RESUMEN
INTRODUCTION: Palatal displacement of maxillary anterior teeth is common in clinical practice. Previous studies have reported that the labial bone around palatally-displaced incisors is thinner than that around normally-placed teeth. Therefore, it is necessary to elucidate alveolar bone changes after alignment to guide orthodontic treatment. In this study, we investigated the alveolar bone changes around palatally-displaced maxillary lateral incisors before and after treatment, and the effects of extraction and age using cone-beam computed tomography. METHODS: In this retrospective study, 55 patients with unilateral palatally-displaced maxillary lateral incisors were included. Three-dimensional alveolar bone changes were measured at three levels (25%, 50% and 75% of the root length) using cone-beam computed tomography. Group comparisons were made between displaced and control teeth, extraction and non-extraction groups, and adult and minor groups. RESULTS: After orthodontic treatment, labiopalatal and palatal alveolar bone widths decreased at all measured levels. Labial alveolar bone width increased significantly at P25, but decreased at P75. Concavity decreased, while tooth-axis angle, tooth length, B-CEJ and P-CEJ increased. Changes in LB and LP at P75, B-CEJ and P-CEJ were statistically significant. After treatment, the tooth-axis angle on the PD side increased by 9.46°. The change in tooth-axis angle on the PD side was significantly smaller, and LB and LP decreased more at P75, in the extraction group. CONCLUSIONS: Compared to the control teeth, alveolar bone thickness and height for the displaced teeth decreased more significantly after treatment. Tooth extraction and age also influenced alveolar bone changes.
Asunto(s)
Incisivo , Maloclusión , Adulto , Humanos , Incisivo/diagnóstico por imagen , Incisivo/anatomía & histología , Estudios Retrospectivos , Maxilar/diagnóstico por imagen , Maxilar/anatomía & histología , Tomografía Computarizada de Haz Cónico/métodosRESUMEN
BACKGROUND: The operation accuracy and efficiency of dynamic navigated endodontic surgery were evaluated through in vitro experiments. This study provides a reference for future clinical application of dynamic navigation systems in endodontic surgery. MATERIALS AND METHODS: 3D-printed maxillary anterior teeth were used in the preparation of models for endodontic surgery. Endodontic surgery was performed with and without dynamic navigation by an operator who was proficient in dynamic navigation technology but had no experience in endodontic surgery. Optical scanning data were applied to evaluate the length and angle deviations of root-end resection. And the operation time was recorded. T tests were used to analyze the effect of dynamic navigation technology on the accuracy and duration of endodontic surgery. RESULTS: With dynamic navigation, the root-end resection length deviation was 0.46 ± 0.06 mm, the angle deviation was 2.45 ± 0.96°, and the operation time was 187 ± 22.97 s. Without dynamic navigation, the root-end resection length deviation was 1.20 ± 0.92 mm, the angle deviation was 16.20 ± 9.59°, and the operation time was 247 ± 61.47 s. Less deviation was achieved and less operation time was spent with than without dynamic navigation (P < 0.01). CONCLUSION: The application of a dynamic navigation system in endodontic surgery can improve the accuracy and efficiency significantly for operators without surgical experience and reduce the operation time.
Asunto(s)
Impresión Tridimensional , Humanos , Proyectos Piloto , Técnicas In Vitro , Cirugía Asistida por Computador/métodos , Apicectomía/métodos , Tempo Operativo , Sistemas de Navegación QuirúrgicaRESUMEN
BACKGROUND: The determining effect of facial hard tissues on soft tissue morphology in orthodontic patients has yet to be explained. The aim of this study was to clarify the hard-soft tissue relationships of the lower 1/3 of the face in skeletal Class II-hyperdivergent patients compared with those in Class I-normodivergent patients using network analysis. METHODS: Fifty-two adult patients (42 females, 10 males; age, 26.58 ± 5.80 years) were divided into two groups: Group 1, 25 subjects, skeletal Class I normodivergent pattern with straight profile; Group 2, 27 subjects, skeletal Class II hyperdivergent pattern with convex profile. Pretreatment cone-beam computed tomography and three-dimensional facial scans were taken and superimposed, on which landmarks were identified manually, and their coordinate values were used for network analysis. RESULTS: (1) In sagittal direction, Group 2 correlations were generally weaker than Group 1. In both the vertical and sagittal directions of Group 1, the most influential hard tissue landmarks to soft tissues were located between the level of cemento-enamel junction of upper teeth and root apex of lower teeth. In Group 2, the hard tissue landmarks with the greatest influence in vertical direction were distributed more forward and downward than in Group 1. (2) In Group 1, all the correlations for vertical-hard tissue to sagittal-soft tissue position and sagittal-hard tissue to vertical-soft tissue position were positive. However, Group 2 correlations between vertical-hard tissue and sagittal-soft tissue positions were mostly negative. Between sagittal-hard tissue and vertical-soft tissue positions, Group 2 correlations were negative for mandible, and were positive for maxilla and teeth. CONCLUSION: Compared with Class I normodivergent patients with straight profile, Class II hyperdivergent patients with convex profile had more variations in soft tissue morphology in sagittal direction. In vertical direction, the most relevant hard tissue landmarks on which soft tissue predictions should be based were distributed more forward and downward in Class II hyperdivergent patients with convex profile. Class II hyperdivergent pattern with convex profile was an imbalanced phenotype concerning sagittal and vertical positions of maxillofacial hard and soft tissues.
Asunto(s)
Puntos Anatómicos de Referencia , Cefalometría , Tomografía Computarizada de Haz Cónico , Cara , Imagenología Tridimensional , Maloclusión Clase II de Angle , Maloclusión Clase I de Angle , Mandíbula , Humanos , Masculino , Femenino , Adulto , Maloclusión Clase II de Angle/diagnóstico por imagen , Maloclusión Clase II de Angle/patología , Cefalometría/métodos , Imagenología Tridimensional/métodos , Cara/anatomía & histología , Cara/diagnóstico por imagen , Maloclusión Clase I de Angle/diagnóstico por imagen , Maloclusión Clase I de Angle/patología , Mandíbula/diagnóstico por imagen , Mandíbula/patología , Adulto Joven , Maxilar/diagnóstico por imagen , Maxilar/patología , Mentón/diagnóstico por imagen , Mentón/anatomía & histología , Mentón/patología , Incisivo/diagnóstico por imagen , Incisivo/anatomía & histología , Procesamiento de Imagen Asistido por Computador/métodosRESUMEN
BACKGROUND: This study quantitatively analyzed the anatomic structure of the alveolar bone in the maxillary molar region at three potential locations for Temporary Anchorage Device (TAD) placement. Additionally, the study compared the variability in this region across different age groups, sagittal skeletal patterns, vertical facial types, and sexes. METHODS: In this retrospective cone-beam computed tomography study, the buccal alveolar bone was analyzed in the posterior molar area of 200 patients, the measurement items include buccal alveolar bone height, alveolar bone thickness, interradicular distance, and maxillary retromolar space. RESULTS: Buccal alveolar height was greatest in the U56 region. The interradicular space was largest in the U56 region and increased from the alveolar crest to the sinus floor. Buccal alveolar bone thickness was highest in the U67 region and generally increased from the alveolar crest to the sinus floor. The maxillary retromolar space gradually increased from the alveolar crest to the root apex. CONCLUSIONS: TADs are safest when placed in the buccal area between the maxillary second premolar and the first molar, particularly at the 9 mm plane. The U67 region is the optimal safe zone for TAD placement for maxillary dentition distalization. TADs placement in adolescents can be challenging. Maxillary third molar extraction can be considered for maxillary dentition distalization.
Asunto(s)
Proceso Alveolar , Tomografía Computarizada de Haz Cónico , Maxilar , Diente Molar , Humanos , Tomografía Computarizada de Haz Cónico/métodos , Estudios Retrospectivos , Femenino , Masculino , Diente Molar/diagnóstico por imagen , Diente Molar/anatomía & histología , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/anatomía & histología , Maxilar/diagnóstico por imagen , Maxilar/anatomía & histología , Adolescente , Adulto , Adulto Joven , Métodos de Anclaje en Ortodoncia/métodos , Persona de Mediana EdadRESUMEN
Periodontitis is the sixth most prevalent chronic disease globally and places significant burdens on societies and economies worldwide. Behavioral modification, risk factor control, coupled with cause-related therapy have been the "gold standard" treatment for managing periodontitis. Given that host inflammatory and immunological responses play critical roles in the pathogenesis of periodontitis and impact treatment responses, several adjunctive strategies aimed at modulating host responses and improving the results of periodontal therapy and maintenance have been proposed. Of the many pharmacological host modulators, we focused on non-steroidal anti-inflammatory drugs (NSAIDs), due to their long history and extensive use in relieving inflammation and pain and reducing platelet aggregation. NSAIDs have been routinely indicated for treating rheumatic fever and osteoarthritis and utilized for the prevention of cardiovascular events. Although several efforts have been made to incorporate NSAIDs into the treatment of periodontitis, their effects on periodontal health remain poorly characterized, and concerns over the risk-benefit ratio were also raised. Moreover, there is emerging evidence highlighting the potential of NSAIDs, especially aspirin, for use in periodontal regeneration. This review summarizes and discusses the use of NSAIDs in various aspects of periodontal therapy and regeneration, demonstrating that the benefits of NSAIDs as adjuncts to conventional periodontal therapy remain controversial. More recent evidence suggests a promising role for NSAIDs in periodontal tissue engineering and regeneration.
Asunto(s)
Antiinflamatorios no Esteroideos , Periodontitis , Humanos , Antiinflamatorios no Esteroideos/uso terapéutico , Aspirina/uso terapéutico , Inflamación/tratamiento farmacológico , RegeneraciónRESUMEN
Uranium detection and extraction are necessary for the ecological environment as the growing demand for nuclear energy. Hence, exploring stable materials with excellent performance in uranium extraction and detection is highly desired. Herein, by amidoxime-functionalizing tetrafluoroterephthalonitrile (TFTPN) crosslinked hydroquinone (bP), phloroglucinol (tP), and 4,4',4â³-trihydroxytriphenylmethane (tBP), three covalent organic polymers (COPs) bPF-AO, tPF-AO, and tBPF-AO with different crosslinked architectures are fabricated. Uranium extraction and detection related to the difference in molecule construction were systemically investigated, giving some reference for the rational design and fabrication of advanced materials for the removal and monitoring of uranium in the environment. The tPF-AO with a compact steric structure achieves the highest theoretical maximum adsorption capacity of 578.9 ± 15.2 mg g-1 and the best recyclability. The scattering electron center and U(VI) selective binding sites endow tBPF-AO with excellent capability in selective detection for U(VI), with a limit of detection of 24.2 nmol L-1, which is well below the standard for U(VI) in drinking water of the World Health Organization (WHO). Moreover, the COPs possess prominent physicochemical stability and recyclability, and more importantly, the PAE-based COPs are derived from inexpensive industry materials with easy processing methods, providing an efficient and economical way for the detection and adsorption of uranium.
Asunto(s)
Uranio , Floroglucinol , Adsorción , Sitios de Unión , Electrones , PolímerosRESUMEN
Bacterial strains belonging to Citrobacter spp. were reported to produce polysaccharides consisting of N-acetylglucosamine and glucosamine like chitosan, with high flocculation activity. In this work, the flocculation dewatering performance of activated sludge conditioned by a novel cationic chitosan-like bioflocculant (BF) named BF01314, produced from Citrobacter youngae GTC 01314, was evaluated under the influences of flocculant dosage, pH, and temperature. At BF dosage as low as 0.5 kg/t DS, the sludge dewaterability was significantly enhanced in comparison to the raw (untreated) sludge, featuring well-flocculated characteristic (reduction in CST from 22.0 s to 9.4 s) and good sludge filterability with reduced resistance (reduction in SRF by one order from 7.42 × 1011 to 9.59 × 1010 m/kg) and increased compactness of sludge (increase in CSC from 15.2 to 23.2%). Besides, the BF demonstrated comparable high sludge dewatering performance within the pH range between 2 and 8, and temperature range between 25 °C and 80 °C. Comparison between the BF, the pristine chitosan and the commercial cationic copolymer MF 7861 demonstrated equivalent performance with enhanced dewaterability at the dosage between 2.0 and 3.0 kg/t DS. Besides, the BF demonstrated strong flocculation activity (>99%) when added to the sludge suspension using moderate to high flocculation speeds (100-200 rpm) with at least 3-min mixing time. The BF's reaction in sludge flocculation was best fitted with a pseudo first-order kinetic model. Electrostatic charge patching and polymer bridging mechanisms are believed to be the dominant mechanistic phenomena during the BF's sludge conditioning process (coagulation-flocculation).
Asunto(s)
Quitosano , Aguas del Alcantarillado , Cinética , Citrobacter , Floculación , Polímeros , Eliminación de Residuos Líquidos , Agua , FiltraciónRESUMEN
PURPOSE: To apply geometric morphometrics and multivariate statistics to evaluate changes of the face for female Chinese patients who underwent orthodontic treatment with different type of anchorage control. METHODS: Forty-six adult female patients were enrolled including 33 four first premolar extraction cases (17 patients with mini-implants for maximum anchorage control and 16 patients without mini-implants) and 13 non-extraction cases with minimum treatment duration of 15 months. Spatially dense correspondence was established among all the images The pre-and post-treatment average faces of the two extraction groups and the non-extraction group were generated. Partial least squares regression was used to test the statistical significance of the effects of treatment for different anchorage choice. RESULTS: The upper and lower lips were retruded significantly after treatment in the extraction groups. In the maximum anchorage control group, the temple and cheek were depressed by approximately 1 mm, and the zygomatic regions were increased in the mid-face. However, these changes were not statistically significant. In comparison, no statistically significant facial changes occurred in the non-extraction group. CONCLUSIONS: The anchorage choice and the removal of four first premolar extraction influence lip shape as well as the perioral regions. However, extraction treatment does not impact the appearance of the cheeks and temples on a statistically level, as compared to orthodontic treatment without premolar extractions. Spatially dense geometric morphometric facilitates comprehensive treatment effect quantification and visualization on the full facial changes for improving orthodontic outcome evaluation.
Asunto(s)
Labio , Extracción Dental , Humanos , Femenino , Cefalometría/métodos , Extracción Dental/métodos , Labio/anatomía & histologíaRESUMEN
OBJECTIVE: The objective of the study was to explore and validate the consensus of orthodontic experts on the assessment of orthodontic treatment outcomes based on subjective and objective analysis. MATERIALS AND METHODS: The research consisted of two parts: the exploration and verification of expert consensus. First, a sample of 108 cases randomly selected from six dental schools in China were evaluated by 69 orthodontic experts and measured by researchers based on post-treatment study casts and lateral cephalograms, respectively. Then, through statistical analysis, the objective indicators significantly correlated with experts' subjective evaluations were selected, their weights were determined, and the critical values of satisfactory, acceptable and unacceptable grades were screened. Subsequently, another sample of 72 cases were evaluated by another 36 orthodontic experts, and the subjective evaluation results were compared with the objective measurement results. RESULTS: There were six model indicators and seven cephalometric indicators being significantly correlated with the experts' subjective evaluations, including occlusal contact, overjet, midline, interproximal contact, alignment, occlusal relationship, L1/NB, ANB, SN/OP, U1/SN, LL-EP, Cm-Sn-UL and Ns-Prn-Pos, with a cumulative R2 of 0.704. In the verification part, the correlation coefficient between the 36 experts' subjective scores and objective regression scores was 0.716 (P < .001); the correlation coefficient between the 36 experts' subjective grades and objective grades was 0.757 (P < .001). CONCLUSIONS: Orthodontic experts had good consistency in the subjective evaluation of the combined records of post-treatment study casts and lateral cephalograms. The objective indicators selected from subjective and objective analysis had good reliability and validity and could further improve the existing occlusal indices.
Asunto(s)
Consenso , Reproducibilidad de los Resultados , Resultado del Tratamiento , Radiografía , CefalometríaRESUMEN
Here we present an innovative, universal, scalable, and straightforward strategy for cultivating a resilient, flexible lithium-ion battery (LIB) based on the bacterial-based self-growing approach. The electrodes and separator layers are integrated intrinsically into one unity of sandwich bacterial cellulose integrated film (SBCIF), with various active material combinations and tailored mechanical properties. The flexible LIB thereof showcases prominent deformation tolerance and multistage foldability due to the unique self-generated wavy-like structure. The LTO|LFP (Li4Ti5O12 and LiFePO4) SBCIF-based flexible LIB demonstrates reliable long-term electrochemical stability with high flexibility, by exhibiting a high capacity retention (>95%) after 500 cycles at 1C/1C after experiencing a 10â¯000 bending/flattening treatment. The LTO|LFP SBCIF battery subjected to a simultaneous bending/flattening and cycling experiment shows an extraordinary capacity retention rate (>68%) after 200 cycles at 1C/1C. The biobased self-growing approach offers an exciting and promising pathway toward the tailored, integrated high-performance flexible LIBs.
Asunto(s)
Suministros de Energía Eléctrica , Litio , Iones , Electrodos , CelulosaRESUMEN
This study proposes a method that integrates maxillary dental cast and cephalograms and evaluates its accuracy compared with cone-beam computed tomography (CBCT) scans. The study sample comprised 20 adult patients with records of dental casts, cephalograms, and craniofacial CBCT scans. The maxillary dental cast was integrated with lateral and frontal cephalograms based on best-fit registration of palatal and dental outline curves from dental cast with cephalogram tracings. Linear measurement was conducted to assess the intra- and inter-examiner reproducibility of the proposed integration method using intraclass correlation coefficients; linear and angular measurements were conducted to assess its accuracy with CBCT scans as a standard reference. Paired t test, one sample t test, and mean ± standard deviation of the absolute value of difference were used to compare the integrated images and CBCT. The integration method showed good intra- and inter-examiner reproducibility (intraclass correlation coefficients > 0.98). The differences in linear and angular measurements between the integrated images and CBCT were not statistically significant but with a large deviation. When absolute value of difference was computed, the linear distance error was 0.51 ± 0.34 mm, the tooth point coordinate errors in X, Y and Z axes were 0.22 ± 0.22, 0.38 ± 0.32 and 0.21 ± 0.21 mm, respectively; the angular error in pitch, roll and yaw of the dental cast was 0.82 ± 0.51, 0.92 ± 0.59 and 0.80 ± 0.41 degree, respectively. The proposed method for integration of dental cast and cephalograms showed good reproducibility and acceptable accuracy compared with CBCT. It could be helpful for researchers to study three-dimensional tooth growth changes using the existing craniofacial growth data especially cephalograms.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Imagenología Tridimensional , Adulto , Humanos , Cefalometría/métodos , Tomografía Computarizada de Haz Cónico/métodos , Imagenología Tridimensional/métodos , Maxilar/diagnóstico por imagen , Reproducibilidad de los ResultadosRESUMEN
Surface coating technology is an important way to improve the properties of orthodontic appliances, allowing for reduced friction, antibacterial properties, and enhanced corrosion resistance. It improves treatment efficiency, reduces side effects, and increases the safety and durability of orthodontic appliances. Existing functional coatings are prepared with suitable additional layers on the surface of the substrate to achieve the abovementioned modifications, and commonly used materials mainly include metal and metallic compound materials, carbon-based materials, polymers, and bioactive materials. In addition to single-use materials, metal-metal or metal-nonmetal materials can be combined. Methods of coating preparation include, but are not limited to, physical vapor deposition (PVD), chemical deposition, sol-gel dip coating, etc., with a variety of different conditions for preparing the coatings. In the reviewed studies, a wide variety of surface coatings were found to be effective. However, the present coating materials have not yet achieved a perfect combination of these three functions, and their safety and durability need further verification. This paper reviews and summarizes the effectiveness, advantages and disadvantages, and clinical perspectives of different coating materials for orthodontic appliances in terms of friction reduction, antibacterial properties, and enhanced corrosion resistance, and discusses more possibilities for follow-up studies as well as for clinical applications in detail.
Asunto(s)
Alambres para Ortodoncia , Titanio , Fricción , Corrosión , Titanio/química , Ensayo de Materiales , Propiedades de Superficie , Materiales Biocompatibles Revestidos/química , Aparatos Ortodóncicos , Antibacterianos/farmacologíaRESUMEN
INTRODUCTION: This study aimed to compare postsurgical stability between conventional (CSA) and surgery-first (SFA) approaches and investigate its prognostic factors in patients with a skeletal Class â ¢ extraction. METHODS: Twenty and 19 patients treated with LeFort I osteotomy and bilateral sagittal split ramus osteotomy (BSSRO) with premolar extraction were enrolled in SFA and CSA groups, respectively. Serial cone-beam computed tomography images obtained before surgery, immediately after surgery (T1), 3 months after surgery, and 12 months after surgery were used for 3-dimensional quantitative analysis. The condyle was segmented for analyzing volumetric changes. Repeated measures analysis of variance, independent t test, and chi-square test were used to compare time-course and intergroup differences. Pearson and Kendall correlation and multivariate linear regression analyses were used to explore prognostic factors affecting skeletal stability. RESULTS: In both CSA and SFA, postsurgical relapse mainly occurred in the mandible sagittal and vertical dimensions and during the first 3 months after surgery. Stability in SFA was significantly less than that in CSA. Intraoperatively, inferolateral condylar displacement with proximal segment inwards, clockwise rotation, and return movements after surgery were observed regardless of the treatment approach. The condylar volume remained stable over time. Multivariate regression analysis showed that posterior vertical dimension (VD) at T1 (-1.63 mm), surgical amount of mandibular setback (-10.33 mm), surgical condylar downwards displacement (-1.28 mm), and anterior overjet at T1 (6.43 mm) were the most important predictors of early mandibular relapse (r2 = 0.593). CONCLUSIONS: The risk of early relapse could be reduced by controlling the anterior, middle, and posterior constraints provided by the prediction model.
Asunto(s)
Maloclusión de Angle Clase III , Cóndilo Mandibular , Humanos , Cóndilo Mandibular/cirugía , Estudios Prospectivos , Estudios Retrospectivos , Maloclusión de Angle Clase III/diagnóstico por imagen , Maloclusión de Angle Clase III/cirugía , Mandíbula/diagnóstico por imagen , Mandíbula/cirugía , Osteotomía Sagital de Rama Mandibular/métodos , Cefalometría/métodos , Recurrencia , Estudios de SeguimientoRESUMEN
BACKGROUND: Periodontitis triggers tooth loss and affects the health of population worldwide. Emerging evidence hints that circular RNAs (circRNAs) are involved in various diseases, including periodontitis. This study aimed to investigate the role of circ_0099630 in the progression of periodontitis. METHODS: Periodontitis cell model was constructed by treating human periodontal ligament cells (HPDLCs) with lipopolysaccharide (LPS). Quantitative real-time PCR was used to analyze the expression of circ_0099630, microRNA-409-3p (miR-409-3p) and toll-like receptor 4 (TLR4) mRNA. Western blot was used for detecting protein levels of TLR4, cleaved-caspase 3, Bcl-2, CyclinD1 and NF-κB signaling markers. For function analyses, cell proliferation was assessed by CCK-8 assay and EdU assay. The releases of pro-inflammation factors were monitored by ELISA kits. The potential relationship between miR-409-3p and circ_0099630 or TLR4 was verified by dual-luciferase reporter assay, RIP assay and pull-down assay. RESULTS: The expression of circ_0099630 and TLR4 was elevated in periodontitis patients and LPS-treated HPDLCs. LPS induced HPDLC proliferation inhibition, apoptosis and inflammatory responses, while circ_0099630 knockdown or TLR4 knockdown alleviated these injuries. Besides, TLR4 overexpression reversed the inhibitory effect of circ_0099630 knockdown on LPS-induced HPDLC injuries. Mechanism analysis showed that circ_0099630 positively regulated TLR4 expression by acting as miR-409-3p sponge. MiR-409-3p restoration largely ameliorated LPS-induced HPDLC injuries by depleting TLR4. Moreover, LPS activated the NF-κB signaling pathway, while circ_0099630 knockdown inhibited the activity of NF-κB signaling via the miR-409-3p/TLR4 axis. CONCLUSION: Circ_0099630 knockdown relieved LPS-induced HPDLC injury by miR-409-3p/TLR4 axis, suggesting that circ_0099630 might be a potential target for periodontitis treatment.
Asunto(s)
MicroARNs , Periodontitis , Humanos , Proliferación Celular , Lipopolisacáridos/farmacología , MicroARNs/genética , FN-kappa B , Ligamento Periodontal , Periodontitis/genética , Receptor Toll-Like 4/genética , ARN Circular/genéticaRESUMEN
BACKGROUND: Assessment of growth-related or treatment-related changes in the maxilla requires a reliable method of superimposition. Such methods are well established for two-dimensional (2D) cephalometric images but not yet for three-dimensions (3D). The aims of this study were to identify natural reference structures (NRS) for the maxilla in growing patients in 3D, opportunistically using orthodontic mini-screws as reference; and to test the applicability of the proposed NRS for maxillary superimposition by assessing the concordance of this approach with Björk's 'stable reference structures' in lateral projection. METHODS: The stability of the mini-screws was tested on longitudinal pairs of pre- and post-orthodontic cone-beam computed tomography (CBCT) images by measuring the distance changes between screws. After verifying the stability of the mini-screws, rigid registration was performed for aligning the stable mini-screws. Then, non-rigid registration was used to establish the dense voxel-correspondence among CBCT images and calculate the displacement of each voxel belonging to the maxilla relative to the mini-screws. The displacement vectors were transformed to a standardized maxillary template to categorize the stability of the internal structures statistically. Those voxels that displaced less relative to the mini-screws were considered as the natural reference structures (NRS) for the maxilla. Test samples included another dataset of longitudinal CBCT scans. They were used to evaluate the applicability of the proposed NRS for maxillary superimposition. We assessed whether aligning the maxilla with proposed NRS is in concordance with the maxillary internal reference structures superimposition in the traditional 2D lateral view as suggested by Björk. This was quantitively assessed by comparing the mean sagittal and vertical tooth movements for both superimposition methods. RESULTS: The stability of the mini-screws was tested on 10 pairs of pre- and post-orthodontic cone-beam computed tomography (CBCT) images (T1: 12.9 ± 0.8 yrs, T2: 14.8 ± 0.7 yrs). Both the loaded and the unloaded mini-screws were shown to be stable during orthodontic treatment, which indicates that they can be used as reference points. By analyzing the deformation map of the maxilla, we confirmed that the infraorbital rims, maxilla around the piriform foramen, the infrazygomatic crest and the hard palate (palatal vault more than 1 cm distal to incisor foramen except the palatal suture) were stable during growth. Another dataset of longitudinal CBCT scans (T1: 12.2 ± 0.63 yrs, T2: 15.2 ± 0.96 yrs) was used to assess the concordance of this approach with Björk's 'stable reference structures'. The movement of the maxillary first molar and central incisor showed no statistically significant difference when superimposing the test images with the proposed NRS or with the classic Björk maxillary superimposition in the lateral view. CONCLUSIONS: The infraorbital rims, maxilla around the piriform foramen, the infrazygomatic crest and the hard palate (palatal vault more than 1 cm posterior to incisal foramen except the palatal suture) were identified as stable regions in the maxilla. These stable structures can be used for maxillary superimposition in 3D and generate comparable results to Björk superimposition in the lateral view.
Asunto(s)
Maxilar , Paladar Duro , Humanos , Maxilar/diagnóstico por imagen , Cefalometría , Tomografía Computarizada de Haz Cónico , Atención OdontológicaRESUMEN
Oral squamous cell carcinoma (OSCC) is one of the top 15 most prevalent cancers worldwide. However, the current treatment models for OSCC (e.g., surgery, chemotherapy, radiotherapy, and combination therapy) present several limitations: damage to adjacent healthy tissue, possible recurrence, low efficiency, and severe side effects. In this context, nanomaterial-based photothermal therapy (PTT) has attracted extensive research attention. This paper reviews the latest progress in the application of biological nanomaterials for PTT in OSCC. We divide photothermal nanomaterials into four categories (noble metal nanomaterials, carbon-based nanomaterials, metal compounds, and organic nanomaterials) and introduce each category in detail. We also mention in detail the drug delivery systems for PTT of OSCC and briefly summarize the applications of hydrogels, liposomes, and micelles. Finally, we note the challenges faced by the clinical application of PTT nanomaterials and the possibility of further improvement, providing direction for the future research of PTT in OSCC treatment.
Asunto(s)
Carcinoma de Células Escamosas , Neoplasias de Cabeza y Cuello , Neoplasias de la Boca , Nanoestructuras , Neoplasias , Carbono , Carcinoma de Células Escamosas/terapia , Neoplasias de Cabeza y Cuello/terapia , Humanos , Hidrogeles , Liposomas , Micelas , Neoplasias de la Boca/terapia , Nanoestructuras/uso terapéutico , Neoplasias/terapia , Terapia Fototérmica , Carcinoma de Células Escamosas de Cabeza y Cuello/terapiaRESUMEN
AIMS: This open-label, phase I study evaluated the pharmacokinetics and safety of pegylated recombinant human granulocyte colony-stimulating factor (PEG-rhG-CSF) for the treatment of chemotherapy-induced neutropenia in children with acute leukaemia. METHODS: PEG-rhG-CSF was administered as a single 100 mcg/kg (3 mg maximum dose) subcutaneous injection at the end of each chemotherapy period when neutropenia occurred. Blood samples were obtained from patients treated with PEG-rhG-CSF. PEG-rhG-CSF serum concentrations were determined by an enzyme-linked immunosorbent assay. Population pharmacokinetic (PPK) analysis was implemented using the nonlinear mixed-effects model. Short-term safety was evaluated through adverse events collection (registered at clinicaltrials.gov identifier: 03844360). RESULTS: A total of 16 acute leukaemia patients (1.8-13.6 years) were included, of whom two (12.5%) had grade 3 neutropenia, six (37.5%) had grade 4 neutropenia, and eight (50.0%) had severe neutropenia. For PPK modelling, 64 PEG-rhG-CSF serum concentrations were obtainable. A one-compartment model with first-order elimination was used for pharmacokinetic data modelling. The current weight was a significant covariate. The median (range) of clearance (CL) and area under the serum concentration-time curve (AUC) were 5.65 (1.49-14.45) mL/h/kg and 16514.75 (6632.45-54423.30) ng·h/mL, respectively. Bone pain, pyrexia, anaphylaxis and nephrotoxicity were not observed. One patient died 13 days after administration, and the objective assessment of causality was that an association with PEG-rhG-CSF was "possible". CONCLUSIONS: The AUC of PEG-rhG-CSF (100 mcg/kg, 3 mg maximum dose) in paediatric patients with acute leukaemia were similar to those of PEG-rhG-CSF (100 mcg/kg) in children with sarcoma. PEG-rhG-CSF is safe, representing an important therapeutic option for chemotherapy-induced neutropenia in paediatric patients with acute leukaemia.
Asunto(s)
Leucemia Mieloide Aguda , Neutropenia , Niño , Factor Estimulante de Colonias de Granulocitos/efectos adversos , Humanos , Leucemia Mieloide Aguda/tratamiento farmacológico , Neutropenia/inducido químicamente , Polietilenglicoles/efectos adversos , Proteínas RecombinantesRESUMEN
OBJECTIVES: This study presents a retrospective study aimed to analyze the facial features at each stage of surgical-orthodontic treatment for skeletal class III malocclusion, and predict the changes in the lips after treatment. MATERIALS AND METHODS: There were 49 skeletal class III malocclusion patients treated with bimaxillary surgery and orthodontic treatment enrolled in this study. Lateral cephalograms were obtained before treatment (T0), 1 month before surgery (T1), 1 month after surgery (T2), and after debonding (T3) for cephalometric measurements. After the measurement of the required variables, paired t-test, Pearson's correlation analysis, and multiple linear regression were performed using SPSS 19.0. RESULTS: The main factors associated with changes in the upper lip included ΔUIE-V, ΔA-V, ΔU1A-V, and ΔL1A-V, and those associated with changes in the lower lip included ΔLIE-V, ΔL1A-V, ΔB-V, ΔPog-V, and Δfacial angle. The predicted regression equation for the horizontal change in the upper lip was represented as ΔUL-vertical reference line (VRL) = 9.430 + 0.779 (ΔUIE-VRL) - 0.542(VULT) (P < 0.05) with a mean error of 1.04 mm; the corresponding equation for the lower lip was ΔLL-VRL = -1.670 + 0.530 (ΔB-VRL) + 0.360 (Ls-E) + 0.393 (ΔLIE-VRL) (P < 0.05), with a mean error of 1.51 mm. CONCLUSIONS: This study explored the relationship between orthognathic surgery and changes in the lips and obtained the predictive equations of lip position after treatment by using multiple linear regression, which likely offers a reference for prediction of soft tissue changes before surgical-orthodontic treatment in patients with skeletal class III malocclusion. CLINICAL RELEVANCE: The findings can help dentists to rapidly predict the lip changes after surgical-orthodontic treatment in patients with skeletal class III malocclusion. The study has been registered with the Chinese Clinical Trial Registration (No: ChiCTR1800017694).
Asunto(s)
Labio , Maloclusión de Angle Clase III , Adulto , Cefalometría , Humanos , Maloclusión de Angle Clase III/cirugía , Mandíbula , Maxilar , Estudios RetrospectivosRESUMEN
BACKGROUND: Growth and development might lead to anchorage loss during orthodontic treatment, such as the mesial drift of molars, the compensation characteristics of upper molars following mandibular growth, or the angulation of molars before treatment. Different anchorage reinforcement devices have been developed to prevent mechanical anchorage loss, but the anchorage loss resulting from physiological factors should also be taken into account. OBJECTIVE: To explore the efficacy of a new strategy to control physiologic anchorage compared with that of the conventional straight-wire appliance. TRIAL DESIGN: Randomized controlled trial (RCT). METHODS: Participants of Han ethnicity were randomized into the physiologic anchorage spee-wire system (PASS) group or McLaughlin-Bennett-Trevisi (MBT™) straight-wire group by minimization random allocation. The eligibility criteria were patients with a Class I or II molar relationship, permanent dentition (11-35 years old), fixed appliances involving the extraction of at least two upper first premolars, and medium or maximum anchorage requirements. Pre-treatment and post-treatment dental casts were scanned into digital casts and measured using a blinded method. Mesial displacements of the upper first molars were considered as the primary outcome for evaluating anchorage control. Measurements were taken for subgroups based on age. RESULTS: Data from 60 participants were analysed. The baseline characteristics were not significantly different between groups. Mesial displacement of the upper first molar (in mm) was 2.96 ± 1.52 in the PASS group and 2.70 ± 1.66 in the MBT group (P = 0.521). The variation in incisor torque was -6.94 ± 6.35 degree in the PASS group and -11.76 ± 7.65 degree in the MBT group (P = 0. 010). The incisor retraction (in mm) was 4.24 ± 1.99 and 5.67 ± 2.27 in the PASS and MBT groups, respectively (P = 0.012). Adverse effects were not documented in any patient. LIMITATION: The study was a single-centre study. CONCLUSIONS: Compared with the MBT group, the PASS group without additional anchorage devices could attain well anchorage control by considering the dentoalveolar compensation of anchor teeth. REGISTRATION: This RCT was registered at the Chinese Clinical Trial Registry (Chictr.org.cn) ChiCTR-TRC-13003260.
Asunto(s)
Métodos de Anclaje en Ortodoncia , Adolescente , Adulto , Diente Premolar , Cefalometría , Niño , Humanos , Mandíbula , Maxilar , Diente Molar , Diseño de Aparato Ortodóncico , Técnicas de Movimiento Dental , Adulto JovenRESUMEN
Objective To compare the efficacy and safety of cyclosporin A(CsA)and CsA combined with recombined human erythropoietin(rhEPO)in the treatment of patients with chronic aplastic anemia(CAA).Methods Data of 79 patients with CAA treated at Department of Hematology,PUMC Hospital between January 2016 and June 2018 were collected for retrospective analysis.Forty-five patients were treated with CsA+rhEPO,and the other 34 patients with CsA alone.All the enrolled patients were treated for at least 1.5-2.0 years and followed for at least 1.0 year.The efficacy,side effects,long-term outcomes were compared between the two groups,and factors that may influence the efficacy were analyzed.Results The patients treated with CsA+rhEPO included 14 males and 31 females,with a median age of 43(19,73)years old.The median treatment duration of CsA and rhEPO was 26(12,38)and 4(3,6)months,respectively,and the median followed-up time was 24(12,42)months.The patients treated with CsA alone included 16 males and 18 females,with a median age of 36(16,85)years old.The median CsA treatment duration was 24(12,40)months and the median follow-up time was 25(12,40)months.There was no statistical difference in baseline characteristics between the two groups(all P>0.05).After 6 months of treatment,CsA+rhEPO group had higher overall response(OR)rate(55.6% vs. 31.3%;χ 2=4.456,P=0.040)and partial response(PR)rate(53.3% vs. 25.0%;χ2=6.181,P=0.019)than CsA group,and the complete response(CR)rate showed no statistical difference between the two groups(2.2% vs. 6.3%;χ2=0.810,P=0.567).The CR,PR,and OR rates showed no statistical difference between the two groups after 3 and 12 months of treatment and at the end of follow-up(all P>0.05).Similarly,the hemoglobin level at the sixth month of treatment with CsA+rhEPO was higher than that with CsA alone [(102.6±24.0)g/L vs.(90.3±29.1)g/L;t=2.017,P=0.047].However,it showed no significant difference between the two groups at other time points(all P>0.05).The side effects,including an increase in serum creatinine,slight increase in bilirubin,increase in aminotransferase,mild to moderate gingival hyperplasia,gastrointestinal reaction,and muscular fibrillation,had no significant differences between the two groups(all P>0.05),except that 11.1%(5/45)patients in the CsA+rhEPO group reported soreness at the injection site.The two groups showed similar rates of clonal revolution during the follow-up period and no death.No clinical factor was found for prediction of the efficacy of CsA+rhEPO. Conclusion CsA+rhEPO has higher OR rate and hemoglobin level than CsA alone at the sixth month of treatment,and it has similar side effects compared with CsA alone.