The underlying molecular mechanisms and biomarkers between periodontitis and COVID-19.

OBJECTIVE: Emerging evidence shows the clinical consequences of patient with COVID-19 and periodontitis are not promising, and periodontitis is a risk factor. Periodontitis and COVID-19 probably have a relationship. Hence, this study aimed to identify the common molecular mechanism that may help to devise potential therapeutic strategies in the future. MATERIAL AND METHODS: We analyzed two RNA-seq datasets for differential expressed genes, enrichment of biological processes, transcription factors (TFs) and deconvolution-based immune cell types in periodontitis, COVID-19 and healthy controls. Relationships between TFs and mRNA were established by Pearson correlation analysis, and the common TFs-mRNA regulatory network and nine co-upregulated TFs of the two diseases was obtained. The RT-PCR detected the TFs. RESULTS: A total of 1616 and 10201 differentially expressed gene (DEGs) from periodontitis and COVID-19 are found. Moreover, nine shared TFs and common biological processes associated with lymphocyte activation involved in immune response were identified across periodontitis and COVID-19. The cell type enrichment revealed elevated plasma cells among two diseases. The RT-PCR further confirmed the nine TFs up-regulation in periodontitis. CONCLUSION: The pathogenesis of periodontitis and COVID-19 is closely related to the expression of TFs and lymphocyte activation, which can provide potential targets for treatment.

A novel coping design to decrease maximum principal stress in zirconia ceramic restorations.

PURPOSE: The objective of this study was to evaluate the influence of coping design modifications on maximum first principal stress (MPS) in a mathematical zirconia ceramic crown model. MATERIALS AND METHODS: For a nonlinear, 3D finite element analysis, a simplified tooth model was built on the basis of the average dimensions of mandibular second molars. Virtual tooth reduction was performed to model an abutment with a flat occlusal surface and 16° convergence angle between facing walls. The cement layer was set to a thickness of 100 µm. Three different copings-one with 0.5-mm constant thickness; one with constant thickness and extended lingual and proximal collars; and a novel design with zirconia beam reinforcement-were designed to simulate zirconia ceramic restorations. The novel design had strategically positioned zirconia beams on the lingual and marginal ridges to protect veneer ceramics, and was divided into three subdesigns according to the width of the zirconia beam (0.5, 0.8, and 1 mm). Combinations of vertical and horizontal load were applied over the distolingual marginal ridge, and the MPSs were evaluated. RESULTS: The novel design showed the lowest MPS in veneer ceramics under most loading conditions. The only exception to this was the novel design with a 0.5-mm zirconia beam width under mesial horizontal load. CONCLUSIONS: Compared to constant thickness coping with or without extended collars, the novel coping design reduced MPS in veneer ceramics; however, narrow zirconia beams should be avoided to prevent elevations in MPS in veneer ceramic layers.

No genetic causal association between periodontitis and ankylosing spondylitis: a bidirectional two-sample mendelian randomization analysis.

BACKGROUND: Observational studies that reveal an association between periodontitis (PD) and ankylosing spondylitis (AS) exist. However, observational research is prone to reverse causality and confounding factors, which make it challenging to infer cause-and-effect relationships. We conducted a two-sample Mendelian randomization (MR) study to examine the causal relationship between the genetic prediction of PD and AS. METHODS: In our study, single-nucleotide polymorphisms (SNPs) were defined as instrumental variables (IVs). The genetic association with PD came from the Gene-Lifestyle Interactions and Dental Endpoints (GLIDE) consortium, wherein 17353 cases of European ancestry and 28210 controls of European ancestry were included in this study. The genetic association with AS from the Neale Laboratory Consortium included 337,159 individuals from the United Kingdom, with 968 cases and 336,191 controls. MR analysis was mainly performed using the inverse-variance weighted (IVW) method. In addition, the robustness of the study findings was assessed using sensitivity, pleiotropy, and heterogeneity analyses. RESULTS: Eighteen independent SNPs with P-values significantly smaller than 1 × 10- 5 were used as IV SNPs for PD, while 39 independent SNPs with P-values significantly smaller than 1 × 10- 5 were used as IV SNPs for AS. The results of the IVW method revealed no causal association between PD and AS (odds ratio = 1.00, 95% confidence interval: 0.99953 to 1.00067, P = 0.72). The MR-Egger method did not support the causal association between PD and AS. It is unlikely that horizontal pleiotropy distorts causal estimates based on sensitivity analysis. No significant heterogeneity was observed in the Q test. The ''leave-one-out'' analysis demonstrated that the robustness of our results was unaffected by eliminating any of the IVs. Likewise, no significant causative effect for AS on PD was observed in the inverse MR analysis. CONCLUSIONS: The study results do not support shared heritability or a causal association between PD and AS.

Lignin microcapsules prepared on the basis of flexible skeleton with high foliar retention and UV shielding properties.

Lignin-based microcapsules are extremely attractive for their biodegradability and photolysis resistance. However, the water-soluble all-lignin shells were unsatisfactory in terms of rainfall and foliar retention, and lacked the test of agricultural production practices. Herein, a novel microcapsule based on a flexible skeleton formed by interfacial polymerization and absorbed with lignin particles (LPMCs) was prepared in this study. Further analysis demonstrated that the shell was formed by cross-linking the two materials in layers and showed excellent flexibility and photolysis resistance. The pesticide loaded LPMCs showed about 98.68 % and 73.00 % improvement in scour resistance and photolysis resistance, respectively, as compared to the bare active ingredient. The foliar retention performance of LPMCs was tested in peanut plantations during the rainy season. LPMCs loaded with pyraclostrobin (Pyr) and tebuconazole (Teb) exhibited the best foliar disease control and optimum plant architecture, resulting in an increase in yield of about 5.36 %. LPMCs have a promising application prospect in the efficient pesticide utilization, by controlling its deformation, adhesion and release, an effective strategy for controlling diseases and managing plant growth was developed.

Immediate Implant Placement With or Without Immediate Provisionalization in the Maxillary Esthetic Zone: A Systematic Review and Meta-analysis.

PURPOSE: To determine whether immediate implant placement and loading renders different outcomes from delayed loading with respect to midfacial mucosal level in the maxillary esthetic area. MATERIALS AND METHODS: A literature search was conducted in four electronic databases (PubMed, Web of Science, Embase, and Cochrane), identifying eligible clinical studies published prior to December 2021. Only randomized controlled trials (RCTs) comparing immediate implant placement with or without immediate loading in the maxillary esthetic zone with a mean follow-up of at least 12 months were selected for qualitative analysis and meta-analysis. The Cochrane Risk of Bias tool was adopted to assess the quality of the evidence. The heterogeneity between the pooled literature was analyzed through the chi-square test (P < .05) and quantified by the I2 index. A mixed-effects model was applied if it appeared that there was noteworthy heterogeneity; otherwise, a random-effects model was chosen. For continuous outcomes, the estimate of relative effect was presented to display the standardized mean differences (SMDs) and 95% CIs. For dichotomous variables, the Mantel-Haenszel statistical method was applied with effect sizes expressed as risk ratios (RRs) and 95% CIs. This study is registered on PROSPERO with number CRD42017078611. RESULTS: Out of 5,553 records, 8 RCTs were involved, providing data for 324 immediately placed implants (immediate implants subjected to immediate loading [IPIL]: 163; immediate implants subjected to delayed loading [IPDL]: 161) that had been in function within 12 to 60 months. Meta-analyses revealed significantly lower midfacial mucosal level changes for IPIL compared with IPDL, pointing to 0.48 mm (95% CI: -0.84 to -0.12; P = .01), as well as more significant papillary recession after IPDL (SMD -0.16; 95% CI: -0.31 to 0.00; P = .04). The differences regarding implant survival and marginal bone loss between the two loading groups showed no statistical significance. The result of metaanalyses revealed similar plaque score (SMD 0.03; 95% CI: -0.22 to 0.29; P = .79) and probing depth (SMD -0.09; 95% CI: -0.23 to 0.05; P = .21) for IPIL and IPDL. On the other hand, IPIL induced a trend toward more bleeding on probing (SMD 0.22; 95% CI: 0.01 to 0.42; P = .04) and less change in facial ridge dimension (SMD 0.94; 95% CI: -1.49 to -0.39; P < .01). CONCLUSION: After a follow-up ranging from 12 to 60 months, midfacial mucosa level change was 0.48 mm lower following IPIL compared with IPDL. Immediate implant placement and loading is conducive to the preservation of physiologic soft and hard tissue architecture, appearing to offer considerable benefits in the anterior zone. In summary, IPIL should be considered in the esthetic zone if the primary implant stability permits. Int J Oral Maxillofac Implants 2023;38:422-434. doi: 10.11607/jomi.10112.

Deciphering genetic causality between inflammatory bowel disease and periodontitis through bi-directional two-sample Mendelian randomization.

Inflammatory bowel disease (IBD) and periodontitis are reported to be closely associated; however, whether there is a causal association between them remains unclear. To explore the existence of this causality, this study applied a bidirectional two-sample Mendelian randomization (MR). The genetic variants were obtained from the summary statistics of genome-wide association studies of IBD, including its subtypes CD and UC, and periodontitis. 175, 148, 113, and six single-nucleotide polymorphisms were selected as instrumental variables for IBD, CD, UC, and periodontitis, respectively. In MR analysis, random-effects inverse-variance weighted was used as the primary method, and weighted median and MR Egger regression were applied as the complementary method. A series of sensitivity analyses were also conducted to ensure the reliability of the results. None of these analyses found a significant effect of genetically proxied IBD and its subtypes on periodontitis, and vice versa. Subsequent sensitivity analyses did not detect any horizontal pleiotropy and heterogeneity. Caution should be exerted when it comes to clinical relevance and further studies are needed to clarify the relationship between IBD and periodontitis.

The relationship between labial soft tissue changes and jumping spaces after immediate implant placement and restoration in the anterior maxilla: A prospective study.

Oral implants have been increasingly used in the treatment of edentulous patients or those with dentition defects due to reliable treatment procedure and favorable long-term prognosis. We investigated the changes of labial soft tissue contours with different jumping spaces after immediate implant placement and restoration (IIPR) in the maxillary esthetic area and also provided a long-term stability measurement for the changing trend of soft tissue contour. All patients had been separated into three groups based on the jumping space: group A (horizontal defect dimension [HDD] 2 mm), group B (2 mm < HDD 3 mm), and group C (HDD > 3 mm) and the digital impressions were obtained in the first, third, and sixth month after the operation. The changes of gingival mucosa levels, the average thickness of soft tissue contour volume, and the linear change of submarginal level decreased gradually across the three groups, with the largest change of submarginal level being at 5mm. The size of the jumping space was moderately negatively correlated with the level and average thickness of gingival mucosa and the linear changes of 3 mm and 5 mm under gingival margin, while there was no significant correlation with pink esthetic score (PES) and the linear change of the 1 mm under the gingival margin. Generally, IIPR of upper anterior teeth can achieve esthetic satisfaction, and the level of soft tissue around the implant can be well preserved.

Isolation and Identification of Adipose Stem Cell Exosomes and the Study of Its Potential as Drug Delivery Carrier In Vitro.

Most small molecule anticancer drugs have high lipophilicity and low water solubility, which is often regarded as a key obstacle to their development and clinical applications. A variety of nano-size drug carriers, like liposomes, has been developed for solubilizing these drugs. Naturally secreted by cells, exosomes have good biocompatibility and are considered as "natural liposomes." Exosomes released by mesenchymal stem cells (MSCs) not only have the properties like the ones generated by other cells but may also possess many therapeutic bioactive factors uniquely secreted by stem cells. In the present study, exosomes secreted by murine adipose stem cells (mASCs) were isolated, identified, and characterized. Its potential as drug delivery carrier and its biological effects on hepatoma cells and normal liver cell lines were explored in vitro. The data indicated that mASC exosomes separated by our improved sequential filtration method have particle size distribution in 30-150 nm, positively expresses TSG101, CD63, CD9, GADPH, and negatively expresses calnexin. The exosomes of mASCs obtained by this method could be taken up by cells and inhibit the cell activity of hepatoma cells HepG2, while enhance the normal cell activity of THLE-2. The results suggest that ASC exosomes are ideal potential drug delivery carriers and have the prospect of applications in carcinoma treatments.

Morphology of the cross section of silica layer in rice husk.

The physical adsorption of nitrogen and gas flow experiments on the silica layer in rice husk indicated that an existence of nano meter sized through holes. In this study, the external shape of the holes on the cross section of the layer was investigated with a scanning electron microscope equipped with an energy dispersive spectrometer, an atomic force microscope and scanning tunneling microscope. In the energy dispersive mapping image, 2-5 micron thick silica layer under outer cellulose layer, silica nano particles in the middle cellulose layer and sub micron silica layer in inner cellulose layer were observed. The cross section of the layer showed 20 nm building units with approximately 100 nm convexities. The atomic force microscopic image also showed the approximately 100 nm convexities as well as a roughness of approximately 20 nm. When osmium was coated on the silica layer, the wells with 2 approximately 5 nm horizontal and approximately 2 nm vertical lengths were observed on the plate surface in scanning tunneling microscopic image. From the results, it was suggested that the holes in the rice husk silica layer are almost straight and not zigzag spaces originated from the simple packing of nano particles.

Accuracy of implant impressions without impression copings: a three-dimensional analysis.

STATEMENT OF PROBLEM: Implant impressions without impression copings can be used for cement-retained implant restorations. A comparison of the accuracy of implant impressions with and without impression copings is needed. PURPOSE: The purpose of this study was to evaluate and compare the dimensional accuracy of implant definitive casts that are fabricated by implant impressions with and without impression copings. MATERIAL AND METHODS: An acrylic resin maxillary model was fabricated, and 3 implant replicas were secured in the right second premolar, first, and second molars. Two impression techniques were used to fabricate definitive casts (n=10). For the coping group (Group C), open tray impression copings were used for the final impressions. For the no-coping group (Group NC), cementable abutments were connected to the implant replicas, and final impressions were made assuming the abutments were prepared teeth. Computerized calculation of the centroids and long axes of the implant or stone abutment replicas was performed. The Mann-Whitney U test analyzed the amount of linear and rotational distortion between groups (α =.05). RESULTS: At the first molar site, Group NC showed significantly greater linear distortion along the Y-axis, with a small difference between the groups (Group C, 7.8 ± 7.4 µm; Group NC, 19.5 ± 12.2). At the second molar site, increased distortion was noted in Group NC for every linear and rotational variable, except for linear distortion along the Z-axis. CONCLUSIONS: Implant impression with open tray impression copings produced more accurate definitive casts than those fabricated without impression copings, especially those with greater inter-abutment distance.

Influence of transmucosal designs of three one-piece implant systems on early tissue responses: a histometric study in beagle dogs.

PURPOSE: The purpose of this study was to investigate the early tissue response around three one-piece implant systems with different transmucosal designs. MATERIALS AND METHODS: Three one-piece dental implant systems with different profiles and surface roughnesses on the transmucosal portion were examined in the current study. The transmucosal portions were flared and machined (FM), concave and machined with microgrooves (CMG), or straight and anodic oxidized (SA). A total of 30 implants (10 of each type) were placed in computer-generated randomized order in the mandibular residual ridges of five beagle dogs. Six months later, all animals were sacrificed and histologic sections were prepared to measure epithelial tissue height, connective tissue contact, and the amount of bone resorption. One-way analysis of variance and the Bonferroni post hoc test were used for statistical evaluation (alpha = 95%). RESULTS: After a 6-month nonfunctional loading period, all 30 implants were clinically immobile. Slight swelling and redness of the peri-implant soft tissue were noticed around most of the implant abutments. Histometric analysis showed that the FM implants had a longer epithelial tissue height than the CMG implants. The CMG implants showed the greatest amount of connective tissue attachment among the three groups and the least amount of marginal bone resorption. The CMG and SA implants showed bone growth above the initial reference point at 10 and 7 measurement sites, respectively, whereas no bone overgrowth was noted around the FM implants. CONCLUSION: Based on this study conducted in five beagle dogs, a concave transmucosal profile with a microgrooved surface was associated with longer connective tissue attachments and less bone resorption versus implants that were flared with a machined surface or straight with an anodic oxidized surface in the early healing phase. Int J Oral Maxillofac Implants 2010;25:309-314.

The microtomographic evaluation of marginal bone resorption of immediately loaded scalloped design implant with various microthread configurations in canine mandible: pilot study.

This study was undertaken to evaluate the effect of microthread geometry of scalloped design implant on marginal bone resorption. Four types of scalloped design titanium implant specimens were prepared. The type 1 implant had a machined scalloped collar, type 2 had a sandblasted and acid-etched scalloped collar, type 3 had horizontal microthreads, and type 4 had parabolic microthreads, which are parallel with the scalloped conical margin. Two implants of a type were randomly installed immediately after extraction in the mandible of a beagle dog. Definitive prostheses were delivered immediately after surgery. After 12 weeks of healing, the dog was sacrificed and microtomography was performed. Type 4 specimens showed a marginal bone loss pattern definitively analogous to the scalloped margin. In this preliminary study, microthread geometry affected the marginal bone resorption pattern of scalloped design implants. However, additional specimens and more controlled conditions should be applied in future studies to confirm these results.

Healing response of cortical and cancellous bone around titanium implants.

PURPOSE: The purpose of this study was to evaluate differences in the healing of cortical and cancellous bone around titanium implants with two different surfaces (machined or anodized) in rabbit tibiae. MATERIALS AND METHODS: Screw-shaped commercially pure titanium implants of two different surface types were fabricated: machined implants (control) and anodized implants; each had two transverse canals that served as sites for bone ingrowth. In the tibiae of six New Zealand white rabbits, a total of 24 implants (12 implants of each surface) were surgically placed in a randomized arrangement. The upper transverse canal was positioned in the cortical bone region, and the lower transverse canal was positioned in the cancellous bone region. After a 1-month healing period, undecalcified ground sections were subjected to histologic and histomorphometric analyses. A mixed-model analysis of variance was used to compare the two types of implants and to control for the random effect of animals. RESULTS: The percentage of bone-to-implant contact (BIC) inside the upper canals was 16.45% +/- 4.05% for controls (machined surface) and 24.85% +/- 4.86% for anodized implants. BIC inside the lower canals was 7.01% +/- 2.34% for controls and 11.35% +/- 2.67% for anodized implants. The percentage of bone area inside the upper canals was 10.94% +/- 4.06% for controls and 27.95% +/- 12.38% for anodized implants. The percentage of bone area inside the lower canals was 3.16% +/- 1.08% for controls and 4.66% +/- 1.53% for anodized implants. For all measures, the anodized implants had higher values than the controls (P < .0001). CONCLUSION: The results suggest that anodized surface modification of titanium implants is beneficial to both cortical and cancellous bone healing.

Regenerated Bone Pattern Around Exposed Implants with Various Designs.

PURPOSE: The design and surface features of dental implants substantially affect the healing and remodeling of adjacent bones. This study aimed to investigate the impact of design and surface on bone regeneration using implants of two different pitches, each with three different surface features. MATERIALS AND METHODS: Custom-manufactured titanium implants (length, 10 mm; diameter, 3.5 mm) were divided along the major axis into two sections: one with 0.6-mm pitch and the other with 0.4-mm pitch. They were processed by turned, blasting and etching, and anodic oxidation surface treatments and implanted into rabbit tibia. The upper 4 mm of the inserted implants was exposed, and bone regeneration was induced around the exposed area using a titanium chamber (height: 4 mm) containing particulate autogenous and bovine bone. After a 12-week healing period, the quantity and quality of bone regeneration around the implants were evaluated. Thirty specimens-10 specimens each from the turned, blasting and etching, and anodic oxidation surface groups with 0.6- and 0.4-mm pitch sizes- were evaluated by histomophometric analysis. RESULTS: The vertical height and width of regenerated bone around blasting and etching and anodic oxidation surfaces were significantly greater than those around turned implants (P < .05); the vertical heights of regenerated bone around the 0.4-mm-pitch sections of blasting and etching and anodic oxidation surfaces were significantly greater than those around the 0.6-mm-pitch sections (P < .05). Both blasting and etching and anodic oxidation surfaces exhibited significantly greater bone-to-implant contact and bone volume at the implant thread than turned implants (P < .05). However, there was no significant difference between the 0.6- and 0.4-mm-pitch sections. CONCLUSION: The findings of this study indicate that blasting and etching and anodic oxidation surfaces with a 0.4-mm-pitch design result in greater vertical ingrowth of regenerated bone than those with a 0.6-mm-pitch design.

De novo assembly, characterization and annotation for the transcriptome of Sphaeroma terebrans and microsatellite marker discovery.

Sphaeroma terebrans, an economically and ecologically important marine wood-boring isopod, is mainly distributed in tropical and subtropical mangroves. Nevertheless, available genomic and transcriptomic information for this isopod is extremely deficient. Here, we first performed the assembly of S. terebrans transcriptome by Illumina sequencing. A total of 51,092 high-quality unigenes with an average length of 641 bp were obtained and 19,915 unigenes were successfully annotated in four public databases. Only 9932 out of 19915 unigenes were commonly annotated by all four databases. In addition, 9609 unigenes were categorized into 54 function categories of Gene Ontology (GO), and 14,512 unigenes were successfully grouped into 25 functional categories of the EuKaryotic Orthologous Groups (KOG) database. Moreover, 11,507 unigenes were assigned to 228 pathways of the Kyoto Encyclopedia of Genes and Genomes (KEGG). Out of 51,092 unigenes, a total of 4257 different microsatellites with motifs range from di- to hexa-nucleotide were identified from 3324 unigene sequences. Among 64 primer pairs selected for validation, 35 were successful in PCR amplification and 13 exhibited obvious repeat polymorphisms in the wild population of S. terebrans in Dongzhaigang (Hainan Island). The transcriptome dataset and the identified microsatellite markers (SSRs) will provide abundant information for researches on the discovery of new genes, metabolic mechanism and genetic diversity of S. terebrans.

A study on electric conductivity of phosphoric acid supported on nano-pore rice husk silica in H2/Pt/H3PO4 / RHS/Pt/O2 fuel cells.

PEMFC (Polymer Electrolyte Membrane Fuel Cell) is widely considered as an energy conversion system from the chemical energy of hydrogen to electric energy. But, hydrogen fuel obtained from hydrocarbons has trace amount of carbon monoxide which is a potential poison for platinum electrode at the cell operating temperature approximately 100 degrees C and it becomes a huddle for the general usage of PEMFC. On the other hand PAFC (Phosphoric Acid Fuel Cell) operates at a higher temperature and the platinum electrode oxidizes carbon monoxide poison while there is a leakage problem of the liquid phase. To combine the advantages of two fuel cells, the electrolyte systems of phosphoric acid supported silica on ceramics are recently being tested. In this study, we investigated the nm pore rice husk silica as a support for phosphoric acid and tested the electric conductivity of the silica plate and the characteristics of a prototype fuel cell H2/Pt/H3PO4 / RHS/Pt/O2 at 100-200 degrees C. The conductivity of H3PO4/RHS was 8 mS cm(-1) above 175 degrees C under 200 torr H2O. In the fuel cell, the apparent conductance of the electrolyte from I-V characteristics was 2.45 mS/cm at 160 degrees C under 1 atm H2 and air at present.

Displacement of implant components from impressions to definitive casts.

PURPOSE: Four possible displacements of implant components from a patient model to a definitive cast were assessed to suggest a standard method of comparing the accuracies of implant impression techniques. MATERIALS AND METHODS: Two techniques for impression making were assessed: a nonsplinted open-tray technique and a light-curing resin splinted open-tray technique. A mandibular model with 5 parallel implants was fabricated. Five definitive casts were fabricated per technique. Using a computerized coordinate measuring machine, 5 part coordinate systems were established, and 7 sets of data were obtained for each sample. From the data, the amount of displacement while connecting components and the linear and angular displacement of components during impression making and cast fabrication were calculated. The Mann-Whitney test was used to determine significant differences between the impression techniques (P < .05). RESULTS: The average displacements while connecting impression copings and abutment replicas were 31.3 and 30.4 microm, respectively. Less displacement occurred in the nonsplinted group compared to the splinted group during impression making (P = .001) but greater displacement occurred in that group during definitive cast fabrication (P = .015). DISCUSSION: In contrast to previous studies, the current study excluded displacement resulting from component connection, because displacement from that source has no relation to impression technique and cannot be controlled. CONCLUSIONS: Connecting a component produced as great a displacement as that resulting solely from a impression or cast fabrication. The nonsplinted group was more accurate during impression making but less accurate during cast fabrication.

Influence of implant abutment type on stress distribution in bone under various loading conditions using finite element analysis.

PURPOSE: The purpose of this study was to investigate the effect of 3 different abutment types on the stress distribution in bone with inclined loads using finite element analysis. MATERIALS AND METHODS: The 1-body, internal-hex, and external-hex implant systems were modeled to study the effect of abutment type on stress distribution in bone. The bone model used in this study comprised compact and spongious bone assumed to be homogeneous, isotropic, and linearly elastic. RESULTS: In the case of the 1-piece implant, the load was transferred evenly not only in the implant system but also in bone. However, the maximum Von Mises stress generated in bone with the 1-piece implant was always higher than that generated with the internal-hex implant, regardless of load angle inclination. In the case of the internal-hex implant, the contact condition with friction between abutment and implant in the tapered joints and at abutment neck reduced the effect of bending caused by horizontal component of inclined load. The maximum Von Mises stress in bone was the highest for the external-hex implant. DISCUSSION: It was found that the internal-hex implant system generated the lowest maximum Von Mises stresses for all loading conditions because of reduction of the bending effect by sliding in the tapered joints between the implant and abutment. CONCLUSIONS: It was concluded that abutment type has significant influence on the stress distribution in bone because of different load transfer mechanisms and the differences in size of the contact area between the abutment and implant.

Radiographic evaluation of marginal bone level around implants with different neck designs after 1 year.

PURPOSE: To evaluate the influence of macro- and microstructure of the implant surface at the marginal bone level after functional loading. MATERIALS AND METHODS: Sixty-eight patients were randomly assigned to 1 of 3 groups. The first group received 35 implants with a machined neck (Ankylos); the second group, 34 implants with a rough-surfaced neck (Stage 1); and the third, 38 implants with a rough-surfaced neck with microthreads (Oneplant). Clinical and radiographic examinations were conducted at baseline (implant loading) and 3, 6, and 12 months postloading. Two-way repeated analysis of variance (ANOVA) was used to test the significance of marginal bone change of each tested group at baseline, 3, 6, and 12 month follow-ups and 1-way ANOVA was also used to compare the bone loss of each time interval within the same implant group (P < .05). RESULTS: At 12 months, significant differences were noted in the amount of alveolar bone loss recorded for the 3 groups (P < .05). The group with the rough-surfaced microthreaded neck had a mean crestal bone loss of 0.18 +/- 0.16 mm; the group with the rough-surfaced neck, 0.76 +/- 0.21 mm; and the group with the machined neck, 1.32 +/- 0.27 mm. In the rough-surfaced group and the rough-surfaced microthreaded group, no statistically significant changes were observed after 3 months, whereas the machined-surface group showed significant bone loss for every interval (P < .05). DISCUSSION: To minimize marginal bone loss, in addition to the use of a rough surface at the marginal bone level, a macroscopic modification such as the addition of microthreads could be recommended. A rough surface and microthreads at the implant neck not only reduce crestal bone loss but also help with early biomechanical adaptation against loading in comparison to the machined neck design. CONCLUSION: A rough surface with microthreads at the implant neck was the most effective design to maintain the marginal bone level against functional loading.

Osseointegration of anodized titanium implants coated with fibroblast growth factor-fibronectin (FGF-FN) fusion protein.

PURPOSE: The synergistic effect of fibroblast growth factor (FGF) and human fibronectin fragment (hFNIII9-10) on osteoblast cell adhesion has been demonstrated in vitro. The purpose of this study was to evaluate the bone response around anodized titanium implants treated with FGF-FN fusion protein using the histomorphometric analysis and the removal torque test. MATERIALS AND METHODS: Threaded implants were manufactured by machining a commercially pure titanium (grade 4). Two different groups of samples were prepared: Group 1 samples were anodized under a constant voltage of 300 V, and group 2 samples were anodized under a constant voltage of 300 V and then soaked in a solution containing fusion protein (65 microg/mL) for 24 hours. Ten implants from each group were placed in rabbit tibiae (1 implant per group per rabbit; each rabbit served as its own control). After a 3-month healing period, the animals were sacrificed. Removal torque testing and histomorphometric analysis was then carried out. RESULTS: The mean removal torque value of group 2 (44.8 Ncm) was greater than that of group 1 (37.6 Ncm). The percentages of bone-implant contact of the best 3 consecutive threads were 76.37% for group 1 and 88.02% for group 2. The percentage of bone-implant contact for the total length of the implant was higher for group 2 (36.91%) than for group 1 (29.47%). However, the percentage of the area inside the threads that consisted of bone did not differ significantly for the 2 groups. DISCUSSION AND CONCLUSION: This study demonstrated that the FGF-FN fusion protein coating on anodized implants may enhance osseointegration. However, the influence of fibronectin- and FGF-treated rough surfaces on long-term prognosis and the propagation of inflammation are subjects for further study.