In vitro analysis of monomer leaching in modern dental materials: CAD milled, printed, traditional heat-processed, and auto-polymerizing denture base resins.

PURPOSE: Denture fabrication has shifted from traditional heat-processed and auto-polymerizing materials to computer-aided design and computer-aided manufacturing (CAD-CAM) milled and printed materials. The monomer in traditional materials can induce an allergic reaction in some patients. With the rise in the edentulous population and increasing demand for the fabrication of dentures, these newer materials should be studied for monomer leaching. The purpose of this study was to evaluate the ratio of residual monomer in materials being used for denture bases: CAD-milled polymethylmethacrylate (PMMA), printed denture base resin, heat-processed PMMA, and auto-polymerizing PMMA comparatively. MATERIALS AND METHODS: Milled, printed, heat-activated, and auto-polymerizing denture base specimens (n = 3 for each group, each test run three times) were fabricated according to manufacturer recommendations. Specimens were first immersed in deuterated chloroform (CDCl3), a deuterated organic solvent, to evaluate monomer leaching and to observe physical properties of the materials. NMR spectroscopy was used to evaluate the dissolution of materials and residual monomer to crosslinked polymer ratios at 1, 4, and 9 days. A second group of specimens was then immersed in deuterium oxide (D2O) to evaluate if the residual monomers would leach out of the system. The solution was then analyzed using nuclear magnetic resonance (NMR) spectroscopy for 1 month. The deuterated forms of chloroform (CDCl3) and water (D2O) were used to enable sample characterization by NMR. RESULTS: While the heat-processed, auto-polymerizing, and milled specimens possessed residual monomers, no significant monomer leaching was noted in the printed specimen, while immersed in CDCl3. Similarly, the printed specimen was most resistant to dissolution, as compared to the rest; dissolution of the specimen is indicative of little to no cross-linking. No detectable dissolution of monomer was seen when all specimens were immersed in D2O for up to 1 month. CONCLUSIONS: Residual monomers were not found in the printed denture material in this study in either CDCl3 or D2O, whereas CAD-milled and traditionally processed denture bases still have residual monomers within their respective systems when immersed in organic solvent. None of the specimens tested leached monomers into D2O.

Trophic transfer of cyclic methyl siloxanes in the marine food web in the Bohai Sea, China.

Trophic transfer of cyclic methyl siloxanes (CMS) in aquatic ecosystems is an important criterion for assessing its environmental risks. This study researched the trophic transfer of four CMS (octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), dodecamethylcyclohexasiloxane (D6), and tetradecamethylcycloheptasiloxane (D7)) in marine food web from zooplankton up to seabirds in the Chinese Bohai Sea. In the zooplankton-invertebrate-fish-seabird based food web, the significant trophic magnifications were found for D4 to D6 (D4: R2 = 0.040, p < 0.05, D5: R2 = 0.26, p < 0.0001, D6: R2 = 0.071, p < 0.001), and the significant trophic dilution was found for D7 (R2 = 0.026 and p < 0.05). The trophic magnification factors (TMF) for D4 to D7 were 1.7 (95% confidence interval: 1.1-2.6), 3.5 (2.5-5.0), 1.8 (1.3-2.6), and 0.63 (95% CI: 0.40-0.99) respectively. In the zooplankton-invertebrate-fish based food web, both significant trophic magnification for D5 (R2 = 0.16, p < 0.0001, TMF = 3.0) and significant trophic dilution for D7 (R2 = 0.073, p < 0.01, TMF = 0.4) were found, but for D4 and D6, the trophic magnifications were not significant (D4: R2 = 0.010, p = 0.23, D6: R2 = 0.010, p = 0.23). The trophic transfer of the legacy contaminant BDE-47 and BDE-99 were also conducted as the benchmark chemicals and significant positive correlation was found. As far as we know, this is the first research on the trophic transfer of CMS in the zooplankton-invertebrate-fish-bird food chain which provided new insight of these compounds in the area.

Whole-Genome Linkage Analysis with Whole-Exome Sequencing Identifies a Novel Frameshift Variant in NEFH in a Chinese Family with Charcot-Marie-Tooth 2: A Novel Variant in NEFH for Charcot-Marie-Tooth 2.

BACKGROUND: Charcot-Marie-Tooth disease (CMT) is the most common neurodegenerative disorder of the peripheral nervous system. More than 50 genes/loci were found associated with the disease. We found a family with autosomal-dominant CMT2. OBJECTIVE: To reveal the pathogenic gene of the family and further investigate the function of the variant. METHODS: DNA underwent whole-genome linkage analysis for all family members and whole-exome sequencing for 2 affected members. Neurofilament light polypeptide and wild-type or mutant neurofilament heavy polypeptide (NEFH) were co-transfected into SW13 (vim-) cells. The nefh-knockdown zebrafish model was produced by using morpholino antisense oligonucleotides. RESULTS: We identified a novel insertion variant (c.3057insG) in NEFH in the family. The variant led to the loss of a stop codon and an extended 41 amino acids in the protein. Immunofluorescence results revealed that mutant NEFH disrupted the neurofilament network and induced aggregation of NEFH protein. Knockdown of nefh in zebrafish caused a slightly or severely curled tail. The motor ability of nefh-knockdown embryos was impaired or even absent, and the embryos showed developmental defects of axons in motor neurons. The abnormal phenotype and axonal developmental defects could be rescued by injection of human wild-type but not human mutant NEFH mRNA. CONCLUSIONS: We identified a novel stop loss variant in NEFH that is likely pathogenic for CMT2, and the results provide further evidence for the role of an aberrant assembly of neurofilament in CMT.

Alteration of occlusal vertical dimension induces signs of neuroplastic changes in corticomotor control of masseter muscles: Preliminary findings.

PURPOSE: To investigate the effect of altering occlusal vertical dimension (OVD) in patients with severe attrition on corticomotor control of the masseter muscles as assessed by navigated transcranial magnetic stimulation (nTMS). METHODS: Seven patients (58.6 ± 8.4 years) with decreased OVD due to severe attrition were given mandibular occlusal splints to alter the OVD with the instruction to wear during the whole awake time for a period of four weeks. Motor-evoked potentials (MEPs) and the motor cortex maps of the masseter muscles and first dorsal interosseous (FDI) muscles as control were recorded by nTMS at baseline and at least 4 weeks after the alteration of OVD. The stimulus-response curves of MEPs were analysed with two-way repeated-measures ANOVA, and the numerical rating scale scores, motor thresholds, onset latencies, motor cortex maps and centre of gravity (COG) were analysed with paired t tests. RESULTS: There was a significant increase in the amplitude of the masseter muscle MEPs (P = 0.036), but no change in the motor cortex map areas (P = 0.111) four weeks after the alteration of OVD. Furthermore, there was no significant difference in either the amplitude of the FDI muscle MEPs (P = 0.466) or the motor cortex map areas (P = 0.230) before and after OVD alteration. CONCLUSION: The results suggest that alteration of OVD in patients with severe attrition was associated with signs of neuroplastic changes in the corticomotor control of the masseter muscles. The results of the study may add to our understanding of the putative mechanisms related to cortical changes in response to OVD alterations.

Effect of Tendon Stem Cells in Chitosan/ß-Glycerophosphate/Collagen Hydrogel on Achilles Tendon Healing in a Rat Model.

BACKGROUND The aim of this study was to determine whether the local application of tendon stem cells (TSCs) with chitosan/ß-glycerophosphate/collagen(C/GP/Co) hydrogel promotes healing after an acute Achilles tendon injury in a rat model. MATERIAL AND METHODS Ninety-six Sprague-Dawley (SD) rats were used to make an Achilles tendon defect model, then the animals were randomly divided into 4 groups consisting of 8 rats each: control group, hydrogel group, TSCs group, and TSCs with hydrogel group. At 2, 4, and 6 weeks after treatment, tendon samples were harvested, and the quality of tendon repair was evaluated based on histology, immunohistochemistry, and biomechanical properties. RESULTS Combining TSCs with C/GP/Co hydrogel significantly enhances tendon healing compared with the control, hydrogel, and TSCs groups. The improved healing was indicated by the improvement in histological and immunohistochemistry outcomes and the increase in the biomechanical properties of the regenerated tissue at both 4 and 6 weeks post-injury. CONCLUSIONS This study demonstrates that the transplantation of TSCs combined with C/GP/Co hydrogel significantly improved the histological, immunohistochemistry, and biomechanical outcomes of the regenerated tissue at 4 and 6 weeks after implantation. TSCs with C/GP/Co hydrogel is a potentially effective treatment for tendon injury.

Biological aging mediates the association between periodontitis and cardiovascular disease: results from a national population study and Mendelian randomization analysis.

BACKGROUND: The relationship between periodontitis and cardiovascular disease (CVD) has been extensively studied, but the role of biological aging in this relationship remains poorly understood. This study is dedicated to investigating the effect of periodontitis on the incidence of CVD and to elucidating the potential mediating role of biological aging. Furthermore, this study will seek to elucidate the causal association between periodontitis, CVD, and biological aging. METHODS: We included 3269 participants from the National Health and Nutrition Examination Survey (2009-2014) with diagnostic information on periodontitis and composite CVD events. Biological aging was evaluated by utilizing both the Klemera-Doubal method's calculated biological age (KDMAge) and phenotypic age (PhenoAge). Logistic regression, restricted cubic spline (RCS) analysis, and subgroup analysis were used for data analysis. Mediation analysis was employed to explore the mediating role of biological aging. Subsequently, Mendelian randomization (MR) analyses were performed using genome-wide association study databases to explore potential causal relationships between periodontitis, CVD, and biological aging. RESULTS: Periodontitis was associated with a higher risk of CVD. Participants with periodontitis were found to have increased levels of biological aging, and elevated levels of biological aging were associated with increased CVD risk. Mediation analyses showed a partial mediating effect of biological aging (PhenoAge: 44.6%; KDMAge: 22.9%) between periodontitis and CVD risk. MR analysis showed that periodontitis played a causal role in increasing the risk of small vessel stroke, while myocardial infarction was found to increase the risk of periodontitis. In addition, reverse MR analysis showed that phenotypic aging can increase the risk of periodontitis, and there is a two-way causal relationship between CVD and biological aging. CONCLUSIONS: Periodontitis is associated with an increased CVD risk, partially mediated by biological aging, with a complex causal interrelationship. Targeted interventions for periodontal health may slow the biological aging processes and reduce CVD risk.

Comb Polyelectrolytes Stabilize Complex Coacervate Microdroplet Dispersions.

Complex coacervate microdroplets are membraneless compartments that selectively sequester biological molecules from their surroundings and enhance bioreactions. Yet, their use as protocell models and bioreactors has been limited owing to a lack of feasible strategies to prevent their uncontrolled coalescence. Herein, we introduce an approach to mitigate coalescence of complex coacervate microdroplets using comb polyelectrolytes as stabilizers, creating complex coacervate dispersions with months-long stabilities. Tunability of microdroplet size and stability is achieved by the regulation of comb polyelectrolyte concentration and molecular weight. Importantly, the comb polyelectrolyte-stabilized coacervate microdroplets spontaneously sequester and retain proteins over extended periods. Moreover, enhanced catalytic activity of proteins and significant (up to 10-fold) acceleration of bioreactions are achieved in stabilized complex coacervate dispersions, even when stored for up to 48 h. Our findings are expected to expand the utility of complex coacervate microdroplets as artificial protocells, encapsulants, and bioreactors and also facilitate their use in pharmaceutical, agricultural, food, and cosmetics formulations.

Biodegradation of Dental Resin-Based Composite-A Potential Factor Affecting the Bonding Effect: A Narrative Review.

In recent years, although resin composite has played an important role in the restoration of tooth defects, it still has several disadvantages, including being biodegraded by saliva, bacteria and other enzymes in the oral cavity, which may result in repair failure. This factor is not conducive to the long-term survival of the prosthesis in the mouth. In this article, we review the causes, influencing factors and prevention methods of resin biodegradation. Biodegradation is mainly caused by esterase in saliva and bacteria, which breaks the ester bond in resin and causes the release of monomers. The mechanical properties of the prosthesis can then be affected. Meanwhile, cathepsin and MMPs are activated on the bonding surface, which may decompose the dentin collagen. In addition, neutrophils and residual water on the bonding surface can also aggravate biodegradation. Currently, the primary methods to prevent biodegradation involve adding antibacterial agents to resin, inhibiting the activity of MMPs and enhancing the crosslinking of collagen fibers. All of the above indicates that in the preparation and adhesion of resin materials, attention should be paid to the influence of biodegradation to improve the prosthesis's service life in the complex environment of the oral cavity.

Effect of hydroxyl and carboxyl-functionalized carbon nanotubes on phase morphology, mechanical and dielectric properties of poly(lactide)/poly(butylene adipate-co-terephthalate) composites.

A series of poly(lactide)/poly(butylene adipate-co-terephthalate) (PLA/PBAT) composites containing different types of multi-walled carbon nanotubes (CNTs) such as hydroxyl and carboxyl-functionalized CNTs were fabricated using the melt blending method. The multifunctional epoxy oligomer (ADR) was selected as a chain extender in order to enhance the compatibility between PBAT and PLA. It was revealed that the addition of ADR could induce CNTs-OH to locate at the PLA/PBAT interface. But the inhibition effect of CNTs-COOH on chain extension reaction in PLA/PBAT blend system led to a decrease in the interaction force between PLA and PBAT owing to the high efficiency of the reaction between CNTs-COOH and ADR. The ε' of PLA/PBAT/4CNTs-OH composite was greater than that of PLA/PBAT/4CNTs-COOH composite because of the strong interaction between fillers and polymer matrix in PLA/PBAT/4CNTs-OH composite. The PLA/PBAT/4CNTs-OH composite showed a high ε' (24.9) and a low tan δ (0.23), respectively. The adjacent CNTs-OH could act as assemble microcapacitors electrodes and the polymer acted as a dielectric to, which greatly increased the interfacial polarization. The PLA/PBAT/4CNTs-OH composite has excellent mechanical and dielectric properties.

Finite Element Analysis and Comparative Study of 4 Kinds of Internal Fixation Systems for Anterior Cervical Discectomy and Fusion in Children.

Background: Spinal injury in children usually occurs in the cervical spine region. Anterior fixation of the lower cervical spine has been applied in treating pediatric cervical spine injury and disease due to its stable and firm mechanical properties. This study performed finite element analysis and comparison of four different anterior cervical internal fixation systems for children to explore more standard methods of anterior cervical internal fixation in children and seek more effective and safe treatment for children's cervical spine diseases. Methods: A finite element model of 6-year-old children with lower cervical spine C4/5 discectomy was established, and the self-designed lower cervical spine anterior locking internal fixation system ACBLP and the children's anterior cervical internal fixation system ACOP, ACVLP, and ACSLP plate screws were fixed and loaded on the model. 27.42 N·m torque load was applied to each internal fixation model under six working conditions of anteflexion, backward flexion, left flexion, right flexion, left rotation, and right rotation, to simulate the movement of the cervical spine. The activity and stress distribution cloud diagram of each finite element model was obtained to explore the optimal method of anterior cervical fixation in children. Results: In the four internal fixation models of ACOP, ACVLP, ACSLP, and ACBLP, the mobility of the C4/5 segment showed a decreasing relationship, and the mobility of adjacent segments increased significantly. In the Mises stress cloud diagram of the cervical spine of the four models, the vertebral body and accessories of the ACBLP model born the least stress, followed by ACSLP. The steel plate and screws in the ACVLP internal fixation model were the most stressed. The stress of the internal fixation system (plate/screw) in all models increased in the order of ACBLP, ACSLP, ACVLP, and ACOP. Conclusions: ACBLP internal fixation system had obvious advantages in anterior internal fixation of the lower cervical spine in children, C4/5 had the smallest degree of movement, relative displacement was minimal, and the stress on the centrum and pedicle was the least, while the stress on the plate screw was relatively the smallest.

Responses of human gingival fibroblasts to superhydrophilic hydrogenated titanium dioxide nanotubes.

Soft tissue integration is critical for the long-term retention of dental implants. The surface properties including topography and wettability can impact soft tissue sealing. In our work, a thermal hydrogenation technique was applied to modify anodized titanium dioxide nanotubes (TNTs). However, the effects of the hydrogenated surface on soft-tissue cells remain unclear. The aim of the present study was to investigate the bioactivities of human gingival fibroblasts (HGFs) on structured surfaces, which determine the early formation of soft tissue sealing. Three groups were examined: commercially pure titanium (Ti), anodized TNTs (air-TNTs) and hydrogenated TNTs (H2-TNTs). Scanning electron microscopy showed the nanotubular topography on the titanium surfaces after anodization. Then, hydrogenation ensured that the H2-TNTs were superhydrophilic with a contact angle of 3.5 ± 0.8°. In vitro studies such as cell adhesion assays, cell morphology, immunocytochemistry, wound healing assays, real-time PCR and enzyme-linked immunosorbent assays displayed enhanced adhesion, migration, relative gene expression levels, and extracellular matrix synthesis of the HGFs on H2-TNTs. Interestingly, focal adhesion kinase activation and integrin-mediated adhesion seemed to be induced by the H2-TNT surface. Our results revealed that a superhydrophilic nanostructure modified by anodization and hydrogenation can improve the bioactivity of HGFs and connective tissue regeneration, which will further promote and expand the application of titanium dioxide nanotubes in dental implants.

A Systematic Meta-Analysis of the Effect of Interprofessional Education on Health Professions Students' Attitudes.

Interprofessional education (IPE) is based on collaborative practices that increase the occasions for communication among those in various health professions. However, there is a paucity of literature about the effectiveness of IPE programs in health professions education. The aim of this systematic review and meta-analysis was to objectively assess the literature on the effectiveness of IPE in improving health professions students' attitudes after training. The major scholarly databases were searched for relevant IPE studies involving predoctoral health professions students. Two independent researchers selected the studies, extracted the data, and assessed the quality of the studies. Meta-analyses of the outcomes were performed using random effects models. Sixteen articles were ultimately selected for detailed review and meta-analysis. The meta-analysis showed that IPE training had a significant influence on students' understanding of collaboration and resulted in better attitudes about interprofessional teamwork. Subscale analysis showed that one subscale score (roles and responsibilities) did not statistically significantly improve after IPE training (p=0.06), whereas the other four subscale items showed statistically significant improvements (p<0.01). The test for overall effects showed that IPE training had a significantly positive influence on students' attitudes about IPE (Z=6.85, p<0.01). Subgroup results showed that medical students had more positive attitudes about IPE than did dental students. Regardless of profession, women students responded with significantly more positive feedback than did men students (p=0.02). These results suggest that intervention through IPE training has had positive effects in health professions education. Gender was an important factor impacting the outcomes of IPE. However, further clinical practice interventions may be helpful to enhance the IPE competence of health professions students.

Implications of soluble E-cadherin level of antiviral treatment in patients with chronic hepatitis C virus infection.

BACKGROUND AND AIMS: Soluble E-cadherin (sE-cadherin) has been observed elevated in patients with various diseases, and implicated in the occurrence and development of those diseases. The implications of sE-cadherin in chronic hepatitis C virus (HCV) infection are still unclear. The purpose of this study is to explore the significance of sE-cadherin in chronic hepatitis C infection and the correlation with treatment response. METHODS: 87 chronic HCV infected patients and 60 healthy subjects were enrolled in this study. Blood samples from patients receiving the combined treatment of pegylated interferon-a (Peg-IFN-α) with ribavirin (RBV) were collected before treatment, during 4th, 12th therapy weeks, end of the treatment, and 24 weeks post-therapy. Plasma sE-cadherin level was detected by enzyme-linked immunosorbent assay (ELISA) and the relationship between sE-cadherin and antiviral treatment outcome was analyzed. RESULTS: Plasma sE-cadherin concentrations of Chronic HCV infected patients were significantly higher than that of healthy controls. A strong correlation between sE-cadherin level and the HCV viral load, alanine aminotransferase (ALT), aspartate aminotransferase (AST), and also glutamyl transpeptidase (GGT) level was detected. Chronic HCV infected patients achieving rapid virological response (RVR) and sustained virological response (SVR) had lower baseline sE-cadherin concentrations compared with the non-RVR and non-SVR groups respectively. Univariate and multivariate regression analyses suggested that baseline plasma sE-cadherin level was predictive of therapeutic effect in patients with chronic HCV infection. CONCLUSION: Baseline sE-cadherin level could be considered as an independent predictor of SVR with Peg-IFN-α plus ribavirin therapy in the Chinese Han population chronic HCV infection patients. Effective antiviral therapy might restore sE-cadherin at physiological levels.

Lithium chloride attenuates root resorption during orthodontic tooth movement in rats.

Root resorption is a common side effect of orthodontic treatment. In the current study, lithium chloride (LiCl), a Wnt signaling activator, was examined to determine its effect on root resorption. In total, 10 Sprague Dawley rats were randomly allocated into the experimental group (EG) and control group (CG). Each group consisted of five subjects. By using closed nickel-titanium coil springs, a 50-g force was applied between the upper incisors and the maxillary right first molars in order to mimic orthodontic biomechanics in the EG and CG for 14 days. During the 14 days, the EG rats were gavage-fed 200 mg/kg LiCl every 48 h. Next, digital radiographs were captured using a micro-computational tomography scanner. The movement of the maxillary first molars and the root resorption area ratio were measured electronically on the digital radiographs. The outcomes were analyzed using ANOVA. Following 14 days of experimental force application, all rats had spaces of varying sizes between the first and second right maxillary molars. The average distance measured in the CG was slightly higher than in the EG, however, the difference was not found to be statistically significant (P=0.224). Root resorption craters were observed in the groups following the experiment. Rough cementum areas were observed on the mesial surface of the distobuccal and distopalatal roots. The mean root resorption area ratio of CG was significantly greater than EG (P<0.05). Results of the present study indicate that LiCl can attenuate orthodontically induce root resorption during orthodontic tooth movement. The effect of LiCl on tooth movement is insignificant.

Verification of posterior superior alveolar artery distribution in lateral wall of maxillary sinus by location and defect pattern.

OBJECTIVE: Maxillary sinus augmentation is used when performing implant treatment in the maxillary molar region with inadequate bone height. Posterior superior alveolar artery (PSAA) is the branch of the maxillary artery that supplies the lateral sinus wall and sinus membrane. When performing an osteotomy via lateral approach, however, damage to the PSAA can occur, because it runs inside the lateral wall of the maxillary sinus, causing hemorrhage and hampering surgery. The objective of the present study was to compare the defect patterns with the distances from the alveolar crest and sinus floor to the PSAA. METHOD AND MATERIALS: 280 lateral regions in 235 patients with at least three missing consecutive posterior teeth were measured. Measurement locations were the 1st premolar (P1), the 2nd premolar (P2), the 1st molar (M1), and the 2nd molar (M2). RESULTS: The detection rate was 29% to 59%, and the longest diameter was between 1.1 mm and 1.3 mm. The average distances between the PSAA and the alveolar crest were 24.1 mm, 21.3 mm, 15.4 mm, and 15.3 mm (P1-M2), with statistically significant differences in all locations except M1 and M2. The average distances between the PSAA and the maxillary sinus floor were 10.4 mm, 10.4 mm, 9.0 mm, and 8.5 mm (P1-M2), with no significant differences. There were no significant differences between different defect patterns in the distance between the PSAA and either the alveolar crest or the maxillary sinus floor. PSAA detection rate and the longest diameter were related to the spatial resolution of the computed tomography (CT) scan. CONCLUSION: Although the distance between the PSAA and the alveolar crest was significantly shorter in the molar region than in the premolar region, it did not affect the defect pattern.

[Finite element analysis of the stress distribution of two-piece post crown with different adhesives ].

OBJECTIVE: To establish three-dimensional finite element model of two-piece post crown to the mandibular first molar residual roots, and analyze the stress distribution characteristic to the residual roots with different adhesives, so as to get the best combination under different conditions. METHODS: The complete mandibular first molar in vitro was selected, the crown was removed along the cemento-enamel junction, then the residual roots were scanned by CT. CT images were imported into a reverse engineering software, and the three-dimensional finite element model of the mandibular first molar residual roots was reconstructed. Titanium two-piece post crown of the mandibular first molar residual roots was produced, then was scanned by CT. The model was reconstructed and assembled by MIMICS. The stress distribution of the root canal and root section under the vertical load and lateral load with different bonding systems were analyzed. RESULTS: Three-dimensional finite element model of two-piece post crown to the mandibular first molar residual roots was established. With the increasing of elastic modulus of the adhesives, the maximum stress within the root canal was also increasing. Elastic modulus of zinc phosphate was the biggest, so the stress within the root canal was the biggest; elastic modulus of Superbond C&B was the smallest, so the stress within the root canal was the smallest. Lateral loading stress was much larger than the vertical load. Under vertical load, the load on the root section was even with different bonding systems. Under lateral load, the maximum stress was much larger than the vertical load. The stress on the root section was minimum using zinc phosphate binder, and the stress on the root section was maximum using Superbond C&B. CONCLUSION: In two-piece post crown restorations, there is significant difference between different adhesives on tooth protection. When the tooth structure of the root canal orifices is weak, in order to avoid the occurrence of splitting, the larger elastic modulus bonding system is the first choice, such as zinc phosphate binder. When the resistance form of the root canal orifices is good enough but the root is too weak, it is suggested that the smaller elastic modulus bonding system is the first choice, such as Superbond C&B.

[Relation analysis of phosphorus removal and BOD5 loading using PHB monitoring in A2/O process].

In a pilot-scale anaerobic-anoxic-oxic experimental system for municipal wastewater treatment, PHB consumption in an oxic tank and PHB production in an anaerobic tank had been monitored overtime, and relations among PHB consumption/production, phosphorus removal/release and BOD5 loading had been analyzed. The results indicated that the consumption of PHB was positively related with phosphorus removal, and about 140 mg PHB consumption could result in 1 mg P removal. In the anaerobic tank, about 1.17 mg P release could result in 100 mg PHB production. The PHB production at the loading of 0.176 g/(g x d) was 4 mg/g MLSS less than that at 0.413 g/(g x d). No significant relevance was observed between PHB and BOD5 removal. The PHB of microorganism synthesizes was increased with the increase of temperature. Compared with the lowest temperature (17.1 degrees C), 20% of the total PHB content was increased at the maximum temperature (33.2 degrees C) in active sludge.