In vitro drug release behavior from a novel thermosensitive composite hydrogel based on Pluronic f127 and poly(ethylene glycol)-poly(epsilon-caprolactone)-poly(ethylene glycol) copolymer.

BACKGROUND: Most conventional methods for delivering chemotherapeutic agents fail to achieve therapeutic concentrations of drugs, despite reaching toxic systemic levels. Novel controlled drug delivery systems are designed to deliver drugs at predetermined rates for predefined periods at the target organ and overcome the shortcomings of conventional drug formulations therefore could diminish the side effects and improve the life quality of the patients. Thus, a suitable controlled drug delivery system is extremely important for chemotherapy. RESULTS: A novel biodegradable thermosensitive composite hydrogel, based on poly(ethylene glycol)-poly(epsilon-caprolactone)-poly(ethylene glycol) (PEG-PCL-PEG, PECE) and Pluronic F127 copolymer, was successfully prepared in this work, which underwent thermosensitive sol-gel-sol transition. And it was flowing sol at ambient temperature but became non-flowing gel at body temperature. By varying the composition, sol-gel-sol transition and in vitro drug release behavior of the composite hydrogel could be adjusted. Cytotoxicity of the composite hydrogel was conducted by cell viability assay using human HEK293 cells. The 293 cell viability of composite hydrogel copolymers were yet higher than 71.4%, even when the input copolymers were 500 microg per well. Vitamin B12 (VB12), honokiol (HK), and bovine serum albumin (BSA) were used as model drugs to investigate the in vitro release behavior of hydrophilic small molecular drug, hydrophobic small molecular drug, and protein drug from the composite hydrogel respectively. All the above-mentioned drugs in this work could be released slowly from composite hydrogel in an extended period. Chemical composition of composite hydrogel, initial drug loading, and hydrogel concentration substantially affected the drug release behavior. The higher Pluronic F127 content, lower initial drug loading amount, or lower hydrogel concentration resulted in higher cumulative release rate. CONCLUSION: The results showed that composite hydrogel prepared in this paper were biocompatible with low cell cytotoxicity, and the drugs in this work could be released slowly from composite hydrogel in an extended period, which suggested that the composite hydrogel might have great potential applications in biomedical fields.

Preparation, characterization, in vitro and in vivo anti-tumor effect of thalidomide nanoparticles on lung cancer.

INTRODUCTION: Thalidomide (THA) is an angiogenesis inhibitor and an efficient inhibitor of the tumor necrosis factor-α (TNF-α). However, the clinical application of THA has been limited due to hydrophobicity of the compound. MATERIALS AND METHODS: To increase the water solubility of THA and in order to evaluate the anticancer abilities of this material on human lung carcinoma, methoxy poly(ethylene glycol)-poly(ε-caprolactone) nanoparticles loaded with THA (THA-NPs) were prepared. The synthesis of THA-NPs was carried out via a dialysis method with relative satisfactory encapsulation efficiency, loading capacity, size distribution, and zeta potential. RESULTS: A cytotoxicity assay demonstrated that THA-NPs inhibited the growth of cells in a dose-dependent manner. The evaluation of anti-tumor activity in vivo showed that THA-NPs could inhibit tumor growth and prolong the survival rate of tumor-bearing mice. Immunohistochemical analysis indicated that THA-NPs inhibited cell proliferation (Ki-67 positive rate, 32.8%±4.2%, P<0.01), and resulted in a decreased rate of the tumor tissue microvessel density (3.87%±0.77%, P<0.01), VEGF (26.67%±4.02%, P<0.01), and TNF-α (75.21±6.85 ng/mL, P<0.01). CONCLUSION: In general, the drug delivery system reported herein may shed light on future targeted therapy in lung cancer treatment.

Use of 5-Fluorouracil Loaded Micelles and Cisplatin in Thermosensitive Chitosan Hydrogel as an Efficient Therapy against Colorectal Peritoneal Carcinomatosis.

Colorectal peritoneal carcinomatosis (CRPC) is a common systemic metastasis of intra-abdominal cancers. Intraperitoneal chemotherapy against CRPC is at present the preferred treatment. The aim of this study is to develop a novel hydrogel drug delivery system through the combination of 5-fluorouracil (5-FU) loaded polymeric micelles and cisplatin (DDP) in biodegradable thermosensitive chitosan (CS) hydrogel. The prepared CS hydrogel drug is a free-flowing solution at room temperature and forms a stationary gel at body temperature. Therefore, a CRPC mouse model is established to investigate the antitumor activity of CS hydrogel drug system. The results suggest that intraperitoneal administration of CS hydrogel drug can inhibit tumor growth and metastasis, and prolong survival time compared with other groups, thus improving the chemotherapeutic effect. Ki-67 immunohistochemical analysis reveals that tumors in the CS hydrogel drug group has lower cell proliferation in contrast to other groups (P < 0.001). Furthermore, hematoxylin-eosin staining of liver and lung tissue indicates that the CS hydrogel drug has also a certain inhibitory effect on colorectal cancer metastasis to the liver and lung. Hence, the work highlights the potential clinical applications of the CS hydrogel drug.

Biodegradable and thermosensitive monomethoxy poly(ethylene glycol)-poly(lactic acid) hydrogel as a barrier for prevention of post-operative abdominal adhesion.

Post-operative peritoneal adhesions are serious consequences of abdominal or pelvic surgery and cause severe bowel obstruction, chronic pelvic pain and infertility. In this study, a novel nano-hydrogel system based on a monomethoxy poly(ethylene glycol)-poly(lactic acid) (MPEG-PLA) di-block copolymer was studied for its ability to prevent abdominal adhesion in rats. The MPEG-PLA hydrogel at a concentration of 40% (w/v) was injected and was able to adhere to defect sites at body temperature. The ability of the hydrogel to inhibit adhesion of post-operative tissues was evaluated by utilizing a rat model of abdominal sidewall-cecum abrasion. It was possible to heal wounded tissue through regeneration of neo-peritoneal tissues ten days after surgery. Our data showed that this hydrogel system is equally as effective as current commercialized anti-adhesive products.

In vitro and in vivo degradation behavior of n-HA/PCL-Pluronic-PCL polyurethane composites.

Scaffolds for bone tissue engineering applications should have suitable degradability in favor of new bone ingrowth after implantation into bone defects. In this study, degradation behavior of polyurethane composites composed of triblock copolymer poly(caprolactone)-poluronic-poly(caprolactone) (PCL-Pluronic-PCL, PCFC) and nanohydroxyapatite (n-HA) was investigated. The water contact angle and water absorption were measured to reveal the effect of n-HA content on the surface wettability and swelling behavior of the n-HA/PCFC composites, respectively. The weight loss in three degradation media with pH value of 4.0, 7.4, and 9.18 was also studied accordingly. Fourier transform infrared analysis, differential scanning calorimeter, X-ray diffraction, thermal-gravimetric analysis, and scanning electron microscopy were used to investigate the change of chemical structure and micromorphology after the n-HA/PCFC composite with 30% HA was degraded for different time intervals. Meanwhile, in vivo degradation was conducted by subcutaneous implantation. The weight loss and morphology change during observation periods were also studied.

Acceleration of dermal wound healing by using electrospun curcumin-loaded poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) fibrous mats.

This study prepared a composite scaffold composed of curcumin and poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCL-PEG-PCL, PCEC) copolymer using coelectrospinning technology. Incorporation of curcumin into the polymeric matrix had an obvious effect on the morphology and dimension of PCEC/curcumin fibers. The results of in vitro anti-oxidant tests and of the cytotoxicity assay demonstrated that the curcumin-loaded PCEC fibrous mats had significant anti-oxidant efficacy and low cytotoxicity. Curcumin could be sustainably released from the fibrous scaffolds. More importantly, in vivo efficacy in enhancing wound repair was also investigated based on a full-thickness dermal defect model for Wistar rats. The results indicated that the PCEC/curcumin fibrous mats had a significant advantage in promoting wound healing. At 21 days post-operation, the dermal defect was basically recovered to its normal condition. A percentage of wound closure reached up to 93.3 ± 5.6% compared with 76.9 ± 4.9% of the untreated control (p < 0.05). Therefore, the as-prepared PCEC/curcumin composite mats are a promising candidate for use as wound dressing.

Electrospun polylactide/poly(ethylene glycol) hybrid fibrous scaffolds for tissue engineering.

The biodegradable polylactide/poly(ethylene glycol) (PLA/PEG) hybrid membranes were fabricated via electrospinning of PLA/PEG solution. Their structures and properties were investigated by scanning electron microscopy, differential scanning calorimetry, and water contact angle. In vitro hydrolytic degradation showed that PEG content influenced the degradation rate of the PLA/PEG hybrid mats. The mechanical property was measured by tensile test and the result revealed that the addition of PEG had an obvious plasticization on PLA matrix. In-vitro biocompatibility was investigated by culturing cell on the scaffolds and MTT assay. The results indicated that the cell could attach and proliferate on the membranes, so confirmed that the PLA/PEG hybrid membrane had good biocompatibility, and it could be a promising biomaterial for tissue engineering applications.

Synthesis and characterization of injectable, thermosensitive, and biocompatible acellular bone matrix/poly(ethylene glycol)-poly (ε-caprolactone)-poly(ethylene glycol) hydrogel composite.

In orthopedic tissue engineering, the extensively applied acellular bone matrix (ABM) can seldom be prefabricated just right to mold the cavity of the diverse defects, might induce severe inflammation on account of the migration of small granules and usually bring the patients great pain in the treatment. In this study, a new injectable thermosensitive ABM/PECE composite with good biocompatibility was designed and prepared by adding the ABM granules into the triblock copolymer poly(ethylene eglycol)-poly(ε-caprolactone)-poly(ethylene eglycol) (PEG-PCL-PEG, PECE). The PECE was synthesized by ring-opening copolymerization and characterized by ¹H NMR. The ABM was prepared by acellular treatment of natural bone and ground to fine granules. The obtained ABM/PECE composite showed the most important absorption bands of ABM and PECE copolymer in FT-IR spectroscopy and underwent sol-gel phage transition from solution to nonflowing hydrogel at 37°C. SEM results indicated that the ABM/PECE composite with different ABM contents all presented similar porous 3D structure. ABM/PECE composite presented mild cytotoxicity to rat MSCs in vitro and good biocompatibility in the BALB/c mice subcutis up to 4 weeks. In conclusion, all the results confirmed that the injectable thermosensitive ABM/PECE composite was a promising candidate for orthopedic tissue engineering in a minimally-invasive way.

Preparation and properties of nano-hydroxyapatite/PCL-PEG-PCL composite membranes for tissue engineering applications.

Nano-hydroxyapatite (n-HA)/poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCL-PEG-PCL, PCEC) composite membranes were prepared by solvent casting and evaporation method. The structure and properties of the membranes were investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), water contact angle measurements, in vitro hydrolytic degradation, mechanical test, and cell culture. The effect of n-HA content on physical-chemical properties of the n-HA/PCEC composite membranes was studied. The results showed that the shape and size of micropores of the composite membranes changed with n-HA content increased; the tensile strength decreased with the increase of n-HA content. The osteoblast cell was cultured on the membranes, good cell attachment and growth manner were observed after postseeding for 1 day. MTT assays showed that the n-HA/PCEC membranes had no negative effect on the cell viability and proliferation. These results suggested that the obtained n-HA/PCEC composite membranes in this study might have prospective applications in tissue engineering field.

Preparation and characterization of a porous scaffold based on poly(D,L-lactide) and N-hydroxyapatite by phase separation.

In this study, a series of porous scaffolds were prepared from poly(D,L-lactide) (PLA) and nanohydroxyapatite (HA) using the phase separation method. HA/PLA composite membranes and PLA membranes with a microporous structure (pore size around 10-20 µm) were observed by scanning electron microscopy and these micropores were well distributed throughout the PLA membranes. The surface morphology of HA/PLA composite membranes was significantly improved compared to pure PLA membrane. Also, the mechanical property and contact angle of composite membranes were different from that of pure PLA films. The immortalized rat osteoblastic ROS 17/2.8 cell line was used in this research to study the cell adhesion and proliferation behavior, and the results indicated that composite membranes had great cell affinity and good biocompatibility.

Thermosensitive PEG-PCL-PEG hydrogel controlled drug delivery system: sol-gel-sol transition and in vitro drug release study.

In this article, biodegradable and low molecular weight poly(ethylene glycol)-poly(epsilon-caprolactone)-poly(ethylene glycol) (PEG-PCL-PEG, PECE) triblock copolymers were successfully synthesized. Aqueous solution of the obtained PECE copolymers underwent sol-gel-sol transition as temperature increased which was flowing sol at room temperature and then turned into nonflowing gel at body temperature. Sol-gel-sol phase transition behaviors of aqueous PECE solutions were studied using rheometry and test tube-inverting method, which were affected by many factors, including the heating/cooling procedure and different additives in copolymers aqueous solution. In vitro drug release behavior was studied using bovine serum albumin (BSA) and Vitamin B(12) (VB(12)) as model drugs, and the PECE hydrogel could protect BSA from acidic degradation for 1 week at least. Therefore, PECE hydrogel is believed to be promising for injectable in situ gel-forming controlled drug delivery system due to their great thermosensitivity and biodegradability.

Acute toxicity evaluation of in situ gel-forming controlled drug delivery system based on biodegradable poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) copolymer.

In this paper, biodegradable poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) (PCL-PEG-PCL) triblock copolymer was synthesized, and was characterized by FTIR, 1H-NMR and GPC. The PCL-PEG-PCL/dimethyl sulfoxide (DMSO) solution displayed in situ gelling behavior when subcutaneously injected into the body. Toxicity tests and a histopathological study were performed in BALB/c mice. We focused mainly on acute organ toxicity of BALB/c mice by subcutaneous injection. In the acute toxicity test, the dose of subcutaneous injection was 5 g/kg body weight (b.w.), and the mice were observed continuously for 14 days. For the histopathological study, samples including heart, lung, liver, kidneys, spleen, stomach and intestine were histochemically prepared and stained with hematoxylin-eosin for histopathological examination. No mortality or significant signs of toxicity were observed during the whole observation period, and there is no significant lesion to be shown in histopathological study of major organs in the mice. Therefore, the maximal tolerance dose of dimethyl sulfoxide (DMSO) solution of PCL-PEG-PCL copolymer by subcutaneous injection was calculated to be higher than 5 g/kg b.w. Therefore, the PCL-PEG-PCL/DMSO system was thought to be non-toxic after subcutaneous injection, and it might be a candidate for an in situ gelling controlled drug delivery system.

Acute toxicity evaluation of biodegradable in situ gel-forming controlled drug delivery system based on thermosensitive PEG-PCL-PEG hydrogel.

In this work, a biodegradable poly(ethylene glycol)-poly(epsilon-caprolactone)-poly (ethylene glycol) (PEG-PCL-PEG, PECE) triblock copolymer was successfully synthesized. The aqueous solution of such PECE copolymer displayed special sol-gel-sol transition as temperature increase, which is a flowing sol at low-temperature and turns into a nonflowing gel at body temperature. The cytotoxicity of PECE copolymer was evaluated by cell viability assay using HEK 293 cells. In vivo gel formation and degradation test based on intraperitoneal and subcutaneous administration was conducted, respectively. The acute toxicity test and histopathological study were performed in BALB/c mice by intrapleural, intraperitoneal, or subcutaneous administration of PECE hydrogel (30 Wt %), respectively. The dose of intrapleural, intraperitoneal, or subcutaneous administration was up to 10 g/kg body weight (b.w.), 25 g/kg b.w., and 25 g/kg b.w., respectively, and the mice were observed continuously for 14 days. For histopathologic study, samples including heart, liver, lung, kidneys, spleen, stomach, intestine, and tissue of injection site were prepared for histochemical analysis and were stained with hematoxylin-eosin. No mortality or significant signs of acute toxicity was observed during the whole observation period and there is no significant lesion to be shown in histopathologic study of major organs. Therefore, the maximum tolerance dose of PECE hydrogel by intrapleural, intraperitoneal, or subcutaneous administration was calculated to be higher than 10 g/kg b.w., 25 g/kg b.w., and 25 g/kg b.w., respectively. The results indicated that the prepared PECE hydrogel was nontoxic after intrapleural, intraperitoneal, or subcutaneous administration, and it could be a safe candidate for in situ gel-forming controlled drug delivery system.