontal, and midsagittal planes can be simulated and measured through model surgery after diagnostic wax-up of the orthodontic treatment objective. Orthodontic presurgical preparation can be verified through the use of an occlusal splint, which represents a reliable guide during orthodontic preparation. The presurgical orthodontic phase can be obtained in less time and with more accuracy using this treatment planning method and indirect bonding of the orthodontic appliances.

[Change in condylar and mandibular morphology in juvenile idiopathic arthritis: cone beam volumetric imaging]. / A fejecs és a mandibula morfológiájának változása juvenilis idiopátiás arthritisben: vizsgálatok cone beam CT-vel.

The aim of this study is to show the importance of Cone Beam Computerized Tomography to volumetrically quantify TMJ damage in patients with JIA, measuring condylar and mandibular real volumes. 34 children with temporomandibular involvement by Juvenile Idiopathic Arthritis were observed by Cone Beam Computerized Tomography. 4 were excluded because of several imaging noises. The mandible was isolated from others craniofacial structures; the whole mandibular volume and its components' volumes (condyle, ramus, hemibody, hemisymphysis on right side and on left side) has been calculated by a 3D volume rendering technique. The results show a highly significant statistical difference between affected side volumetric values versus normal side volumetric values above all on condyle region (P < 0.01), while they don't show any statistical differences between right side versus left side. The Cone Beam Computerized Tomography represents a huge improvement in understanding of the condyle and mandibular morphological changes, even in the early stages of the Juvenile Idiopathic Arthritis. The JIA can lead in children to temporomandibular joint damage with facial development and growth alterations.

The effect of Teflon coating on the resistance to sliding of orthodontic archwires.

Teflon is an anti-adherent and aesthetic material. The aim of this study was to evaluate, in vitro, the influence of Teflon coating on the resistance to sliding (RS) of orthodontic archwires. For this purpose, Teflon-coated archwires were examined using frictional resistance tests by means of a universal testing machine and compared with conventional uncoated wires. Twelve types of archwires with round and rectangular sections (0.014, 0.018, and 0.018 × 0.025 inches) and of different materials (stainless steel and nickel-titanium) were tested with two passive self-ligating brackets (SmartClip™ and Opal(®)) and one active self-ligating bracket (Quick(®)). Each archwire-bracket combination was tested 10 times under 8 simulated clinical scenarios. Statistical comparisons were conducted between the uncoated and Teflon-coated archwires using Wilcoxon and Mann-Whitney tests, and linear regression analysis. For all bracket-archwire combinations, Teflon-coated archwires resulted lower friction than the corresponding uncoated archwires (P < 0.01). The results showed that Teflon coating has the potential to reduce RS of orthodontic archwires.

Rapid maxillary expansion in growing patients. Hyrax versus transverse sagittal maxillary expander: a cephalometric investigation.

The aim of this retrospective study was to cephalometrically evaluate and compare the skeletal and dental effects of a transverse sagittal maxillary expander (TSME) and a Hyrax-type expander (RME) in children with maxillary hypoplasia. Fifty subjects (26 males and 24 females), aged from 6 to 15 years, with a maxillary crossbite caused by basal apical narrowness, were divided into two equal groups. Twenty-five were treated with a TSME and the other 25 with a RME. For each patient, a lateral cephalogram was obtained before treatment (T0) and at the end of the retention period (T1). Changes in the two groups during the observation period were calculated, compared, and statistically analysed with a paired samples t -test. In the TSME group, SNP-A, I SN, and I FH and in the RME group SN-SNP.SNA, N-Me, and U6.PP displayed a statistically significant increase (P < 0.05). The increase in SNP-A, I SN, and I FH in the TSME group was significantly greater following treatment than in the RME group. The results support the use of the TSME to produce skeletal changes and dentoalveolar modification and to correct maxillary hypoplasia. It was also demonstrated that in patients with an anterior open bite, the use of the TSME is not contraindicated as the anterior vertical dimension did not increase significantly.

Relationship between Breastfeeding and Malocclusion: A Systematic Review of the Literature.

BACKGROUND: The purpose of this systematic review was to analyze the available literature about the influence of breastfeeding in primary and mixed dentition on different types of malocclusions. METHODS: Preferred Reporting Items for Systematic Reviews and Meta-Analyses Protocols (PRISMA-P) guidelines were used to perform the present review. The following electronic databases were searched: Pubmed, Evidence-Based Medicine Reviews (EBMR), Embase, Cochrane Library, Medline, Web of Science and Ovid. RESULTS: A primary research found a total of 279 articles. Two more papers were also considered from the gray literature. Two hundred sixty-three articles were excluded as they were deemed irrelevant on the basis of: duplicates, title, abstract, methods and/or irrelevant contents. Eighteen papers were selected and included in the qualitative analysis. CONCLUSIONS: breastfeeding is a positive factor that seems to reduce the incidence of posterior crossbite, skeletal class II and distoclusion in primary and mixed dentition. A sort of positive relationship between months of breastfeeding and risk reduction seems to exist. More longitudinal research is needed to avoid bias in the results, with data collected prospectively on the months of exclusive breastfeeding, by means of specific questionnaires and successive clinical evaluation of the occlusal condition at the primary dentition, mixed dentition and permanent dentition stages.

Drilling Capability of Orthodontic Miniscrews: In Vitro Study.

The aims of this study were to assess the values and mechanical properties of insertion torque (IT) of steel miniscrews inserted in artificial bone blocks (Sawbones, Pacific Research Laboratories, Vashon, WA, USA) with different bone densities and to detect any scratches on the surface of the miniscrews after insertion. Forty self-drilling miniscrews (Leone S.p.A. ø 1.75 mm, L 8 mm) have been inserted into bone blocks that mimic different stability conditions (density: 20 PCF-pounds per cubic foot, 40 PCF, and 30 + 50 PCF with 2 mm and 4 mm of cortical bone). Before insertion and after removal, all miniscrews were inspected with a stereomicroscope 5x and a SEM to detect potential microscopic cracks. Using an electronic surgical motor (W&H Dentalwerk Bürmoos GmbH, Werner Bader Str. 1, 5111 Bürmoos, Austria), the maximum insertion torque value was registered. Stereomicroscope and SEM examination did not indicate any morphological and surface structural changes to the miniscrews, irrespective of the bone density they were inserted into. The findings showed that IT increased significantly with increasing bone density. In each artificial bone block, morphostructural analysis demonstrated the adequate mechanical properties of the self-drilling miniscrews. IT measurements indicated torque values between 6 and 10 Ncm for blocks with a density of 30 + 50 PCF, whereas the suggested values are between 5 and 10 Ncm.

Oculofacial alterations in NBAS-SOPH like mutations: Case report.

PURPOSE: To describe the clinical features of a rare case of NBAS-SOPH-like mutations; to emphasize special aspects of the ocular and oro-facial regions. METHODS: Case report. CASE DESCRIPTION: We present a 5-year-old girl initially examined for her dysmorphic features, mental delay, strabismus, and high myopia. During the funduscopic examination, we observed optic atrophy with narrow thinned arterioles with the light brown reflex of the central retina. A genetic assessment revealed NBAS-SOPH like mutation. An assessment by a team of orthodontists defined typical characteristics. CONCLUSIONS: NBAS mutations can also cause complex disease with a broad clinical spectrum ranging from isolated recurrent acute liver failure (RALF) to a multisystemic phenotype. Due to the heterogeneity of the expressions, a multispeciality approach to this situation is recommended.

Orthodontic movement of a dilacerated maxillary incisor in mixed dentition treatment.

Dilaceration is a dental deformity characterized by an angulation between crown and root causing non-eruption of the tooth. It generally occurs following trauma to the deciduous dentition the apices of which lie close to the permanent tooth buds. Surgical extraction used to be the first choice in treating the severely dilacerated teeth. In this case report, it is described how a dilacerated central incisor was successfully moved into alignment in a young patient with proper surgical and orthodontic management avoiding use of prosthetic/implant devices. The panoramic radiograph after the traumatic injury is compared with the one at the end of treatment. The results were sustainable over long-term in both periodontal and aesthetic terms.

Long-term results of early condylar fracture correction: case report.

Condylar fractures in childhood occur frequently, often with minimal pain and discomfort and therefore the diagnosis is not made at the time of injury. Management may be surgical or non-surgical. Non-surgical therapy in children is the method of choice if the condyle can translate normally. In fact, there is an excellent chance of regeneration and continued normal development after fracture in growing patients. The purpose of this article is to describe the long-term clinical and radiological evaluation of a conservatively treated unilateral condylar fracture, a result of trauma, in a 6-year-old patient. In addition, she presented a congenitally missing lower incisor ipsilateral to the fracture and a class II malocclusion. She was treated with functional jaw orthopedics using a splint and an activator and subsequent orthodontic treatment with fixed appliances [J Orofac Orthop5 (2002) 429]. The remodeling process of the condylar head and neck is clearly observed in the panoramic radiographs of the 12-year follow-up records presented.

Orthodontic treatment in a patient with cleidocranial dysostosis.

Cleidocranial dysostosis is a rare congenital skeletal disorder, associated with clavicular hypoplasia or aplasia, delayed closure of cranial fontanels, brachycephalic skull, delayed exfoliation of primary dentition, eruption of permanent teeth, and multiple supernumerary and morphologic abnormalities of the maxilla and mandible. The disorder is caused by mutation in the CBFA1 gene, on the short arm of chromosome 6p21. The prevalence of cleidocranial dysostosis is estimated one per million, without sex or ethnic group predilection. The purpose of this paper is to describe the orthodontic treatment in a patient with cleidocranial dysostosis. Therapy may include removal of supernumerary teeth, surgical exposure of impacted teeth, and orthodontic treatment.

In vitro evaluation of the frictional forces between brackets and archwire with three passive self-ligating brackets.

The aim of this in vitro study was to evaluate the frictional forces between bracket and archwire that included three passive self-ligating brackets (Damon SL2 SDS). The brackets were individually bonded to a brass mount using a preformed 0.021 x 0.025 inch stainless steel wire jig in order to exclude adverse tipping or torsion. The central bracket was positioned 1 mm higher than the others, in order that the three brackets were vertically unaligned. Thirty-six similar set-ups including in total 108 brackets were investigated using the same wire: copper (nickel-titanium) 0.014 inches. A testing machine was designed and constructed to measure the frictional forces between the wire and the three-bracket set-up. Twelve set-ups were tested to measure kinetic frictional forces between the wire and unaligned passive self-ligating brackets used in the closed position. The frictional properties of two sets of 12 three-bracket set-ups (control) were tested and measured with an open slide and conventional ligation. A stainless steel ligature wire was used in the former, while elastomeric modules were employed in the latter. One-way analysis of variance showed a significant effect of ligation mode on the frictional properties of the three-bracket set-ups (P < 0.001). Post hoc pairwise comparison showed that the frictional forces arising from passive self-ligation were significantly lower (P < 0.01) than those resulting from elastic ligation. The same result was achieved when comparing self-ligation and metallic ligation (P < 0.01). No significant difference was found when comparing elastic and metallic ligation.