RESUMEN
OBJECTIVE: This study evaluated the dimensional and positional osseous temporomandibular joint features in normodivergent facial patterns with and without temporomandibular disorders. METHODS: A total of 165 adult patients were divided into two groups: group 1 (n = 79 patients; 158 joints): temporomandibular disorders patients and group 2 (n = 86 patients; 172 joints): non-temporomandibular disorders patients. Three-dimensional positional and dimensional temporomandibular joint characteristics, including glenoid fossa, mandibular condyles, and joint spaces, were assessed by cone beam computed tomography. RESULTS: The glenoid fossa positions in the three orthogonal planes and height showed statistical significance between the two studied groups. The temporomandibular disorders patients showed higher horizontal and vertical condyle inclinations while anteroposterior inclination was less, and the condyle was positioned more superior, anterior, and lateral in the glenoid fossa. The condyle width and length showed no significance between the two groups, while condyle height was smaller in temporomandibular disorders patients. Anterior and medial joint spaces increased while the superior and posterior joint spaces reduced in temporomandibular disorders patients. CONCLUSION: There were significant differences between the patients with and without temporomandibular joint disorders in terms of mandibular fossa positions and height as well as condylar positions and inclinations in horizontal and vertical planes together with reduced condylar height and reduced posterior and superior joint spaces in the temporomandibular disorders patients. CLINICAL RELEVANCE: The temporomandibular disorder is a multifactorial disorder in which one of these factors is the dimensional and positional characteristics of the temporomandibular joints; including or excluding this factor requires a comprehensive three-dimensional investigation of patients with TMD compared to the normal group under the condition that the facial pattern is average as a confounding factor.
Asunto(s)
Trastornos de la Articulación Temporomandibular , Articulación Temporomandibular , Adulto , Humanos , Articulación Temporomandibular/diagnóstico por imagen , Trastornos de la Articulación Temporomandibular/diagnóstico por imagen , Cóndilo Mandibular/diagnóstico por imagen , Cara , Tomografía Computarizada de Haz CónicoRESUMEN
OBJECTIVE: The aim is to compare the facial esthetics following nasoalveolar molding (NAM) versus computer-aided design NAM (CAD/NAM) in patients with bilateral cleft lip/palate (CLP). DESIGN: The trial is a randomized comparative trial with a 1:1 allocation ratio. PARTICIPANTS: Thirty infants with bilateral complete cleft lip and palate were recruited. INTERVENTIONS: Patients were randomized between NAM and CAD/NAM groups. The treatment steps described by Grayson were followed for the NAM group. In the CAD/NAM group, digitized maxillary models were made to create a series of modified virtual models, which were used to fabricate the molding plates using 3-dimensional printing technology. The nasal stents were then added to the intraoral plates following the Grayson method. The study lasted for 4 months. MAIN OUTCOMES: The assessment of the changes observed in the interlabial gap and nasolabial esthetics was done using standardized 2-dimensional photographs. The correlation between dental arch changes and extraoral facial esthetics was studied. RESULTS: Both modalities showed improvement in nasolabial esthetics before the lip surgery. No statistically significant difference was found between NAM and CAD/NAM groups in any of the assessed variables. CONCLUSIONS: Both interventions were effective in the management of infants with bilateral CLP.
Asunto(s)
Labio Leporino , Fisura del Paladar , Lactante , Humanos , Labio Leporino/cirugía , Fisura del Paladar/cirugía , Nariz/cirugía , Modelado Nasoalveolar , Estética DentalRESUMEN
OBJECTIVE: The aim is to compare between the clinical effectiveness of nasoalveolar molding (NAM) versus the computer-aided design NAM (CAD/NAM) in patients with bilateral clefts. DESIGN: The trial is a randomized comparative trial with 1:1 allocation ratio. PARTICIPANTS: Thirty infants with bilateral complete cleft lip and palate were recruited. INTERVENTIONS: Patients were randomized between NAM and CAD/NAM groups. The treatment steps described by Grayson were followed for the NAM group. In the CAD/NAM group, digitized maxillary models were made to create series of modified virtual models which were used to fabricate the molding plates using 3-dimensional printing technology. The nasal stents were then added to the plates following Grayson method. The study lasted for 4 months. MAIN OUTCOMES: The primary outcome was to evaluate the changes in the intersegment cleft gap. Secondary outcomes included the analysis of the maxillary arch in transverse, anteroposterior, and vertical dimensions as well as the premaxillary deviation and rotation. Chair side time was assessed for both methods. RESULTS: Both modalities decreased the intersegment cleft gap. The CAD/NAM plates caused more reduction in the total arch length by 1.99 mm (-3.79 to 0.19, P = .03) as compared to the NAM treatment. No differences were found between groups in the transverse and vertical maxillary arch changes. CONCLUSIONS: Both interventions were effective in narrowing the cleft gap. Similar maxillary changes were found in both groups. The CAD/NAM modality required less chair side time compared to the NAM treatment.
Asunto(s)
Labio Leporino , Fisura del Paladar , Proceso Alveolar , Labio Leporino/cirugía , Fisura del Paladar/cirugía , Diseño Asistido por Computadora , Humanos , Lactante , Modelado Nasoalveolar , Nariz , Resultado del TratamientoRESUMEN
OBJECTIVE: The aim of the current study was to introduce and measure the effectiveness of a new 3D-printed nasoalveolar molding (D-NAM) appliance on improving the maxillary arch dimensions (MADs) in infants with unilateral complete cleft lip and palate (UCLP) before surgical lip repair. DESIGN: A prospective, balanced, randomized, parallel groups, single-blinded, controlled trial. SETTING: All the steps of the current study were carried in the Department of Orthodontics, Cairo University in Egypt. PARTICIPANTS: Thirty-four, nonsyndromic infants with UCLP. INTERVENTIONS: The eligible infants were randomly assigned into either no-treatment (control) or to the new D-NAM groups. In D-NAM group, the maxillary models were 3D scanned into virtual models onto which segmentation and alveolar segments approximation were performed. Approximation movements were divided into 3 models representing 3 activation steps. On each of these models, virtual appliance construction was performed followed by 3D printing of the appliance. Nasal stent was added manually to the appliances of the second and third steps. Horizontal tapes were applied to infants in the D-NAM group only. MAIN OUTCOMES MEASURES: A Blinded assessors carried all the MADs measurements virtually on digital models collected at the beginning (T1) and after (T2) treatment. RESULTS: Clinically and/or statistically significant improvements in all the measured MADs were recorded in D-NAM group at T2 before surgical lip repair in comparison to control group. CONCLUSIONS: The introduced D-NAM/3D-printed appliance is a simple and efficient technique to improve the MADs in infants with UCLP before surgical lip repair.
Asunto(s)
Labio Leporino , Fisura del Paladar , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/cirugía , Labio Leporino/diagnóstico por imagen , Labio Leporino/cirugía , Fisura del Paladar/diagnóstico por imagen , Fisura del Paladar/cirugía , Egipto , Humanos , Lactante , Modelado Nasoalveolar , Nariz , Hueso Paladar , Impresión Tridimensional , Estudios ProspectivosRESUMEN
OBJECTIVE: The aim of the current randomized controlled trial (RCT) was to assess the effectiveness of taping alone in changing the maxillary arch dimensions (MADs) in infants with unilateral complete cleft lip and palate (UCLP) before surgical lip repair. DESIGN: A prospective, balanced, randomized, parallel-group, single-blinded, controlled trial. SETTING: All the steps of the current study were carried in the Department of Orthodontics, Cairo University in Egypt. PARTICIPANTS: Thirty-one, nonsyndromic infants with UCLP. INTERVENTIONS: The eligible infants were randomly assigned to either no-treatment (control) or taping groups. In the taping group, all the infants received horizontal tape between the 2 labial segments aiming to decrease the cleft gap. No other interventions were performed to infants included in this group. Rubber base impressions were made to all the included infants in both groups at the beginning of the treatment (T1) and directly before surgical lip repair (T2). All the produced models were scanned using a desktop scanner producing digital models for outcome assessment. MAIN OUTCOMES MEASURES: A blinded assessor carried out all the MAD measurements virtually on the produced digital models at the beginning (T1) and after (T2) treatment. RESULTS: Clinically and/or statistically significant changes in all the measured MADs were recorded in the taping group at T2 before surgical lip repair in comparison to the control group. CONCLUSIONS: It seems that taping alone is an efficient tool in changing the MADs before surgical lip repair in infants with UCLP.
Asunto(s)
Labio Leporino , Fisura del Paladar , Labio Leporino/cirugía , Fisura del Paladar/cirugía , Egipto , Humanos , LactanteRESUMEN
INTRODUCTION: Minimally invasive micro-osteoperforations (MOPs) look promising for a routine acceleration of orthodontic tooth movement (OTM). The objective of this research was to systematically evaluate evidence regarding the effects of MOPs on the OTM rate, treatment duration, and associated complications. METHODS: Electronic database and hand search of English literature in PubMed, Cochrane Central Register of Controlled Trials, Embase, Web of Science, and clinical trial.gov, with author clarification were performed. The selection criteria were randomized controlled trial (RCT) comparing MOPs with conventional treatment involving both extraction and nonextraction. Cochrane's risk of bias tool and Grading of Recommendations Assessment, Development and Evaluation approach were used for quality assessment. Studies were analyzed with chi-square-based Q statistic methods, I2 index, fixed-effects, and random-effects model. Quantitative analysis was done on homogenous studies using Review Manager. RESULTS: Eight RCTs were included for the qualitative analysis. Meta-analysis of 2 homogenous studies indicated insignificant effect with MOPs (0.01 mm less OTM; 95% CI, 0.13-0.11; P = 0.83). No difference (P >0.05) was found in anchorage loss, root resorption, gingival recession, and pain. CONCLUSIONS: Meta-analysis of 2 low-risk of bias studies showed no effect with single application MOPs over a short observation period; however, the overall evidence was low. The quality of evidence for MOP side effects ranged from high to low. Future studies are suggested to investigate repeated MOPs effect over the entire treatment duration for different models of OTM and its related biological changes. TRIAL REGISTRATION NUMBER: PROSPERO CDR42019118642.
Asunto(s)
Recesión Gingival , Resorción Radicular , Técnicas de Movimiento Dental , Manejo de Datos , Humanos , DolorRESUMEN
BACKGROUND: Recently, the use of skeletal anchors in conjunction with fixed functional appliances (FFAs) has been advocated to enhance skeletal changes and reduce proclination of the lower incisors. OBJECTIVE: To compare the skeletal and dento-alveolar effects of the use of FFAs with and without skeletal anchorage (miniscrews or miniplates). SEARCH METHODS: Unrestricted electronic search of six databases and additional manual searches were performed up to July 2015. ELIGIBILITY CRITERIA: Randomized and prospective non-randomized controlled trials directly comparing the use of FFA with and without skeletal anchorage, and involving growing patients with Class II malocclusion. DATA COLLECTION AND ANALYSIS: Skeletal and dento-alveolar outcomes data were extracted in pre-defined sheets to collect study characteristics by two authors independently. After evaluating risk of bias, the standardized mean differences (SMDs) and 95% confidence intervals (CIs) were calculated with random-effects models. Subgrouping was pre-planned on the basis of the skeletal anchorage type used. Additional subgroup analysis was performed on the basis of the type of FFA used and the study design. RESULTS: Seven studies were evaluated, and only five of which were included in the meta-analysis. The analysis included data from 157 Class II subjects (77 treated with FFA and skeletal anchorage, and 80 with FFA alone). Random-effects meta-analysis demonstrated no significant differences in the mandibular length and SNB angle changes [SMD = 1.98 (95% CI -0.11 to 4.07) and 1.20 (95% CI -0.37 to 2.77) respectively]. Significant differences were found between the inclination changes of lower and upper incisors [SMD = -1.43 (95% CI -2.59 to -0.27) and SMD = -1.04 (95% CI -1.57 to -0.51) respectively]. Subgroup differences were highly significant in most of the outcomes. CONCLUSIONS: The studies reviewed provide insufficient evidence to form a conclusion regarding the effects of the use of skeletal anchorage with FFA. The available weak evidence suggests that the use of skeletal anchorage with FFA has no superior skeletal effects but is able to reduce proclination of the lower incisors.
Asunto(s)
Maloclusión Clase II de Angle/terapia , Aparatos Ortodóncicos Funcionales , Proceso Alveolar/patología , Placas Óseas , Tornillos Óseos , Humanos , Incisivo/patología , Mandíbula/patología , Ortodoncia Correctiva/instrumentación , Ortodoncia Correctiva/métodos , Estudios ProspectivosRESUMEN
INTRODUCTION: The objective of this 2-arm parallel randomized controlled trial was to evaluate patient acceptance of the mini-implant anchored Forsus Fatigue Resistant Device (FFRD) (3M Unitek, Monrovia, Calif). METHODS: The study included 32 skeletal Class II girls. The eligibility criteria included a deficient mandible, a horizontal or neutral growth pattern, an increased overjet, and a full set of erupted permanent teeth. After the leveling and alignment stage, FFRDs and mini-implants were inserted; they were removed after the teeth reached an edge-to-edge incisor relationship. The patients were afterward asked to fill out assessment questionnaires regarding their experience with the FFRD. OUTCOMES: The primary outcome of this study was to assess patient acceptance of the appliance and satisfaction with the results. The secondary outcomes were interference with functional activities, noticeability by others, pain, swelling, gum problems caused by the appliance, and appliance breakage. RANDOMIZATION: Computer random sequence generation was done using block sizes of 6 and 4. Allocation concealment was achieved with sequentially numbered opaque sealed envelopes. BLINDING: Blinding of the clinicians and the patients to the intervention was impossible, but it was done for the outcome assessment and the statistician. RESULTS: The 32 patients were randomly allocated in a 1:1 ratio into 2 groups: 16 patients (mean age, 13.25 ± 1.12 years) received the FFRD alone (FFRD group), and 16 patients (mean age, 13.07 ± 1.41 years) had mini-implants in conjunction with FFRDs (FMI group). No statistically significant differences were reported between the 2 groups regarding ease of appliance insertion, noticeability by others, pain, swelling, effects on eating and speech, and gum bleeding; 100% and 87.5% were satisfied with the results in the FFRD and FMI groups, respectively, with a ridit value of 0.57 (95% confidence interval, 0.43-0.71; P = 0.36). No serious harm was observed other than swelling of the cheeks, which occurred in 4 patients. CONCLUSIONS: There were no significant differences between the patients' acceptance of the FFRD and the mini-implant anchored FFRD. They were highly satisfied with the results. Neither group reported significant functional limitations. REGISTRATION: This trial was not registered. PROTOCOL: The protocol was not published before trial commencement. FUNDING: The study was self-funded by the authors.
Asunto(s)
Métodos de Anclaje en Ortodoncia/instrumentación , Diseño de Aparato Ortodóncico , Aparatos Ortodóncicos Funcionales , Aceptación de la Atención de Salud , Adolescente , Actitud Frente a la Salud , Cefalometría/métodos , Niño , Implantes Dentales , Ingestión de Alimentos/fisiología , Edema/etiología , Falla de Equipo , Femenino , Estudios de Seguimiento , Hemorragia Gingival/etiología , Humanos , Relaciones Interpersonales , Maloclusión Clase II de Angle/terapia , Miniaturización , Dolor/etiología , Satisfacción del Paciente , Retrognatismo/terapia , Habla/fisiología , Resultado del TratamientoRESUMEN
INTRODUCTION: A deepbite malocclusion should not be approached as a disease entity; instead, it should be viewed as a clinical manifestation of underlying discrepancies. The aim of this study was to investigate the various skeletal and dental components of deep bite malocclusion, the significance of the contribution of each, and whether there are certain correlations between them. METHODS: Dental and skeletal measurements were made on lateral cephalometric radiographs and study models of 124 patients with deepbite. These measurements were statistically analyzed. RESULTS: An exaggerated curve of Spee was the greatest shared dental component (78%), significantly higher than any other component (P = 0.0335). A decreased gonial angle was the greatest shared skeletal component (37.1%), highly significant compared with the other components (P = 0.0019). A strong positive correlation was found between the ramus/Frankfort horizontal angle and the gonial angle; weaker correlations were found between various components. CONCLUSIONS: An exaggerated curve of Spee and a decreased gonial angle were the greatest contributing components. This analysis of deepbite components could help clinicians design individualized mechanotherapies based on the underlying cause, rather than being biased toward predetermined mechanics when treating patients with a deepbite malocclusion.
Asunto(s)
Sobremordida/clasificación , Adolescente , Proceso Alveolar/patología , Cefalometría/métodos , Arco Dental/patología , Conducto Auditivo Externo/patología , Humanos , Incisivo/patología , Mandíbula/patología , Maxilar/patología , Modelos Dentales , Órbita/patología , Sobremordida/patología , Rotación , Corona del Diente/patología , Erupción Dental , Adulto JovenRESUMEN
OBJECTIVE: To investigate the morphological and positional temporomandibular joint (TMJ) characteristics of different temporomandibular disorders (TMDs). METHODS: One hundred forty-three TMD patients were divided into three groups: Group 1: Myalgia (M), Group 2: Disc displacement with reduction (DDWR), and Group 3: Disc displacement without reduction (DDWOR). Three-dimensional positional and dimensional parameters of the TMJ, including mandibular fossa, condyle, and TMJ spaces were evaluated using cone beam computed tomography (CBCT). The significance level was p < 0.05. RESULTS: Mandibular condyles were significantly positioned in more vertical, posterior, and medial directions, with the reduced condylar width in the DD groups (p < 0.001). Anterior joint space was significantly higher in the DDWR group than the myalgia group; the superior joint spaces were more reduced in DD groups than the myalgia group. CONCLUSION: Patients diagnosed with disc displacement showed significantly different condylar positions and joint spaces compared to the myalgia group in a skeletally comparable sample.
RESUMEN
BACKGROUND: The aim of this randomized controlled trial was to assess the effectiveness of taping alone in changing nose and lip aesthetics in infants with unilateral complete cleft lip and palate before and after surgical lip repair. METHODS: The study design was a prospective, balanced, randomized, parallel-group, single-blinded, controlled trial. All the steps were carried out in the Department of Orthodontics of Cairo University in Egypt. Thirty-one infants with nonsyndromic unilateral complete cleft lip and palate were randomly assigned to either no treatment (control) or taping groups. In the taping group, all infants received horizontal tape between the two labial segments, aiming to decrease the cleft gap. No other interventions were performed in this group. Standardized photographs and videos were taken of the infants in both groups at the beginning of the treatment (T1), directly before surgical lip repair (T2), and 2 weeks after surgical lip repair (T3). Photographs and shots from videos were calibrated and used for outcome assessment. Blinded assessors carried out all the measurements digitally on the standardized photographs at T1, T2, and T3 using computer software. RESULTS: Significant changes in all the measurements were recorded in the taping group at T2 before surgical lip repair in comparison with the control group. At T3, no differences were found between the two groups. CONCLUSIONS: Taping is a successful intervention in changing nose and lip aesthetics before surgical lip repair. After surgical lip repair, both groups had matching aesthetics. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, I.
Asunto(s)
Labio Leporino , Fisura del Paladar , Lactante , Humanos , Labio Leporino/cirugía , Fisura del Paladar/cirugía , Estudios Prospectivos , Nariz/cirugía , Estética , Resultado del TratamientoRESUMEN
OBJECTIVE: To systematically review studies on canine agenesis prevalence in different populations and continents, based on the jaw, sex, location, and associated dental anomalies. METHODS: Electronic and hand searches of English literature in PubMed, Web of Science, Scopus, OpenGrey, and Science Direct were conducted, and the authors were contacted when necessary. Observational studies (population-based, hospital/clinic-based, and cross-sectional) were included. For study appraisal and synthesis, duplicate selection was performed independently by two reviewers. Study quality was assessed using a modified Strengthening the Reporting of Observational Studies in Epidemiology checklist, with main outcome of prevalence of canine agenesis. RESULTS: The global population prevalence of canine agenesis was 0.30% (0.0-4.7%), highest in Asia (0.54%), followed by Africa (0.33%), and the least in Europe and South America (0.19% in both continents). Canine agenesis was more common in the maxilla (88.57%), followed by both maxilla and mandible (8.57%), and the least common was mandible-only presentation (2.86%). The condition was more common in females (female:male ratio = 1.23), except in Asia (female:male ratio = 0.88) and Africa (female:male ratio = 1). In Asia, unilateral agenesis was almost twice as prevalent as bilateral, but in Europe, the bilateral form was more common. CONCLUSIONS: The overall prevalence of canine agenesis is 0.30%, with the highest prevalence in Asia, followed by Africa, Europe, and South America. The condition is more common in the maxilla than the mandible, and in females than males (except in Asia and Africa), with unilateral agenesis being more common in Asia and the bilateral form showing a greater prevalence in Europe.
RESUMEN
INTRODUCTION: Fixed functional appliances are non-compliant solutions to Class II malocclusion treatment. The clinician, however, should be careful of unexpected complications during the therapy. METHODS: 58 female adolescents who presented with Class II malocclusion due to deficient mandible were treated with Forsus Fatigue Resistant Device (FFRD) therapy until an overcorrection to an edge to edge incisor relationship was achieved. RESULTS: Incisor relationship and overjet were corrected successfully in all the subjects. Twenty-two patients had a complications-free treatment, while several complications were encountered with the remaining 36 subjects. In particular, mandibular canine rotation and development of posterior crossbites were the most common complications, with percentages of 51.7% and 25.9% respectively. Other complications included the breakage and shearing of the extraoral tubes of the first molar bands, and excessive intrusion of the upper first molars. CONCLUSIONS: FFRD is an efficient appliance for treatment of Class II malocclusion; however, different complications were encountered during the appliance therapy. A focus on taking precautions and applying preventive measures can help to avoid such problems, reducing the number of emergency appointments and enhancing the treatment experience with the appliance.
Asunto(s)
Maloclusión Clase II de Angle , Aparatos Ortodóncicos Funcionales , Sobremordida , Adolescente , Cefalometría , Femenino , Humanos , Mandíbula , Diseño de Aparato OrtodóncicoAsunto(s)
Maloclusión Clase II de Angle/terapia , Desarrollo Maxilofacial/fisiología , Diente Premolar/patología , Cefalometría/métodos , Niño , Arco Dental/crecimiento & desarrollo , Arco Dental/patología , Aparatos de Tracción Extraoral , Humanos , Masculino , Mandíbula/crecimiento & desarrollo , Mandíbula/patología , Maxilar/crecimiento & desarrollo , Maxilar/patología , Métodos de Anclaje en Ortodoncia/métodos , Diseño de Aparato Ortodóncico , Técnicas de Movimiento Dental/instrumentación , Técnicas de Movimiento Dental/métodos , Diente Impactado/terapiaRESUMEN
OBJECTIVE: To elucidate the positional and dimensional temporomandibular joint (TMJ) changes after correction of posterior crossbite in growing patients. MATERIALS AND METHODS: A systematic unrestricted search was done in six databases until June 27, 2017. A manual search in the reference lists of the included studies and gray literature was also performed. The eligibility criteria included randomized controlled trials and prospective nonrandomized controlled clinical trials and a sample of growing subjects with posterior crossbite that required maxillary expansion. Risk of bias assessment was performed using Cochrane's Risk of Bias Tool. The literature search, study inclusion, risk of bias assessment, evaluation of quality of evidence (GRADE), and data extraction were performed by two reviewers independently. RESULTS: Only two articles were finally eligible to be included in the qualitative analysis. Both studies were RCTs and were assessed as having unclear risk of bias. Meta-analysis was not possible since one study used cone-beam computed tomography as an assessment tool while the other used ultrasonography. One study reported significant reduction in the condylar positional difference between centric and habitual occlusion in the treatment group, while no spontaneous correction of condylar asymmetric position occurred in the control group. The other study reported minor changes of condylar position in both treatment and control groups. CONCLUSIONS: The current available data provide insufficient and weak evidence to form a solid and firm conclusion. There is poor, very low-quality evidence regarding the positional and dimensional effects of posterior crossbite correction on the TMJs.
Asunto(s)
Maloclusión/terapia , Técnica de Expansión Palatina , Articulación Temporomandibular/patología , Niño , Preescolar , Humanos , Maloclusión/patologíaRESUMEN
OBJECTIVE: To detect three-dimensionally the effects of using mini-implant anchorage with the Forsus Fatigue Resistant Device (FFRD). MATERIALS AND METHODS: The sample comprised 43 skeletal Class II females with deficient mandibles. They were randomly allocated into three groups: 16 patients (13.25 ± 1.12 years) received FFRD alone (Forsus group), 15 subjects (13.07 ± 1.41 years) received FFRD and mini-implants (FMI group), and 12 subjects (12.71 ± 1.44 years) were in the untreated control group. Three-dimensional analyses of cone beam computed tomographic images were completed, and the data were statistically analyzed. RESULTS: Class I relationship and overjet correction were achieved in 88% of the cases. None of the two treatment groups showed significant mandibular skeletal effects. In the FMI group, significant headgear effect, decrease in maxillary width, and increase in the lower facial height were noted. In the FMI group, retroclination of maxillary incisors and distalization of maxillary molars were significantly higher. Proclination and intrusion of mandibular incisors were significantly greater in the Forsus group. CONCLUSIONS: FFRD resulted in Class II correction mainly through dentoalveolar effects and with minimal skeletal effects. Utilization of mini-implant anchorage effectively reduced the unfavorable proclination and intrusion of mandibular incisors but did not produce additional skeletal effects.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Implantes Dentales , Mandíbula/diagnóstico por imagen , Métodos de Anclaje en Ortodoncia/instrumentación , Aparatos Ortodóncicos , Adolescente , Niño , Atención Odontológica , Femenino , Humanos , Incisivo , Mandíbula/patología , Diente MolarRESUMEN
ABSTRACT Introduction: Fixed functional appliances are non-compliant solutions to Class II malocclusion treatment. The clinician, however, should be careful of unexpected complications during the therapy. Methods: 58 female adolescents who presented with Class II malocclusion due to deficient mandible were treated with Forsus Fatigue Resistant Device (FFRD) therapy until an overcorrection to an edge to edge incisor relationship was achieved. Results: Incisor relationship and overjet were corrected successfully in all the subjects. Twenty-two patients had a complications-free treatment, while several complications were encountered with the remaining 36 subjects. In particular, mandibular canine rotation and development of posterior crossbites were the most common complications, with percentages of 51.7% and 25.9% respectively. Other complications included the breakage and shearing of the extraoral tubes of the first molar bands, and excessive intrusion of the upper first molars. Conclusions: FFRD is an efficient appliance for treatment of Class II malocclusion; however, different complications were encountered during the appliance therapy. A focus on taking precautions and applying preventive measures can help to avoid such problems, reducing the number of emergency appointments and enhancing the treatment experience with the appliance.
RESUMO Introdução: Os aparelhos funcionais fixos são uma solução para o tratamento da má oclusão de Classe II em pacientes não colaboradores. Porém, o ortodontista deve estar ciente das complicações inesperadas decorrentes do seu uso. Métodos: Cinquenta e oito pacientes adolescentes do sexo feminino com má oclusão de Classe II por deficiência mandibular foram tratadas com o aparelho Forsus FRD até se alcançar uma sobrecorreção, com relação de topo a topo dos incisivos. Resultados: A relação entre os incisivos e a sobressaliência foram corrigidas com sucesso em todas as pacientes. Vinte e duas pacientes não apresentaram complicações durante o tratamento, enquanto as demais trinta e seis pacientes apresentaram diferentes complicações. As complicações mais comuns foram a rotação do canino inferior e o desenvolvimento de mordida cruzada posterior, com prevalência de 51,7% e 25,9%, respectivamente. As demais complicações incluíram quebra e cisalhamento dos tubos extrabucais das bandas dos primeiros molares, e intrusão excessiva dos primeiros molares superiores. Conclusões: O FRD é um aparelho eficiente para o tratamento da má oclusão de Classe II. No entanto, diferentes complicações foram encontradas durante o uso desse aparelho. O foco na tomada de precauções e em medidas preventivas pode ajudar a evitar tais complicações, reduzindo o número de consultas de emergência e melhorando a experiência do paciente no tratamento com esse aparelho.