Ozone therapy effect in medication-related osteonecrosis of the jaw as prevention or treatment: microtomographic, confocal laser microscopy and histomorphometric analysis.

OBJECTIVE: This study aimed to evaluate the efficacy of ozone therapy in the preoperative (prevention) and/or postoperative (treatment) of MRONJ. MATERIAL AND METHODS: Forty male Wistar rats were caudally treated with zoledronic acid (ZOL) and to ozone therapy before extraction (prevention, POG), after extraction (treatment, TOG), or both (prevention and treatment, TPOG), and treated with saline (SAL). The animals received intramuscular fluorochrome (calcein and alizarin), and 28 days postoperatively, they were euthanized, and the tissues were subjected to microtomographic computed tomography (microCT), LASER confocal, and histomorphometric analyses. RESULTS: Micro-CT showed a higher bone volume fraction average in all groups than that in the ZOL group (P < 0.001), the ZOL group showed high porosity (P = 0.03), and trabecular separation was greater in the TOG group than in the POG group (P < 0.05). The mineral apposition rate of the POG group was high (20.46 ± 6.31) (P < 0.001), followed by the TOG group (20.32 ± 7.4). The TOG group presented the highest mean newly formed bone area (68.322 ± 25.296) compared with the ZOL group (P < 0.05), followed by the SAL group (66.039 ± 28.379) and ZOL groups (60.856 ± 28.425). CONCLUSIONS: Ozone therapy modulated alveolar bone repair in animals treated with ZOL, mainly after surgery trauma, leading to bone formation as healing tissue. CLINICAL RELEVANCE: Osteonecrosis has been a challenge in dentistry, and owing to the lack of a consensus regarding therapy, studies presenting new therapies are important, and ozone has been one of the therapies explored empirically.

Photobiomodulation Therapy Improves Postoperative Pain and Edema in Third Molar Surgeries: A Randomized, Comparative, Double-Blind, and Prospective Clinical Trial.

PURPOSE: Laser light has biological effects that can modulate inflammatory processes. Thus, this study aimed to evaluate the effects of photobiomodulation (PBM) therapy on pain, edema, and trismus after the extraction of retained third molars. METHODS: A split-mouth, double-blind, randomized clinical trial (RCT) was conducted in 13 patients with similar bilateral third molars who received intraoral application PBM therapy at 4 points with a diode laser at 810 nm wavelength, 6 J (100 mW, 60 seconds/point) on 1 side (the PBM side); and laser irradiation simulation on the other side (SHAM side). The pain was assessed through visual analog scale (VAS) at 0, 12, 24, 48, and 72 hours, number of analgesic-relief (NAR), and mean time of first analgesic use; edema, through VAS, and linear facial measurements at 0, 24, 48, and 72 hours; and trismus, through the mouth opening measurements at 0, 24, 48, and 72 hours. The repeated-measures analysis was applied to assess the effect of the treatment, followed by Tukey's post hoc test for multiple comparisons (P < .05). RESULTS: Thirteen patients (61.77% male and 38.63% female) with age of 24.16 ± 2.06 participated in this research. VAS showed that PBM controlled pain better (7.56 ± 6.25) than SHAM (32.25 ± 22.78) at 24 hours (P < .001) and 48 hours (19.47 ± 9.27 and 39.87 ± 4.21, respectively) (P = .011). VAS also showed that PBM controlled edema better (19.7 ± 13.27) than SHAM (32.38 ± 15.28) at 24 hours (P = .037) and 48 hours (19.47 ± 13.11 and 39.87 ± 22.77, respectively) (P = .002). CONCLUSION: The PBM therapy in this study resulted in pain and edema reduction after third molar surgery and may be considered as adjuvant therapy after the surgical procedure.

Mechanical Comparison of Four Different Types of Osteosynthesis in a 11-mm Advancement Le Fort I Osteotomy.

OBJECTIVE: This study aimed to evaluate 4 methods of osteosynthesis in the maxilla after a linear advance of 11 mm. METHODOLOGY: Le Fort I osteotomies were performed on 24 resin models and different osteosynthesis were applied in the anterior region. Group I received Lindorf plates; group II, modified Lindorf plates; group III, inverted "T" plates; and group IV, "L" plates. All groups received "L" plates in the posterior region. Analysis were performed through universal mechanical testing machine with an axial linear load until 5-mm displacement. The data obtained about the force and the amount of deformation were computed, thus the energy required for displacement and stiffness was calculated. Statistical analysis was performed using 2-way analysis (Shapiro-Wilk, followed by Holm-Sidak) (P  < 0.05). RESULTS: Groups I and II showed greater resistance to displacement (P < 0.05) than the other groups. The largest amount of maximum force exerted for the 5-mm displacement was in group II (91.73 N), followed by group I (87.46 N), presenting the best values in comparison with the other groups (P < 0.001). Group III had less stiffness (P < 0.001) than the other groups. CONCLUSIONS: The use of preclinical methodologies to verify the mechanical stability of fixation models allows a prediction in the choice of greater resistance systems. The fixation type with greater resistance to deformation was achieved with modified Linford plates followed by Linford plates in the anterior region and plate "L" bilaterally in the posterior region.

Post-legalization Consumption of Cannabis at Massachusetts General Hospital Dental Group.

AIM: The aim of this study was to evaluate the profile of patients undergoing dental treatment in relation to cannabis use. MATERIALS AND METHODS: A comprehensive questionnaire was used to address the type of cannabis preparations, route of intake, frequency of usage, and potential reasoning for use (recreational vs medical use) of patients from the MGH Dental Group. RESULTS: Seventy-six adult patients completed the survey. Sixty-one percent of the participants were female, with the majority (59%) of the participants being ≥51 years or older. Twelve of the 76 participants (16%) were 18-30 years old. The remaining 19 patients (25%) who participated in the study were 31-50 years old. The sample included participants who were predominately non-Hispanic (63 patients, 83%) and White (59 patients, 78%). The majority of patients either had their first use of cannabis prior to 18 years of age (36%) or did not respond to this question (34%) at all. The predominant age at consistent cannabis use was 18-30 years (13%). The most common method of cannabis intake in the preceding year for participants was smoking, followed by ingesting, using cannabidiol (CBD), and vaping (least common). Recreational cannabis use was reported in 47% of the participants vs 28% of participants who reported cannabis intake for medical use. CONCLUSION: This preliminary study characterized the profile of patients undergoing dental treatment in relation to marijuana use. Diminishing restraints to cannabis use may affect the dental profession. CLINICAL SIGNIFICANCE: It is important for dentists to understand cannabis-related oral health conditions to provide customized patient treatments.

Accuracy evaluation of computer-guided implant surgery associated with prototyped surgical guides.

STATEMENT OF PROBLEM: Correct implant placement by means of a pretreatment planning software program is still subject to deviations between the planned and achieved implant positions. Inaccuracy at this level may have drastic consequences, including neurovascular trauma. Further data are therefore needed to evaluate the accuracy of such computer-guided implant planning software programs. PURPOSE: The purpose of this clinical study was to evaluate the accuracy of computer-guided implant surgery associated with prototyped surgical guides. MATERIAL AND METHODS: Cone beam computed tomography (CBCT) scans were made of the participants with a tomographic guide to merge anatomic and prosthetic data. This allowed virtual planning with a prosthetically guided approach respecting the anatomy of the participant. A prototyped surgical guide was then fabricated from the virtual plan, determining the intrasurgical position of the implants. Flapless guided implant surgery was carried out according to the manufacturer's instructions. A second CBCT was made 30 days after the surgery, to enable overlapping of the data from before and after the implant placement. The angular, coronal, central, and apical deviations of the placed implants were measured and compared with those virtually planned. The data were submitted to descriptive statistic and intraclass correlation coefficient (ICC), analysis of variance, and the Student t test (α=.05). RESULTS: A total of 61 implants were analyzed. The mean angular deviation was 2.04 degrees. The mean coronal, central, and apical linear deviations were 0.68 mm, 0.72 mm, and 0.82 mm, respectively. No statistically significant difference was found between the virtual and the real position of the implants inserted. A tendency toward a greater absolute error was observed in the mandible than in the maxilla in terms of angular (P=.047), central (P=.043), and coronal error (P=.031). CONCLUSIONS: Flapless computer-guided implant surgery with virtual planning had some angular and linear deviations; nevertheless, this technique should be acceptably safe and accurate.

Strategy for Optimizing Airway Volume With Genioglossal Advancement Using Cutting Guide in the Treatment of Obstructive Sleep Apnea.

The genioglossus advancement muscle is a technique used to treat obstructive sleep apnea and depends on the precise location of the muscle insertion into the geniotubercle. The aim of this article was to present a case report about a 38-year-old male patient with obstructive sleep apnea even after undergoing uvulopalatopharyngoplasty and mentoplasty. A maxillo-mandibular advancement and genioglossus was proposed, for this a virtual planning of the surgical guide was done using a specialized software. The great advantage is to reduce the osteotomy by focusing precisely on the insertion of the muscle. The cutting guide facilitated the surgical procedure in all aspects and brought safety.

Rodents as an animal model for studying tooth extraction-related medication-related osteonecrosis of the jaw: assessment of outcomes.

OBJECTIVE: To assess the outcomes of several rodent animal models for studying tooth extraction-related medication-related osteonecrosis of the jaw (MRONJ). DESIGN: After a search of the databases, 2004 articles were located, and 118 corroborated the inclusion factors (in vivo studies in rodents evaluating tooth extraction as a risk factor for the development of MRONJ). RESULTS: Numerous studies attempting to establish an optimal protocol to induce MRONJ were found. Zoledronic acid (ZA) was the most used drug, followed by alendronate (ALN). Even when ZA did not lead to the development of MRONJ, its effect compromised the homeostasis of the bone and soft tissue. The association of other risk factors (dexamethasone, diabetes, and tooth-related inflammatory dental disease) besides tooth extraction also played a role in the development of MRONJ. In addition, studies demonstrated a relationship between cumulative dose and MRONJ. CONCLUSIONS: Both ZA and ALN can lead to MRONJ in rodents when equivalent human doses (in osteoporosis or cancer treatment) are used. Local oral risk factors and tooth-related inflammatory dental disease increase the incidence of MRONJ in a tooth extraction-related rodent model.

The influence of electrical high-speed rotation on mandibular third molar surgeries: a prospective, randomized, split-mouth clinical and radiographic study.

The aim of this split-mouth randomized clinical trial was to evaluate the clinical outcomes (operative time, edema, trismus, and pain), the immediate histological effects, the alveolar repair (2 and 4 months), and the quality of life after the extraction of impacted third molars using high-speed pneumatic and electrical rotation. Sixteen patients underwent extraction of the two mandibular third molars with a minimum interval of 15 days. On one side of the participant's mouth, high-speed pneumatic rotation was used (Control Group-CG) while for the other side, high-speed electrical rotation was used (Study Group-SG). Statistical analysis included ANOVA repeated measures and Pearson correlations. SG group showed: shorter operative time (p = 0.019), less pain (p = 0.034), swelling (p < 0.001) and trismus (p = 0.025) on the 1st postoperative day; less pain (p = 0.034) and trismus (p = 0.010) on the 3rd postoperative day; less trismus (p = 0.032) on the 7th postoperative day; and better quality of life (p = 0.007). No differences were observed for peripheral bone damage or bone density of alveolar repair at 2 and 4 months between groups. Electric high-speed rotation provided better postoperative clinical parameters of pain, edema and trismus when compared with pneumatic high-speed rotation for mandibular third molar surgery.Trial registration: Brazilian Registry of Clinical Trials registration number RBR-4xyqhqm ( https://ensaiosclinicos.gov.br/rg/RBR-4xyqhqm ).

Comparative study of the effect of different temperatures on bovine bone used for bone repair of critical calvaria defects in rats.

To evaluate the osteoconductive potential of inorganic biomaterials of bovine origin submitted to different temperatures in the bone repair of critical defects in rat calvaria. Forty-eight rats were divided into four groups according to the material used to fill the defect: control group (GC), the defect was filled only with blood clot (n = 12); GBO, defect filled with Bio-Oss®, deproteinzed at 300°C (n = 12); GOX, defect filled with Inorganic GenOx®, deproteinzed from 850 to 1200°C (n = 12) and G700, defect filled with Inorganic GenOx 700, deproteinzed at 700°C (n = 12). In each animal's calvaria, a trephine bur with 5 mm internal diameter was used to produce a 6 mm-diameter central defect. Gen Derm® resorbable bovine membrane was superimposed over all defects. Subsequently, animals were euthanized at 30 and 60 days after surgery. The pieces were sent for histological and histometric analysis to evaluate the following variables: bone neoformation, presence of biomaterial, mononuclear and polymorphonuclear leukocytes, presence of other tissues (granulation and medullary) and maturation of collagen fibers. The most representative group for bone neoformation was GC. At 30 days, there was a higher mean of mature bone tissue (75.8). At 60 days, there was no statistical difference between the GC (64.9), GBO (32.9), GOX (45.3), and G700 (26.6) groups. GBO presented the highest amount of biomaterial after 30 days (115.9) and 60 days (118.5). All bovine biomaterials were biocompatible and osteoconductive. GOX promoted the best bone repair of the studied materials.

Photo-crosslinked GelMA loaded with dental pulp stem cells and VEGF to repair critical-sized soft tissue defects in rats.

BACKGROUND: Tissue engineering of skin and mucosa is essential for the esthetic and functional reconstruction of individuals disfigured by trauma, resection surgery, or severe burns while overcoming the limited amount of autograft and donor site morbidity. PURPOSE: We aimed to determine whether a combination of Gelatin-methacryloyl (GelMA) hydrogel scaffold alone or loaded with either dental pulp stem cells (DPSCs) and/or vascular endothelial growth factor (VEGF) could improve skin wound healing in rats. MATERIALS AND METHODS: Four 10 mm full-thickness skin defects were created on the dorsum of 15 Sprague-Dawley rats. The wounds were treated with GelMA alone, GelMA+DPSCs, or GelMA+DPSCs+VEGF. Unprotected wounds were used as controls. Animals were euthanized at 1-, 2-, and 4 weeks post-surgery, and the healing wounds were harvested for clinical, histological, and RT-PCR analysis. RESULTS: No signs of clinical inflammation were observed among all groups. Few and sparse mononuclear inflammatory cells were observed in GelMA+DPSCs and GelMA+DPSCs+VEGF groups at 2 weeks, with complete epithelialization of the wounds. At 4 weeks, the epidermis in GelMA+DPSCs and GelMA+DPSCs+VEGF groups was indistinguishable from the empty defect and GelMA groups. The decrease in cellularity and increase in density of collagen fibers were observed over time in both GelMA+DPSCs and GelMA+DPSCs+VEGF groups but were more evident in the GelMA+DPSCs+VEGF group. The GelMA+DPSCs+VEGF group showed a higher expression of the KER 10 gene at all time points compared with the other groups. Expression of Col1 A1 and TGFß-1 were not statistically different over time neither among the groups. CONCLUSION: GelMA scaffolds loaded with DPSCs, and VEGF accelerated the re-epithelialization of skin wounds.

Evaluation of oral implant survival rate in postmenopausal women with osteopenia/osteoporosis. A retrospective pilot study.

BACKGROUND: Implant placement is a common part of dental rehabilitation in older individuals. The role of diminished bone mineral density on the healing of dental implants remains to be elucidated. OBJECTIVE: The aim of this study was to assess the implant survival rate in postmenopausal women with osteopenia/osteoporosis. METHODS: A retrospective cohort study was conducted of postmenopausal women treated with dental implants and stratified into two groups: those receiving antiresorptive therapy (W ≥ 50 years S) or those not receiving treatment (W ≥ 50 years U). The predictor variable was osteopenia/osteoporosis treatment. The outcome variable was implant failure rate at stage two uncovering. Other study variables included: age, implant location, and bone graft placement. T-test, chi-square test, and univariate and multivariate logistic regression were computed. A p-value<0.05 was considered statistically significant. RESULTS: The sample was composed of 93 W ≥ 50 years U (197 implants) and 114 W ≥ 50 years S (189 implants). W ≥ 50 years U showed a statistically higher implant failure rate with chi-square testing compared to W ≥ 50 years S (p=0.022). However, univariate, and multivariate logistic regression between age, location, bone grafting, and implant failure did not demonstrate significant associations. CONCLUSION: Both groups integrated dental implants successfully, with a low failure rate. Implant location, bone grafting, and osteopenia/osteoporosis treatment did not significantly affect osseointegration at uncovering.

Adjunctive use of antimicrobial photodynamic therapy in the surgical treatment of periapical lesions: A case series.

BACKGROUND: Antimicrobial photodynamic therapy (aPDT) is used in endodontics to improve orthograde root canal disinfection as an adjunct to standard treatments. Conversely, evidence concerning the application of aPDT in retrograde endodontic surgery is limited. Thus, the aim of the present study was to provide additional data regarding the use of aPDT in the surgical endodontic treatment of periapical lesions. METHODS: A total of 25 consecutive patients presenting teeth with periapical radiolucency eventually associated with clinical signs and symptoms of apical periodontitis were included. Following access flap completion, osteotomy, mechanical debridement, root apical third resection, and preparation of the root-end cavity, aPDT was applied to decontaminate the surgical site using phenothiazine chloride dye at a concentration of 10 mg/mL and irradiation with a hand-held 100-mW diode laser with a wavelength of 660 ± 10 nm. At the latest follow-up visit, healing was evaluated as successful, uncertain, or failure according to well-established clinical and radiological criteria. RESULTS: Overall, 31 periapical lesions were treated with aPDT. Healing proceeded uneventfully. The mean follow-up time was 36.19 months, with times ranging from 12 to 85 months. A total of 25 (80.65%) cases were classified as successful, 5 (16.13%) as uncertain, and only one (3.22%) as failure. Irrespective of the treatment outcome, all treated teeth were still functional, with no symptoms reported by the patients. CONCLUSION: aPDT as an adjunctive treatment modality in the surgical endodontic treatment of periapical lesions showed promising medium-term results associated with preservation of all diseased teeth.

Successful Osseointegrated Implants in Hypertensive Patients: Retrospective Clinical Study.

PURPOSE: The aim of this study was to investigate the association of hypertension and antihypertensive drugs with the failure of osseointegrated dental implants. MATERIALS AND METHODS: This study conformed to STROBE Guidelines regarding retrospective studies. Data from 602 medical records of patients who received rehabilitation treatment with osseointegrated implants between 2000 and 2017, completed at least 6 months before the study, were analyzed. Data on age, sex, presence or absence of hypertension, use or not of antihypertensive drugs, number of placed and lost implants, and type of prosthetic rehabilitation were collected. Statistical chi-square tests and the Fisher exact test were used to analyze the variables with implant loss, using a significance level of P < .05. RESULTS: One thousand eight hundred eighty-seven implants were placed with a success rate of 97.51% (47 implants lost in 41 patients). Of the 602 patients, 71.43% (432) were normotensive and 28.36% (171) were hypertensive. The success rate of implants in the normotensive group was 93.28%, and in the hypertensive group, it was 92.99%, with no statistical difference between the groups (P = .958). Of these patients, the success rate among the hypertensive group was similar for medication users (92.5%) and for nonusers (94.1%), with no statistically significant difference (P = .939). CONCLUSION: The presence of hypertension, as well as the use of antihypertensives, could not be associated with the failure of osseointegrated implants.

Beta tricalcium phosphate, either alone or in combination with antimicrobial photodynamic therapy or doxycycline, prevents medication-related osteonecrosis of the jaw.

Surgical trauma in those under a prolonged use of bisphosphonates, can lead to mediation-related osteonecrosis of the jaw (MRONJ). This study aimed to evaluate the preventive therapies for MRONJ. Following four cycles of zoledronic acid administration, Wistar rats had their molar extracted, and were organized into nine treatment groups: negative control group (NCG), treated with saline solution and blood-clot in the alveolus; positive control group (PCG), with blood-clot in the alveolus; BG, ß-tricalcium phosphate-based biomaterial; DG, 10% doxycycline gel; aG, antimicrobial photodynamic therapy; and DBG, aBG, aDG, and aDBG, using combination therapy. After 28 days, the lowest bone volume (BV/TV) was reported in PCG (42.17% ± 2.65), and the highest in aDBG (69.85% ± 6.25) (p < 0.05). The higher values of daily mineral apposition rate were recorded in aDBG (2.64 ± 0.48) and DBG (2.30 ± 0.37) (p < 0.001). Moreover, aDBG presented with the highest neoformed bone area (82.44% ± 2.69) (p < 0.05). Non-vital bone was reported only in the PCG (37.94 ± 18.70%). Owing to the key role of the biomaterial, the combination approach (aDBG) was the most effective in preventing MRONJ following tooth extraction.

Aspiration of the dental crown in an elderly patient.

The aspiration of objects and foreign bodies requires quick and systematic care. During emergent orotracheal intubation, accidental dental crown release can cause a threat to the patient's life. This paper aimed to report a case of foreign body (dental prosthetic crown) aspiration and its management and discuss alternative approaches. An 81-year-old male patient, who was admitted to the hospital's intensive care unit (ICU) for meningitis, presented with altered consciousness, and decreased oxygen saturation. He underwent emergent orotracheal intubation. After intubation, chest radiography was performed to check for proper orotracheal tube positioning and lung expansion. The resultant images revealed the presence of a foreign body within the right lower lobe bronchus in the shape of a dental crown. The foreign body, intubation cannula and basket clamp were successfully removed, followed by reintubation of the patient. The foreign body was a prosthetic upper premolar dental crown (24). While care should be taken to avoid complications, if a foreign body is aspirated during emergent orotracheal intubation, endoscopic removal appears safe and effective. Careful creation, placement, maintenance, and preservation of prosthetic crowns are critically important in elderly patients.

Evaluation of Osteoconduction of a Synthetic Hydroxyapatite/ß-Tricalcium Phosphate Block Fixed in Rabbit Mandibles.

(1) Background: This study aimed to evaluate the incorporation of hydroxyapatite/ß-tricalcium phosphate blocks grafted in rabbit mandibles. (2) Methods: Topographic characterization of biomaterial was performed through scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDX). Ten rabbits randomly received autogenous bone graft harvested from the tibia (Autogenous Group-AG) or synthetic biomaterial manufactured in ß-tricalcium phosphate (Biomaterial Group-BG) at their right and left mandibular angles. Euthanasia was performed at 30 and 60 postoperative days; (3) Results: SEM-EDX showed a surface with the formation of crystals clusters. Histological analyses in BG at 30 days showed a slower process of incorporation than AG. At 60 days, BG showed remnants of biomaterial enveloped by bone tissue in the anabolic modeling phase. Histometric analysis showed that mean values of newly formed bone-like tissue in the AG (6.56%/9.70%) were statistically higher compared to BG (3.14%/6.43%) in both periods, respectively. Immunohistochemical analysis demonstrated early bone formation and maturation in the AG with more intense osteopontin and osteocalcin staining. (4) Conclusions: The biomaterial proved to be a possible bone substitute, being incorporated into the receiving bed; however, it showed delayed bone incorporation compared to autogenous bone.

Perspectivas atuais da engenharia de tecidos da articulação temporomandibular / Perspectivas Actuales de la Ingeniería de Tejidos para la Articulación Temporomandibular / Current Perspectives of Tissue Engineering for the Temporomandibular Joint

Introdução: As limitações das terapias atuais para doenças degenerativas da articulação temporomandibular (ATM) levaram ao aumento do interesse em estratégias regenerativas. A engenharia de tecidos (ET), combinando células-tronco, arcabouços e fatores de crescimento, pode fornecer uma substituição biológica funcional e permanente das estruturas da ATM, além de prevenir o avanço de doenças degenerativas. Objetivo: Este artigo descreve as perspectivas atuais da ET das estruturas da ATM em modelos animais. Metodologia: As abordagens da ET foram categorizadas de acordo com as estruturas primárias da ATM: 1) o disco articular, 2) o côndilo mandibular e 3) a fossa glenóide e eminência articular. Resultados: As áreas com a maior quantidade de estudos são o côndilo mandibular e disco articular, em estudos que abordam o uso de arcabouços tridimensionais, de origem sintética e/ou natural, podendo ou não estar associados a células tronco (diferenciadas ou não) e a fatores de crescimento. Conclusão: A ET da ATM ainda é uma área relativamente nova, em desenvolvimento e em constante avanço. Os avanços tecnológicos desenvolvidos nessa área têm o potencial de auxiliar no desenvolvimento de terapias mais eficientes e menos invasivos... (AU)

Introducción: Las limitaciones de las terapias actuales para las enfermedades degenerativas de la articulación temporomandibular (ATM) han llevado a un mayor interés en las estrategias regenerativas. La ingeniería de tejidos, que combina células, andamios y factores de crecimiento, puede proporcionar un reemplazo biológico funcional y permanente de las estructuras de la ATM, además de prevenir el avance de enfermedades degenerativas. Objetivo: Este artículo describe las perspectivas actuales de la ingeniería de tecidos de las estructuras de la ATM en modelos animales. Metodología: Los enfoques de ingeniería de tejidos se clasificaron según las estructuras primarias de la ATM: 1) el disco articular, 2) el cóndilo mandibular y 3) la fosa glenoidea y la eminencia articular. Resultados: Las áreas con mayor número de estudios son el cóndilo mandibular y el disco articular, en estudios que abordan el uso de estructuras tridimensionales, de origen sintético y/o natural, que pueden o no estar asociadas a células (diferenciadas o no) y con factores de crecimiento. Conclusión: La ingeniería de tejidos de la ATM es todavía un área relativamente nueva, en desarrollo y en constante avance. Los avances tecnológicos desarrollados en esta área tienen el potencial de ayudar en el desarrollo de terapias más eficientes y menos invasivas... (AU)

Introduction: The limitations of current therapies for degenerative diseases of the temporomandibular joint (TMJ) have led to increased interest in regenerative strategies. Tissue engineering (TE), combining stem cells, scaffolds, and growth factors, can provide a functional and permanent biological replacement of TMJ structures, in addition to preventing the advancement of degenerative diseases. Aim: This article describes current TE perspectives of TMJ structures in animal models. Methods: TE approaches were categorized according to the primary TMJ structures: 1) the articular disc, 2) the mandibular condyle, and 3) the glenoid fossa and articular eminence. Results: The areas with the greatest number of studies are the mandibular condyle and articular disc, in studies that address the use of three-dimensional scaffolds, of synthetic and/ or natural origin, which may or may not be associated with stem cells (differentiated or not) and with growth factors. Conclusion: TE of the TMJ is still a relatively new, developing, and constantly advancing area. The technological advances developed in this area have the potential to assist in the development of more efficient and less invasive therapies... (AU)

Perspectivas atuais da Engenharia de Tecidos da articulação temporomandibular / Perspectivas Actuales de la Ingeniería de Tejidos para la Articulación Temporomandibular / Current Perspectives of Tissue Engineering for the Temporomandibular Joint

Introdução: As limitações das terapias atuais para doenças degenerativas da articulação temporomandibular (ATM) levaram ao aumento do interesse em estratégias regenerativas. A engenharia de tecidos (ET), combinando células-tronco, arcabouços e fatores de crescimento, pode fornecer uma substituição biológica funcional e permanente das estruturas da ATM, além de prevenir o avanço de doenças degenerativas. Objetivo: Este artigo descreve as perspectivas atuais da ET das estruturas da ATM em modelos animais. Metodologia: As abordagens da ET foram categorizadas de acordo com as estruturas primárias da ATM: 1) o disco articular, 2) o côndilo mandibular e 3) a fossa glenóide e eminência articular. Resultados: As áreas com a maior quantidade de estudos são o côndilo mandibular e disco articular, em estudos que abordam o uso de arcabouços tridimensionais, de origem sintética e/ou natural, podendo ou não estar associados a células tronco (diferenciadas ou não) e a fatores de crescimento. Conclusão: A ET da ATM ainda é uma área relativamente nova, em desenvolvimento e em constante avanço. Os avanços tecnológicos desenvolvidos nessa área têm o potencial de auxiliar no desenvolvimento de terapias mais eficientes e menos invasivos... (AU)

Introducción: Las limitaciones de las terapias actuales para las enfermedades degenerativas de la articulación temporomandibular (ATM) han llevado a un mayor interés en las estrategias regenerativas. La ingeniería de tejidos, que combina células, andamios y factores de crecimiento, puede proporcionar un reemplazo biológico funcional y permanente de las estructuras de la ATM, además de prevenir el avance de enfermedades degenerativas. Objetivo: Este artículo describe las perspectivas actuales de la ingeniería de tecidos de las estructuras de la ATM en modelos animales. Metodología: Los enfoques de ingeniería de tejidos se clasificaron según las estructuras primarias de la ATM: 1) el disco articular, 2) el cóndilo mandibular y 3) la fosa glenoidea y la eminencia articular. Resultados: Las áreas con mayor número de estudios son el cóndilo mandibular y el disco articular, en estudios que abordan el uso de estructuras tridimensionales, de origen sintético y/o natural, que pueden o no estar asociadas a células (diferenciadas o no) y con factores de crecimiento. Conclusión: La ingeniería de tejidos de la ATM es todavía un área relativamente nueva, en desarrollo y em constante avance. Los avances tecnológicos desarrollados en esta área tienen el potencial de ayudar en el desarrollo de terapias más eficientes y menos invasivas... (AU)

Introduction: The limitations of current therapies for degenerative diseases of the temporomandibular joint (TMJ) have led to increased interest in regenerative strategies. Tissue engineering (TE), combining stem cells, scaffolds, and growth factors, can provide a functional and permanent biological replacement of TMJ structures, in addition to preventing the advancement of degenerative diseases. Aim: This article describes current TE perspectives of TMJ structures in animal models. Methods: TE approaches were categorized according to the primary TMJ structures: 1) the articular disc, 2) the mandibular condyle, and 3) the glenoid fossa and articular eminence. Results: The areas with the greatest number of studies are the mandibular condyle and articular disc, in studies that address the use of three-dimensional scaffolds, of synthetic and/or natural origin, which may or may not be associated with stem cells (differentiated or not) and with growth factors. Conclusion: TE of the TMJ is still a relatively new, developing, and constantly advancing area. The technological advances developed in this area have the potential to assist in the development of more efficient and less invasive therapies... (AU)

Implantes em pacientes com osteonecrose dos maxilares associado ao uso de bifosfonatos: relato de caso e revisão de literatura / Implants in patients with bisphosphonate-related osteonecrosis of the jaw: clinical case and literature review / Implantes en pacientes con osteonecrosis de los maxilares inducida por bifosfonatos: reporte de caso y revisión de literatura

A osteoporose é responsável por causar condições devastadoras no tecido ósseo elevando o risco de fraturas, constituindo uma problemática importante de saúde pública. É comum o uso de medicamentos, como os bifosfonatos para o controle dessa patologia. Contudo, a associação do uso desse medicamento com a osteonecrose dos maxilares vem sendo amplamente discutido na literatura, assim como a dificuldade da reabilitação desses pacientes como implantes e do protocolo de tratamento dessa condição. Assim sendo, o objetivo do presente trabalho foi realizar uma revisão de literatura para discutir as principais falhas associadas a instalação de implantes em pacientes portadores de osteonecrose dos maxilares associada ao uso de bifosfonatos (OMAB), assim como as possibilidades de tratamento, e relatar um caso clínico. As informações obtidas na revisão nos permitiu concluir que o uso de bifosfonatos orais, como o alendronato, é capaz de levar ao desenvolvimento da OMAB sendo necessária bastante precaução na reabilitação oral com implantes dentários, tanto em pacientes que fazem uso, como pacientes que apresentam risco de futura utilização de bifosfonatos para o tratamento de desordens esqueléticas(AU)

Osteoporosis is responsible for the devastating disease in the bone tissue, increasing the risk of fractures, constituting an important public health problem. It is common to use medications, such as bisphosphonates to control this pathology. The dosage application with osteonecrosis of the jaws has been discussed in the literature, as well as a rehabilitation task such as the implant and the transport protocol of this condition. Thus, the present study was carried out in a literature review on the main problems related to bisphosphonate-related osteonecrosis of the jaw (BRONJ) as well as the possibilities of treatment, and to report a clinical case. The information can be reviewed together, so that the use of oral bisphosphonates, such as alendronate, will be able to lead to the development of bisphosphonate-related osteonecrosis of the jaw (BRONJ), the future use of bisphosphonates for the treatment of skeletal disorders(AU)

La osteoporosis es responsable de causar condiciones devastadoras en el tejido óseo, elevando el riesgo de fracturas, constituyendo una problemática importante de salud pública. Es común el uso de medicamentos, como los bifosfonatos para el control de esa patología. Sin embargo, la asociación de los usos de este medicamento con la osteonecrosis de los maxilares viene siendo ampliamente discutida en la literatura, así como la dificultad de la rehabilitación dos pacientes como implantes y del protocolo de tramo de esa condición. Por lo tanto, el objetivo del presente trabajo fue realizar una revisión de literatura para discutir las principales fallas asociadas a la instalación de implantes en pacientes portadores de osteonecrosis maxilar inducida por bifosfonatos (ONMB), así como las posibilidades de tratamiento, e informar un caso clínico. La información obtenida en la revisión nos permitió concluir que el uso de bifosfonatos orales, como el alendronato, es capaz de llevar al desarrollo de la osteonecrosis maxilar inducida por bifosfonatos (ONMB), siendo necesario bastante precaución en la rehabilitación oral con implantes dentales, tanto en pacientes que hacen uso, como pacientes que presentan riesgo de la futura utilización de bifosfonatos para el tratamiento de desórdenes esqueléticos(AU)

Oclusão bilateral balanceada: um princípio básico de prótese total: relato de caso / Balanced bilateral occlusion: a basic principle of full arch prosthesis: case report / Oclusión bilateral balanceada: un principio básico de prótesis total: reporte de caso clínico

A oclusão equilibrada e em perfeita harmonia é objetivo primordial em prótese total. Este trabalho tem como objetivo mostrar a influência da utilização dos princípios na confecção de prótese total e seu resultado. Paciente do sexo feminino, 67 anos, portadora de prótese total bimaxilar buscou atendimento especializado tendo como queixa principal mobilidade de sua prótese total superior, acompanhada de queixa estética. Dentre os planos de tratamento propostos, foi realizada a confecção de novas próteses totais respeitando princípios e passos visando o reestabelecimento de função e estética. No momento da instalação observou-se a oclusão bilateral balanceada, tendo objetivo do tratamento alcançado. A confecção de prótese odontológica deve respeitar os princípios básicos e fundamentais de confecção, bem como os requisitos inerentes às possibilidades reabilitadoras, tendo em vista que o seu resultado influencia diretamente na qualidade de vida do paciente(AU)

The right balanced occlusion and perfect harmony are the main target in full arch prosthesis. The aim of this work is to evidence the influence on correct use of full arch prosthetic rehabilitation precepts in manufacture and its result. A 67-year-old female patient with a total bimaxillary prosthesis sought specialized care having as main complaint the mobility of her maxillary total prosthesis and aesthetic complaint. Among the proposed treatment plans, it was carried out making new dentures respecting principles and steps towards the function and aesthetics re-establishment. When installing observed balanced bilateral occlusion, with the aim reached treatment. The preparation of dental prosthesis must respect the steps and basic principles of preparation and requirements inherent to rehabilitation possibilities, considering that its result directly influences the quality of life of patient(AU)

La oclusión equilibrada y en perfecta armonía eres objetivo primordial en prótesis total. Este trabajo tiene como objetivo mostrar la influencia de la utilización de los básicos principios en la confección de prótesis total y su resultado. Paciente, sexo femenino, 67 años, hace uso de prótesis total bimaxilar recurrió al atendimiento especializado y como principal reclamación la movilidad de su prótesis total superior tan cómo la estética. Entre las proposiciones de planos de tratamiento, se fue realizada la confección de nuevo par de prótesis totales respetando los principios y etapas en busca de la devolución de función y estética. Al momento de la instalación se fue posible observar la oclusión bilateral balanceada, teniendo el objetivo alcanzado. Para que la prótesis odontológica sea confeccionada se debe respetar los principios básicos fundamentales de la confección y los requisitos inherentes a las posibilidades rehabilitadoras, observando que su resultado tiene directa influencia en la calidad de vida del paciente(AU)