Four-mm-short implants in the rehabilitation of posterior atrophic jaws: A retrospective study on 212 patients with a mean follow-up of 8.02 years.

OBJECTIVE: This study aimed to assess clinical efficacy of 4-mm-short implants in patients with posterior severe vertical bone atrophy in the medium- and long-term follow-up. MATERIALS AND METHODS: Patients rehabilitated with 4-mm-short implants in the posterior atrophic jaws, with a minimum follow-up of 3 years post-loading, were included in the study. Data were collected for eligible patients, and marginal bone loss (MBL) for each implant was evaluated. The research outcomes were implant failure, MBL and complications. RESULTS: A total of 212 patients with 496 implants were included, resulting in a mean follow-up of 8.02 ± 2.17 years. The implant survival rate was 95.36% (95% CI: 93.12%-97.04%). More implant failures were observed in the maxilla (p = .02) and fewer failures were observed in patients undergoing more number of hygienic sessions per year (p < .001). The average MBL after 1-year-loading was 0.47 mm, increasing to 0.59 mm after 10 years; after 3 years no statistically significant increase in MBL was observed. Maxillary implants showed greater bone loss than mandibular ones (p < .001). More frequent professional oral hygiene sessions per year resulted being related with reduced MBL (p < .001). CONCLUSIONS: Four-mm-short implants showed high survival rates with an up to 10-year follow-up. Their use can offer a fixed prosthetic solution for patients with posterior vertical bone atrophy, minimizing surgical invasiveness, rehabilitative times and costs.

What is the Incidence of Late Complications Associated With Lower Third Molar Coronectomy? 10-Year Follow-Up Results.

PURPOSE: Coronectomy is an operation to manage impacted third molars (M3s) considered at high risk for mandibular nerve injury but long-term outcomes are still lacking. The purpose of this study was to estimate the risk of late complications occurring within 10 years following lower M3 coronectomy. METHODS: The investigators designed a prospective cohort study and enrolled a sample of 94 patients treated with coronectomy of third mandibular molars at the Unit of Oral and Maxillofacial Surgery of the University of Bologna, from 2009 to 2012. This follow-up study included all of the patients from the original study who completed 10 years of follow-up. The primary outcome variables is postoperative late complication occurring between 5 and 10 years after coronectomy coded as present or absent. Late complications were defined as root exposure, nerve injury, pulpitis, periapical infection, and reoperation. The secondary outcome variable was probing pocket depth. Covariates examined were age, smoking and type of M3 impaction. Descriptive statistical analyses were performed. RESULTS: The inception cohort was composed of 94 subjects who had 116 coronectomies (k) completed. The study cohort was composed of subjects with 10 years of follow-up and included 48 subjects (k = 60) with a mean age of 28.99 ± 8.9 years. Between years 5 and 10 of follow-up, 2 subjects (4%) have complications; all root exposures diagnosed at years 8 or 9 after surgery. In another case root removal was required for orthodontics reason. No case of nerve injury to the inferior alveolar nerve occurred, and no periapical infection was observed around the residual roots. The mean 10-year probing pocket depth was 3.31 ± 0.92 mm (1,66-5,66 mm). There were too few complications to identify risk factors for late complications. CONCLUSIONS: Within all the limitations of this study, the results of this prospective study imply that coronectomy is a useful surgical technique for the treatment of M3s at high neurological risk, to avoid nerve injury to the inferior alveolar nerve. In addition, after coronectomy, retained roots did not develop late infection or periapical infection in the long term. However, in a few cases, removal of retained roots was required at 10 years, due to root migration in the oral cavity. The risk for late complications is uncommon, but persistent.

Osteoblasts and Fibroblasts Interaction with a Porcine Acellular Dermal Matrix Membrane.

The use of collagen membranes has remained the gold standard in GTR/GBR. In this study, the features and the biological activities of an acellular porcine dermis collagen matrix membrane applicable during dental surgery were investigated, and also by applying hydration with NaCl. Thus, two tested membranes were distinguished, the H-Membrane and Membrane, compared to the control cell culture plastic. The characterization was performed by SEM and histological analyses. In contrast, the biocompatibility was investigated on HGF and HOB cells at 3, 7, and 14 days by MTT for proliferation study; by SEM and histology for cell interaction study; and by RT-PCR for function-related genes study. In HOBs seeded on membranes, mineralization functions by ALP assay and Alizarin Red staining were also investigated. Results indicated that the tested membranes, especially when hydrated, can promote the proliferation and attachment of cells at each time. Furthermore, membranes significantly increased ALP and mineralization activities in HOBs as well as the osteoblastic-related genes ALP and OCN. Similarly, membranes significantly increased ECM-related and MMP8 gene expression in HGFs. In conclusion, the tested acellular porcine dermis collagen matrix membrane, mainly when it is hydrated, behaved as a suitable microenvironment for oral cells.

Hygienic maintenance in patients with maxillae atrophy and in oncological patients with maxillary resection rehabilitated with zygomatic implants: A nested monocentric prospective cohort study.

OBJECTIVE: To assess peri-implant soft tissues condition, comparing clinical parameters of implants placed in patients with atrophic upper jaws and patients who underwent maxillary resection for oncological reasons. BACKGROUND: Zygomatic implants (ZIs) in oncologic patients could be affected by more complications compared to implants placed in atrophic maxillae. The soft tissue condition is an essential requirement for implant success, but few studies have investigated this topic. METHODS: A nested monocentric prospective parallel cohort (atrophic vs. oncological patients) study was performed. Clinical visits and professional hygiene sessions were performed every three months, and bleeding on probing (BOP), probing pocket depth (PPD), gingival index (GI), plaque index (PI) and implant mobility were recorded by a blind outcome assessor. RESULTS: In total, 77 ZIs placed in 21 patients were evaluated: 54 (70.1%) ZIs were inserted in patients belonging to the atrophic cohort (PAM) and 23 (29.9%) ZIs in the oncologic cohort (OP). The probability of having BOP at the considered mean follow-up (27 months) was 24.8% (95% CI 19.0-31.9) for PAM and 22.9% (95% CI 15.1-33.9) OP. The mean PPD values were 2.78 ± 1.28 (range 1-8) in PAM and 2.91 ± 1.98 (range 0-10) in OP. None of the implants showed mobility. No associations between group belongingness and the entity of PPD, PI, GI and the risk of BOP were found, adjusting for the considered confounding factors (age, smoking and implant position). CONCLUSIONS: Under a strict supportive hygiene therapy protocol ZIs in oncologic patients showed similar peri-implant tissue conditions to that of patients with maxillary atrophy.

Guided bone regeneration using titanium mesh to augment 3-dimensional alveolar defects prior to implant placement. A pilot study.

OBJECTIVES: To evaluate the outcomes of bone regeneration using a customized titanium mesh scaffold to cover a bone graft for reconstruction of complex defects of the jaws. MATERIALS AND METHODS: 19 large defects were digitally reconstructed using CT scans according to the prosthetic requirements. A titanium mesh scaffold was designed to cover the bone (autologous/bovine bone particulate) graft. At least 6 months after surgery, a new cone-beam CT was taken. The pre- and postoperative CT datasets were then converted into three-dimensional models and digitally aligned. The actual mesh position was compared to the virtual position to assess the reliability of the digital project. The reconstructed bone volumes (RBVs) were calculated according to the planned bone volumes (PBVs), outlining the areas under the mesh. These values were then correlated with the number of exposures, locations of atrophy, and virtually planned bone volume. RESULTS: The mean matching value between the planned position of the mesh and the actual one was 82 ± 13.4%. 52.3% (40% early and 60% late) exposures were observed, with 15.8% exhibiting infection. 26.3% resulted as failures. The amount of reconstructed bone volume (RBV) in respect to PBV was 65 ± 40.5%, including failures, and 88.2 ± 8.32% without considering the failures. The results of the exposure event were statistically significant (p = .006) in conditioning the bone volume regenerated. CONCLUSIONS: This study obtained up to 88% of bone regeneration in 74% of the cases. The failures encountered (26%) should underline the operator's expertise relevance in conditioning the final result.

Soft-tissue dehiscence coverage at peri-implant sites.

Soft-tissue dehiscence at the facial aspect of an osteointegrated implant is a common complication which impacts on the final esthetic result. The etiology and ways of diagnosing this condition are still controversial. Many factors seem to influence the position of the peri-implant soft-tissue margin, and some of these have been studied more carefully than others. Various surgical and combination surgical-prosthetic approaches have been described to treat soft-tissue dehiscence, with the latter appearing to be more predictable. This paper focuses on the factors affecting peri-implant soft-tissue margins and describes the different treatment approaches, reported in the literature, to treat buccal soft-tissue dehiscence, with more focus on the prosthetic-surgical-prosthetic approach.

Esthetic treatment of altered passive eruption.

Altered passive eruption is described as a condition in which the relationship between teeth, alveolar bone and soft tissues creates an excessive display of gingiva, commonly known as a 'gummy smile'. While there are authors who consider altered passive eruption to be a risk to periodontal health, its impact is greatest in terms of oral esthetics. The aim of periodontal management in such cases is not only to improve patient esthetics but also to restore periodontal health by re-establishing the normal relationship between the gingival margin, alveolar bone crest and cemento-enamel junction. The aim of this article is to present a narrative review of the etiology, classification and management of altered passive eruption.

Decision making in root-coverage procedures for the esthetic outcome.

The primary indication for treatment of gingival recessions is esthetics. In the last decades, patients have become increasingly more demanding in the esthetic outcome expected. In order to obtain a successful final result, periodontal plastic surgery should provide not only complete root coverage but also perfect blending in terms of color and texture. In the literature, many techniques have been demonstrated to be effective in obtaining complete root coverage, and the selection of one surgical technique over another depends on several factors related to the anatomic characteristics of the defect. The purpose of this paper was to suggest a decision-making process which starts from the clinical observation of the defects and is structured in progressive nodes that will guide the clinician through the most suitable surgical technique to achieve the ideal esthetic outcome.

Esthetic evaluation and patient-centered outcomes in single-tooth implant rehabilitation in the esthetic area.

Criteria for successful implants, in the rehabilitation of a single missing tooth in the esthetic area, should be determined by composite outcomes, including functional and esthetic aspects of soft tissues and the reconstruction, as well as patient-reported outcomes. This paper focuses on current methods in esthetic assessment and patient-centered/reported outcomes in single-tooth implant rehabilitation in the esthetic area. The relationship between subjective, patient-based esthetic evaluations and objective, professional-based esthetic evaluations is reviewed. In spite of increasing interest in the assessment of 'success' in implant dentistry, it is not yet possible to provide evidence-based conclusions because of the lack of consensus on a universal implant-supported crown esthetic index. There is also a need to standardize reporting of patient-centered outcomes in partially edentulous patients treated with implants.

Use of platelet-rich fibrin in regenerative dentistry: a systematic review.

OBJECTIVES: Research across many fields of medicine now points towards the clinical advantages of combining regenerative procedures with platelet-rich fibrin (PRF). This systematic review aimed to gather the extensive number of articles published to date on PRF in the dental field to better understand the clinical procedures where PRF may be utilized to enhance tissue/bone formation. MATERIALS AND METHODS: Manuscripts were searched systematically until May 2016 and separated into the following categories: intrabony and furcation defect regeneration, extraction socket management, sinus lifting procedures, gingival recession treatment, and guided bone regeneration (GBR) including horizontal/vertical bone augmentation procedures. Only human randomized clinical trials were included for assessment. RESULTS: In total, 35 articles were selected and divided accordingly (kappa = 0.94). Overall, the use of PRF has been most investigated in periodontology for the treatment of periodontal intrabony defects and gingival recessions where the majority of studies have demonstrated favorable results in soft tissue management and repair. Little to no randomized clinical trials were found for extraction socket management although PRF has been shown to significantly decrease by tenfold dry sockets of third molars. Very little to no data was available directly investigating the effects of PRF on new bone formation in GBR, horizontal/vertical bone augmentation procedures, treatment of peri-implantitis, and sinus lifting procedures. CONCLUSIONS: Much investigation now supports the use of PRF for periodontal and soft tissue repair. Despite this, there remains a lack of well-conducted studies demonstrating convincingly the role of PRF during hard tissue bone regeneration. Future human randomized clinical studies evaluating the use of PRF on bone formation thus remain necessary. CLINICAL RELEVANCE: PRF was shown to improve soft tissue generation and limit dimensional changes post-extraction, with little available data to date supporting its use in GBR.

Safe New Approach to the Lingual Flap Management in Mandibular Augmentation Procedures: The Digitoclastic Technique.

PURPOSE: This article describes the digitoclastic technique, an innovative procedure for coronal displacement of the lingual flap. The new technique has the potential to obtain primary flap closure without surgical risks to the anatomical structures on the lingual side of the mandible. MATERIALS AND METHODS: Reconstruction of an atrophic mandible with guided tissue regeneration (guided bone regeneration) and implant placement is described, using the digitoclastic technique to displace the lingual flap coronally. RESULTS: Coronal flap displacement was sufficient to obtain complete passive coverage of the grafted area. No bleeding or neurosensory complications were recorded, and no membrane exposure occurred. CONCLUSIONS: The digitoclastic technique reduces the risk of damage to the lingual nerve and minimizes the amount of bleeding during surgery, allowing progressive and controlled retraction of the flap until the desired detachment is achieved.

Stage Characterization and Marginal Bone Loss Evaluation Up to 96 Months of Crestal Sinus Augmentation With Sequential Drills: A Retrospective Study.

INTRODUCTION: The 2-stage crestal approach to augment the maxillary sinus is a little-used technique. The aim of this retrospective study was to assess events characterizing stages of this technique after implant placement in the posterior maxilla with residual bone height less than 4 mm and evaluate the marginal bone loss (MBL) changes over time. MATERIAL AND METHODS: Thirty-three patients underwent unilateral sinus augmentations using the trancrestal technique with mineralized allograft. Six-months (6 m) after first surgery, if skeletal subsidence prevented insertion of a 10-mm-length implant, additional grafting was performed during implant (n = 33) insertion. Radiographs were taken before grafting (baseline), immediately after and at 6 months; immediately after and 6 months after implant placement; and at follow-up (24-96 m). RESULTS: One implant was lost (ISR = 96.97%). Of the remaining 32 patients, 14 (A group) underwent standard implant placement, whereas 18 (B group) underwent additional grafting immediately before implant placement. Given that B-group patients initially obtained lower crestal bone height after first surgery, additional grafting procedures provided greater crestal height in the B group. A significant relationship between ending (eMBL) and 6mMBL was found in both groups, with greater values in the B group. However, in both groups, eMBL was always greater if 6mMBL was greater than 0.44 mm. DISCUSSION: Results suggest a high and low skeletal-reactivity patient categorization. In both patient categories, MBL greatly depends upon 6-month values. Investigations are necessary to relate sinus size with results obtained by this 2-stage crestal approach. CONCLUSIONS: The 2-stage crestal sinus lift procedure not only provides predictable results, but also allows low skeletal-reactivity patient recovery.

Interventions for replacing missing teeth: augmentation procedures of the maxillary sinus.

BACKGROUND: Insufficient bone volume is a common problem encountered in the rehabilitation of the edentulous posterior maxillae with implant-supported prostheses. Bone volume is limited by the presence of the maxillary sinus together with loss of alveolar bone height. Sinus lift procedures increase bone volume by augmenting the sinus cavity with autogenous bone or commercially available biomaterials, or both. This is an update of a Cochrane review first published in 2010. OBJECTIVES: To assess the beneficial or harmful effects of bone augmentation compared to no augmentation when undertaking a sinus lift procedure. Secondly, to compare the benefits and harms of different maxillary sinus lift techniques for dental implant rehabilitation. SEARCH METHODS: We searched the Cochrane Oral Health Group's Trials Register (to 17 January 2014), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2013, Issue 12), MEDLINE via OVID (1946 to 17 January 2014) and EMBASE via OVID (1980 to 17 January 2014). There were no language or date restrictions on the searches of the electronic databases. SELECTION CRITERIA: Randomised controlled trials (RCTs) of different techniques and materials for augmenting the maxillary sinus for rehabilitation with dental implants that report the outcome of implant success or failure at least to four months after initial loading. DATA COLLECTION AND ANALYSIS: Screening of eligible studies, assessment of the risk of bias of the trials, and data extraction were conducted independently and in duplicate. Authors were contacted for any missing information. Results were expressed using fixed-effect models as there were either less than four studies or we used Peto odds ratios (ORs) for dichotomous data when there were zero cells in either the treatment or control or both arms and the number of trials was small. The statistical unit of the analysis was the patient. MAIN RESULTS: Eighteen RCTs out of 64 potentially eligible study reports met the inclusion criteria. They compared undertaking a sinus lift with not doing so, and the use of different sinus lift techniques. There were 650 patients providing data for the outcomes evaluated. Five studies were assessed as low risk of bias, 11 were assessed as high risk of bias, and in two the risk was unclear. Sinus lift versus no sinus lift Four trials of moderate quality (three trials at low and one at high risk of bias) with 102 participants evaluated short implants (5 to 8.5 mm long) as an alternative to sinus lift in bone with residual height between 4 and 9 mm. One year after loading there was insufficient evidence to claim differences between the two procedures for prosthesis failure (OR (Peto) 0.37, 95% confidence interval (CI) 0.05 to 2.68; three trials) or implant failure (OR (Peto) 0.44, 95% CI 0.10 to 1.99; four trials). There was however an increase in complications at treated sites when undertaking the sinus lift (OR (Peto) 4.77, 95% CI 1.79 to 12.71, P value = 0.002; four trials). Different sinus lift techniques Fourteen trials with 548 participants compared different sinus lift techniques. Only three comparisons included more than one trial (two trials for each). These were bone graft versus no bone graft, autogenous bone versus bone substitute, bone graft with or without platelet-rich plasma (PRP). There was insufficient evidence to claim a benefit for any of these techniques for the primary outcomes of prosthesis and implant failure. For the other reported outcomes, in a single study at high risk of bias, only bone gain was greater for the bone graft site than the site without a graft six months after augmentation, however this was not significant at 18 or 30 months.The other comparisons with single studies were rotary versus piezosurgery to open a lateral sinus window, two different bone substitutes, use or not of a membrane to seal the lateral window, one- versus two-stage lateral sinus lift, two-stage granular bone versus one-stage autogenous bone blocks, and crestal versus lateral sinus lift; two trials compared three different crestal sinus lifting techniques: rotatory versus hand malleting (patients preferred rotatory instruments over hand malleting) and hand versus electric malleting. There was no evidence of a benefit for any sinus lift procedure compared to any other for the primary outcomes prosthesis or implant failure. AUTHORS' CONCLUSIONS: There is moderate quality evidence which is insufficient to determine whether sinus lift procedures in bone with residual height between 4 and 9 mm are more or less successful than placing short implants (5 to 8.5 mm) in reducing prosthesis or implant failure up to one year after loading. However, there are more complications at sites treated with sinus lift procedures. Many trials compared different sinus lift procedures and none of these indicated that one procedure reduced prosthetic or implant failures when compared to the other. Based on low quality evidence, patients may prefer rotary instruments over hand malleting for crestal sinus lift.

Posterior atrophic mandible rehabilitation with onlay allograft created with CAD-CAM procedure: a case report.

AIM: Implant rehabilitation of the atrophic right posterior mandible in a 48-year-old woman using dehydrated homologous bone block, shaped with a computer aided design-computer aided manufacturing (CAD-CAM) system, to avoid harvesting of autologous bone block and to assure a perfect fitting of the block above the alveolar crest. RESULTS: After 7 months, 6.09, 7.36, and 8.08 mm (mean, 7.18 mm) of total horizontal bone gain was observed at sites 6, 12, and 18 mm posterior to the right mental foramen, respectively. CONCLUSIONS: The use of a bone block with CAD-CAM system for alveolar ridge augmentation is a valuable alternative to autograft because it reduces time, cost, and complications for the patients. Data from a computerized tomographic scan can be used to shape a precise 3-dimensional homologous bone block using a CAD-CAM system.

Guided "sandwich" technique: a novel surgical approach for safe osteotomies in the treatment of vertical bone defects in the posterior atrophic mandible: a case report.

PURPOSE: A novel technique to perform safe osteotomies during inlay block regenerative procedures in the posterior atrophic mandible is described. MATERIAL AND METHODS: A 52-year-old male patient with vertical atrophy of the left posterior mandible was treated adopting an inlay block "sandwich" technique using an allogenic cancelous block and a mixture of mineralized and demineralized human bone allograft in putty form as graft. The horizontal osteotomy for the lifting of the osteotomized bone segment was performed using a template prepared from a virtual anatomical replica of the patient's mandible obtained from cone beam computed tomography data. In the second surgical phase, 3 months after the augmentation, 2 implants were easily placed. RESULTS: The horizontal osteotomy was carried out, with no risk, very close to the nerve structures after the precise osteotomy line established preoperatively on the three-dimensional computed tomography (3D-CT) virtual reconstruction. No neurological complications were observed in the first days after the procedure, and no subsequent problems were recorded during the 3-month healing period. CONCLUSION: Radiographic evaluations and complication-free clinical healing demonstrate the effectiveness of this technique to obtain safe and precise osteotomies.

The modified "sandwich" technique: a novel surgical approach to regenerative treatment of horizontal bone defects in the posterior atrophic mandible. A case report.

PURPOSE: A new augmentation procedure for bone reconstruction of horizontal defects in a posterior atrophic mandible is described. MATERIALS AND METHODS: A 47-year-old male patient with horizontal atrophy of the left posterior mandible was treated using a 2-stage modified "sandwich" osteotomy technique with an interposed mixture of mineralized and demineralized human bone allograft in putty form. RESULTS: The osteotomized superior segment was slightly raised and then drawn and rotated in the buccal direction to augment the horizontal width of the crest. The osteotomized segment was kept in this position with a titanium miniplate and miniscrews. No complications were reported during the 3-month healing period. In the second surgical phase, 2 implants were correctly placed. CONCLUSIONS: Cone beam computed tomography (CBCT) outcomes confirm the effectiveness of this technique in the treatment of horizontal defects. However, further randomized controlled studies are required to confirm the technique's reliability.

A trabecular metal implant 4 months after placement: clinical-histologic case report.

INTRODUCTION: The aim of this case report was to histologically evaluate the behavior of a trabecular metal (TM) implant composed of titanium and spatial 3-dimensional tantalum (Ta) trabeculae. This study is the first human histologic case report of this implant. CASE PRESENTATION: A TM implant was placed in a 54-year-old woman exhibiting moderate chronic periodontitis. After periodontal treatment, the implant was inserted under favorable clinical conditions. Patient was not seen for 4 months because of unrelated breast reduction surgery. At the surgical reopening, periimplant inflammation affecting the coronal third of the implant was observed 4 months after implant placement. With patient's consent, the implant was removed for histologic analysis. Histology highlighted a greater amount of bone in close contact with Ta trabeculae than titanium surfaces. CONCLUSION: The finding of bone formation around the Ta trabeculae suggests that trabecular metal material promotes bone ingrowth for secondary implant stability. Additional evidence is needed to confirm this observation.

Morpho-functional analysis of the temporomandibular joint following mandible-first bimaxillary surgery with mandible-only patient-specific implants.

The aim of this study was to evaluate condylar and glenoid fossa remodeling after bimaxillary orthognathic surgery guided by patient-specific mandibular implants. In total, 18 patients suffering from dentofacial dysmorphism underwent a virtually planned bimaxillary mandibular PSI-guided orthognathic procedure. One month prior to surgery, patients underwent a CBCT scan and optical scans of the dental arches; these datasets were re-acquired 1 month and at least 9 months postsurgery. Three-dimensional models of the condyles, glenoid fossae, and interarticular surface space (IASS) were obtained and compared to evaluate the roto-translational positional discrepancy and surface variation of each condyle and glenoid fossa, and the IASS variation. The condylar position varied by an average of 4.31° and 2.18 mm, mainly due to surgically unavoidable ramus position correction. Condylar resorption remodeling was minimal (average ≤ 0.1 mm), and affected skeletal class III patients the most. Later condylar remodeling was positively correlated with patient age. No significant glenoid fossa remodeling was observed. No postoperative orofacial pain was recorded at clinical follow-up. The procedure was accurate in minimizing the shift in relationship between the bony components of the TMJ and their remodeling, and was effective in avoiding postoperative onset of orofacial pain. An increase in sample size, however, would be useful to confirm our findings.

Accuracy of semi-occlusive CAD/CAM titanium mesh using the reverse guided bone regeneration digital protocol: A preliminary clinical study.

PURPOSE: The reverse guided bone regeneration protocol is a digital workflow that has been introduced to reduce the complexity of guided bone regeneration and promote prosthetically guided bone reconstruction with a view to achieving optimal implant placement and prosthetic finalisation. The aim of the present study was to investigate the accuracy of this digital protocol. MATERIALS AND METHODS: Sixteen patients with partial edentulism in the maxilla or mandible and with vertical or horizontal bone defects were treated using the reverse guided bone regeneration protocol to achieve fixed implant rehabilitations. For each patient, a digital wax-up of the future rehabilitation was created and implant planning was carried out, then the necessary bone reconstruction was simulated virtually and the CAD/CAM titanium mesh was designed and used to perform guided bone regeneration. The computed tomography datasets from before and after guided bone regeneration were converted into 3D models and aligned digitally. The actual position of the mesh was compared to the virtual position to assess the accuracy of the digital project. Surgical and healing complications were also recorded. A descriptive analysis was conducted and a one-sample t test and Wilcoxon test were utilised to assess the statistical significance of the accuracy. The level of significance was set at 0.05. RESULTS: A total of 16 patients with 16 treated sites were enrolled. Comparing the virtually planned mesh position with the actual position, an overall mean discrepancy between the two of 0.487 ± 0.218 mm was achieved. No statistically significant difference was observed when comparing this to a predefined minimum tolerance (P = 0.06). No surgical complications occurred, but two healing complications were recorded (12.5%). CONCLUSION: Within the limitations of the present study, the reverse guided bone regeneration digital protocol seems to be able to achieve good accuracy in reproducing the content of the virtual plan. Nevertheless, further clinical comparative studies are required to confirm these results.

Indications for implant-supported rehabilitation of the posterior atrophic maxilla: A multidisciplinary consensus among experts in the field utilising the modified Delphi method.

PURPOSE: To establish consensus-driven guidelines that could support the clinical decision-making process for implant-supported rehabilitation of the posterior atrophic maxilla and ultimately improve long-term treatment outcomes and patient satisfaction. MATERIALS AND METHODS: A total of 33 participants were enrolled (18 active members of the Italian Academy of Osseointegration and 15 international experts). Based on the available evidence, the development group discussed and proposed an initial list of 20 statements, which were later evalu-ated by all participants. After the forms were completed, the responses were sent for blinded ana-lysis. In most cases, when a consensus was not reached, the statements were rephrased and sent to the participants for another round of evaluation. Three rounds were planned. RESULTS: After the first round of voting, participants came close to reaching a consensus on six statements, but no consensus was achieved for the other fourteen. Following this, nineteen statements were rephrased and sent to participants again for the second round of voting, after which a consensus was reached for six statements and almost reached for three statements, but no consensus was achieved for the other ten. All 13 statements upon which no consensus was reached were rephrased and included in the third round. After this round, a consensus was achieved for an additional nine statements and almost achieved for three statements, but no consensus was reached for the remaining statement. CONCLUSION: This Delphi consensus highlights the importance of accurate preoperative planning, taking into consideration the maxillomandibular relationship to meet the functional and aesthetic requirements of the final restoration. Emphasis is placed on the role played by the sinus bony walls and floor in providing essential elements for bone formation, and on evaluation of bucco-palatal sinus width for choosing between lateral and transcrestal sinus floor elevation. Tilted and trans-sinus implants are considered viable options, whereas caution is advised when placing pterygoid implants. Zygomatic implants are seen as a potential option in specific cases, such as for completely edentulous elderly or oncological patients, for whom conventional alternatives are unsuitable.