The effect of haemostatic agents on early healing of the extraction socket.

AIM: This study aims to explore the effect of two commercially available haemostatic agents (i.e., collagen sponge and oxide cellulose) on early healing of the extraction socket. MATERIAL AND METHODS: In a murine model, bilateral maxillary first molars were extracted and the sockets were filled with or without haemostatic agents. Histology, histomorphometry and immunostaining assays were performed on samples harvested on postextraction day 1, 3, 7 and 14. In vitro studies were also designed to investigate the effect of agents on the dynamics of pH and viability of cells. RESULTS: Early socket healing was delayed by both agents but with different patterns. The migration of cells was impeded by oxide cellulose on postextraction day 1 compared with the collagen and the control group. The proliferation and osteogenic differentiation of cells were delayed by both materials. Moreover, apoptosis of periodontal ligament cells was present in the haemostatic agent groups. These effects are attributed to the compression to periodontal ligament by both agents, the acidic niche caused by oxide cellulose, and the intense foreign body reaction and inflammatory response caused by the agents. CONCLUSIONS: The placement of haemostatic agents delay the early extraction socket healing via different biological mechanism.

[Effects of sintered bone modified with surface mineralization/P24 peptide composite biomaterial on the adhesion, proliferation and osteodifferentiation of MC3T3-E1 cells].

In the present research, the effects of sintered bone modified with surface mineralization/P24 peptide composite biomaterials on the adhesion, proliferation and osteodifferentiation of MC3T3-E1 cells were investigated. The experiments were divided into three groups due to biomaterials used: Group A (composite materials of sintered bone modified with surface mineralization and P24, a peptide of bone morphogenetic protein-2); Group B (sintered bone modified with surface mineralization) and Group C (sintered bone only). The three groups were observed by scanning electron microscopy (SEM) before the experiments, respectively. Then MC3T3-E1 cells were cultured on the surfaces of the three kinds of material, respectively. The cell adhesion rate was assessed by precipitation method. The proliferative ability of MC3T3-E1 cells were measured with MTT assay. And the ALP staining and measurement of alkaline phosphatase (ALP) activity were performed to assess the differentiation of cells into osteoblasts. The SEM results showed that the materials in the three groups retained the natural pore structure and the pore sizes were in the range between 200-850 µm. The adhesive ratio measurements and MTT assay suggested that adhesion and proliferation of MC3T3-E1 cells in Group A were much higher than those in Group B and Group C (P < 0.05). The ALP staining and ALP activity of MC3T3-E1 cells in Group A were significantly higher than those in Group B and Group C (P < 0.05). The sintered bone modified with surface mineralization/P24 composite material was confirmed to improve the adhesion rate and proliferation and osteodifferentiation of MC3T3-E1 cells, and maintained their morphology.

Mgp High-Expressing MSCs Orchestrate the Osteoimmune Microenvironment of Collagen/Nanohydroxyapatite-Mediated Bone Regeneration.

Activating autologous stem cells after the implantation of biomaterials is an important process to initiate bone regeneration. Although several studies have demonstrated the mechanism of biomaterial-mediated bone regeneration, a comprehensive single-cell level transcriptomic map revealing the influence of biomaterials on regulating the temporal and spatial expression patterns of mesenchymal stem cells (MSCs) is still lacking. Herein, the osteoimmune microenvironment is depicted around the classical collagen/nanohydroxyapatite-based bone repair materials via combining analysis of single-cell RNA sequencing and spatial transcriptomics. A group of functional MSCs with high expression of matrix Gla protein (Mgp) is identified, which may serve as a pioneer subpopulation involved in bone repair. Remarkably, these Mgp high-expressing MSCs (MgphiMSCs) exhibit efficient osteogenic differentiation potential and orchestrate the osteoimmune microenvironment around implanted biomaterials, rewiring the polarization and osteoclastic differentiation of macrophages through the Mdk/Lrp1 ligand-receptor pair. The inhibition of Mdk/Lrp1 activates the pro-inflammatory programs of macrophages and osteoclastogenesis. Meanwhile, multiple immune-cell subsets also exhibit close crosstalk between MgphiMSCs via the secreted phosphoprotein 1 (SPP1) signaling pathway. These cellular profiles and interactions characterized in this study can broaden the understanding of the functional MSC subpopulations at the early stage of biomaterial-mediated bone regeneration and provide the basis for materials-designed strategies that target osteoimmune modulation.

Genesis of osteoclasts on calcium phosphate ceramics and their role in material-induced bone formation.

Innate immune responses play important roles in material-induced bone formation and such roles were further explored in the current study with an emphasis on M2 macrophages and osteoclastogenesis. With the presence of M-CSF and RANKL, M0 macrophages from FVB mouse bone marrow-derived monocytes (BMMs) fused to osteoclasts with both M2 marker and osteoclast marker at day 5, and such osteoclast formation at day 5 was enhanced when the cells were treated with IL-4 at day 3. With IL-4 treatment alone for 24 h, M0 polarized into M2 macrophages. Conditioned medium of M2 macrophages enhanced osteogenic differentiation of MC3T3-E1 (pre-osteoblasts) while osteoclast conditioned medium enhanced osteogenic differentiation of CRL-12424 (osteogenic precursors). TCPs (a typical osteoinductive material) supported M2 macrophage polarization at day 4 and osteoclast formation at day 5, while TCPb (a typical non-osteoinductive material) was less effective. Moreover, osteoclasts formed on TCPs produced osteogenic factors including S1P, Wnt10B and BMP-6, resulting osteogenic differentiation of CRL-12424 cells. Similar to in vitro testing, TCPs favored M2 macrophage polarization followed by the formation of osteoclasts in vivo, as compared to TCPb. The overall data provided evidence of a coupling between M2 macrophages, osteoclasts and material-induced bone formation: osteoclasts formed from M2 macrophages secrete osteogenic cytokines to induce osteogenic differentiation of osteogenic precursor cells to finally form bone. The current findings outlined a biological mechanism of material-induced bone formation and further rationalized the use of osteoinductive materials for bone regeneration. STATEMENT OF SIGNIFICANCE: This paper provides evidence for finding out the relationship between M2 macrophages, osteoclasts and osteogenesis in material-induced bone formation. It suggested that osteoinductive materials enhanced macrophage polarization to M2 macrophages which fuses to osteoclasts, osteoclasts subsequently secret osteogenic cytokines to differentiate finally osteogenic precursors to form bone in osteoinductive materials. The data supports scientifically the superiority of osteoinductive materials for bone regeneration in clinics.

Neuro-bone tissue engineering: emerging mechanisms, potential strategies, and current challenges.

The skeleton is a highly innervated organ in which nerve fibers interact with various skeletal cells. Peripheral nerve endings release neurogenic factors and sense skeletal signals, which mediate bone metabolism and skeletal pain. In recent years, bone tissue engineering has increasingly focused on the effects of the nervous system on bone regeneration. Simultaneous regeneration of bone and nerves through the use of materials or by the enhancement of endogenous neurogenic repair signals has been proven to promote functional bone regeneration. Additionally, emerging information on the mechanisms of skeletal interoception and the central nervous system regulation of bone homeostasis provide an opportunity for advancing biomaterials. However, comprehensive reviews of this topic are lacking. Therefore, this review provides an overview of the relationship between nerves and bone regeneration, focusing on tissue engineering applications. We discuss novel regulatory mechanisms and explore innovative approaches based on nerve-bone interactions for bone regeneration. Finally, the challenges and future prospects of this field are briefly discussed.

[Study on preparation and physicochemical properties of surface modified sintered bone].

The aim of this study is to investigate a new method for preparing a biomimetic bone material-surface modified sintered bovine cancellous bone, and to improve its bioactivity as a tissue engineering bone. The prepared sintered bovine cancellous bones with the same size were randomly divided into two groups, immersing in 1 and 1. 5 times simulated body fluid (SBF), respectively. The three time periods of soak time were 7, 14, and 21 days. After sintered bone was dried, the surface morphology of sintered bone and surface mineralization composition were observed under scanning electron microscopy (SEM). By comparing the effect of surface modification of sintered bone materials, we chose the most ideal material and studied its pore size, the rate of the porosity, the compress and bend intensity. And then the material and the sintered bone material without surface modification were compared. The study indicated that sintered bone material immersed in SBF (1.5 times) for 14 days showed the best effect of surface modification, retaining the original physico-chemical properties of sintered bone.

Biomimetic porous scaffolds containing decellularized small intestinal submucosa and Sr2+/Fe3+co-doped hydroxyapatite accelerate angiogenesis/osteogenesis for bone regeneration.

The design of bone scaffolds is predominately aimed to well reproduce the natural bony environment by imitating the architecture/composition of host bone. Such biomimetic biomaterials are gaining increasing attention and acknowledged quite promising for bone tissue engineering. Herein, novel biomimetic bone scaffolds containing decellularized small intestinal submucosa matrix (SIS-ECM) and Sr2+/Fe3+co-doped hydroxyapatite (SrFeHA) are fabricated for the first time by the sophisticated self-assembled mineralization procedure, followed by cross-linking and lyophilization post-treatments. The results indicate the constructed SIS/SrFeHA scaffolds are characterized by highly porous structures, rough microsurface and improved mechanical strength, as well as efficient releasing of bioactive Sr2+/Fe3+and ECM components. These favorable physico-chemical properties endow SIS/SrFeHA scaffolds with an architectural/componential biomimetic bony environment which appears to be highly beneficial for inducing angiogenesis/osteogenesis bothin vitroandin vivo. In particular, the cellular functionality and bioactivity of endotheliocytes/osteoblasts are significantly enhanced by SIS/SrFeHA scaffolds, and the cranial defects model further verifies the potent ability of SIS/SrFeHA to acceleratein vivovascularization and bone regeneration following implantation. In this view these results highlight the considerable angiogenesis/osteogenesis potential of biomimetic porous SIS/SrFeHA scaffolds for inducing bone regeneration and thus may afford a new promising alternative for bone tissue engineering.

Supramolecular Peptide Nanofiber Hydrogels for Bone Tissue Engineering: From Multihierarchical Fabrications to Comprehensive Applications.

Bone tissue engineering is becoming an ideal strategy to replace autologous bone grafts for surgical bone repair, but the multihierarchical complexity of natural bone is still difficult to emulate due to the lack of suitable biomaterials. Supramolecular peptide nanofiber hydrogels (SPNHs) are emerging biomaterials because of their inherent biocompatibility, satisfied biodegradability, high purity, facile functionalization, and tunable mechanical properties. This review initially focuses on the multihierarchical fabrications by SPNHs to emulate natural bony extracellular matrix. Structurally, supramolecular peptides based on distinctive building blocks can assemble into nanofiber hydrogels, which can be used as nanomorphology-mimetic scaffolds for tissue engineering. Biochemically, bioactive motifs and bioactive factors can be covalently tethered or physically absorbed to SPNHs to endow various functions depending on physiological and pharmacological requirements. Mechanically, four strategies are summarized to optimize the biophysical microenvironment of SPNHs for bone regeneration. Furthermore, comprehensive applications about SPNHs for bone tissue engineering are reviewed. The biomaterials can be directly used in the form of injectable hydrogels or composite nanoscaffolds, or they can be used to construct engineered bone grafts by bioprinting or bioreactors. Finally, continuing challenges and outlook are discussed.

A dual-responsive polydopamine-modified hydroxybutyl chitosan hydrogel for sequential regulation of bone regeneration.

Delayed inflammatory reaction and poor osteogenesis are the two main causes of failure for bone-defect healing. Accordingly, in the present study, a dual-responsive hydrogel composite was successfully fabricated in which near-infrared (NIR)-light-responsive polydopamine-coated magnesium-calcium carbonate microspheres are incorporated into a thermo-responsive hydroxybutyl chitosan hydrogel to provide sequential delivery of the anti-inflammatory drug aspirin and osteogenic bone morphogenetic protein 2 (BMP-2). By initially releasing aspirin rapidly, the hydrogel composite efficiently ameliorates early-stage inflammatory reaction and promotes transition to the regenerative phase. Then, the hydrogel composite allows NIR-light-responsive release of BMP-2, which maximizes its osteoinductive effects. Using an SD rat calvaria-defect model, the sequential and controllable release achieved by the hydrogel is demonstrated to promote new-bone formation. Thus, the current study provides an efficient alternative strategy for developing multifunctional therapeutic biomaterials for bone tissue engineering.

Surface modified small intestinal submucosa membrane manipulates sequential immunomodulation coupled with enhanced angio- and osteogenesis towards ameliorative guided bone regeneration.

Constructing bioactive guided bone regeneration (GBR) membranes that possess biological multifunctionality is becoming increasingly attractive and promising to meet higher requirements for bone healing. Given the biological responses following implantation, GBR process originates from an early inflammation-driven reaction adjacent to implanted membranes surface. However, to date there is relatively little attention paid to the critical immunoregulatory functions in traditionally designed GBR membranes. Herein, for the first time, we manipulate immunomodulatory properties of the widely-used native small intestinal submucosa (SIS) membrane by incorporating strontium-substituted nanohydroxyapatite coatings and/or IFN-γ to its surface. In vitro results reveal the obtained novel membrane SIS/SrHA/IFN-γ not only promote functions of endothelial cells and osteoblasts directly, but also energetically mediate a sequential M1-M2 macrophages transition to concurrently facilitate angiogenesis and osteogenesis. Moreover, in vivo outcomes of subcutaneous implantation and cranial defects repair further confirm its superior capacity to promote vascularization and in situ bone regeneration than pristine SIS through immunomodulation. These results demonstrate a sequential immunomodulatory strategy renders modified SIS membranes acting as a robust immunomodulator rather than a traditional barrier to significantly ameliorate in vivo GBR outcomes and hence provide important implications that may facilitate concerns on immunomodulatory properties for future GBR developments.

Serial cellular events in bone formation initiated by calcium phosphate ceramics.

To better understand the biological mechanisms triggered by osteoinductive materials in vivo, we evaluated the timeline of cellular responses to osteoinductive materials subcutaneously implanted in FVB mice. More F4/80-positive macrophages were present in osteoinductive tri-CaP ceramic (TCP) with submicron surface topography (TCPs) than non-osteoinductive TCP with micron surface topography (TCPb) at week 1. Moreover, TCPs (but not TCPb) significantly enhanced osteoclastogenesis, and induced macrophages to polarize from M1 to M2 in the first week. The time sequence and relevance of macrophages and osteoclasts responses involved in bone formation was then evaluated through peri-implant injection of specific chemicals in mice implanted with osteoinductive TCPs. Day-1 injection of clodronate liposomes (LipClod) depleted macrophages, inhibited macrophage polarization to M2, blocked osteoclastogenesis and bone formation, while the day-6 injection was less effective. Anti-RANKL antibody (aRANKL) did not affect macrophage colonization but inhibited osteoclastogenesis. Injection of aRANKL before week 2 aborted bone formation in TCPs, while injection at week 4 partially inhibited bone formation. The overall data show that following ectopic implantation, osteoinductive materials allow macrophage colonization in hours to days, macrophage polarization to M2 in days (within 7 days), osteoclastogenesis in weeks (e.g. in 2 weeks) and bone formation thereafter (after 4 weeks). The serial cellular events verified herein bring a new insight on material-induced bone formation and pave the way to further explore the mechanisms triggered by osteoinductive materials. STATEMENT OF SIGNIFICANCE: A series of key cellular events triggered by osteoinductive calcium phosphate ceramic was revealed: macrophages colonized within hours to days, polarization of M2 macrophages occurred within 7 days, osteoclastogenesis mainly occurred in weeks (e.g. in 2 weeks) and bone formation finally arose thereafter (after 4 weeks). Moreover, such time sequence of cellular events was confirmed with specific chemicals (clodronate liposomes and anti-RANKL antibody). The findings verified herein bring a new insight on material-induced bone formation and pave the way to further explore the mechanisms triggered by osteoinductive materials.

Biocompatibility of KLD-12 peptide hydrogel as a scaffold in tissue engineering of intervertebral discs in rabbits.

KLD-12 peptide with a sequence of AcN-KLDLKLDLKLDL-CNH(2) was synthesized and its biocompatibility was assessed in animals. Rabbit MSCs were cultured in the hydrogel for 2 weeks. Live cells were counted by using Calcein-AM/PI fluorescence staining. MTT was employed to assess the viability of MSCs cultured in KLD-12 peptide solution of 0.01%, 0.03%, and 0.05%. Hemolysis test, skin irritation test and implantation test were conducted to evaluate its biocompatibility with host tissues. Our results demonstrated that the MSCs in hydrogel grew well and maintained round shape. Cell survival rate was 92.15% (mean: 92.15%+/-1.17%) at the 7th day and there was no difference in survival rate between day 7 and day 14. Cell proliferation test showed that the A value of the KLD-12 solutions was not significantly different from that of control groups (complete culture media) (P>0.05) at the 24th and 48th h. The hemolysis rate of KLD-12 solution was 0.112%. Skin irritation test showed that the skin injected with KLD-12 solution remained normal and the score of skin irritation was 0. The histological examination with HE staining exhibited that the skin layers were clear and there was no infiltration with neutrophilic granulocytes and lymphocytes. It is concluded that KLD-12 peptide hydrogel had a good biocompatibility with host rabbit and MSCs, and KLD-12 peptide hydrogel can provide an appropriate microenvironment for MSCs.

[Neural stem cells induced by neotype three-dimensional polypeptide-based self-assembled hydrogel].

The amphiphilic polypeptide (PA) was self-assembled into three-dimensional (3-D) porous complex of hydrogel and cells with the addition of NSCs-containing DMEM/F12. Cell differentiation in the surface and that within hydrogel were described. Cells harvested from the cerebral cortex of neonatal mice were triturated and cultivated in serum-free media. 1wt% PA was added into same volume of DMEM/F12 with cell concentration of 1 x 10(5)/ml and self-supported into 3-D hydrogel-cell composition; cells suspended within hydrogel being maintained (Experiment group, EG). lwt% PA was self-assembled into two-dimensional (2-D) hydrogel films triggered by addition of DMEM/F12, and then 1 x 10(5)/ml NSCs was seeded in the surface of films (Control group, CG). Cells in EG and CG were incubated in serum-free media for two weeks and stained with immunocytochemistry methods. TEM showed that the hydrogel derived from PA was composed of network nanofibers with their diameter ranging from 3 to 5 nm and length ranging from 100 nm to 1. 5 microm. Above 50% of cells obtained were Nestin positive cells. LSCM observations demonstrated that above 90% of cells survived two days after incubation within hydrogel, and were differentiated into NF and GFAP positive cells one week after incubation, their differentiation rates were 50% +/- 4.2% and 20% +/- 2.8% respectively; however, cells in CG were also differentiated into NF and GFAP positive cells, their differentiation rates were only 40% +/- 3.4% and 31% +/- 2.3% separately. Peptide-based hydrogel was able to provide 3-D environments for cell survival and induce primarily the differentiation of NSCs into neurons. Our data indicated that peptide-directed self-assembly of hydrogels was useful and it served as the neotype nerve tissue engineering scaffolds.

Creation of Bony Microenvironment with Extracellular Matrix Doped-Bioactive Ceramics to Enhance Osteoblast Behavior and Delivery of Aspartic Acid-Modified BMP-2 Peptides.

INTRODUCTION: Decellularized matrix from porcine small intestinal submucosa (SIS) endows scaffolds with an ECM-like surface, which enhances stem cell self-renewal, proliferation, and differentiation. Mesoporous bioactive glass (MBG) is extensively recognized as an excellent bio-ceramic for fabricating bone grafts. MATERIALS AND METHODS: In the current study, SIS was doped on an MBG scaffold (MBG/SIS) using polyurethane foam templating and polydopamine chemistry method. To mimic the bony environment of a natural bone matrix, an ECM-inspired delivery system was constructed by coupling the BMP2-related peptide P28 to a heparinized MBG/SIS scaffold (MBG/SIS-H-P28). The release of P28 from MBG/SIS-H-P28 and its effects on the proliferation, viability, and osteogenic differentiation of bone marrow stromal stem cells were investigated in vitro and in vivo. RESULTS: Our research indicated that the novel tissue-derived ECM scaffold MBG/SIS has a hierarchical and interconnected porous architecture, and superior biomechanical properties. MBG/SIS-H-P28 released P28 in a controlled manner, with the long-term release time of 40 d. The results of in vitro experiments showed improvements in cell proliferation, cell viability, alkaline phosphatase activity, and mRNA expression levels of osteogenesis-related genes (Runx-2, OCN, OPN, and ALP) compared to those of MBG/SIS or MBG/SIS-P28 and MBG/SIS-H-P28. The in vivo results demonstrated that MBG/SIS-H-P28 scaffolds evidently increased bone formation in rat calvarial critical-sized defect compared to that in controls. CONCLUSION: MBG/SIS-H-P28 scaffolds show potential as ideal platforms for delivery of P28 and for providing a bony environment for bone regeneration.

The synergetic effect of bioactive molecule-loaded electrospun core-shell fibres for reconstruction of critical-sized calvarial bone defect-The effect of synergetic release on bone Formation.

OBJECTIVES: Bone regeneration is a complex process modulated by multiple growth factors and hormones during long regeneration period; thus, designing biomaterials with the capacity to deliver multiple bioactive molecules and obtain sustained release has gained an increasing popularity in recent years. This study is aimed to evaluate the effect of a novel core-shell electrospun fibre loaded with dexamethasone (DEX) and bone morphogenetic protein-2 (BMP-2) on bone regeneration. MATERIALS AND METHODS: The core-shell electrospun fibres were fabricated by coaxial electrospinning technology, which were composed of poly-D, L-lactide (PLA) shell and poly (ethylene glycol) (PEG) core embedded with BMP-2 and DEX-loaded micelles. Morphology, hydrophilicity, gradation, release profile of BMP-2 and DEX, and cytological behaviour on bone marrow mesenchymal stem cells (BMSCs) were characterized. Furthermore, the effect on bone regeneration was evaluated via critical-sized calvarial defect model. RESULTS: The electrospun fibres were featured by the core-shell fibrous architecture and a suitable degradation rate. The sustained release of DEX and BMP-2 was up to 562 hours. The osteogenic gene expression and calcium deposition of BMSCs were significantly enhanced, indicating the osteoinduction capacity of electrospun fibres. This core-shell fibre could accelerate repair of calvarial defects in vivo via synergistic effect. CONCLUSIONS: This core-shell electrospun fibre loaded with DEX and BMP-2 can act synergistically to enhance bone regeneration, which stands as a strong potential candidate for repairing bone defects.

Combined use of RGD-peptide modified PLGA and TGF-beta1 gene transfected MSCs to improve cell biobehaviors in vitro.

In order to improve the surface properties of PLGA polymer for a better material/cell interface to modulate the cells behaviors, we prepared a novel three-block copolymer, PLGA-[ASP-PEG], and immobilized an RGD-containing peptide, Gly-Arg-Gly-Asp-Ser-Pro-Cys (GRGDSPC) on the surface of it. Transforming growth factor-beta1 (TGF-beta1) was transfected into bone marrow stromal cells (MSCs) employed as seeded cells. Cell adhesion, spreading, proliferation and differentiation on this material were investigated. The results showed that the cell adhesive ratio on RGD-modified materials was higher than on un-modified materials (P<0.05). The extent of cell spreading was also wider on RGD-modified materials than on un-modified materials. Cell proliferation indices of transfected MSCs were increased as compared with the un-transfected MSCs (P<0.05). The ALP activities in the MSCs cultured with RGD-modified materials were higher than on un-modified materials after 14 days (P<0.05), and those in transfected MSCs were higher than in un-transfected MSCs (P<0.05). It was suggested that the combined use of RGD-modification and TGF-beta gene transfection could improve the interaction of biomaterial and cells.

[Hydrogel self-supported from the neotype of amphiphilic peptide].

The neotype of amphiphilic oligopeptide (C16 H31 O-AAAGGGGDDIKVAV) was synthesized. The framework of three-dimensional and porous hydrogel self-assembly from the amphiphilic oligopeptide on different conditions was explored. The peptide, whose molecular weight (MW) and purity were detected by Mass Spectrometer (MS) and High Performance Liquid Chromatograph (HPLC) respectively, was synthesized in solid phase methods. Peptide was dissolved in 0.1 mol/L Sodium Hydroxide (NaOH) solution. 200 microl of 10, 2, 1, 0.5 wt% peptide solutions, which were prepared respectively, were added into the same volume of DMEM/F12, or placed into the vapor of 10 mol/L Hydrochloric acid (HCl), or were used to coat in the surface of coverslip and set into the baking oven at 37 degrees C. The self-assembly hydrogel was examined with transmission electron microscope (TEM) and scanning electron microscope (SEM). MS showed that peptide MW was 1438.31. HPLC testified that the peptide purity was 96%. The peptide solution was self-supported into hydrogel triggered with DMEM/F12 in few seconds, or the thin hydrogel after two hours in the vapor of 10 mol/L HCl, or not hydrogel in the baking oven at 37 degrees C. SEM showed that the hydrogel self-assembly from 10 wt% peptide solution was composed of nanofibers that ranked in layers where there were thick voids. TEM showed that the hydrogel self-assembly from 2, 1, 0.5 wt% peptide solution comprised woven network nanofibers, that the nanofibers of hydrogel self-supported from 1 wt% peptide solution varied from 3 to 6 nm in diameter and 100 nm to 1.5 um in length, that the nanofibers of hydrogel self-supported from 2 wt% peptide solution ranked closely, and there were big voids within the thin nanofibers of hydrogel self-supported from 0.5 wt% peptide solution. The amphiphilic oligopeptide was synthesized and self-organized successfully into porous hydrogel characterized as "intelligent" tissue engineering scaffolds containing the bioactive ligand, which was triggered by DMEM/F12.

Thermally triggered injectable chitosan/silk fibroin/bioactive glass nanoparticle hydrogels for in-situ bone formation in rat calvarial bone defects.

Copper-containing bioactive glass nanoparticles (Cu-BG NPs) with designed compositions and sizes were synthesized and incorporated into chitosan (CH)/silk fibroin (SF)/glycerophosphate (GP) composites to prepare injectable hydrogels for cell-free bone repair. The resulting Cu-BG/CH/SF/GP gels were found to exhibit well-defined injectability and to undergo rapid gelation at physiological temperature and pH. They were highly porous and showed the ability to administer Si, Ca and Cu ions at their respective safe doses in a sustained and controlled manner. In vitro studies revealed that the gels supported the growth of seeded MC3T3-E1 and human umbilical vein endothelial cells, and effectively induced them toward osteogenesis and angiogenesis, respectively. In vivo bone repair based on a critical-size rat calvarial bone defect model demonstrated that the optimal Cu-BG/CH/SF/GP gel was able to fully restore the bone defect with formation of vascularized bone tissue and mineralized collagen deposition during a treatment period of 8 weeks without utilization of any cells and/or growth factors. The results suggest that the presently developed Cu-BG/CH/SF/GP composite hydrogels have great potential and translation ability for bone regeneration owing to their thermo-sensitive properties, cell-free bioactivity, and cost-effectiveness. STATEMENT OF SIGNIFICANCE: Hydrogels loaded with cells and/or growth factors exhibit potential in bone repair. However, they have been facing obstacles related to the clinic translation. Here, a novel type of hydrogel system consisting of copper-containing bioactive glass nanoparticles and chitosan/silk fibroin composite was developed. These gels showed injectability and thermally triggered in situ gelation properties and were able to administer the release of ions at safe but effective doses in a controlled manner while inducing the seeded cells toward osteogenesis and angiogenesis. The optimal gel showed the ability to fully repair critical-size rat calvarial bone defects without involving time consuming cell processing and/or the use of expensive growth factors, confirming that this novel hydrogel system has great potential for translation to the clinic.

Repair of rabbit femoral defects with a novel BMP2-derived oligopeptide P24.

In this study, the bioactivity of a novel BMP2-derived oligopeptide P24 was investigated by using the model of rabbit femoral defect after loaded in the biodegradable poly (lactic acid / glycolic acid / asparagic acid-co-polyethylene glycol) (PLGA-[ASP-PEG]). A 1.5-cm unilateral segmental bone defect was created in the left femoral diaphysis in each of the 30 new zealand white rabbits. The defects of 18 legs filled with BMP2-derived peptide P24 combined with PLGA-[ASP-PEG] scaffold serves as the experimental group, and the defects in the rest 12 rabbits filled with (PLGA-[ASP-PEG]) without P24 as control group. The bone-repairing capability in the target region of the two group was grossly, radiologically, histopathologically and biomechanically evaluated 4, 8 and 12 weeks after the operation. Our results showed that in each group, primary healing of incision was achieved in the two groups. Radiographically, in experimental group, defects were filled with induced callus within 8 weeks, and a cortical bone-like structure was observed in some animals at the 12th week. According to the standardized stage of bone defect repair, 9 (64.28%) achieved grade-4 healing. In contrast, little bone formation was seen in the defects even 12 weeks after the operation, and 5 (62.50%) had grade 0 healing in this group. Histologically, tissue engineering material was mostly absorbed and cartilage was found around implants in the experimental group at the 4th week; 8 weeks after operation, the engineering material was completely absorbed, and formation of woven bone was observed and typical trabecular bone structure could be seen. In control group, 8 weeks after operation, the defect was filled with fibrous tissues, and no bone-like structure was observed. Statistical analysis showed very significant difference in biomechanical indicators between the two groups (P<0.05). It is concluded that new oligopeptide P24 can induce excellent bone regeneration and promote bone repair.

[Arg-Gly-Asp-containing peptide combining with the biomimetic and modified PLGA-(ASP-PEG)].

Arg-Gly-Asp-(RGD) containing peptide characterized as the non-viral gene vector was synthesized to modify the surface of PLGA-(ASP-PEG). The Peptide (K16-GRGDSPC) was synthesized. PLGA-(ASP-PEG) was executed into chips A, B and C. Chip C was regarded as control. Chips A and B reacted with the cross-linker, then Chip A reacted with peptide. Mass spectrometry (MS) and high performance liquid chromatography (HPLC) detected the molecular weight and the purity of peptide. Sulphur in the surface of materials was detected by X-ray photoelectron spectrometry (XPS). The peptide content in the residual solution was detected by Spectrometer. HPLC showed the peptide purity was 94.13%; MS showed the molecular weight was 2741.26. XPS revealed the binding energy of the sulphur in reacted Chip A was 164 eV in reacted Chip B, 164eV and 162 eV; the ratios of carbon to sulphur in reacted Chip A and B were 99.746:0.1014 and 99.574:0.4255, respectively. There was no sulphur in Chip C. The optical density value (OD) of the resident solution was 0.069. The peptide density of reacted Chip A was 0.04 mg/mm2. The peptide was manufactured and linked to the surface of the biomimetic PLGA-(ASP-PEG) with the cross-linker.