Targeted Theranostic of Cryptococcal Encephalitis by a Novel Polypyridyl Ruthenium Complex.

Cryptococcus neoformans (C. neoformans) is one of the most well-known zoonotic fungal pathogens. Cryptococcal encephalitis remains a major cause of morbidity and mortality in immunocompromised hosts. Effective and targeting killing of C. neoformans in the brain is an essential approach to prevent and treat cryptococcal encephalitis. In this study, a fluorescent polypyridyl ruthenium complex RC-7, {[phen2Ru(bpy-dinonyl)](PF6)2 (phen = 1,10-phenanthroline, bpy-dinonyl = 4,4'-dinonyl-2,2'-bipyridine)}, was screened out, which showed a highly fungicidal effect on C. neoformans. The values of minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) in antifungal activities were significantly lower than fluconazole as the control. Moreover, RC-7 was prepared as a brain-targeting nanoliposome (RDP-liposome; RDP is a peptide derived from rabies virus glycoprotein) for in vivo application. The results revealed that the liposomes could accumulate in the encephalitis brain and play an antifungal role. Compared with the cryptococcal encephalitis model mice, the RDP-liposomes remarkably prolonged the survival days of the encephalitis-bearing mice from 10 days to 24 days. Here, we introduce a polypyridyl ruthenium complex that could be used as a novel antifungal agent, and this study may have a broad impact on the development of targeted delivery based on ruthenium complex-loaded liposomes for theranostics of cryptococcal encephalitis.

Alleviating binary toxicity of polystyrene nanoplastics and atrazine to Chlorella vulgaris through humic acid interaction: Long-term toxicity using environmentally relevant concentrations.

In this study, microalgae Chlorella vulgaris (C. vulgaris) were simultaneously exposed to environmental concentrations of amino-functionalized polystyrene nanoplastics (PS-NH2; 0.05, 0.1, 0.2, 0.3 and 0.4 mg/L) and the world's second most used pesticide, the herbicide atrazine (ATZ; 10 µg/L), in the absence and presence of humic acid (HA; 1 mg/L) for 21 days. Due to the low concentrations of PS-NH2, the majority of them could not cause a significant difference in the end-points of biomass, chlorophylls a and b, total antioxidant, total protein, and superoxide dismutase and malondialdehyde compared to the control group (p > 0.05). On the other hand, by adding ATZ to the PS-NH2, all the mentioned end-point values showed a considerable difference from the control (p < 0.05). The exposure of PS-NH2+ATZ treatments to the HA could remarkably reduce their toxicity, additionally, HA was able to decrease the changes in the expression of genes related to oxidative stress (e.g., superoxide dismutase, glutathione reductase, and catalase) in the C. vulgaris in the most toxic treatment group (e.g., PS-NH2+ATZ). The synergistic toxicity of the PS-NH2+ATZ group could be due to their enhanced bioavailability for algal cells. Nevertheless, the toxicity alleviation in the PS-NH2+ATZ treatment group after the addition of HA could be due to the eco-corona formation, and changes in their zeta potential from positive to negative value, which would increase their electrostatic repulsion with the C. vulgaris cells, in such a way that HA also caused a decrease in the formation of C. vulgaris-NPs hetero-aggregates. This research underscores the complex interplay between PS-NH2, ATZ, and HA in aquatic environments and their collective impact on microalgal communities.

Presence of humic acid in the environment holds promise as a potential mitigating factor for the joint toxicity of polystyrene nanoplastics and herbicide atrazine to Chlorella vulgaris: 96-H acute toxicity.

Increasing amounts of amino-functionalized polystyrene nanoplastics (PS-NH2) are entering aquatic ecosystems, raising concerns. Hence, this study investigated 96-h acute toxicity of PS-NH2 and its combination with the pesticide atrazine (ATZ) in the absence/presence of humic acid (HA) on the microalgae Chlorella vulgaris (C. vulgaris). Results showed that both PS-NH2 and PS-NH2+ATZ reduced algal growth, photosynthetic pigments, protein content, and antioxidant capacity, while increasing enzymatic activities. Gene expression related to oxidative stress was altered in C. vulgaris exposed to these treatments. Morphological and intracellular changes were also observed. The combined toxicity of PS-NH2+ATZ demonstrated a synergistic effect, but the addition of environmentally relevant concentration of HA significantly alleviated its toxicity to C. vulgaris, indicating an antagonistic effect due to the emergence of an eco-corona, and entrapment and sedimentation of PS-NH2+ATZ particles by HA. This study firstly highlights the role of HA in mitigating the toxicity of PS-NH2 when combined with other harmful compounds, enhancing our understanding of HA's presence in the environment.

Shear-thinning hyaluronan-based fluid hydrogels to modulate viscoelastic properties of osteoarthritis synovial fluids.

Hyaluronan (hyaluronic acid, HA) has been extensively explored as an attractive biomaterial for biomedical and pharmaceutical applications due to its unique physiological properties. In particular, HA is a major component of synovial fluid in normal knee joints and provides viscoelastic properties to synovial fluid. In osteoarthritic joints, synovial fluid loses its unique viscoelastic and lubrication properties. Intra-articular injection of HA in osteoarthritic knee joints is believed to restore viscoelasticity and lubrication abilities to synovial fluid. However, the main drawback of HA is its rapid degradation in synovial fluid. In order to overcome the problem of rapid clearance of HA, a HA-based hydrogel (vinyl sulfone-modified HA crosslinked by dithiol-terminated poly(ethylene glycol), HA-VS/SH-2-PEG) was synthesized in this study. Injectable fluid hydrogels (viscosupplements) possessing tunable viscoelasticity and controllable degradation rates were then prepared by adding HA-VS/SH-2-PEG microgels to HA solutions. The resultant viscosupplements exhibit enhanced viscoelastic properties, lubrication effects, efficient triamcinolone acetonide payload capacity, and high resistance to enzymatic degradation along with good biocompatibility and the capability to inhibit the progression of osteoarthritis in vivo. Overall, the results provide support for the use of injectable fluid hydrogels as a strategy for the treatment of osteoarthritis and potential for the clinical translation.

Interfacial engineered gadolinium oxide nanoparticles for magnetic resonance imaging guided microenvironment-mediated synergetic chemodynamic/photothermal therapy.

Engineering interfacial structure of biomaterials have drawn much attention due to it can improve the diagnostic accuracy and therapy efficacy of nanomedicine, even introducing new moiety to construct theranostic agents. Nanosized magnetic resonance imaging contrast agent holds great promise for the clinical diagnosis of disease, especially tumor and brain disease. Thus, engineering its interfacial structure can form new theranostic platform to achieve effective disease diagnosis and therapy. In this study, we engineered the interfacial structure of typical MRI contrast agent, Gd2O3, to form a new theranostic agent with improved relaxivity for MRI guided synergetic chemodynamic/photothermal therapy. The synthesized Mn doped gadolinium oxide nanoplate exhibit improved T1 contrast ability due to large amount of efficient paramagnetic metal ions and synergistic enhancement caused by the exposed Mn and Gd cluster. Besides, the introduced Mn element endow this nanomedicine with the Fenton-like ability to generate OH from excess H2O2 in tumor site to achieve chemodynamic therapy (CDT). Furthermore, polydopamine engineered surface allow this nanomedicine with effective photothermal conversion ability to rise local temperature and accelerate the intratumoral Fenton process to achieve synergetic CDT/photothermal therapy (PTT). This work provides new guidance for designing magnetic resonance imaging guided synergetic CDT/PTT to achieve tumor detection and therapy.

Targeted therapy of intracranial glioma model mice with curcumin nanoliposomes.

BACKGROUND: Glioma is the most aggressive and lethal brain tumor in humans, it comprises about 30 per cent of all brain tumors and central nervous system tumors. PURPOSE: The objective of this study was to create novel brain-targeting nanoliposomes to encapsulate curcumin as a promising option for glioma therapy. PATIENTS AND METHODS: Human glioma cells (U251MG) were used to determine cell uptake efficiency and possible internalization mechanism of the curcumin-loaded nanoliposomes modified by a brain-targeting peptide RDP. In addition, intracranial glioma mice model was prepared by transplantation of U251MG cells into the mice striatum, and then the liposomes were intravenously administered into the glioma-bearing mice to evaluate the anti-glioma activity. RESULTS: RDP-modified liposomes (RCL) could enter the brain and glioma region, and were internalized by the glioma cells perhaps through acetylcholine receptor-mediated endocytosis pathway. Furthermore, the RCL prolonged the survival time of the glioma-bearing mice from 23 to 33 days, and the inhibition mechanism of the RCL on glioma cell was partly due to cell cycle arrest at the S phase and induction of cell apoptosis. CONCLUSION: This study would provide a potential approach for targeted delivery of drug-loaded liposomes for glioma treatment.

[Product standard and quality control of sodium hyaluronate].

OBJECTIVE: To analyze and compare the domestic quality standard and foreign quality standard of sodium hyaluronate (HA), and to expatiate on the critical process monitoring parameters. METHODS: Different quality standards of HA were compared by translating and sorting, and some experimental data were analyzed as well as the manufacturing practice was elaborated. RESULTS: Differences exist in raw materials standard or specifications of products between domestic and foreign, but the basic control points are concordant. CONCLUSION: The company should set up reasonable and controllable quality standard based on quality requirements and related process characteristics so as to assure the safety and effectiveness of the clinical application.