miR-140-5p-mediated regulation of the proliferation and differentiation of human dental pulp stem cells occurs through the lipopolysaccharide/toll-like receptor 4 signaling pathway.

Human dental pulp stem cells (DPSCs) are oral mesenchymal stem cells with potential to differentiate into various cell types. Recent studies of DPSCs have focused on microRNAs (miRNAs), a class of small noncoding RNAs that play crucial roles in regulating DPSC phenotypes. In the current study, the expression of miR-140-5p was significantly decreased during lipopolysaccharide (LPS)-mediated differentiation of DPSCs in vitro. Overexpression of miR-140-5p enhanced proliferation of DPSCs and inhibited DPSC differentiation, whereas suppression of miR-140-5p produced the opposite effect. Moreover, the expression of toll-like receptor 4 (TLR-4), a critical regulator of DPSCs, was negatively correlated with the levels of miR-140-5p. A luciferase reporter analysis confirmed that miR-140-5p could regulate TLR-4 by directly binding to the 3'-untranslated region (3'-UTR) of the TLR4 mRNA. Additionally, we suppressed TLR-4 expression by treating cells with a TLR-4 inhibitor, CLI-095, and demonstrated that the effect of the miR-140-5p inhibitor on DPSC proliferation and differentiation could be partially reversed by blocking TLR-4. Taken together, our data suggest that miR-140-5p is a novel miRNA that regulates DPSC proliferation and differentiation.

[Distribution, Respiratory Exposure, and Traceability of Atmospheric Microplastics in Yichang City].

As an emerging environmental pollutant, microplastics have attracted much attention, but the sources and health hazards of atmospheric microplastics (AMPs) remain unclear. In order to explore the distribution characteristics, assess the risk of human respiratory exposure, and analyze the sources of AMPs in different functional areas of Yichang City, AMPs samples from 16 observation points were collected and analyzed, and the HYSPLIT model was used. The results showed that the main shapes of AMPs in Yichang City were fiber, fragment, and film, and six colors were observed including transparent, red, black, green, yellow, and purple. The smallest size was 10.42 µm, and the largest was 4761.42 µm. The deposition flux of AMPs was (4400±474) n·(m2·d)-1. The types of APMs were polyester fiber (PET), acrylonitrile-butadiene-styrene copolymer (ABS), polyamide (PA), rubber (Rubber), polyethylene (PE), cellulose acetate (CA), and polyacrylonitrile (PAN). The order of the subsidence flux in each functional area was as follows:urban residential area>agricultural production area>landfill>chemical industrial park>town residential area. The human respiratory exposure risk assessment models showed that the daily intake of AMPs (EDI) for adults and children in urban residential areas was higher than in town residential areas. The atmospheric backward trajectory simulation showed that the AMPs in the districts and counties of Yichang City mainly came from the surrounding areas via short-distance transportation. This study provided basic data support for the research on AMPs in the middle reaches of the Yangtze River and was of great significance for the traceability and health risk research of AMPs pollution.

A novel system for three-pulse drug release based on "tablets in capsule" device.

The objective of the present study was to obtain programmed drug delivery from a novel system, which contains a water-soluble cap, impermeable capsule body, and two multi-layered tablets. Types of materials for the modulating barrier and its weight can significantly affect the lag time (defined as the time when drug released 8% of the single pulse dosage). We chose sodium alginate and hydroxy-propyl methyl cellulose (HPMC E5) as the candidate modulating barrier material. Through adjusting ratio of sodium alginate and lactose, lag time was controllable between the first two pulsatile release. Linear relationship was observed between the ratio and the lag time. Through adjusting the ratio of HPMC E5/lactose, lag time between the second and the third pulse can be successfully modulated. In further studies, drug release rate of the second pulsatile dose can be improved by adding a separating layer between the third and the modulating barrier layer in the three-layered tablet. To evaluate contribution of bulking agent to drug release rate, lactose, sodium chloride, and effervescent blend were investigated. No superiority was found using sodium chloride and effervescent blend. However, lactose favored it. The results reveal that programmed drug delivery to achieve pulsatile drug release for three times daily can be obtained from these tablets in capsule system by systemic formulation approach.

Bioflocculant production by culture of Serratia ficaria and its application in wastewater treatment.

A bioflocculant-producing bacterium was isolated from soil and identified as Serratia ficaria. Using optimized culture conditions a flocculating activity of 95.4% was obtained. It was found to be effective for flocculation of a kaolin suspension over weakly acidic pH (5-7); divalent cations (Ca2+ and Mg2+) enhanced the flocculating activity, while the co-presence of Al3+ and Fe3+ resulted the negative effect. Measurements of zeta potential revealed that charge neutralization played an important role in the flocculation. It could flocculate a variety of real wastewaters, including river water, brewery wastewater, meat processing wastewater and soy sauce brewing wastewater. The bioflocculant was also used to treat pulp effluent, and the removal rate of color and chemical oxygen demand (COD) were up to 99.9% and 72.1%, respectively, which were better than traditional chemical flocculants.

PEGylated Perylenemonoimide-Dithienylethene for Super-Resolution Imaging of Liposomes.

We have designed and synthesized an amphiphilic photoswitchable fluorophore, PEGylated perylenemonoimide-dithienylethene (PEG-PMI-DTE), which exhibits evident bistable photochromism, fluorescence switching, and fatigue resistance. The fine nanostructures of liposomes can be observed directly under super-resolution fluorescent microscopy by aid of the amphiphilic photoswitchable fluorophore as a staining agent, with an optical resolution of 30 nm.

A novel stealth liposomal topotecan with amlodipine: apoptotic effect is associated with deletion of intracellular Ca2+ by amlodipine thus leading to an enhanced antitumor activity in leukemia.

The objectives of the present study were to define whether amlodipine induces apoptosis and what mechanism is involved in the process in human resistant and non-resistant leukemia cells following co-administration of stealth liposomal topotecan with amlodipine, a novel antiresistant liposomes developed by our institution. In three leukemias, K562, HL-60, and multidrug resistant (MDR) HL-60, cytotoxicity of topotecan was potentiated by amlodipine, while topotecan alone was resistant to MDR HL-60 cells. In two selected K562 or MDR HL-60 cells, the apoptotic effects were increased by addition of amlodipine, showing a dose-dependent manner. The activities of caspase 3 and 7 (marked as caspase 3/7), and caspase 8 were significantly activated by topotecan with amlodipine co-treated as the stealth liposomes. The deletions of intracellular Ca2+ stores induced by amlodipine correlated with the activated activities of caspase 3/7, or 8, respectively. In xenograft model with MDR HL-60 in nude mice, antitumor activity of stealth liposomal topotecan with amlodipine was significantly enhanced as compared to that of stealth liposomal topotecan or topotecan alone. In conclusion, apoptotic effect is associated with deletion of intracellular Ca2+ by amlodipine through activation of caspase 8 and then 3/7 activities. The enhanced antitumor activities by stealth liposomal topotecan with amlodipine are mainly due to the potentiating apoptotic effect and reversing the resistance by amlodipine. Stealth liposomal encapsulation of anticancer agent with a modulator may provide a novel strategy for improving the chemotherapeutic effects.

Accumulation of floating microplastics behind the Three Gorges Dam.

We investigated the occurrence and distribution of microplastics in surface water from the Three Gorges Reservoir. Nine samples were collected via trawl sampling with a 112 µmmesh net. The abundances of microplastics were from 3407.7 × 10(3) to 13,617.5 × 10(3) items per square kilometer in the main stream of the Yangtze River and from 192.5 × 10(3) to 11,889.7 × 10(3) items per square kilometer in the estuarine areas of four tributaries. The abundance of microplastics in the main stream of the Yangtze River generally increased as moving closer to the Three Gorges Dam. The microplastics are made exclusively of polyethylene (PE), polypropylene (PP), and polystyrene (PS). Together with microplastics, high abundance of coal/fly ash was also observed in the surface water samples. Comparing with previously reported data, microplastics in the TGR were approximately one to three orders of magnitudes greater, suggesting reservoirs as potential hot spot for microplastic pollution.

Rapid method for quantification of seven synthetic pigments in colored Chinese steamed buns using UFLC-MS/MS without SPE.

Synthetic pigments are still used instead of natural pigments in many foods and their residues in food could be an important risk to human health. A simple and rapid analytical method combining the low-cost extraction protocol with ultra-fast liquid chromatography-tandem quadrupole mass spectrometry (UFLC-MS/MS) was developed for the simultaneous determination of seven synthetic pigments used in colored Chinese steamed buns. For the first time, ethanol/ammonia solution/water (7:2:1, v/v/v) was used as extraction solution for the synthetic pigments in colored Chinese steamed buns. The results showed that the property of the extraction solution used in this method was more effective than critic acid solution, which is used in the polyamide adsorption method. The limits of quantification for the seven synthetic pigments ranged from 0.15 to 0.50 µg/kg. The present method was successfully applied to samples of colored Chinese steamed buns for food-safety risk monitoring in Zhejiang Province, China. The results found sunset yellow pigment in six out of 300 colored Chinese steamed buns (from 0.50 to 32.6 µg/kg).

Enhanced therapeutic effects on the multi-drug resistant human leukemia cells in vitro and xenograft in mice using the stealthy liposomal vincristine plus quinacrine.

The multi-drug resistance (MDR) could be caused by the over-expression of adenosine triphosphate binding cassette transporters such as p-glycoprotein, thereby resulting in the efflux of anti-cancer drugs from the cells. An anti-resistant stealthy liposomal vincristine plus quinacrine was defined in this study. Human chronic myelogenous leukemia K562 and MDR K562 cells were included for comparisons. Anti-tumor activity studies were performed on female BALB/c nude mice with MDR K562 cell xenografts. Results showed that quinacrine was effective in reversing the resistance in the MDR K562 cells, and enhanced the anti-tumor effect of vincristine in K562 cells. The caspase-9 and -3 activities in the MDR K562 and K562 cells were increased with the dose rise of quinacrine. In the MDR K562 cell xenografts in mice, the anti-resistant tumor effect of the stealthy liposomal vincristine plus quinacrine was evidently observed. The enhanced anti-tumor effects of vincristine by quinacrine in the resistant/non-resistant K562 cells could be because of the direct injury and the potentiating apoptotic effect of vincristine via activating the initiator caspase-9 and subsequently the effector caspase-3, and the long circulatory effect of stealthy liposomes. The stealthy liposomal encapsulation of vincristine plus quinacrine could be a potential therapeutic approach for resistant human leukemia.