Study on the mechanism of lignin non-productive adsorption on cellobiohydrolase.

Enzymatic hydrolysis is important for lignocellulosic biomass conversion into fermentable sugars. However, the nonproductive adsorption of enzyme on lignin was major hinderance for the enzymatic hydrolysis efficiency. In this study, non-productive adsorption mechanism of cellulase component cellobiohydrolase (CBH) onto lignin was specific investigated. Research revealed that the adsorption behavior of CBH on eucalyptus alkali lignin (EuA) was affected by reaction conditions. As study on the adsorption kinetic, it was indicated that the adsorption cellulose binding domain (CBD) of CBH onto EuA well fitted with Langmuir adsorption model and pseudo second-order adsorption kinetics model. And the tyrosine site related to the adsorption of CBD onto lignin was proved by the fluorescence and UV spectra analysis. The results of this work provide a theoretical guidance to understanding the nonproductive adsorption mechanism and building method to reduce the adsorption of cellulase on the lignin.

A biocompatible silicon nitride dental implant material prepared by digital light processing technology.

For decades, titanium has been the preferred material for dental implant fabrication. However, metallic ions and particles can cause hypersensitivity and aseptic loosening. The growing demand for metal-free dental restorations has also promoted the development of ceramic-based dental implants, such as silicon nitride. In this study, silicon nitride (Si3N4) dental implants were fabricated for biological engineering by photosensitive resin based digital light processing (DLP) technology, comparable to conventionally produced Si3N4 ceramics. The flexural strength was (770 ± 35) MPa by the three-point bending method, and the fracture toughness was (13.3 ± 1.1) MPa · m1/2 by the unilateral pre-cracked beam method. The elastic modulus measured by the bending method was (236 ± 10) GPa. To confirm whether the prepared Si3N4 ceramics possessed good biocompatibility, in vitro biological experiments were performed with the fibroblast cell line L-929, and preferable cell proliferation and apoptosis were observed at the initial stages. Hemolysis test, oral mucous membrane irritation test, and acute systemic toxicity test (oral route) further confirmed that the Si3N4 ceramics did not exhibit hemolysis reaction, oral mucosal stimulation, or systemic toxicity. The findings indicate that Si3N4 dental implant restorations with personalized structures prepared by DLP technology have good mechanical properties and biocompatibility, which has great application potential in the future.

Effects of plastic film mulching on the spatiotemporal distribution of soil water, temperature, and photosynthetic active radiation in a cotton field.

Plastic film mulching (PFM) affects the spatiotemporal distribution of soil moisture and temperature, which in turn affects cotton growth and the spatiotemporal distribution of canopy photosynthetically active radiation (PAR). Due to the spatial heterogeneity of soil moisture, temperature and limited monitoring methods, the issues such as relatively few sampling points and long sampling intervals in most existing studies prevent the accurate quantification of spatiotemporal changes in moisture and temperature along soil profile. To investigate the effects of PFM on spatiotemporal changes in soil moisture, temperature, and canopy PAR in cotton fields, two field trials of plastic film-mulched (M) and nonmulched (NM) cultivations were performed in 2018 and 2019. The grid method was used for the soil information continuous monitoring and multiple-time fixed-site canopy PAR monitoring during the duration of cotton growth. Two-year field trial data showed that, M cultivation increased soil moisture by approximately 13.6%-25% and increased temperature by 2-4 °C in the 0-50 cm soil layer before the first irrigation (June 20) and by 1-2 °C in the 70-110 cm soil layer, compared with NM cultivation. In addition, the temperature difference between the two treatments gradually decreased with the increase in irrigation and air temperature. The M treatment reached the peak PAR interception rate 10 days earlier than the NM treatment. In 2018 and 2019, the PAR peak value under the M treatment was 4.62% and 1.8% higher than that under the NM treatment, respectively, but the PAR interception rate was decreased rapidly in the late growth stage. Overall, PFM had an effect on soil moisture retention during the whole growth period and greatly increased the soil temperature before budding stage, thus promoted the early growth of cotton. Considering this, we suggest that the irrigation quota and frequency could be appropriately decreased in the case of plastic film mulching cultivation. For nonmulching cultivation, the irrigation quota and frequency should be increased, and it is necessary to take measures to improve the soil temperature before middle July.

High-efficiency degradation of phthalic acid esters (PAEs) by Pseudarthrobacter defluvii E5: Performance, degradative pathway, and key genes.

Phthalic acid esters (PAEs) are a class of biologically accumulated carcinogenic and teratogenic toxic chemicals that exist widely in the environment. This study, Pseudarthrobacter defluvii E5 was isolated from agricultural soils and showed efficient PAEs-degradation and -mineralization abilities for five PAEs, and encouraging PAEs tolerance and bioavailable range for dibutyl phthalate (DBP) and bis(2-ethylhexyl) phthalate (DEHP) (0.25-1200 mg/L). The complete catalytic system in E5 genome enables PAEs to be degraded into monoester, phthalate (PA) and Protocatechuic acid (PCA), which eventually enter the tricarboxylic acid cycle (TCA cycle). The preferred PAEs-metabolic pathway in soil by E5 is the metabolism induced by enzymes encoded by pehA, mehpH, pht Operon and pca Operon. For the first time, two para-homologous pht gene clusters were found to coexist on the plasmid and contribute to PAEs degradation. Further study showed that P. defluvii E5 has a broad application prospect in microplastics-contaminated environments.

Taguchi's methods to optimize the properties and bioactivity of 3D printed polycaprolactone/mineral trioxide aggregate scaffold: Theoretical predictions and experimental validation.

Mineral trioxide aggregate (MTA) can provide bioactivity to poly-caprolactone (PCL), which is an inert polymer used to print scaffolds. However, testing all combinations of scaffold characteristics (e.g., composition, pore size, and distribution) to optimize properties of scaffolds is time-consuming and costly. The Taguchi's methods can identify characteristics that have major influences on the properties of complex designs, hence decreasing the number of combinations to be tested. The objective was to assess the potential of Taguchi's methods as a predictive tool for the optimization of bioactive scaffold printed using electro-hydro dynamic jetting. A three-level approach assessed the influence of PCL/MTA proportion, pore size, fiber dimension and number of layers in pH, degradation rate, porosity, yield strength, and Young's modulus. Data were analyzed using Tukey's honest significant difference test, analysis of mean and signal-to-noise ratio (S/N) test. Cytocompatibility and differentiation potential were assessed for 5 and 30 days using dental pulp stem cells and analyzed with one-way analysis of variance (proliferation) or Mann-Whitney (qPCR). The S/N ratio and analysis of mean showed that fiber diameter and composition were the most influential characteristics in all properties. The experimental data confirmed that the addition of MTA to PCL increased the pH and scaffold degradation. Only PCL and PCL with 4% MTA allowed cell proliferation. The latter increased the genetic expression of ALP, COL-1, OCN, and MSX-1. The theoretical predictions were confirmed by the experiments. The Taguchi's identified the inputs that can be disregarded to optimize 3D printed meshed bioactive scaffolds.

Biomaterial-assisted scalable cell production for cell therapy.

Cell therapy, the treatment of diseases using living cells, offers a promising clinical approach to treating refractory diseases. The global market for cell therapy is growing rapidly, and there is an increasing demand for automated methods that can produce large quantities of high quality therapeutic cells. Biomaterials can be used during cell production to establish a biomimetic microenvironment that promotes cell adhesion and proliferation while maintaining target cell genotype and phenotype. Here we review recent progress and emerging techniques in biomaterial-assisted cell production. The increasing use of auxiliary biomaterials and automated production methods provides an opportunity to improve quality control and increase production efficiency using standardized GMP-compliant procedures.

Applications of additive manufacturing in dentistry: A review.

Additive manufacturing (AM) or 3D printing has been hailed as the third industrial revolution as it has caused a paradigm shift in the way objects have been manufactured. Conventionally, converting a raw material to a fully finished and assembled, usable product comprises several steps which can be eliminated by using this process as functional products can be created directly from the raw material at a fraction of the time originally consumed. Thus, AM has found applications in several sectors including automotive, aerospace, printed electronics, and healthcare. AM is increasingly being used in the healthcare sector, given its potential to fabricate patient-specific customized implants with required accuracy and precision. Implantable heart valves, rib cages, and bones are some of the examples where AM technologies are used. A vast variety of materials including ceramics, metals, polymers, and composites have been processed to fabricate intricate implants using 3D printing. The applications of AM in dentistry include maxillofacial implants, dentures, and other prosthetic aids. It may also be used in surgical training and planning, as anatomical models can be created at ease using AM. This article gives an overview of the AM process and reviews in detail the applications of 3D printing in dentistry. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2058-2064, 2018.

Clinical evaluations of mineralized collagen in the extraction sites preservation.

The purpose of this study was to explore the different effects between biomimetic mineralized collagen (MC) and ordinary physically blended hydroxyapatite/collagen (HA/Col) composite in evaluating new bone formation and regenerated bone height in human extraction sockets. Thirty-four patients who cannot retain teeth caused by trauma or decay were randomly selected from Department of Stomatology of Dongzhimen Hospital from December 2013 to December 2014. The patients were randomly divided into two groups. After the operation of tooth extraction, 17 patients were implanted with biomimetic MC (MC group), and other 17 patients were implanted with ordinary physically blended nHA/Col composite (nHA/Col group). X-ray positioning projection by auto-photographing was taken to test the distance between the lowest position and the neighboring CEJm-CEJd immediately, 1 month and 3 months after the operation. The height of new bone formation of the MC group was significantly higher than the nHA/Col group. Biomimetic MC showed better clinical outcomes in the bone formation for extraction site preservation and would have broad application prospect in the field of oral and maxillofacial surgeries.

Pathology of lymph nodes from patients with breast implants: a histologic and spectroscopic evaluation.

There are only a few published reports describing the pathology of regional lymph nodes from patients with silicone breast implants. Systematic analytical chemical verification of foreign material has not previously been reported. In this study, biopsies of regional lymph nodes from 96 patients with breast implants were studied using conventional histology as well as laser-Raman microprobe spectroscopy and Fourier transform infrared microspectroscopy. Lymph nodes from 12 patients without implants served as negative controls. Foamy macrophages, ranging from rare scattered cells to confluent sheets, were observed in sections of lymph nodes from 91 patients with implants and only rare foamy macrophages were observed in sections from 4 patients without implants. Refractile material consistent with silicone was observed in sections from 86 patients with implants and in no sections from patients without implants. Fragments of foreign material consistent with polyurethane were observed in sections from 16 patients with implants and in no sections from patients without implants. Using spectroscopy, the presence of silicone was confirmed in 71 patients with implants, and the presence of polyurethane was confirmed in 2 patients with implants. Spectroscopy was negative for silicone and polyurethane in all patients without implants. In summary, regional lymph nodes from patients with breast implants often have histologic evidence of silicone migration. Characteristic histologic findings include foamy macrophages and refractile droplets of clear material. Polygonal fragments of polyurethane were observed in lymph nodes from a number of patients. This finding has not been previously reported. The presence of silicone and polyurethane was confirmed using confocal laser-Raman microprobe and Fourier transform infrared microspectroscopy. Other than two prior case reports, this is the first confirmatory evidence of silicone migration to lymph nodes in patients with breast implants and this is the first confirmatory report of polyurethane migration to lymph nodes.

Thermogravimetric analysis of lignocellulosic biomass with ionic liquid pretreatment.

Thermogravimetry (TG) was employed to understand the interactions between ionic liquids (ILs) and biomass components. The thermal decomposition profiles of several biomass samples with IL pretreatment at different temperatures were studied by TG. Samples of Avicel (PH101), xylan from beechwood and alkaline lignin as well as switchgrass and corn stover were pretreated using 1-butyl-3-methylimidazolium acetate ([C4mim][OAc]) at temperatures of 50-130°C for 6h. Analysis of TG data provided insight into the mode of degradation of xylan and lignin in [C4mim][OAc]. Pretreated Avicel samples exhibited higher decomposition temperatures due to transformation from cellulose I into cellulose II, while samples of switchgrass and corn stover showed an improved thermal stability as a result of removal of minerals by [C4mim][OAc]. More intensive pretreatment produced decreased thermal resistance due to degradation of biomass components and decrystallization.

[The features of the craniofacial morphology in adult cleft lip and palate patients under Delaire architectural analysis].

OBJECTIVE: To analyze the craniofacial morphology of adult patients with congenital cleft lip and palate using Delaire architectural analysis, and study the influences of early repair surgery to the development of the whole dento-craniofacial-cervicum region. METHODS: 37 adult cleft lip and palate (CLP) patients were chosen and divided into 3 groups according to the operative time and method. The cephalogram were analyzed with Delaire's architectural analysis software, and the results were compared with the database of normal occlusion population, as well as between the groups. RESULTS: 1) There were 3 measurements (MP-F7, L1-MP, ANS-F5) in group A statistically different with control, and 8(Cp-Oi/M-Oi, Pts-M/M-Oi, C1-C4, Me-Met(v), U1-C1, U1-L1, L1-MP, Go-Cp-Got) in group B, 4 (Cp-Oi/M-Oi, U1-L1, L1-MP, Go-Cp-Got) in group C (P < 0.05). 2) There were 2 measurements (C1-C4, U1-C1) statistically different between group A and B, 2 (Pts-Cp/M-Oi, ANS-F5) between group B and C (P < 0.05). There was no statistically different between group A and C (P > 0.05). CONCLUSION: 1) CLP patient shows maxilla hypodevelopment despite whether early surgery conducted or not, and the mandible more or less show a trend of clockwise rotation and a hyperdivergent profile compared. 2) The disease itself can cause deformity of jaw bones, and early repair surgery also has influences to the development of the craniofacial area.

Morphological changes of rhizobia in peat cultures.

Morphological changes that take place in peat cultures of several species of rhizobia were examined. These changes seemed to be associated with enhanced survival of cells in peat and after inoculation onto plastic beads, which were used as a model system for seeds. Cell wall changes, in which the periplasmic space appeared to be occluded with electron-dense material, were observed in Rhizobium sp. strain SU343 and Bradyrhizobium lupini WU425 cells after 7 and 14 days in peat, respectively. Nutrient limitation and low O(2) concentration in peat are suggested to be factors involved in the induction of the morphological changes. Polyhydroxybutyrate reserves, which were present in broth-cultured cells of both species of rhizobia, were mobilized after transfer into peat but did not appear to influence survival after inoculation onto beads. Enhanced expression of an iron-manganese superoxide dismutase was also observed after the cells were transferred into peat. We conclude that cell wall thickening in rhizobia after transfer from broth cultures into peat is an adaptive response for long-term survival under nutrient-limited conditions in peat. Cells with thickened walls may also be more resistant to other types of stress, such as that encountered on a seed surface.