Spinal disorders and mastication: The potential relationship between adolescent idiopathic scoliosis and alterations of the chewing patterns.

OBJECTIVE: To evaluate mastication in a group of patients with adolescent idiopathic scoliosis (AIS) with a control group, by means of the prevalence of reverse chewing cycles (RCCs). MATERIAL AND METHODS: This study included a group of patients (N = 32; F = 24; M = 8; mean age ± SD = 14 ± 3 years) with a confirmed diagnosis of AIS and a group of control subjects (N = 32; F = 24; M = 8; mean age ± SD = 13 ± 6 years) without spinal disorders. Mastication was recorded with both a hard and a soft bolus, following a standardized protocol, and the prevalence of RCCs was compared between the groups. RESULTS: The prevalence of RCCs was significantly higher in the AIS group, with both a soft and a hard bolus, compared to the control group (P < .001). CONCLUSION: The results of this study indicate that the presence of AIS influences mastication, one of the main functions of the stomatognathic system. A multidisciplinary approach to these patients may be relevant in providing the best possible treatment outcomes.

Where do you live? North versus Central-South differences in relation to Italian patients with oral lichen planus: a cross-sectional study from the SIPMO (Italian Society of Oral Pathology and Medicine).

BACKGROUND: Oral lichen planus (OLP) is an immune-mediated inflammatory chronic disease of the oral mucosa, with different patterns of clinical manifestations which range from keratotic manifestations (K-OLP) to predominantly non-keratotic lesions (nK-OLP). The aim of the study was to analyze the differences in the clinical, psychological profile and symptoms between Italian patients of the North and Central-South with K-OLP and nK-OLP. METHODS: 270 K-OLP and 270 nK-OLP patients were recruited in 15 Italian universities. The Numeric Rating Scale (NRS), Total Pain Rating Index (T-PRI), Hamilton Rating Scales for Depression and for Anxiety (HAM-D and HAM-A), Pittsburgh Sleep Quality Index (PSQI), and Epworth Sleepiness Scale (ESS) were administered. RESULTS: The Central-South K-OLP (CS-K-OLP) patients reported a higher frequency of pain/burning compared with the K-OLP patients of the North (N-K-OLP) with higher scores in the NRS and T-PRI (p value < 0.001**). The CS-K-OLP and the CS-nK-OLP patients showed higher scores in the HAM-D, HAM-A, PSQI and ESS compared with the Northern patients (p value < 0.001**). Multivariate logistic regression revealed that the NRS and T-PRI showed the greatest increase in the R2 value for the CS-K-OLP (DR2 = 9.6%; p value < 0.001**; DR2 = 9.7% p value < 0.001**; respectively) and that the oral symptoms (globus, itching and intraoral foreign body sensation) and PSQI showed the greatest increase in the R2 value for the CS-nK-OLP (DR2 = 5.6%; p value < 0.001**; DR2 = 4.5% p value < 0.001** respectively). CONCLUSIONS: Pain and mood disorders are predominant in patients with OLP in the Central-South of Italy. Clinicians should consider that the geographical living area may explain the differences in oral symptoms and psychological profile in OLP.

Pros and Cons of CAD/CAM Technology for Infection Prevention in Dental Settings during COVID-19 Outbreak.

The purpose of this commentary is to update the evidence reported in our previous review on the advantages and limitations of computer-aided design/computer-aided manufacturing technology in the promotion of dental business, as well as to guarantee patient and occupational safety. The COVID-19 pandemic led to an unprecedented focus on infection prevention; however, waves of COVID-19 follow one another, asymptomatic cases are nearly impossible to identify by triage in a dental setting, and the effectiveness of long-lasting immune protection through vaccination remains largely unknown. Different national laws and international guidelines (mainly USA-CDC, ECDC) have often brought about dissimilar awareness and operational choices, and in general, there has been very limited attention to this technology. Here, we discuss its advantages and limitations in light of: (a) presence of SARS-CoV-2 in the oral cavity, saliva, and dental biofilm and activation of dormant microbial infections; (b) the prevention of SARS-CoV-2 transmission by aerosol and fomite contamination; (c) the detection of various oral manifestations of COVID-19; (d) specific information for the reprocessing of the scanner tip and the ward from the manufacturers.

Quantitative investigation of the esthetic impact of lip prominence in relation to the esthetic line.

INTRODUCTION: The purpose of this quantitative investigation was to assess the influence of lip prominence in relation to the esthetic line (E-line) on perceived attractiveness and threshold values of desire for treatment. METHODS: The lip prominence of an idealized silhouette male white profile image was altered incrementally between -16 mm to 4 mm from the E-line. The images were rated on a Likert scale by pretreatment orthognathic patients (n = 75), laypeople (n = 75), and clinicians (n = 35). RESULTS: In terms of perceived attractiveness, lips to E-line distance within the ranges of -12 mm to -16 mm and 0-4 mm in relation to the E-line was associated with a reduction in median attractiveness scores to below 4 in the patient and clinician groups of observers; for the lay group, the corresponding ranges were -14 mm to -16 mm and 2-4 mm. Relative lip prominence appears to be viewed as more attractive than lip retrusion. Clinicians were generally least likely to suggest treatment for varying levels of bilabial position. For a number of the images, there was reasonable agreement among clinicians and laypeople regarding whether treatment is required. For the clinician group, the only categories for desire for treatment were at a lip to E-line distance within the ranges of -14 mm to -16 mm and 2-4 mm. CONCLUSIONS: It is recommended that the range of normal variability of the prominence of the lips and threshold values of the desire for treatment be considered in planning.

The Opinion of Different Observer Groups About the Esthetic Impact and Need for Surgical Correction of Varying Submental Lengths.

PURPOSE: This study evaluated the opinion of different observer groups about the influence of the submental length on perceived attractiveness and when surgical correction was deemed necessary. MATERIALS AND METHODS: The submental length of an idealized silhouette of a white male profile was altered incrementally between 5 and 95 mm. Images were rated for attractiveness on a Likert scale by pretreatment orthognathic surgery patients (n = 75), laypersons (n = 75), and clinicians (maxillofacial surgeons and orthodontists) (n = 35). RESULTS: For perceived attractiveness, the ideal submental length was approximately 50 mm (range, 40 to 75 mm). A submental length shorter than or equal to 30 mm was deemed unattractive by all 3 groups. Overall, a submental length less than 40 mm generally was judged less attractive than a comparable increase in length. Clinicians were generally least likely to suggest surgery for varying submental lengths. For this group, the cutoff at which the majority suggested surgery was a submental length of 25 mm or less. For the patient and layperson groups, the corresponding cutoff values were a length shorter than or equal to 30 mm or equal to 95 mm. CONCLUSIONS: A submental length of approximately 50 mm (range, 40 to 75 mm) was viewed by most observers as attractive. At 30 mm or less, it was generally deemed progressively less attractive. Clinicians were less likely to suggest corrective surgery than were the patient and layperson groups. For comparative proportional relationships, the submental length should be between the lower lip-chin height and lower facial height, assuming an otherwise proportional facial profile.

Effect of Surgery First Orthognathic Approach on the Temporomandibular Joint.

INTRODUCTION: Correction of severe malocclusions with skeletal discrepancies requires orthodontic treatment in combination with orthognathic surgery. Even though conventional orthognathic surgery (COS) is a common and well-accepted approach its influence on the signs and symptoms of temporomandibular disorders (TMDs) is still debated. Recently with the introduction of surgery first approach, a different timing for the management of dentoskeletal imbalances has been proposed. The present study is aimed at assessing the relationship between surgery first approach and temporomandibular joint (TMJ) disorders. METHODS: The study sample consisted of 24 patients who were selected to be treated with surgery first approach. Clinical follow-ups after surgery were performed every week for the first month, at 3 months, 6 months, and at 1 year. A radiological follow-up was performed at 1 week and at 1 year after the operation with a panorex and a latero-lateral teleradiograph. To assess the effect of surgery first approach on the TMDs signs and symptoms, a clinical assessment was performed 4 days before surgery (T1), 6 months after surgery (T2), and 1 year postoperatively (T3). RESULTS: The results of the authors' study show that pain assessment revealed a general improvement of this symptom in correspondence to TMJ and masticatory muscles except in the masseter and neck region. Also joint noises, TMJ functioning, migraine, and headache underwent a considerable improvement. CONCLUSION: Surgery first approach is an innovative orthognathic procedure and, by undergoing surgery first approach, patients with pre-existing TMJ dysfunction may experience a significant improvement or even resolution of the TMDs signs and symptoms.

The Rules of Attractiveness: A Study on the Lower Facial Third.

What is considered attractive may not fall into the "norm," and it can vary from culture to culture and depending on the historical time, for this reason the standard cephalometric and antropometric references may not be sufficient in these cases.Lately some techniques have arose to popularity that are aimed to changing the frontal and lateral aspect of the facial lower third, such as V-line or the Chin-Wing Osteotomy technique, but no reference system exists at the moment to define to which extent a modification of the lower third falls within what is considered beautiful, and everything is left to the patient's will or to the surgeon's sensitivity.The aim of this article is to study which antropometric value is considered attractive by the most for what concerns the frontal shape of the lower third of the face.Twenty-four female models were enrolled in this study and the angle taken into consideration was the one at the intersection between the 2 lines connecting the cutaneous gonial angle of each side of the face and the most external part of the chin on the same side. Measures were made on pictures in frontal view.Two hundred two random examiners were asked to see the pictures and rate them as attractive or nonattractive.Results were then paired with the angles values.Among the models the higher angle measured was 107.5° (found in 1 individual) while the lower angle was 76° (found in 1 individual), the average measure calculated was 88.3° while the median angle was 89.5°.According to the result the subjects considered more attractive were those with an angle between 84.5 and 91.5 (92 for male examiners).This could be an important starting point for studies who can evaluate attractiveness from a numerical point of view.

Surgery-first orthognathic approach vs traditional orthognathic approach: Oral health-related quality of life assessed with 2 questionnaires.

INTRODUCTION: The purposes of the study were to investigate and evaluate the differences detected by the patients between the traditional orthognathic approach and the surgery-first one in terms of level of satisfaction and quality of life. METHODS: A total of 30 patients who underwent orthognathic surgery for correction of malocclusions were selected and included in this study. Fifteen patients were treated with the conventional orthognathic surgery approach, and 15 patients with the surgery-first approach. Variables were assessed through the Orthognathic Quality of Life Questionnaire and the Oral Health Impact Profile questionnaire and analyzed with 2-way repeated-measures analysis of variance. RESULTS: The results showed significant differences in terms of the Orthognathic Quality of Life Questionnaire (P <0.001) and the Oral Health Impact Profile (P <0.001) scores within groups between the first and last administrations of both questionnaires. Differences in the control group between first and second administrations were also significant. Questionnaire scores showed an immediate increase of quality of life after surgery in the surgery-first group and an initial worsening during orthodontic treatment in the traditional approach group followed by postoperative improvement. CONCLUSIONS: This study showed that the worsening of the facial profile during the traditional orthognathic surgery approach decompensation phase has a negative impact on the perception of patients' quality of life. Surgeons should consider the possibility of a surgery-first approach to prevent this occurrence.

Preserving the Bone Profile in Anterior Maxilla using an Equine Cortical Bone Membrane and an Equine Enzyme-treated Bone Graft: A Case Report with 5-year Follow-up.

AIM: This study aimed to report a well-succeeded use of equine enzyme-deantigenic cortical membrane and bone granules for guided bone regeneration (GBR) in the esthetic zone concomitant with implant placement. BACKGROUND: In the anterior maxilla, where patients typically have the highest expectations for implant-supported restorations, bone resorption in the wake of tooth loss often leads to a lack of soft tissue support and ultimately to unsatisfactory esthetic results. Buccal bone augmentation at the time of implant placement has thus become common. This is usually accomplished following GBR principles and employing membranes made from various materials to serve as a barrier between the soft tissue and graft material. One of the more recently introduced membrane materials is made from thin, flexible equine cortical bone, i.e., rendered nonantigenic in an enzymatic process that preserves native bone collagen. CASE REPORT: This report describes the treatment of a patient who received an equine enzyme-deantigenic graft and membrane in conjunction with placement of an implant in the right maxillary lateral incisor site. CONCLUSION: After 5 years of follow-up, the patient was very satisfied with her appearance. A cone-beam computed tomography scan showed that the peri-implant bone levels and ridge thickness had been maintained, and the cortical layer in the pristine ridge had also undergone remodeling. CLINICAL SIGNIFICANCE: Guided bone regeneration with the concomitant use of enzyme-deantigenic membrane and graft is a valuable and suitable option for effective implant-supported prosthetic rehabilitation in the esthetic zone.

The Medical Legal Aspects of Surgery First and a New Model of Consent Form.

The introduction of "surgery first" has resulted in a new requirement to compare and resolve medical legal problems which previously did not exist in traditional orthognathic surgery. The first issue relates to the relationship between the doctor and the patient and, in particular, the need to create a new informed consent form for surgery first. The second problem that has arisen with the arrival of surgery first concerns the relationship between health workers, namely the surgeon, and the orthodontist. The authors of this article propose a new template for informed consent specifically created for surgery first and also a model for the new working relationship between surgeons and orthodontists which will facilitate and improve co-operation between them. This will improve results, and guarantee a greater level of protection for the surgeon. It will also enable the identification the individual responsibilities of each person.

[Burning oral sensation: when is really BMS?]. / Az égo száj szindrómáról. Diagnózis és etiológia.

The aims and purposes of this systematic review of the international literature are to discuss and clarify some considerations on Burning Mouth Syndrome (BMS). Over the last 40 years, many researchers have addressed this disease clinically or experimentally. Thus, the etiology and pathogenesis of BMS remain unclear. We analyzed the etiopathogenesis of Burning Mouth Syndrome and of the burning oral sensation and currently, we could not find a consensus on the diagnosis and classification of BMS. Further studies are required to better understand the pathogenesis of BMS, and a "Gold Standard" classification is required because not every burning sensation in the mouth is BMS.

[Change in condylar and mandibular morphology in juvenile idiopathic arthritis: cone beam volumetric imaging]. / A fejecs és a mandibula morfológiájának változása juvenilis idiopátiás arthritisben: vizsgálatok cone beam CT-vel.

The aim of this study is to show the importance of Cone Beam Computerized Tomography to volumetrically quantify TMJ damage in patients with JIA, measuring condylar and mandibular real volumes. 34 children with temporomandibular involvement by Juvenile Idiopathic Arthritis were observed by Cone Beam Computerized Tomography. 4 were excluded because of several imaging noises. The mandible was isolated from others craniofacial structures; the whole mandibular volume and its components' volumes (condyle, ramus, hemibody, hemisymphysis on right side and on left side) has been calculated by a 3D volume rendering technique. The results show a highly significant statistical difference between affected side volumetric values versus normal side volumetric values above all on condyle region (P < 0.01), while they don't show any statistical differences between right side versus left side. The Cone Beam Computerized Tomography represents a huge improvement in understanding of the condyle and mandibular morphological changes, even in the early stages of the Juvenile Idiopathic Arthritis. The JIA can lead in children to temporomandibular joint damage with facial development and growth alterations.

A bone density-measuring micromotor distinguishes different cortical/cancellous combinations in vitro: a study using polyurethane foam blocks.

PURPOSE: In the clinical setting, assessing bone quality and quantity at the implant site is the basis to select implant characteristics and the insertion protocol to be applied. However, a quantitative method to classify bone quality and quantity is still lacking. A recently introduced implant placement micromotor that provides site-specific, operator-independent cancellous bone density measurements may be useful for this purpose, but it remains unknown whether this device can detect the presence of a cortical bone layer and measure its thickness and density. MATERIALS AND METHODS: Thus, an in vitro experiment was performed on six double-layer polyurethane foam blocks mimicking the jaw bone with different cortical thickness/cancellous density combinations. The densities were measured using the micromotor, either removing the cortical layer or leaving it intact, with and without irrigation. RESULTS: The results collected in each condition were compared by means of non-parametric statistical tests. Independent of irrigation, the micromotor detected the cortical layer when it was left intact and accurately estimated its thickness. The micromotor did not discriminate each block from the other ones when they were considered separately, but it did when they were grouped into four or three classes. CONCLUSION: The present study suggested that the micromotor may represent a valid device to quantitatively assess bone quality and density. If the micromotor can quantitatively distinguish different cortical/cancellous bone combinations in humans, it may be a helpful tool to define finely-tuned, patient-tailored preparations of the implant seat, making teeth rehabilitation in challenging clinical conditions more predictable.

Arthrogryposis multiplex congenita with maxillofacial involvement: a case report.

BACKGROUND: Arthrogryposis multiplex congenita is a rare condition that mainly involves the lower limbs, characterized by severe joint deformity and contracture, muscular atrophy, and functional impairment. Its clinical manifestations are heterogenous and may involve the maxillofacial district as well. CASE PRESENTATION: This case report describes a 20-year-old patient with arthrogryposis multiplex congenita with skeletal crossbite, facial asymmetry, reduced mouth opening and absence of lateral mandibular movement on the left side. After clinical evaluation, the following exams were required: postero-anterior cephalometric tracing, head and neck electromyography, computerized axiography, computed tomography scan, and maxillofacial magnetic resonance imaging. Orthognathodontic evaluation indicated skeletal asymmetry, reduced condylar movements on the left side and abnormally low electromyography activity of the masticatory muscles on the left side. Computed tomography and magnetic resonance imaging revealed unilateral left mandibular hypoplasia, hypotrophy, and fatty infiltration of masticatory muscles on the left side, as well as immobility of the left condyle during mouth opening, and hypoplasia of the left articular disk, which was however not displaced. Surgery was not indicated and conservative orthognathodontic treatment with function generating bite was suggested to balance the occlusal plane, as well as stretching exercises. CONCLUSIONS: A rare case of arthrogryposis multiplex congenita with maxillofacial involvement illustrates that a patient-centred, multidisciplinary approach with accurate diagnosis is required to formulate the best treatment plan. Because of the considerable damage to the masticatory muscles, conservative orthognathodontic therapy may be the best treatment option.

"Association between posterior unilateral functional crossbite and asymmetrical spinal flexion: A prospective study".

Background: Unilateral posterior crossbite (UPC) with functional shift is a malocclusion that may have the potential to affect the masticatory function and the flexibility of the spine due to intrinsic occlusal, structural and functional asymmetries sustained by marked asymmetrical muscular activation. Research question: To investigate whether the presence of UPC with functional shift is associated with reverse chewing pattern and altered spine flexion. Methods: Patients with UPC and a control group of patients with normal occlusion were recorded when chewing soft and hard boluses using a Kinesiograph (Myotronics-Noromed Inc., USA) and spine alignment was assessed with an electronic inclinometer Spinal Mouse® system (Idiag AG, Switzerland). Results: There were 87 children with UPC in the patients' group among whom 38, with median (IQR) age 8.0 (7.3-9.3) years, had measurements before and after treatment. The UPC patients showed a higher percentage of anomalous/reverse chewing patterns on the crossbite side compared with a control group (p < 0.001). Moreover, a clear difference was observed between left and right flexion angles of the spine in the patients' group (p < 0.001 and p = 0.001, paired t-test) with the crossbite side being more flexible compared to the non-crossbite side. No such differences were seen in the control group, nor post-treatment for right and left crossbite (p = 0.44 and p = 0.15 respectively, paired t-test). Significance: This study suggests an association between UPC, asymmetrical chewing patterns and asymmetrical flexion of the spine. These results may help improve understanding of any association between dental malocclusions and spine posture and hence aid diagnosis and treatment strategies.

A comparison between anorganic bone and collagen-preserving bone xenografts for alveolar ridge preservation: systematic review and future perspectives.

After tooth extraction, dimensional changes affect the alveolar socket, leading to loss in alveolar bone height and width. Histological modifications also occur, with initial formation of a blood clot that is replaced with granulation tissue and subsequently with a provisional connective tissue matrix. Spontaneous healing ends with socket filling with woven bone, which is gradually replaced with lamellar bone and bone marrow. Adequate alveolar ridge dimensions and bone quality are required to assure optimal stability and osseointegration following dental implant placement. When a tooth is extracted, alveolar ridge preservation (ARP) procedures are an effective method to prevent collapse of the post-extraction socket. Heterologous bone is widely chosen by clinicians for ARP, and anorganic bone xenografts (ABXs) made bioinert by heat treatment represents the most used biomaterial in clinical applications. Collagen-preserving bone xenografts (CBXs) made of porcine or equine bone are fabricated by less invasive chemical or enzymatic treatments to remove xenogenic antigens, and these are also effective in preserving post-extraction sites. Clinical differences between anorganic bone substitutes and collagen-preserving materials are not well documented in the literature but understanding these differences could clarify how processing protocols influence biomaterial behavior in situ. This systematic review of the literature compares the dimensional changes and histological features of ABXs versus CBXs in ridge preservation procedures to promote awareness of different bone xenograft efficacies in stimulating the healing of post-extraction sockets.

Photobiomodulation and Miescher's cheilitis granulomatosa: case report.

BACKGROUND: Miescher's cheilitis granulomatosa (MCG) is a rare chronic inflammatory disease and is known as the monosymptomatic clinical form of Melkersson-Rosenthal syndrome (MRS). It is characterised by swelling of one or both lips and more frequently affects the upper lip. Histopathological findings show the presence of numerous inflammatory infiltrates and granuloma formations. Pharmacological treatments and surgery have provided results that are positive yet insufficiently stable in the long term. The clinical case described is of a 68-year-old female patient with a diagnosis of MCG of the upper lip. CASE PRESENTATION: The patient was diagnosed and treated at the Oral Medicine and Oral Pathology outpatient clinic of Maxillofacial and Odontostomatology Unit, Fondazione Cà Granda IRCCS Ospedale Maggiore Policlinico. The patient was recommended localised treatments of photobiomodulation (PBM) using a diode laser with a 635 nm and 980 nm dual-wavelength (λ) approach, a 600-micron fibre, and a handpiece with a 1-cm-diameter lens at 300 mW. Three treatments a week were administered for four weeks for a total of 12 treatment sessions (T 1-T 12). After that, the patient had a long follow-up period of about 2 years. The therapeutic results were clear from the initial stages of treatment. There was an immediate, gradual, and consistent reduction in labial swelling. A reduction in the size of the lip by about 35% at T 10-T 12 was observed, returning the size and volume of the upper lip within the normal clinical range. The painful symptoms subsided after the seventh treatment (T 7). The histopathological check at 3 months and the follow-up in particular confirmed the disease was in remission with satisfactorily stable treatment results. Moreover, the patient did not use any other treatments on the area from the early laser treatments through to the end of the follow-up period. CONCLUSIONS: Our experience describes a clinical case of MCG treated with PBM and effectively resolved with a reduction of the lip swelling. The real success of the treatment emerged over time, showing that the tissue healing was stable. In absence of any collateral phenomena, this confirms the effective and documented therapeutic potential of PBM for chronic inflammatory infiltrates.

Analysing chin prominence in relation to the lower lip: The lower lip-chin prominence angle.

The purpose of this investigation is to describe a potentially useful analysis in assessing the required extent of sagittal chin augmentation or set-back, by relating chin prominence to lower lip position using the 'lower lip-chin prominence angle'. The secondary aim was to quantitatively evaluate the influence of this angle on perceived attractiveness and desire for surgery. Having described this angular analysis, a quantitative evaluation was undertaken by incrementally altering the angle on an idealised profile image to create a range of images that were rated on a 7-point Likert scale by a pre-selected group of pre-treatment orthognathic patients, clinicians and laypeople. In treatment planning alterations in chin prominence, an 'ideal' sagittal position with soft tissue pogonion on or just behind a true vertical line through the most prominent point of the lower lip may be used. Chin retrusion or prominence up to an angle of 15° retrusion to -5° prominence is deemed acceptable. Surgery is desired from chin prominence of greater than -15° and retrusions greater than 25°. The greater the retrusion or prominence of the chin from an angle of 0°, the less the perceived attractiveness and the greater the desire for surgical correction.

Current status of the surgery-first approach (part I): concepts and orthodontic protocols.

The "surgery-first" approach, defined as a team approach between surgeons and orthodontists for orthognathic surgery without preoperative orthodontic treatment, is aimed at dental decompensation. A brief historical background and indications for the surgery-first approach are reviewed. Considering the complicated mechanism of postoperative orthodontic treatment, the proper selection of patients is a vital component of successful surgery-first approach.