Sensitive electrochemical detection of superoxide anion using gold nanoparticles distributed poly(methyl methacrylate)-polyaniline core-shell electrospun composite electrode.

In the present communication, a novel composite nanofibrous electrode is developed for the detection of superoxide anion (O(2)˙(-)) in phosphate buffered saline (PBS). The composite fiber electrode is fabricated by dispersing gold nanoparticles onto poly(methyl methacrylate) (PMMA)-polyaniline (PANI) core-shell electrospun nanofibers. The constructed architecture is proven to be a favorable environment for the immobilization of the enzyme, superoxide dismutase (SOD). Direct electron transfer is achieved between SOD and the electrode with an electron transfer rate constant of 8.93 s(-1). At an applied potential of +300 mV, PMMA/PANI-Au(nano)/SOD-ESCFM shows highly sensitive detection of O(2)˙(-). In addition to this, quantification of different activities of SOD is realized at PMMA/PANI-Au(nano)/SOD-ESCFM. These analytical features offer great potential for construction of the third-generation O(2)˙(-) biosensor.

Novel method to prepare polystyrene-based monolithic columns for chromatographic and electrophoretic separations by microwave irradiation.

Microwave irradiation can provide a viable alternative to the traditional means such as ultraviolet light and thermal initiation for the preparation of monolithic capillary columns. Polystyrene-based monolithic stationary phases were prepared in situ in fused-silica capillaries and simultaneously in vials. The column permeability, electrophoretic and chromatographic behavior were evaluated using pressure-assisted capillary electrochromatography (pCEC), capillary electrochromatography (CEC) and low pressure liquid chromatography (LPLC). With an optimal monolithic material, the largest theoretical plates for preparing the column could be close to 18,000 plates/m for thiourea in the mode of pCEC. Furthermore, the influence of the composition of the porogenic solvents (toluene/isooctane) on the morphology of organic-based monoliths [poly(styrene-divinylbenzene-methacrylic acid)] was systematically studied with mercury intrusion porosimetry and scanning electron microscopy. The monoliths which were prepared with a high content of isooctane had a bigger pore size and better permeability, and hence resulted in a faster separation.

Synthesis and characterization of processable multi-walled carbon nanotubes-sulfonated polydiphenylamine graft copolymers.

Water soluble and processable nanocomposites composed of multi-walled carbon nanotubes (MWNTs) and poly(diphenylamine sulfonic acid) (PDPASA) are synthesized and characterized. Two types of methodologies are adopted. MWNTs are covalently functionalized with 2,5-diaminobenzene sulfonic acid (DABSA) and further in situ polymerized with diphenylamine-4-sulfonic acid (DPASA). This results in the formation of nanocomposites, MWNT(DABSA)-g-PDPASA, in which PDPASA is presented as the graft chains onto MWNTs. In another approach, DPASA is in situ polymerized in presence of unfunctionalized MWNTs, results in a nanocomposite in which MWNTs are present as entrapped mass in PDPASA matrix. Both nanocomposites are found to be water soluble and can form free standing films. The conductivity of MWNT(DABSA)-g-PDPASA and MWNT/PDPASA is found to be 1.25 mS x cm(-1) and 0.65 mS x cm(-1), respectively, which is higher than that of pristine PDPASA (0.25 x 10(-5) S x cm(-1)). The nanocomposites are characterized for their structure, morphology, optical and thermal properties.

Fabrication of a gold nanoparticles decorated carbon nanotubes based novel modified electrode for the electrochemical detection of glucose.

A modified electrode based on gold nanoparticles decorated multiwall carbon nanotubes (MWNTs), MWNT-Au(nano)-ME is fabricated. MWNTs are functionalized with 4-aminothiophenol and coated over the glassy carbon electrode. Further, Au nanoparticles are deposited into MWNTs coated GC electrode by electrochemical reduction of HAuCl4. Field emission transmission electron microscope (FETEM) image shows the formation of approximately 5 nm sized Au nanoparticles without any agglomeration on the MWNTs surface. Further, the presence of Au nanoparticles is confirmed through X-ray photoelectron spectroscopic (XPS) studies. The electrocatalytic activity of the MWNT-Au(nano)-ME towards the detection of glucose is investigated. MWNT-Au(nano)-ME shows enhanced current response than pristine MWNT-ME over the entire (+0.05 to +0.80 V) potential range. The modified electrode shows linear response to current with the concentration of glucose between 1 and 20 mM. Larger current responses to glucose oxidation are witnessed at +0.60 V than at +0.05 V. However, a large interference signal, reflecting the accelerated oxidation of electroactive interference is observed at +0.60 V. No overlapping signal from the interferents such as ascorbic acid, acetaminophen, and dopamine are observed at the MWNT-Au(nano)-ME at +0.05 V. Further, the MWNT-Au(nano)-ME shows high resistance to the toxictiy of chloride ions.

Enhanced electrochemical detection of ketorolac tromethamine at polypyrrole modified glassy carbon electrode.

A glassy carbon electrode modified with a coating of polypyrrole (Ppy) exhibited an attractive performance for the detection and determination of a non-steroidal and non-narcotic analgesic compound, ketorolac tromethamine (KT). Cyclic voltammetry, differential pulse and square wave voltammetry were used in a combined way to identify the electrochemical characteristics and to optimize the conditions for detection. For calibrating and estimating KT, square-wave voltammetry was mainly used. The drug shows a well-defined peak at -1.40 V vs. Ag/AgCl in the acetate buffer (pH 5.5). The existence of Ppy on the surface of the electrode gives higher electrochemical active sites at the electrode for the detection of KT and preconcentrate KT by adsorption. The square-wave stripping voltammetric response depends on the excitation signal and the accumulation time. The calibration curve is linear in the range 1 x 10(-11) to 1 x 10(-7) M with a detection limit of 1.0 x 10(-12) M. Applicability to serum samples was also demonstrated. A detection limit of 1.0 ng ml for serum was observed. Square-wave voltammetry shows superior performance over UV spectroscopy and other techniques.

Incorporation of silver nanoparticles on the surface of orthodontic microimplants to achieve antimicrobial properties.

OBJECTIVE: Microbial aggregation around dental implants can lead to loss/loosening of the implants. This study was aimed at surface treating titanium microimplants with silver nanoparticles (AgNPs) to achieve antibacterial properties. METHODS: AgNP-modified titanium microimplants (Ti-nAg) were prepared using two methods. The first method involved coating the microimplants with regular AgNPs (Ti-AgNP) and the second involved coating them with a AgNP-coated biopolymer (Ti-BP-AgNP). The topologies, microstructures, and chemical compositions of the surfaces of the Ti-nAg were characterized by scanning electron microscopy (SEM) equipped with energy-dispersive spectrometer (EDS) and X-ray photoelectron spectroscopy (XPS). Disk diffusion tests using Streptococcus mutans, Streptococcus sanguinis, and Aggregatibacter actinomycetemcomitans were performed to test the antibacterial activity of the Ti-nAg microimplants. RESULTS: SEM revealed that only a meager amount of AgNPs was sparsely deposited on the Ti-AgNP surface with the first method, while a layer of AgNP-coated biopolymer extended along the Ti-BP-AgNP surface in the second method. The diameters of the coated nanoparticles were in the range of 10 to 30 nm. EDS revealed 1.05 atomic % of Ag on the surface of the Ti-AgNP and an astounding 21.2 atomic % on the surface of the Ti-BP-AgNP. XPS confirmed the metallic state of silver on the Ti-BP-AgNP surface. After 24 hours of incubation, clear zones of inhibition were seen around the Ti-BP-AgNP microimplants in all three test bacterial culture plates, whereas no antibacterial effect was observed with the Ti-AgNP microimplants. CONCLUSIONS: Titanium microimplants modified with Ti-BP-AgNP exhibit excellent antibacterial properties, making them a promising implantable biomaterial.

Fabrication and electrocatalysis of self-assembly directed gold nanoparticles anchored carbon nanotubes modified electrode.

A self-assembly directed approach was adopted to modify glassy carbon electrode (GC) with gold nanoparticles incorporation and the electrocatalytic performance of self-assembly modified electrode, GC/SA-Au-ME was critically evaluated for the oxidation of ascorbic acid (AA). The modification involves the dispersion of multi-wall carbon nanotube (MWNT) and an inclusion complex, beta-cyclodextrin-4-aminothiophenol on the surface of GC electrode in the presence of cetyltrimethylammonium bromide (CTAB). Gold nanoparticles were deposited into the self-assembled sites to fabricate the modified electrode, GC/SA-Au-ME. Another electrode (GC-Au-ME) was fabricated under similar conditions in the absence of CTAB. The electrocatalytic activity of the modified electrodes (GC/SA-Au-ME and GC-Au-ME) towards the oxidation of AA was critically compared. Cyclic voltammetry, chronoamperometry, and double potential chronoamperometry were used to evaluate the characteristics of the modified electrodes. The self-assembled electrode (GC/SA-Au-ME) shows excellent electrocatalytic activity over the other electrode, GC-Au-ME. Augmented current response, faster electron transfer kinetics (with a rate constant for electron transfer process as 3.25 x 10(4) cm3 mol(-1) s(-1)), linear range of response for the analyte (1-50 mM with an extended detection limit to 1 microM), better sensitivity, and selectivity were witnessed for the self-assembly directed modified electrode.

Development of a novel cyano group containing electrochemically deposited polymer film for ultrasensitive simultaneous detection of trace level cadmium and lead.

Poly(diphenylamine-co-2-aminobenzonitrile) (P(DPA-co-2ABN)), a cyano group containing conducting polyaniline derivative, has been electrodeposited developed as the new material and utilized for the simultaneous electrochemical determination of trace levels of cadmium (Cd(2+)) and lead (Pb(2+)). P(DPA-co-2ABN) film preconcentrates effectively through cyano chelation and electrochemically strips the heavy metal ions with well separated potentials, which are beneficially utilized for ppb level simultaneous detection of Cd(2+) and Pb(2+). Differential pulse voltammetry studies revealed that Cd(2+) and Pb(2+) ions were simultaneously stripped with well-defined, separated and sharp peaks for Cd(2+) and Pb(2+). The influence of various operational parameters such as pulse amplitude, pulse time, scan rate, initial potential, end potential, accumulation potential and accumulation time on the electrochemical stripping of heavy metals were investigated in details. Under the optimal conditions, good linear correlations were obtained from 1.26 to 907.8 ppm for Cd(2+) and 0.26 to 58.73 ppm for Pb(2+), respectively. Low detection limits for Cd(2+) and Pb(2+), 0.255 ppm and 0.165 ppm, respectively, were observed. The practical utility of the new procedure was demonstrated in real samples.

Preparation of poly(2-amino thiophenol) nanodiscs by a "combined hard-soft template" approach and characterization.

A seed induced chemical oxidative polymerization was used for the preparation of pure poly(2-amino thiophenol) nanodiscs (P2AT-NDs (P)). Two templates, (hard (MCM-41) and soft (ß-napthalene sulfonic acid), were utilized for the preparation of the seed, P2AT nanostructures loaded MCM-41. The field emission scanning electron microscopy reveals nanodisc morphology for P2AT (P). X-ray diffraction, current-potential characteristics and electrochemical impedance spectroscopy were used to evaluate the physicochemical properties of P2AT-ND (P). The P2AT-ND (P) exhibits semicrystalline behaviour, good electron transport and lesser charge transfer resistance at the interface as compared to simple P2AT prepared by conventional chemical route.