Rapid growth of Moso bamboo (Phyllostachys edulis): Cellular roadmaps, transcriptome dynamics, and environmental factors.

Moso bamboo (Phyllostachys edulis) shows remarkably rapid growth (114.5 cm/day), but the underlying biological mechanisms remain unclear. After examining more than 12,750 internodes from more than 510 culms from 17 Moso populations, we identified internode 18 as a representative internode for rapid growth. This internode includes a 2-cm cell division zone (DZ), a cell elongation zone up to 12 cm, and a secondary cell wall (SCW) thickening zone. These zones elongated 11.8 cm, produced approximately 570,000,000 cells, and deposited ∼28 mg g-1 dry weight (DW) lignin and ∼44 mg g-1 DW cellulose daily, far exceeding vegetative growth observed in other plants. We used anatomical, mathematical, physiological, and genomic data to characterize development and transcriptional networks during rapid growth in internode 18. Our results suggest that (1) gibberellin may directly trigger the rapid growth of Moso shoots, (2) decreased cytokinin and increased auxin accumulation may trigger cell DZ elongation, and (3) abscisic acid and mechanical pressure may stimulate rapid SCW thickening via MYB83L. We conclude that internode length involves a possible tradeoff mediated by mechanical pressure caused by rapid growth, possibly influenced by environmental temperature and regulated by genes related to cell division and elongation. Our results provide insight into the rapid growth of Moso bamboo.

Based on network pharmacology and molecular docking to explore the potential mechanism of shikonin in periodontitis.

OBJECTIVES: To investigate the potential mechanisms of shikonin in preventing and treating periodontitis using network pharmacology and molecular docking methods. MATERIALS AND METHODS: The targets of shikonin were obtained in TCMSP and SEA databases, and targets of periodontitis were gathered from the OMIM, GeneCards and Drugbank Databases. The intersecting targets were entered into the DAVID database to obtain the relevant biological functions and pathways by GO and KEGG enrichment analysis. The obtained targets were analysed the protein-protein interaction (PPI) in STRING platform. In Cytoscape 3.8.0, the network analysis function with the MCODE plug-in were used to obtain the key targets, of shikonin and periodontitis. Molecular docking and molecular dynamics simulation (MD) were used to assess the affinity between the shikonin and the key targets. RESULTS: Shikonin was screened for 22 targets and periodontitis was screened for 944 targets, the intersecting targets were considered as potential therapeutic targets. The targets played important roles in cellular response to hypoxia, response to xenobiotic stimulus and positive regulates of apoptotic process by GO enrichment analysis. 10 significant pathways were analyzed by KEGG, such as human cytomegalovirus infection and PI3K-Akt signaling pathway, etc. Cytoscape software screened the key genes including AKT1, CCL5, CXCR4, PPARG, PTEN, PTGS2 and TP53. Molecular docking and MD results showed that shikonin could bind stably to the targets. CONCLUSIONS: The present study enriched the molecular mechanisms in periodontitis with shikonin, providing potential therapeutic targets for periodontitis.

Graphene oxide bulk material reinforced by heterophase platelets with multiscale interface crosslinking.

Graphene oxide (GO) and reduced GO possess robust mechanical, electrical and chemical properties. Their nanocomposites have been extensively explored for applications in diverse fields. However, due to the high flexibility and weak interlayer interactions of GO nanosheets, the flexural mechanical properties of GO-based composites, especially in bulk materials, are largely constrained, which hinders their performance in practical applications. Here, inspired by the amorphous/crystalline feature of the heterophase within nacreous platelets, we present a centimetre-sized, GO-based bulk material consisting of building blocks of GO and amorphous/crystalline leaf-like MnO2 hexagon nanosheets adhered together with polymer-based crosslinkers. These building blocks are stacked and hot-pressed with further crosslinking between the layers to form a GO/MnO2-based layered (GML) bulk material. The resultant GML bulk material exhibits a flexural strength of 231.2 MPa. Moreover, the material exhibits sufficient fracture toughness and strong impact resistance while being light in weight. Experimental and numerical analyses indicate that the ordered heterophase structure and synergetic crosslinking interactions across multiscale interfaces lead to the superior mechanical properties of the material. These results are expected to provide insights into the design of structural materials and potential applications of high-performance GO-based bulk materials in aerospace, biomedicine and electronics.

Impacts of hydraulic conditions on microplastics biofilm development, shear stresses distribution, and microbial community structures in drinking water distribution pipes.

Both microplastic and biofilm are contamination sources in drinking water, but their integrated impacts on water quality have been rarely studied, especially in drinking water distribution pipes with complex hydraulic conditions. This study explored the impacts of hydraulic conditions (0-2 m/s) on microplastic biofilm (MP-BM) development, shear stresses distribution, and microbial community structures. The research was conducted for two weeks using a pilot test device to simulate practical water pipes. The following were the primary conclusions: (1) According to morphology analysis, clusters (>5 µm) significantly increased in the plastisphere when the flow velocity ranged from 0.55 m/s to 0.95 m/s, and average size of clusters decreased when the flow velocity ranged from 1.14 m/s to 1.40 m/s (2) Characteristics of MP-BM impact shear stress on both plastisphere and pipe wall biofilm. Shear stresses were positively correlated with flow velocity, number of MP-BM, and size of MP-BM, while negatively correlated with diameters of pipes. (3) 31 genera changed strictly and monotonously with the fluid velocity, accounting for 15.42%. Opportunistic pathogens in MP-BM such as Sediminibacterium, Curvibacter, and Flavobacterium were more sensitive to hydraulic conditions. Moreover, microplastics (<100 µm) deserve more attention to avoid human ingestion and to prevent mechanical damage and bio-chemical risks.

Cellular differentiation, hormonal gradient, and molecular alternation between the division zone and the elongation zone of bamboo internodes.

Bamboo differentiates a cell division zone (DZ) and a cell elongation zone (EZ) to promote internode elongation during rapid growth. However, the biological mechanisms underlying this sectioned growth behavior are still unknown. Using histological, physiological, and genomic data, we found that the cell wall and other subcellular organelles such as chloroplasts are more developed in the EZ. Abundant hydrogen peroxide accumulated in the pith cells of the EZ, and stomata formed completely in the EZ. In contrast, most cells in the DZ were in an undifferentiated state with wrinkled cell walls and dense cytoplasm. Hormone detection revealed that the levels of gibberellin, auxin, cytokinin, and brassinosteroid were higher in the DZ than in the EZ. However, the levels of salicylic acid and jasmonic acid were higher in the EZ than in the DZ. Transcriptome analysis with qRT-PCR quantification revealed that the transcripts for cell division and primary metabolism had higher expression in the DZ, whereas the genes for photosynthesis, cell wall growth, and secondary metabolism were dramatically upregulated in the EZ. Overexpression of a MYB transcription factor, BmMYB83, promotes cell wall lignification in transgenic plants. BmMYB83 is specifically expressed in cells that may have lignin deposits, such as protoxylem vessels and fiber cells. Our results indicate that hormone gradient and transcriptome reprogramming, as well as specific expression of key genes such as BmMYB83, may lead to differentiation of cell growth in the bamboo internode.

Chitosan oligosaccharide modified liposomes enhance lung cancer delivery of paclitaxel.

Lung cancer is one of the leading causes of cancer-related death worldwide. Various therapeutic failed in the effective treatment of the lung cancer due to their limited accumulation and exposure in tumors. In order to promote the chemotherapeutics delivery to lung tumor, we introduced chitosan oligosaccharide (CSO) modification on the liposomes. CSO conjugated Pluronic P123 polymers with different CSO grafting amounts, called as CP50 and CP20, were synthesized and used to prepare CSO modified liposomes (CP50-LSs and CP20-LSs). CP50-LSs and CP20-LSs displayed significantly enhanced cellular uptake in A549 cells in vitro as well as superior tumor accumulation in vivo compared with non-CSO modified liposomes (P-LSs). This phenomenon was related to the increased affinity between CSO modified liposomes and tumor cells following massive adsorption of collagen, which was highly expressed in lung tumors. In the A549 tumor-bearing mouse model, intravenous injection of paclitaxel (PTX)-loaded CP50-LSs every 3 days for 21 days resulted in optimal antitumor therapeutic performance with an inhibition rate of 86.4%. These results reveal that CSO modification provides promising applicability for nanomedicine design in the lung cancer treatment.

First direct evidence of conservative foraging ecology of early Gigantopithecus blacki (~2 Ma) in Guangxi, southern China.

OBJECTIVES: Gigantopithecus blacki, the largest hominoid known, is one of the representative Pleistocene mammals in southern China and northern Southeast Asia. Here we investigate the feeding ecology of G. blacki in its core habitat (Guangxi, Southern China) during the early Early Pleistocene, which was the early period in its evolution. MATERIALS AND METHODS: The stable isotopic (C, O) analysis of tooth enamel of the fauna associated with G. blacki (n = 58), including the largest number of G. blacki teeth (n = 12) to date from the Liucheng Gigantopithecus Cave (~2 Ma), Guangxi, China, is undertaken. RESULTS: The δ13 C values of Liucheng fauna range from -12.9 to -19.0‰ with an average of -16.1 ± 1.3‰ (n = 58) and the δ18 O values range from -4.3 to -9.6‰ with an average of -6.9 ± 1.2‰ (n = 58). The δ13 C values of G. blacki range from -15.9‰ to -17.0‰ with an average of -16.5 ± 0.4‰ (n = 12), and the δ18 O values vary from -5.9‰ to -7.5‰ with an average of -6.6 ± 0.5‰ (n = 12). CONCLUSIONS: The isotopic data show Guangxi was characterized by closed C3 forest and humid climate in the early Early Pleistocene. Niche partitioning is found among G. blacki, Sinomastodon, Ailuropoda and Stegodon, the typical megafauna in South China in the early Early Pleistocene. This could be one of the important factors for them to co-exist until the Middle Pleistocene. Smallest isotopic variations of G. blacki are found compared with those of contemporary animals, indicating a conservative foraging ecology i.e., limited foraging area and/or narrow dietary flexibility. Furthermore, the more confined foraging ecology of G. blacki is also seen in comparison with fossil and extant large-bodied primates. However, the unique dietary pattern of G. blacki does not seem to have hindered its survival. The environment in Guangxi during the early Early Pleistocene offered the suitable conditions for G. blacki to become one of the typical species in the faunal assemblages.

[Discussion on traditional Chinese medicine properties of Myrtus communis leaves based on literature analysis and Chinese medicine theory].

Myrtus communis is a traditional medicinal aromatic plant in the Mediterranean. At present, the plant has been introduced and cultivated in the southern part of China, and it is mostly used for ornamental or cosmetic purposes. Based on literature analysis and the theory of Chinese medicine, we discussed the medicinal parts and properties of M. communis in this paper to provide a theoretical basis for exploring the medicinal value of M. communis and its compatibility with traditional Chinese medicines. Literatures were searched from Web of Science(core collection), PubMed, CNKI, VIP and Wanfang by using the set conditions as key words. Then the obtained literatures were screened and classified. Finally, a total of 376 articles were included, consisting of 44 reviews, 54 germplasm resources, 78 chemical researches, 48 studies on application, extraction, or quality, 18 human trials, 132 pharmacological studies, and 2 safety studies. Based on literature analysis and theories of Chinese medicine, the leaves of M. communis were finally selected as the medicinal part of Chinese medicine, and the traditional Chinese medicine properties of M. communis leaves were deduced as pungent, bitter, and cool. The channel tropisms of M. communis leaves included lung, liver, and large intestine, with functions of detoxifying, resolving a mass, and insecticide. It was used for mouth sores, vaginal itching, hemorrhoids and warts, etc.; appropriate amount shall be applied for external use, and the decoction form shall be used for washing the affected parts; 3-12 g equivalent product shall be used in decoction, and this herb shall be put into the decoction in a later stage. The clarification of the medicinal parts of M. communis, and the determination of the Chinese medicine properties of M. communis leaves would lay a theoretical foundation for its compatibility and application with Chinese medicines, and can do more contribution to the medical and healthcare industry in our country.

Risk factors for distal migration of biliary plastic stents and related duodenal injury.

BACKGROUND: The risk factors of duodenal injury from distal migrated biliary plastic stents remain uncertain. The aim of this study was to determine the risk factors of distal migration and its related duodenal injury in patients who underwent placement of a single biliary plastic stent for biliary strictures. METHODS: We retrospectively reviewed all patients with biliary strictures who underwent endoscopic placement of a single biliary plastic stent from January 2006 to October 2017. RESULTS: Two hundred forty-eight patients with 402 endoscopic retrograde cholangiopancreatography procedures were included. The incidence of distal migration was 6.2%. The frequency of duodenal injury was 2.2% in all cases and 36% in cases with distal migration. Benign biliary strictures (BBS), length of the stent above the proximal end of the stricture (> 2 cm), and duration of stent retention (< 3 months) were independently associated with distal migration (p = 0.018, p = 0.009, and p = 0.016, respectively). Duodenal injury occurred more commonly in cases with larger angle (≥ 30°) between the distal end of the stent and the centerline of the patient's body (p = 0.018) or in cases with stent retention < 3 months (p = 0.031). CONCLUSIONS: The risk factors of distal migration are BBS and the length of the stent above the proximal end of the stricture. The risk factor of duodenal injury due to distal migration is large angle (≥ 30°) between the distal end of the stent and the centerline of the patient's body. Distal migration and related duodenal injury are more likely to present during the early period after biliary stenting.

3D plotting in the preparation of newberyite, struvite, and brushite porous scaffolds: using magnesium oxide as a starting material.

Calcium phosphate (CaP)-containing materials, such as hydroxyapatite and brushite, are well studied bone grafting materials owing to their similar chemical compositions to the mineral phase of natural bone and kidney calculi. In recent studies, magnesium phosphate (MgP)-containing compounds, such as newberyite and struvite, have shown promise as alternatives to CaP. However, the different ways in degradation and release of Mg2+ and Ca2+ ions in vitro may affect the biocompatibility of CaP and MgP-containing compounds. In the present paper, newberyite, struvite, and brushite 3D porous structures were constructed by 3D-plotting combining with a two-step cementation process, using magnesium oxide (MgO) as a starting material. Briefly, 3D porous green bodies fabricated by 3D-plotting were soaked in (NH4)2HPO4 solution to form semi-manufactured 3D porous structures. These structures were then soaked in different phosphate solutions to translate the structures into newberyite, struvite, and brushite porous scaffolds. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectrometry (EDS) were used to characterize the phases, morphologies, and compositions of the 3D porous scaffolds. The porosity, compressive strength, in vitro degradation and cytotoxicity on MC3T3-E1 osteoblast cells were assessed as well. The results showed that extracts obtained from immersing scaffolds in alpha-modified essential media induced minimal cytotoxicity and the cells could be attached merely onto newberyite and brushite scaffolds. Newberyite and brushite scaffolds produced through our 3D-plotting and two-step cementation process showed the sustained in vitro degradation and excellent biocompatibility, which could be used as scaffolds for the bone tissue engineering.

Serum and salivary ferritin and Hepcidin levels in patients with chronic periodontitis and type 2 diabetes mellitus.

BACKGROUND: Iron disorder and abnormal expression of hepcidin play important roles in many diseases, but it is still unclear in chronic periodontitis (CP) and type 2 diabetes mellitus (T2DM). We aimed to assess ferritin and hepcidin levels in serum and saliva of CP patients with or without T2DM. METHODS: Serum and unstimulated whole saliva samples were collected from 88 participants, who were categorized into 4 groups based on the presence or absence of CP or T2DM. Demographics and general health parameters were recorded. Full-mouth clinical periodontal parameters including probing pocket depth, clinical attachment loss, bleeding index, and plaque index were recorded. Chemiluminescence microparticle immunoassay and enzyme-linked immunosorbent assay were used to detect ferritin and hepcidin concentrations, respectively, in serum and saliva. RESULTS: Serum ferritin and hepcidin levels in the CP and CP with T2DM groups were higher than in the control group (P < 0.05). Serum hepcidin and serum ferritin are linear correlated (P < 0.001). Serum hepcidin/ferritin values in the CP with T2DM group were significantly lower than those in the T2DM and control groups. Moreover, salivary ferritin levels in the CP and T2DM groups were higher than those in the control group (P < 0.05). There was positively correlation between salivary ferritin and serum ferritin (P = 0.017). Hepcidin concentrations were relatively low in saliva. CONCLUSIONS: These results suggest that iron overload and hepcidin inadequacy existed in CP with T2DM patients. Salivary ferritin might provide a reference for body iron load. TRIAL REGISTRATION: ChiCTR-ROC-17012780.

Exploring key cellular processes and candidate genes regulating the primary thickening growth of Moso underground shoots.

The primary thickening growth of Moso (Phyllostachys edulis) underground shoots largely determines the culm circumference. However, its developmental mechanisms remain largely unknown. Using an integrated anatomy, mathematics and genomics approach, we systematically studied cellular and molecular mechanisms underlying the growth of Moso underground shoots. We discovered that the growth displayed a spiral pattern and pith played an important role in promoting the primary thickening process of Moso underground shoots and driving the evolution of culms with different sizes among different bamboo species. Different with model plants, the shoot apical meristem (SAM) of Moso is composed of six layers of cells. Comparative transcriptome analysis identified a large number of genes related to the vascular tissue formation that were significantly upregulated in a thick wall variant with narrow pith cavity, mildly spiral growth, and flat and enlarged SAM, including those related to plant hormones and those involved in cell wall development. These results provide a systematic perspective on the primary thickening growth of Moso underground shoots, and support a plausible mechanism resulting in the narrow pith cavity, weak spiral growth but increased vascular bundle of the thick wall Moso.

Liquid Crystal Elastomer Actuators from Anisotropic Porous Polymer Template.

Controlling self-assembly behaviors of liquid crystals is a fundamental issue for designing them as intelligent actuators. Here, anisotropic porous polyvinylidene fluoride film is utilized as a template to induce homogeneous alignment of liquid crystals. The mechanism of liquid crystal alignment induced by anisotropic porous polyvinylidene fluoride film is illustrated based on the relationship between the alignment behavior of liquid crystals and surface microstructure of anisotropic polyvinylidene fluoride film. Liquid crystal elastomer actuators with fast responsiveness, large strain change, and reversible actuation behaviors are achieved by the photopolymerization of liquid crystal monomer in liquid crystal cells coated with anisotropic porous films.

[Application of quality by design in granulation process for ginkgo leaf tablet (⠣)： influence and control of raw materials' quality variation].

Raw materials' quality variation could affect the quality consistency of product and the clinical efficacy. In this paper, the high shear wet granulation (HSWG) process of the ginkgo leaf tablet was taken as the research object. Ginkgo biloba extracts and excipients microcrystalline cellulose collected from various sources and batches were used to simulate raw materials' quality variation. Real-time torque was recorded to analyze the viscosity of the wetting mass, and then by combining with physical fingerprint, the impact of physical quality variation of powders on granule properties could be investigated. Based on regime map thesis, whether the granules' nucleation mode was in mechanical dispersion regime was determined by calculating dimensionless parameters, which would lead to the unstable output in considerations of granule yield ratio and particle size distribution (PSD) curve. The orthogonal partial least square (OPLS) model was adopted to build the relationship between the micromeritic properties and the mediangranule size (D50) of Ginkgo biloba granules and then the critical material attributes (CMAs) were screened by variable importance in the projection (VIP) indexes. The results demonstrated that the properties of powders including hygroscopicity, angle of repose, Hausner ratio, Carr index, D10 and loss on drying affected the granule size. Besides, Ginkgo biloba granules were compressed into tablets. In view of tensile strength analysis, the raw materials' quality variation did not result in decrease of tensile strength of the ginkgo leaf tablets. The design space of critical quality attributes (CQAs) and the process design space which could cope with raw materials' quality variation were proved to be robust..

Transition-Metal-Free Biomolecule-Based Flexible Asymmetric Supercapacitors.

A transition-metal-free asymmetric supercapacitor (ASC) is successfully fabricated based on an earth-abundant biomass derived redox-active biomolecule, named lawsone. Such an ASC exhibits comparable or even higher energy densities than most of the recently reported transition-metal-based ASCs, and this green ASC generation from renewable resources is promising for addressing current issues of electronic hazard processing, high cost, and unsustainability.

Highly biocompatible nanofibrous microspheres self-assembled from chitin in NaOH/urea aqueous solution as cell carriers.

In this work, chitin microspheres (NCM) having a nanofibrous architecture were constructed using a "bottom-up" fabrication pathway. The chitin chains rapidly self-assembled into nanofibers in NaOH/urea aqueous solution by a thermally induced method and subsequently formed weaved microspheres. The diameter of the chitin nanofibers and the size of the NCM were tunable by controlling the temperature and the processing parameters to be in the range from 26 to 55 nm and 3 to 130 µm, respectively. As a result of the nanofibrous surface and the inherent biocompatibility of chitin, cells could adhere to the chitin microspheres and showed a high attachment efficiency, indicating the great potential of the NCM for 3D cell microcarriers.

Polyelectrolyte-single wall carbon nanotube composite as an effective cathode catalyst for air-cathode microbial fuel cells.

Polyelectrolyte-single wall carbon nanotube (SCNT) composites are prepared by a solution-based method and used as metal-free cathode catalysts for oxygen reduction reaction (ORR) in air-cathode microbial fuel cells (MFCs). In this study, two types of polyelectrolytes, polydiallyldimethylammonium chloride (PDDA) and poly[bis(2-chloroethyl)ether-alt-1,3-bis[3-(dimethylamino)propyl]urea] (PEPU) are applied to decorate the SCNTs and the resulting catalysts exhibit remarkable catalytic ability toward ORR in MFC applications. The enhanced catalytic ability could be attributed to the positively charged quaternary ammonium sites of polyelectrolytes, which increase the oxygen affinity of SCNTs and reduce activation energy in the oxygen reduction process. It is also found that PEPU-SCNT composite-based MFCs show efficient performance with maximum power density of 270.1 mW m(-2), comparable to MFCs with the benchmark Pt/C catalyst (375.3 mW m(-2)), while PDDA-SCNT composite-based MFCs produce 188.9 mW m(-2). These results indicate that PEPU-SCNT and PDDA-SCNT catalysts are promising candidates as metal-free cathode catalysts for ORR in MFCs and could facilitate MFC scaling up and commercialization.

Simple method to enhance the photostability of the fluorescence reporter R6G for prolonged single-molecule studies.

For fluorescence-based single-molecule studies, photobleaching of the dye reporter often limits the time window over which individual molecules can be followed. As such, many strategies, for example, using a cocktail of chemical reagents, have been developed to decrease the rate of photobleaching. Herein, we introduce a new and highly effective method to enhance the photostability of one of the commonly used fluorescent dyes, rhodamine 6G (R6G). We show that micrometer-sized polydimethylsiloxane (PDMS) wells, when the PDMS surface is properly treated, not only provide a confined environment for single-molecule detection but can also significantly increase the survival time of individual R6G molecules before photobleaching. Moreover, our results suggest, consistent with several previous studies, that R6G photobleaching involves a radical state.

Effects of microplastics on seed germination and seedling physiological characteristics of Spinacia oleracea under alkali stress.

Microplastics, a type of new environmental pollutant, have received much attention for their negative effects on organisms and environment. We examined the effects of microplastics on seed germination and seedling physiological characteristics of spinach (Spinacia oleracea) under alkali stress, taking polystyrene microspheres with a diameter of 100 nm (200, 400, 800, 1600 mg·L-1) as the microplastic treatment, and mixed NaHCO3 and Na2CO3 as alkaline salt solution (5, 10, 20, 40 mmol·L-1) according to the molar ratio of 1:1. The results showed that the presence of MPs (≥400 mg·L-1) inhibited seed germination, and that the length of roots and shoots increased at low while decreased at high concentration of MPs. Different concentrations of alkali alone could inhibit seed germination, root and bud elongation. With the increases of MPs concentration, SOD activity of spinach seedlings gradually decreased, while POD activity firstly increased and then decreased, and chlorophyll content increased at low concentration (200 mg·L-1) and decreased significantly at medium and high concentration (≥400 mg·L-1). Different alkali stresses reduced chlorophyll content of spinach seedlings, and the effects on SOD and POD were 'promotion at low concentration and inhibition at high'. In the treatments of microplastics (200, 800 mg·L-1) and alkali (5, 20 mmol·L-1) combined exposure, germination of spinach seeds was inhibited, and chlorophyll content decreased. The activities of SOD and POD in spinach seedlings were reduced under the combined exposure except the treatment of 200 mg·L-1 MPs and 5 mmol·L-1 alkali. Compared to the alkali stress, the combination of low concentration of MPs (200 mg·L-1) and alkali could improve germination rate, germination index, germination vigor and vigor index of seeds, and significantly promoted the elongation of roots and shoots, while the addition of high concentration of MPs (800 mg·L-1) reduced the germination rate, germination index, germination vigor and vigor index of seeds and inhibited the growth of roots and buds. The different concentrations of combined exposure inhibited the activities of SOD and POD and decreased the content of chlorophyll in spinach seedlings.

Divalent cation-induced cluster formation by polyphosphoinositides in model membranes.

Polyphosphoinositides (PPIs) and in particular phosphatidylinositol-(4,5)-bisphosphate (PI4,5P2), control many cellular events and bind with variable levels of specificity to hundreds of intracellular proteins in vitro. The much more restricted targeting of proteins to PPIs in cell membranes is thought to result in part from the formation of spatially distinct PIP2 pools, but the mechanisms that cause formation and maintenance of PIP2 clusters are still under debate. The hypothesis that PIP2 forms submicrometer-sized clusters in the membrane by electrostatic interactions with intracellular divalent cations is tested here using lipid monolayer and bilayer model membranes. Competitive binding between Ca(2+) and Mg(2+) to PIP2 is quantified by surface pressure measurements and analyzed by a Langmuir competitive adsorption model. The physical chemical differences among three PIP2 isomers are also investigated. Addition of Ca(2+) but not Mg(2+), Zn(2+), or polyamines to PIP2-containing monolayers induces surface pressure drops coincident with the formation of PIP2 clusters visualized by fluorescence, atomic force, and electron microscopy. Studies of bilayer membranes using steady-state probe-partitioning fluorescence resonance energy transfer (SP-FRET) and fluorescence correlation spectroscopy (FCS) also reveal divalent metal ion (Me(2+))-induced cluster formation or diffusion retardation, which follows the trend: Ca(2+) ≫ Mg(2+) > Zn(2+), and polyamines have minimal effects. These results suggest that divalent metal ions have substantial effects on PIP2 lateral organization at physiological concentrations, and local fluxes in their cytoplasmic levels can contribute to regulating protein-PIP2 interactions.