Electrochemical aptasensor based on electrodeposited poly(3,4-ethylenedioxythiophene)-graphene oxide coupled with Au@Pt nanocrystals for the detection of 17ß-estradiol.

An electrochemical aptasensor is reported for the sensitive and specific monitoring of 17ß-estradiol (E2) based on the modification of electrodeposited poly(3,4-ethylenedioxythiophene) (PEDOT)-graphene oxide (GO) coupled with Au@Pt nanocrystals (Au@Pt). With excellent conductivity, chemical stability and active sites, the PEDOT-GO nanocomposite film was firstly in situ polymerized on the glassy carbon electrode by cyclic voltammetry. Subsequently, one-step synthesized Au@Pt were decorated on the conductive polymer, providing a platform for immobilizing the aptamer and enhancing the detecting sensitivity. With the addition of E2, since the interfacial electron transfer process was retarded by the E2-aptamer complex, the differential pulse voltammetry signal decreased gradually. Under optimum conditions, the calibration curve of E2 exhibited a linear range between 0.1 pM and 1 nM, with a low detection limit (S/N = 3) of 0.08 pM. The developed aptasensor showed admiring selectivity, stability, and reproducibility. It was tested in human serum, lake water and tap water samples after low-cost and simple pretreatment. Consequently, the developed platform could provide a new design thought for ultrasensitive detection of E2 in clinical and environmental samples.

Anticancer drug detection using a highly sensitive molecularly imprinted electrochemical sensor based on an electropolymerized microporous metal organic framework.

A simple and highly sensitive approach for the detection of the anti-neoplastic drug gemcitabine is presented, based on a one-step electropolymerized molecularly imprinted microporous-metal-organic-framework. The sensitive layer was prepared by electropolymerization of the aniline moieties of p-aminothiophenol- gold nanoparticles on the surface of gold electrodes tethered with p-aminothiophenol, in the presence of gemcitabine as a template molecule. Experimental parameters that control the performance of the sensor were investigated and optimized. Under optimal conditions a calibration curve was obtained in the linear range from 3.8 fM to 38 nM with a limit of detection of 3 fM. The obtained imprinted sensor has the advantages of easy manufacture, high sensitivity and selectivity and good reproducibility. Furthermore the feasibility of the proposed technique has been investigated on spiked serum samples and infusion solution containing gemcitabine.