Key periodontal pathogens may mediate potential pathogenic relationships between periodontitis and crohn's disease.

BACKGROUND: Crohn's disease (CD)-associated periodontitis is common. However, the role of periodontal pathogens in the Coexistence of CD and periodontal disease remains unclear. METHODS: To investigate the potential relationship mediated by periodontal pathogens between periodontitis and CD, we collected salivary samples from healthy participants (H group, n = 12), patients with CD (Ch group, n = 10), patients with periodontitis (Ps group, n = 12), and patients with Coexistence of CD and periodontal disease (Cp group, n = 12) and analyzed them by 16 S rRNA sequencing. RESULTS: Patients with Coexistence of CD and periodontal disease had increased levels of Fusobacterium, Actinomyces, Leptotrichia, and Prevotella, which correlated with the severity of periodontitis. Conversely, the levels of Streptococcus, Neisseria, Haemophilus, and Gemella, which decreased in Coexistence of CD and periodontal disease, were negatively correlated with the severity of periodontitis. To further investigate the role of periodontal pathogens in CD development, representative periodontal pathogens causing periodontitis, Porphyromonas gingivalis and Fusobacterium nucleatum, were administered to mice. These pathogens migrate to, and colonize, the gut, accelerating CD progression and aggravating colitis, and even systemic inflammation. In vitro experiments using a Caco-2/periodontal pathogen coculture revealed that P. gingivalis and F. nucleatum increased intestinal permeability by directly disrupting the tight junctions of intestinal epithelial cells. CONCLUSION: Our findings strongly suggest that periodontal pathogens play a role in the relationship between periodontitis and CD. These results provide a basis for understanding the pathogenesis of Coexistence of CD and periodontal disease and may lead to the development of novel therapeutic strategies.

Coexistent Sjogren's syndrome and Birt-Hogg-Dube´ syndrome: a case report.

We report a rare case of Sjogren's syndrome complicated with Birt-Hogg-Dubé syndrome (BHDS) not previously mentioned in the literature. Further, there is insufficient evidence linking the two diseases. Here, we review existing diagnostic algorithms for diagnosing diffuse cystic lung disease and provide new insights. The patient initially complained of thirst and dry eyes for ten years, and gradually developed shortness of breath. After admission, physical examination showed five missing teeth, decreased respiratory sounds in both lower lungs, and Velcro rales. Computed tomography showed multiple thin-walled cystic lesions in both lungs. Initial xerophthalmia and labial gland biopsy seemed to reveal a pulmonary cystic change associated with Sjogren's syndrome. Before discharge, a rash suspected to indicate a fibrofollicular tumor in the neck was observed, and then FLCN variant has been found. The challenges how to clarify the diagnosis of DCLD causes are discussed.

Fast Fluorescence Titration Quantification of Plasmid DNA with DNA Attractive Magnetic Nanoparticles.

Fluorescence titration using magnetic nanoparticles (FTMN) was performed as a rapid, inexpensive, and simple method for quantifying the amount of fluorophore-intercalated plasmid DNA on these DNA attractive nanoparticles. Binding of the propidium iodide (PI)-intercalated DNA (PI/DNA) to polyethylenimine (PEI)-coated monodisperse iron oxide magnetic nanoparticles (PEI-MNs) was confirmed with transmission electron microscopy after the two species were mixed in water for less than a minute. The amount of DNA on PEI-MNs in aqueous solution, however, could not be easily determined using direct fluorescence measurements due to strong scattering by aggregated MNs, especially at high nanoparticle concentrations. Instead, fluorescence measurements were taken immediately after the solution of PI/DNA and PEI-MN mixtures was treated with a magnet to pull the PEI-MNs out of the solution. The detected fluorescence signal of the remaining free PI/DNA in the solution decreased as the concentration of PEI-MNs in the pre-treated solutions increased, resulting in a titration curve, which was used to determine the amount of DNA on MNs, the dissociation constant, and binding energy after the concentration of PEI-MNs was calibrated with microwave-plasma atomic emission spectroscopy. Quantitative polymerase chain reaction was used to understand the binding of DNA to MNs and to measure the amount of free PI/DNA in solution, and the results were similar to those obtained with the FTMN method.

A multifunctional near-infrared fluorescent sensing material based on core-shell upconversion nanoparticles@magnetic nanoparticles and molecularly imprinted polymers for detection of deltamethrin.

The construction of multifunctional sensors has attracted considerable attention due to their multifunctional properties, such as high sensitivity and rapid detection. Herein, near-infrared multifunctional fluorescent sensing materials based on core-shell upconversion nanoparticle@magnetic nanoparticle and molecularly imprinted polymers were synthesized for rapid detection of deltamethrin. The difunctional core-shell upconversion nanoparticle@magnetic nanoparticle was introduced as the optical signal and rapid separator. Firstly, the difunctional core-shell materials were prepared through solvothermal method. Then, molecularly imprinted polymers (MIPs) as recognition elements for deltamethrin were coated on the surface of upconversion nanoparticle@magnetic nanoparticle through polymerization. The structure and recognition characterizations of multifunctional fluorescent sensing materials were evaluated. Under optimal condition, the imprinting factor of sensing materials was 3.63, and the fluorescence intensity of sensing materials decreased linearly with increasing concentration of deltamethrin from 0.001 to 1 mg L-1 with a detection limit of 0.749 µg L-1, and a relative standard deviation of 3.10% was obtained with 5 mg L-1 deltamethrin. The sensing materials showed a high selectivity and were successfully utilized for the detection of deltamethrin in grapes and cabbages; the results showed that the recoveries for two samples obtained were 95.6-102% and 91.8-105%.

Epidermal Growth Factor Reverses the Inhibitory Effects of the Bisphosphonate, Zoledronic Acid, on Human Oral Keratinocytes and Human Vascular Endothelial Cells In Vitro via the Epidermal Growth Factor Receptor (EGFR)/Akt/Phosphoinositide 3-Kinase (PI3K) Signaling Pathway.

BACKGROUND Medication-related osteonecrosis of the jaw (MRONJ) is due to the direct effects of drug toxicity and the effects on angiogenesis. The aims of this study were to evaluate the effects of treatment with the bisphosphonate, zoledronic acid, on human oral keratinocytes (HOKs) and human umbilical vein endothelial cells (HUVECs) in vitro, and whether epidermal growth factor (EGF) could alter these effects. MATERIAL AND METHODS HOKs and HUVECs were incubated with zoledronic acid or EGF. Cell viability was assessed by the cell counting kit-8 (CCK-8), cell apoptosis was studied using Annexin-V conjugated to fluorescein isothiocyanate (FITC). Angiogenesis was studied by observing HUVEC tube formation and cell migrations using a transwell assay. A scratch wound assay investigated cell migration of HOKs. Western blot measured expression levels of phosphorylated epidermal growth factor receptor (EGFR), Akt, phosphoinositide 3-kinase (PI3K), the mechanistic target of rapamycin (mTOR), and endothelial nitric oxide synthase (eNOS). RESULTS Zoledronic acid treatment (5 µmol/L) significantly inhibited cell viability and cell migration of HOKs and HUVECs and angiogenesis of HUVECS (P<0.05); EGF partially reversed these effects (P<0.05). Zoledronic acid treatment of HOKs and HUVECs had no significant effects on apoptosis (P>0.05), but significantly reduced expression levels of p-EGFR, p-Akt, p-PI3K, p-mTOR), and p-eNOS (P<0.05); EGF partially reversed these effects and increased the expression levels (P<0.05). CONCLUSIONS EGF partially reversed the effects of the bisphosphonate, zoledronic acid, on HOKs and HUVECs in vitro via the EGFR/Akt/PI3K signaling pathway. Further studies are required to determine the effects of EGF on MRONJ including bisphosphonate-related osteonecrosis of the jaw.

The application of 3D-printed titanium mesh in maxillary tumor patients undergoing total maxillectomy.

OBJECTIVE: To evaluate the clinical outcomes of reconstruction of maxillary class III defect using 3D-printed titanium mesh. METHODS: Twelve patients with maxillary class III defect from April 2015 to December 2016 were retrospectively studied. A 3D individualized maxillary stereo model based on mirror images of the unaffected maxilla was obtained to fabricate an anatomically adapted titanium mesh using computer-assisted design and manufacture. The individual titanium mesh was inserted into the maxillary class III defect after total maxillectomy. The incidence of postoperative complications was evaluated. The postoperative orbital volume and protrusion degree of eye were measured. RESULTS: All patients were satisfied with their postoperative facial symmetry, without developing diplopia or endophthalmos. The postoperative orbital volumes were 26.41 ± 0.52 mL on the affected side and 26.55 ± 0.45 mL on the unaffected side. The postoperative protrusion degrees of affected and unaffected eyes were 16.21 ± 0.48 and 16.82 ± 0.79 mm, respectively. Titanium mesh exposure was observed in 2 patients and mild limitation of mouth opening was observed in 4 patients who underwent postoperative radiotherapy. CONCLUSION: Reconstruction of maxillary class III defect with 3D-printed titanium mesh can achieve successful clinical outcomes, which recovered orbital volume and protrusion degree of eye. Twelve patients with maxillary class III defect were satisfied with their postoperative facial symmetry, without developing diplopia or endophthalmos. We investigated that reconstruction of maxillary class III defect with 3D-printed titanium mesh can achieve successful clinical outcomes.

Enhanced phenolic compounds tolerance response of Clostridium beijerinckii NCIMB 8052 by inactivation of Cbei_3304.

BACKGROUND: Phenolic compounds generated in hydrolysis of lignocellulosic materials are major limiting factors for biological production of solvents by Clostridia, but it lacks the attention on the study of adaptation or resistance mechanisms in response to phenolic compounds. RESULTS: Gene Cbei_3304, encoding a hypothetical membrane transport protein, was analyzed by bioinformatic method. After insertional inactivation of the functionally uncertain gene Cbei_3304 in Clostridium beijerinckii NCIMB 8052, resulted in enhanced phenolic compounds tolerance. Compared to the parent strain C. beijerinckii NCIMB 8052, evaluation of toxicity showed the recombination stain C. beijerinckii 3304::int had a higher level of tolerance to four model phenolic compounds of lignocellulose-derived microbial inhibitory compounds. A comparative transcriptome analysis showed that the genes were involved in membrane transport proteins (ABC and MFS family) and were up-regulated expression after disrupting gene Cbei_3304. Additionally, the adaptation of C. beijerinckii NCIMB 8052 in response to non-detoxified hemicellulosic hydrolysate was improved by disrupting gene Cbei_3304. CONCLUSION: Toxicity evaluation of lignocellulose-derived phenolic compounds shows that Cbei_3304 plays a significant role in regulating toxicities tolerance for ABE fermentation by C. beijerinckii, and the adaptation of non-detoxified hemicellulosic hydrolysate is significantly improved after inactivation of Cbei_3304 in wild-type strain C. beijerinckii NCIMB 8052. It provided a potential strategy for generating high inhibitor tolerance strains for using lignocellulosic materials to produce solvents by clostridia in this study.

Efficient immobilization of AGE and NAL enzymes onto functional amino resin as recyclable and high-performance biocatalyst.

N-Acetylglucosamine-2-epimerase (AGE) and N-acetylneuraminic acid lyase (NAL) were immobilized for synthesis of N-acetylneuraminic acid (Neu5Ac) on three resins: Amberzyme oxirane resin (AOR), poly (styrene-co-DVB)-Br resin (PBR) and amino resin (AR). The loading capacity and immobilized enzyme activity showed that AR was the best carrier. Three methods of glutaraldehyde cross-linking were tested and simultaneous cross-linking and immobilization was demonstrated to be the best method. The functional properties of immobilized AGE and NAL were studied and compared to those of the free enzyme. The highest enzyme activities of free and immobilized AGE were obtained in 0.1 M potassium phosphate buffer at pH 7.5 and a temperature of 37 °C. Comparatively, the highest NAL activities were at pH 8.5. Meanwhile, an increase in K m (from 1.14 to 1.31 mg·mL-1 for AGE and from 1.05 to 1.25 mg·mL-1 for NAL) and a decrease in V max (from 177.53 to 106.37 µg·min-1 mL-1 for AGE and from 126.41 to 95.96 µg·min-1 mL-1 for NAL) were recorded after immobilization. The AR-glutaraldehyde-enzyme system exhibited better thermal stability than the free enzyme, and retained 72% of its initial activity even after eight repeated runs. The apparent activation energy (E a) of the free and immobilized AGE (NAL) was 117.14 kJ·mol-1 (124.21 kJ·mol-1) and 78.45 kJ·mol-1 (66.64 kJ·mol-1), respectively, implying that the catalytic efficiency of the immobilized enzyme was restricted by mass-transfer rather than kinetic limit. Subsequently, Neu5Ac production from GlcNAc using immobilized enzymes in one reactor was carried out resulting 101.45 g·L-1 of Neu5Ac and the highest conversion ratio of 82%. This method of enzyme immobilization may have a promising future for Neu5Ac production in industry.

Enhancement of cellulose degradation in freshwater sediments by a sediment microbial fuel cell.

OBJECTIVE: To demonstrate that an enhanced sediment microbial fuel cell (SMFC) system can accelerate the degradation of cellulose in fresh water sediments as the accumulation of cellulose in lake sediments may aggravate the lake marsh, increase organic matter content and result in rapid deterioration of water quality and damage the ecosystem. RESULTS: After 330 days the highest cellulose removal efficiency (72.7 ± 2.1 %) was achieved in the presence of a SMFC with a carbon nanotube decorated cathode, followed by a SMFC without the cathode decoration (64.4 ± 2.8 %). The lowest cellulose removal efficiency (47.9 ± 2.1 %) was in the absence of SMFC. The sediment characterization analysis confirmed that the carbon nanotube decorated cathode enhances the electron transfer rate in the SMFC and improves the dissolved organic matter oxidation rate. CONCLUSION: This study offers a relatively simple and promising new method for cellulose degradation in sediment.

Targeted Delivery of Quinoxaline-Based Semiconducting Polymers for Tumor Photothermal Therapy.

Photothermal therapy (PTT) holds great potential in the field of cancer treatment due to its high specificity and low invasiveness. However, the low conversion efficiency, inadequate tumor accumulation, and limited cellular uptake continue to impede PTT effectiveness in treating tumors. The present study focuses on the utilization of quinoxaline and its nanoparticles to develop an organic semiconducting photothermal agent (PAQI-BDTT) for tumor photothermal therapy. To achieve this, PAQI-BDTT was encapsulated within liposomes modified with cyclic Arg-Gly-Asp (cRGD) peptide targeting tumors (named T-BDTT-Lipo). Notably, T-BDTT-Lipo demonstrated a positive photothermal conversion efficiency of 74% when exposed to an 808 nm laser, along with NIR-II fluorescence imaging capabilities. The efficacy of T-BDTT-Lipo in tumor tissue accumulation and precise targeting of malignant cells has been confirmed through both in vitro and in vivo experiments guided by fluorescence imaging. Under single dose and 808 nm light irradiation, T-BDTT-Lipo generated local intracellular hyperthermia at the tumor site. The elevated temperature additionally exerted a significant inhibitory effect on tumor growth and recurrence, thereby extending the survival duration of mice harboring tumors. The therapeutic nanosystem (T-BDTT-Lipo) proposed in this work demonstrates the enormous potential of semiconducting photothermal agents in photothermal therapy, laying the foundation for the next clinical application.

The therapeutic effect and MR molecular imaging of FA-PEG-FePt/DDP nanoliposomes in AMF on ovarian cancer.

Purpose: This study aimed to construct targeting drug-loading nanocomposites (FA-FePt/DDP nanoliposomes) to explore their potential in ovarian cancer therapy and molecular magnetic resonance imaging (MMRI). Methods: FA-FePt-NPs were prepared by coupling folate (FA) with polyethylene-glycol (PEG)-coated ferroplatinum nanoparticles and characterized. Then cisplatin (DDP) was encapsulated in FA-FePt-NPs to synthesize FA-PEG-FePt/DDP nanoliposomes by thin film-ultrasonic method and high-speed stirring, of which MMRI potential, magnetothermal effect, and the other involved performance were analyzed. The therapeutic effect of FA-FePt/DDP nanoliposomes combined with magnetic fluid hyperthermia (MFH) on ovarian cancer in vitro and in vivo was evaluated. The expression levels of Bax and epithelial-mesenchymal transition related proteins were detected. The biosafety was also preliminarily observed. Results: The average diameter of FA-FePt-NPs was about 30 nm, FA-FePt/DDP nanoliposomes were about 70 nm in hydrated particle size, with drug slow-release and good cell-specific targeted uptake. In an alternating magnetic field (AMF), FA-FePt/DDP nanoliposomes could rapidly reach the ideal tumor hyperthermia temperature (42~44 °C). MRI scan showed that FA-FePt-NPs and FA-FePt/DDP nanoliposomes both could suppress the T2 signal, indicating a good potential for MMRI. The in vitro and in vivo experiments showed that FA-FePt/DDP-NPs in AMF could effectively inhibit the growth of ovarian cancer by inhibiting cancer cell proliferation, invasion, and migration, and inducing cancer cell apoptosis, much better than that of the other individual therapies; molecularly, E-cadherin and Bax proteins in ovarian cancer cells and tissues were significantly increased, while N-cadherin, Vimentin, and Bcl-2 proteins were inhibited, effectively inhibiting the malignant progression of ovarian cancer. In addition, no significant pathological injury and dysfunction was observed in major visceras. Conclusion: We successfully synthesized FA-FePt/DDP nanoliposomes and confirmed their good thermochemotherapeutic effect in AMF and MMRI potential on ovarian cancer, with no obvious side effects, providing a favorable strategy of integrated targeting therapy and diagnosis for ovarian cancer.

Polyethylene microplastic modulates lettuce root exudates and induces oxidative damage under prolonged hydroponic exposure.

Root exudates are pivotal in plant stress responses, however, the impact of microplastics (MPs) on their release and characteristics remains poorly understood. This study delves into the effects of 0.05 % and 0.1 % (w/w) additions of polyethylene (PE) MPs on the growth and physiological properties of lettuce (Lactuca sativa L.) following 28 days of exposure. The release characteristics of root exudates were assessed using UV-vis and 3D-EEM. The results indicated that PE increased leaf number but did not significantly affect other agronomic traits or pigment contents. Notably, 0.05 % PE increased the total root length and surface area compared to the 0.1 % addition, while a non-significant trend towards decreased root activity was observed with PE MPs. PE MPs with 0.1 % addition notably reduced the DOC concentration in root exudates by 37.5 %, while 0.05 % PE had no impact on DOC and DON concentrations. PE addition increased the SUVA254, SUVA260, and SUVA280 values of root exudates, with the most pronounced effect seen in the 0.05 % PE treatment. This suggests an increase of aromaticity and hydrophobic components induced by PE addition. Fluorescence Regional Integration (FRI) analysis of 3D-EEM revealed that aromatic proteins (region I and II) were dominant in root exudates, with a slight increase in fulvic acid-like substances (region III) under 0.1 % PE addition. Moreover, prolonged PE exposure induced ROS damage in lettuce leaves, evidenced by a significant increase in content and production rate of O2·-. The decrease in CAT and POD activities may account for the lettuce's response to environmental stress, potentially surpassing its tolerance threshold or undergoing adaptive regulation. These findings underscore the potential risk of prolonged exposure to PE MPs on lettuce growth.

Functionalized sampling swabs array-based portable ATP bioluminescence sensor with on-site enrichment and high specificity for live Salmonella detection.

Live food-borne pathogens, featured with rapid proliferative capacity and high pathogenicity, pose an emerging food safety and public health crisis. The high-sensitivity detection of pathogens is particularly imperative yet remains challenging. This work developed a functionalized nylon swab array with enhanced affinity for Salmonella typhimurium (S.T.) for high-specificity ATP bioluminescence-based S.T. detection. In brief, the nylon swabs (NyS) were turned to N-methylation nylon (NyS-OH) by reacting with formaldehyde, and NyS-OH were further converted to NyS-CA by reacting with carboxylic groups of citric acid (CA) and EDC/NHS solution, for altering the NyS surface energy to favor biomodification. The antibody-immobilized nylon swab (MNyS-Ab) was ready for S.T.-specific adsorption. Three prepared MNyS-Ab were installed on a stirrer to form an MNyS-Ab array, allowing for on-site enrichment of S.T. through absorptive extraction. The enriched S.T. was quantified by measuring the bioluminescence of ATP released from cell lysis utilizing a portable ATP bioluminescence sensor. The bioassay demonstrated a detectable range of 102-107 CFU mL-1 with a detection limit (LOD) of 8 CFU/mL within 35 min. The signal of single MNyS-Ab swabs was 500 times stronger than the direct detection of 106 CFU/mL S.T. The MNyS-Ab array exhibited a 100-fold increase in extraction level compared to a single MNyS. This combination of a portable bioluminescent sensor and modified nylon swab array offers a novel strategy for point-of-care testing of live S.T. strains. It holds promise for high-sensitivity measurements of other pathogens and viruses.

Cationic liposomes overcome neutralizing antibodies and enhance reovirus efficacy in ovarian cancer.

Reovirus (Reo) has shown promising potential in specifically killing tumor cells, and offering new possibilities for ovarian cancer (OC) treatment. However, neutralizing antibodies in the ascites from OC patients greatly limit the further application of Reo. In this study, we employed cationic liposomes (Lipo) to deliver Reo, significantly enhancing its ability to enter OC cells and its effectiveness in killing these cells under ascitic conditions. Pre-treatment with the MßCD inhibitor notably decreased Reo-mediated tumor cell death, indicating that Lipo primarily enables Reo's cellular uptake through caveolin-mediated endocytosis. Our results demonstrate that Lipo effectively facilitates the entry of Reo into the cytoplasm and triggers cell apoptosis. The above findings provide a new strategy to overcome the obstacle of neutralizing antibodies in the clinical application of Reo.

Optimize lettuce washing methods to reduce the risk of microplastics ingestion: The evidence from microplastics residues on the surface of lettuce leaves and in the lettuce washing wastewater.

Airborne microplastics have been identified as an emerging contaminant that can adhere to the surface of leafy vegetables, and if not completely removed by washing, there is a high risk that human consumption of these plastics may cause harm to humans. In this study, we simulated atmospheric pollution by spraying microplastic particles (MPs) with particle sizes of 100 nm and 500 nm to determine whether MPs particles would adhere to the lettuce surface and whether different common cleaning methods (water rinsing, ultrasonic vibration cleaning, and edible detergent cleaning) would be effective in removing MPs from the leaf surfaces. We scanned the leaf surface with a laser confocal microscope and examined the wash water with a flow cytometer and found that simple rinsing was not effective in removing plastic particles from lettuce leaves. In comparison, ultrasonic vibratory cleaning showed a better efficiency, 4 times higher than more MPs being washed from the leaves. The most effective method was detergent washing, with the washing efficiency increased by 6.9 times. Ultrasonic vibrations can partially break the chemical bonds between MPs and plant surfaces, and detergents' surfactants can enhance MPs' hydrophilicity. MPs with a particle size of 100 nm were more difficult to clean than those with a particle size of 500 nm. This finding has important implications for the interaction of MPs contamination with vegetables and the cleaning of vegetables.

Bacteria-Inspired Aqueous-in-Aqueous Compartmentalization by In Situ Interfacial Biomineralization.

Compartmentalization is essential for living cells to orchestrate their biological processes with controlled external influences. Thus, compartmentalization has been a constant theme for cell-mimicking materials. Despite recent advances in engineering compartmentalized materials as synthetic cells and organelles, it remains difficult to produce robust and well-ordered compartments with secluded environments in aqueous surroundings. Nature creates hierarchically ordered compartmentalized materials by utilizing bio-catalyzed mineralization, inspired by which, mechanically robust all-aqueous compartments are developed by engineering a mild biomimetic mineralization at aqueous/aqueous interfaces. The enzyme-induced biomineralization generates a layer of densely-packed particles, acting as an armor to enclose aqueous interiors. This strategy of in situ bio-synthesized compartments is different from current strategies, where compartments are constructed by randomly adsorbed particles at interface, leading to inadequately controlled properties of compartments. To demonstrate the robustness and adaptiveness of the in situ bio-synthesized all-aqueous compartments, these are utilized as drug delivery materials by sequestering protein drugs at their aqueous interiors and releasing when exposing to gastric environments. The study provides new ways to fabricate compartmentalized materials with well-defined properties, unlocking routes to the next generation of self-assembled materials and structures by integrating aqueous two-phase systems with biomineralization.

Do microplastics affect sulfamethoxazole sorption in soil? Experiments on polymers, ionic strength and fulvic acid.

Microplastics (MPs) and sulfamethoxazole (SMX) are emerging contaminants that are ubiquitous in the soil environment. In this study, we investigated MPs polymer type and soil environmental factor effects on SMX adsorption behavior in the soil system. Our results showed that MPs dosage affected the soil particles' SMX adsorption rate and capacity (Qe). Adding 1 % polystyrene (PS) increased the SMX adsorption rate significantly. The value of K1, which represented the adsorption rate, increased from 0.569 h-1 to 1.019 h-1. However, the addition of MPs reduced the soil's SMX equilibrium adsorption capacity slightly. Moreover, increasing salinity strength enhanced SMX adsorption capacity by MPs significantly. However, increasing calcium ions concentration decreased SMX adsorption in the MPs amended soil due to multivalent cationic bridging and competitive adsorption mechanisms. In addition, we observed that fulvic acid addition inhibited SMX adsorption. This study suggests that the addition of MPs reduced the adsorption of SMX in the soil slightly due to dilution effect. Meanwhile, changes in environmental factors also affected the adsorption behavior of SMX in soil amended with MPs.

A comb-brushing-type green soybean pod harvesting equipment: Design and experiment.

To solve the problem of low efficiency of manual harvesting of green soybeans and lack of adaptable harvesters, in this study, a brushing-type green soybean harvester was designed. The comb-brushing type green soybean pod harvesting equipment is composed of a front-mounted separation drum, a full-width material delivery mechanism, a negative pressure cleaning system, and a stalk-pod separation system. Based on the operation requirements of the front-mounted brushing-type detachment drum, the drum parameters, parameters of comb arrangement, and structural parameters of the comb, the force analysis in detachment was performed. By taking the pod detachment rate and damage rate as the response indexes, the rotational speed of the drum, the travel speed of the device, and teeth distance as influencing factors, a three-factor five-level orthogonal rotary combination test was carried out by the software Design-Expert. By establishing mathematical regression models for various influencing factors and evaluation indicators, conducting variance analysis and significance analysis on the response indicators of each factor, the optimal parameters were obtained at a rotational speed of teeth of 397.36 rpm/min, minimum axial teeth distance of 4.8 mm and travel speed of the device of 0.5 m/s. Field test results showed that, under the optimal parameter combination, the pod detachment rate was 94%, the damage rate was 3.04%, the harvesting efficiency was greater than 0.187 hm2/h, and impurity content was less than 7.8%, all of which met the design and usage requirements. The research results can provide a reference for the design of soybean harvesters.

Enhanced photothermal therapy performance of D-A conjugated polymers based on [1,2,3]triazolo[4,5-g]quinoxaline by manipulating molecular motion.

Donor-acceptor (D-A) conjugated polymers can favor the nonradiative thermal dissipation process, due to the formation of an intramolecular charge transfer (ICT) state resulting from the electron cloud delocalization of the HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital). Thus, to realize a high extinction coefficient and excellent photothermal conversion ability for a single photothermal agent, donor-acceptor type conjugated polymers PBDT-QTz and PCDT-QTz, comprising a new electron-deficient unit 2-(2-decyltetradecyl)-6,7-dimethyl-2H-[1,2,3]triazolo [4,5-g] quinoxaline (QTz) as the acceptor and 4,8-di(thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene (BDT) or 4H-cyclopenta[2,1-b:3,4-b'] dithiophene (CDT) as the donor, are designed and synthesized by manipulating intramolecular motion. The high extinction coefficient of 28.5 L g-1 cm-1 at 850 nm and the optimal photothermal conversion efficiency of 64.3% under an 808 nm laser are achieved based on PBDT-QTz. Consequently, PBDT-QTz nanoparticles can be successfully used for both in vitro and in vivo experiments. After intravenous administration and 808 nm laser irradiation, HeLa tumor-bearing mice achieve complete tumor remission without recurrence. The results provide an efficient photothermal agent by manipulating molecular motion.