A simple method to improve the antibiotic elution profiles from polymethylmethacrylate bone cement spacers by using rapid absorbable sutures.

OBJECTIVE: Antibiotic-loaded bone cement beads and spacers have been widely used for orthopaedic infection. Poor antibiotic elution is not capable of eradicating microbial pathogens and could lead to treatment failure. The elution profiles differ among different cement formulations. Although Simplex P cement has the least release amount, it is widely used due to its ready availability. Previous methods aiming to improve the elution profiles were not translated well to clinical practice. We sought to address this by using easily available materials to improve the elution profile of antibiotics from PMMA, which allows clinicians to implement the method intraoperatively. METHODS: Vancomycin was mixed with Simplex P cement. We used Vicryl Rapide sutures to fabricate sustained-release cement beads by repetitively passing the sutures through the beads and/or mixing suture segments into the cement formulation. Vancomycin elution was measured for 49 days. The mechanism of antibiotic release was observed with gross appearance and scanning electron microscopic images. The antimicrobial activities against MRSA were tested using an agar disk diffusion bioassay. RESULTS: Passing Vicryl Rapide sutures through cement beads significantly improved the elution profiles in the 7-week period. The increased ratios were 9.0% on the first day and 118.0% from the 2nd day to the 49th day. Addition of suture segments did not increase release amount. The Vicryl Rapide sutures completely degraded at the periphery and partially degraded at the center. The antibiotic particles were released around the suture, while antibiotic particles kept densely entrapped in the control group. The antimicrobial activities were stronger in passing suture groups. CONCLUSION: Passing fast absorbable sutures through PMMA cement is a feasible method to fabricate sustained-release antibiotic bone cement. Intra-cement tunnels can be formed, and the effect can last for at least 7 weeks. It is suitable for a temporary spacer between two stages of a revision surgery.

Biological properties of human periodontal ligament cell spheroids cultivated on chitosan and polyvinyl alcohol membranes.

BACKGROUND/PURPOSE: Multicellular spheroid cultures have attracted increasing attention in the field of periodontal regeneration. However, very few studies have reported the periodontal ligament (PDL) cell spheroid formation via biomaterials-induced processes. This study investigated the biological characteristics of human PDL cell spheroids formed on two hydrophilic polymer-based biomaterials, namely chitosan and polyvinyl alcohol. METHODS: The expressions of periostin, paxillin, hypoxia-inducible factor 1-α (HIF-1α), and vascular endothelial growth factor (VEGF) were analyzed. Cell migration ability was assessed using a scratch assay. Furthermore, PDL cell spheroids were cultured in 3D-printed polylactic acid scaffolds to evaluate mineralizing capability. RESULTS: Western blot analysis revealed increased expressions of periostin, HIF-1α, and VEGF in the 3D spheroids. After the spheroids were reseeded, the cells gradually migrated outward from the spheroids and time-dependent distribution of paxillin was observed. The cells migrating outward from the 3D spheroids demonstrated greater migration ability than that of 2D monolayer cells. Compared to the dissociated cells from a monolayer culture, the cell spheroids formed on the chitosan membrane exhibited elevated alkaline phosphatase activity and an increase in mineralized matrix deposition. CONCLUSION: The biomaterial-induced formation of PDL cell spheroids suggests a novel strategy for cell delivery in research and clinical applications of periodontal regeneration.

Advanced biomaterials for cancer immunotherapy.

Immunotherapy, as a powerful strategy for cancer treatment, has achieved tremendous efficacy in clinical trials. Despite these advancements, there is much to do in terms of enhancing therapeutic benefits and decreasing the side effects of cancer immunotherapy. Advanced nanobiomaterials, including liposomes, polymers, and silica, play a vital role in the codelivery of drugs and immunomodulators. These nanobiomaterial-based delivery systems could effectively promote antitumor immune responses and simultaneously reduce toxic adverse effects. Furthermore, nanobiomaterials may also combine with each other or with traditional drugs via different mechanisms, thus giving rise to more accurate and efficient tumor treatment. Here, an overview of the latest advancement in these nanobiomaterials used for cancer immunotherapy is given, describing outstanding systems, including lipid-based nanoparticles, polymer-based scaffolds or micelles, inorganic nanosystems, and others.

Aggregation of human dental pulp cells into 3D spheroids enhances their migration ability after reseeding.

Multicellular three-dimensional (3D) spheroids allow intimate cell-cell communication and cell-extracellular matrix interaction. Thus, 3D cell spheroids better mimic microenvironment in vivo than two-dimensional (2D) monolayer cultures. The purpose of this study was to evaluate the behaviors of human dental pulp cells (DPCs) cultured on chitosan and polyvinyl alcohol (PVA) membranes. The protein expression of hypoxia-inducible factor 1-α (HIF-1α) and vascular endothelial growth factor (VEGF), and the migration ability of the DPCs from 2D versus 3D environments were investigated. The results showed that both chitosan and PVA membranes support DPCs aggregation to form multicellular spheroids. In comparison to 2D cultures on tissue culture polystyrene, DPC spheroids exhibited higher protein expression of HIF-1α and VEGF. The treatment with YC-1 (inhibitor to HIF-1α) blocked the upregulation of VEGF, indicating a downstream event to HIF-1α expression. When DPC spheroids were collected and subjected to the transwell assay, the cells growing outward from 3D spheroids showed greater migration ability than those from 2D cultures. Moreover, DPCs aggregation and spheroid formation on chitosan membrane were abolished by Y-27632 (inhibitor to Rho-associated kinases), whereas the inhibitory effect did not exist on PVA membrane. This suggests that the mechanism regulating DPCs aggregation and spheroid formation on chitosan membrane is involved with the Rho-associated kinase signaling pathway. In summary, the multicellular spheroid structure was beneficial to the protein expression of HIF-1α and VEGF in DPCs and enhanced the migration ability of the cells climbing from spheroids. This study showed a new perspective in exploring novel strategies for DPC-based research and application.

Tumor-Targeting Anti-MicroRNA-155 Delivery Based on Biodegradable Poly(ester amine) and Hyaluronic Acid Shielding for Lung Cancer Therapy.

Anti-microRNA-155 (anti-miR-155), an oligonucleotide with a complimentary sequence to microRNA-155, holds great promise for lung cancer therapy, and thus some cationic materials have been used to deliver anti-miR-155 into lung tumors. Although the gene delivery capacity in vitro was favorable, the application in vivo was limited by rapid removal and significant cytotoxicity, which were mainly caused by the positive charge of the gene complexes. Therefore, it was necessary to develop a novel carrier to decrease the positive charge and increase the gene delivery capacity into the tumor site. In this paper, biodegradable poly(ester amine) (PEA) was used to condense anti-miR-155 into PEA/anti-miR-155 complexes, and natural anionic polysaccharide hyaluronic acid (HA) was modified with a lung tumor cell targeting peptide and then coated on the surface of gene complexes. The formed hyaluronic acid shielding, PEA/anti-miR-155/HA-peptide complexes were monodispersed, and the particle size and zeta potential were 362.7 nm and -10.17 mV, respectively. In addition, the PEA/anti-miR-155/HA-peptide complexes had good biocompatibility and stability in vitro, and the lung tumor growth inhibitions of PEA/anti-miR-155/HA-peptide in vitro and in vivo were also excellent. The PEA/anti-miR-155/HA-peptide complexes play an active role in tumor growth inhibition and could be useful for lung cancer therapy.

Biomimetic Hydrogels Incorporating Polymeric Cell-Adhesive Peptide To Promote the 3D Assembly of Tumoroids.

Toward the goal of establishing physiologically relevant in vitro tumor models, we synthesized and characterized a biomimetic hydrogel using thiolated hyaluronic acid (HA-SH) and an acrylated copolymer carrying multiple copies of cell adhesive peptide (PolyRGD-AC). PolyRGD-AC was derived from a random copolymer of tert-butyl methacrylate (tBMA) and oligomeric (ethylene glycol) methacrylate (OEGMA), synthesized via atom transfer radical polymerization (ATRP). Acid hydrolysis of tert-butyl moieties revealed the carboxylates, through which acrylate groups were installed. Partial modification of the acrylate groups with a cysteine-containing RGD peptide generated PolyRGD-AC. When PolyRGD-AC was mixed with HA-SH under physiological conditions, a macroscopic hydrogel with an average elastic modulus of 630 Pa was produced. LNCaP prostate cancer cells encapsulated in HA-PolyRGD gels as dispersed single cells formed multicellular tumoroids by day 4 and reached an average diameter of ∼95 µm by day 28. Cells in these structures were viable, formed cell-cell contacts through E-cadherin (E-CAD), and displayed cortical organization of F-actin. Compared with the control gels prepared using PolyRDG, multivalent presentation of the RGD signal in the HA matrix increased cellular metabolism, promoted the development of larger tumoroids, and enhanced the expression of E-CAD and integrins. Overall, hydrogels with multivalently immobilized RGD are a promising 3D culture platform for dissecting principles of tumorigenesis and for screening anticancer drugs.

A controlled light-induced gas-foaming porous hydrogel with adhesion property for infected wound healing.

Porous hydrogels as scaffolds have great potential in tissue engineering. However, there are still challenges in preparing porous hydrogels with tunable pore size and controlled porosity. Here, we successfully established a photoinduced gas-foaming method of porous hydrogels with controlled macro-micro-nano multiscale. A diazirine (DZ)-modified gelatin (GelDZ) biomaterial was prepared by introducing photocrosslinked DZ group into gelatin. Upon exposure to 365 nm UV light, DZ could be converted to the active group carbene, which could randomly insert into OH, NH, or CH bonds to form covalent crosslinks. GelDZ generated N2 by photodegradation and formed gas-induced porous hydrogels by intermolecular crosslinking without initiator. The loose porous structure of the hydrogel can promote the infiltration of host cells and blood vessels, which was conducive to tissue repair. The interfacial crosslinking of photoactivated GelDZ with tissue proteins imparted adhesion properties to the hydrogel. GelDZ also possessed photoreduction ability, which can reduce silver ions from metal precursors to silver nanoparticles (Ag NPs) in situ, and showed great antibacterial activity due to the sustained release of Ag NPs. GelDZ-Ag NPs prepared by in situ photoreaction can effectively inhibit wound infection and promote skin wound healing, providing a new strategy for designing porous hydrogel in tissue engineering.

RGD peptide modified platinum nanozyme Co-loaded glutathione-responsive prodrug nanoparticles for enhanced chemo-photodynamic bladder cancer therapy.

Bladder cancer is one of the most common malignant tumors in the urinary system worldwide. The poor permeability and uncontrollable release of drug and hypoxia of tumor tissues were the main reasons leading to poor therapeutic effect of chemo-photodynamic therapy for bladder cancer. To solve the above problems, a tumor-targeting peptide Arg-Gly-Asp (RGD) modified platinum nanozyme (PtNP) co-loaded glutathione (GSH)-responsive prodrug nanoparticles (PTX-SS-HPPH/Pt@RGD-NP) was constructed. Firstly, a GSH-responsive prodrug (PTX-SS-HPPH) was prepared by introducing a disulfide bond between paclitaxel (PTX) and photosensitizer 2-(1-hexyloxyethyl)-2-devinyl pyropheophorbide-a (HPPH), which could realize the GSH-responsive release of the drug at the tumor sites. Also, the distearoylphosphoethanolamine-poly (ethylene glycol)-RGD peptide (DSPE-PEG-RGD) modified the prodrug to enhance the targeting and permeability ability to bladder cancer cells. Besides, to alleviate the hypoxia of tumor tissues, PtNP was introduced to produce oxygen (O2) and improve photodynamic therapy efficiency. The results showed that the PTX-SS-HPPH/Pt@RGD-NP could achieve GSH-responsive drug release in tumor microenvironment, enhance the drug accumulation time and permeability at tumor sites in T24 subcutaneous tumor model and T24 orthotopic bladder tumor model, and alleviate hypoxia in tumor tissues, thus realizing enhanced chemo-photodynamic therapy for bladder cancer, and providing new strategies and methods for clinical treatment of bladder cancer.

Magnetic DNA vector constructed from PDMAEMA polycation and PEGylated brush-type polyanion with cross-linkable shell.

A novel magnetic-responsive complex composed of polycation, DNA, and polyanion has been constructed via electrostatic interaction. The magnetic nanoparticles (MNPs) were first coated with a polycation, poly[2-(dimethylamino)ethyl methacrylate] end-capped with cholesterol moiety (Chol-PDMAEMA(30)), and then binded with DNA through electrostatic interaction; the complexes were further interacted with the brush-type polyanion, namely poly[poly(ethylene glycol)methyl ether methacrylate]-block-poly[methacrylic acid carrying partial mercapto groups] (PPEGMA-b-PMAA(SH)). The resulting magnetic particle/DNA/polyion complexes could be stabilized by oxidizing the mercapto groups to form cross-linking shell with bridging disulfide (S-S) between PPEGMA-b-PMAA(SH) molecular chains. The interactions among DNA, Chol-PDMAEMA coated MNPs, and PPEGMA-b-PMAA(SH) were studied by agarose gel retardation assay. The complexes were fully characterized by means of zeta potential, transmission electron microscopy (TEM), dynamic light scattering (DLS) measurements, cytotoxicity assay, antinonspecific protein adsorption, and in vitro transfection tests. All these results indicate that this kind of magnetic-responsive complex has potential applications for gene vector.

Biomedical polymer scaffolds mimicking bone marrow niches to advance in vitro expansion of hematopoietic stem cells.

Hematopoietic stem cell (HSC) transplantation provides an effective platform for the treatment of hematological disorders. However, the donor shortage of HSCs and immune responses severely restrict the clinical applications of HSCs. Compared to allogeneic transplantation, autogenous transplantation poses less risk to the immune system, but the problem associated with insufficient HSCs remains a substantial challenge. A significant strategy for obtaining sufficient HSCs is to promote the expansion of HSCs. In vivo, a bone marrow microenvironment supports the survival and hematopoiesis of HSCs. Therefore, it is crucial to establish a platform that mimics the features of a bone marrow microenvironment for the in vitro expansion of HSCs. Three-dimensional (3D) scaffolds have emerged as the most powerful tools to mimic cellular microenvironments for the growth and proliferation of stem cells. Biomedical polymers have been widely utilized as cell scaffolds due to their advantageous features including favorable biocompatibility, biodegradability, as well as adjustable physical and chemical properties. This review focuses on recent advances in the study of biomedical polymer scaffolds that mimic bone marrow microenvironments for the in vitro expansion of HSCs. Bone marrow transplantation and microenvironments are first introduced. Then, biomedical polymer scaffolds for the expansion of HSCs and future prospects are summarized and discussed.

A Nested Case-Control Study of the Relationship between Salivary Inflammatory Mediators, Periodontal Parameters, and Preterm Birth in a Chinese Population.

Background: To explore whether salivary inflammatory mediators and periodontal indices at different gestational stages can be taken as indicators of preterm birth (PTB). Methods: This nested case-control study enrolled systemically healthy pregnant women at 9 to 36 weeks of gestation. Periodontal indices were measured at the enrollment date, and interleukin-1ß (IL-1ß), IL-6, tumor necrosis factor (TNF-α), prostaglandin E2 (PGE2), and 8-hydroxy-deoxyguanosine (8-OHdG) in the saliva were determined by enzyme-linked immunosorbent assay (ELISA). The birth outcome was recorded. Results: PTB occurred in 26 women. A total of 104 matched women with full-term birth (FTB) were used as controls. The PTB women enrolled at 24-28 gestational weeks displayed a significantly greater bleeding index (BI), probing pocket depth (PD), PD ≥ 4 mm sites (%), saliva-TNF-α, and saliva-PGE2 (P < 0.05). BI and PGE2 in the saliva were found to be positively associated with PTB (OR = 4.79, P = 0.048, 95%CI = 1.014 to 22.628; OR = 1.07, P = 0.04, 95%CI = 1.004 to 1.135, respectively). The areas under the receiver operating characteristic curve (ROC) of BI and saliva-PGE2 were 0.82 and 0.78, respectively, and that of the combined detection was 0.91, which was larger than either marker alone, although the differences were not significant (P > 0.05). Conclusions: The combination of BI and PGE2 in saliva at 24-28 gestational weeks could be a predictor of PTB in asymptomatic women. However, the results should be further explored with larger sample size.

Safety and efficacy of administering reduced doses of pegylated recombinant human granulocyte-colony stimulating factors in patients treated with cisplatin and etoposide for small cell carcinoma: A retrospective study.

BACKGROUND: The aim of this study was to discuss the safety and efficacy of administering reduced doses (3 mg) of pegylated recombinant human granulocyte-colony stimulating factor (PEG-rhG-CSF) at approximately 24 h or up to three days following treatment with etoposide and cisplatin (EP). METHODS: A total of 104 cycles from 31 patients were divided into a PEG-rhG-CSF prophylaxis group (PP-Group) and a control group (No-PP-Group). The PP-Group received a reduced dose of 3 mg of PEG-rhG-CSF within a minimum of 15 h and a maximum of 72 h following EP chemotherapy, while the rest did not receive any G-CSF prophylaxis (No-PP-Group). For both groups, complete blood counts, incidence of febrile neutropenia (FN), grade III or IV neutropenia, and the use of antibiotics to treat neutropenia were recorded. RESULTS: There was statistically no significant difference in the incidence of FN (0% vs. 1.4%, p = 1), antibiotic use due to neutropenia (0% vs. 2.7%, p = 0.881), estimated lowest mean marginal (EM) platelet (106.56 × 109 /L vs. 127.70 × 109 /L, p = 0.056) and hemoglobin (110.48 g/L vs. 110.14 g/L, p = 0.906) levels between the two groups. However, when compared with the No-PP-group, the white blood cell count in the PP-group was significantly higher (EM means: 4.95 × 109 /L vs. 2.80 × 109 /L, p < 0.01), while the incidence of grade III or IV neutropenia was significantly lower (9.1% vs. 68.1%, p < 0.01). CONCLUSIONS: The administration of a low dose (3 mg) of PEG-rhG-CSF within approximately 24 h or up to three days following EP treatment is safe and effective at reducing the risk of neutropenia. These findings bring a more flexible administration interval between PEG-rhG-CSF and EP treatment.

Injectable Soft Tissue Nano/Micro Fillers for Facial Reconstruction.

Soft Tissue augmentation is a way to restore lost tissue and also a way to reshape confidence for patients who suffer from soft tissue loss. Materials that can realize such a function are called soft tissue fillers. Among the large number of fillers, injectable fillers have attracted widespread attention in facial cosmetic fields due to their convenience and competitive performance. Meanwhile, there is a huge demand for better injectable soft tissue fillers in medical cosmetology market. This review introduces several fillers which were once used in clinical or are now still in use. Furthermore, we update recent improvements and progress on injectable filling materials hoping to contribute to its further developments.

Association between periodontal indexes and biomarkers in gingival crevicular fluid and preterm birth in pregnancy: a nested case-control study.

OBJECTIVES: This study aimed to investigate the association between periodontal indexes and biomarkers in gingival crevicular fluid (GCF) and preterm birth (PTB) in pregnancy, as well as to assess the clinical value of these indexes as predictors of PTB. METHODS: A nested case-control study was conducted. A total of 300 systematically healthy pregnant women were selected within 36 weeks of gestation and grouped according to the enrolled weeks. Periodontal indexes, including probing depth (PD), bleeding index (BI), gingival index (GI), and five biomarkers in GCF, including interleukin (IL)-1ß, IL-6, tumor necrosis factor-α (TNF-α), prostaglandin E2 (PGE2), and 8-hydroxy-2-deoxyguanosine (8-OHdG) were measured at the enrolled date. The detailed birth outcome was recorded. RESULTS: Only women at 24-28 weeks of gestation per PTB case (four full-term births) were selected as controls subjects, PTB displayed significantly greater GI, BI, and 8-OHdG (P<0.05). Logistic regression analysis revealed that BI and 8-OHdG were the dependent risk factors of PTB (OR=5.90, P=0.034; OR=1.18, P=0.045, respectively). The areas under the receiver operating characteristic curve (ROC) of BI and 8-OHdG were 0.80 and 0.69, and that of the combined detection was 0.82, which was larger than the individual detection, although the differences were not significant (P>0.05). CONCLUSIONS: Increased BI and 8-OHdG at 24-28 weeks of gestation are risk factors for PTB. Their combined detection may have some value in the prediction of PTB, but further studies with a larger sample size are needed to explore it and thus provide experiment evidence for establishing an early warning system for PTB in pregnant women with periodontal disease.

Characterization of genotype-phenotype correlation with MORC2 mutated Axonal Charcot-Marie-Tooth disease in a cohort of Chinese patients.

BACKGROUND: Charcot-Marie-Tooth (CMT) disease is an exciting field of study, with a growing number of causal genes and an expanding phenotypic spectrum. The microrchidia family CW-type zinc finger 2 gene (MORC2) was newly identified as a causative gene of CMT2Z in 2016. We aimed to describe the phenotypic-genetic spectrum of MORC2-related diseases in the Chinese population. METHODS: With the use of Sanger sequencing and Next Generation Sequencing (NGS) technologies, we screened a cohort of 284 unrelated Chinese CMT2 families. Pathogenicity assessments of MORC2 variants were interpreted according to the ACMG guidelines. Potential pathogenic variants were confirmed by Sanger sequencing. RESULTS: We identified 4 different heterozygous MORC2 mutations in four unrelated families, accounting for 1.4% (4/284). A novel mutation c.1397A>G p. D466G was detected in family 1 and all affected patients presented with later onset axonal CMT with hyperCKemia. The patient in family 2 showed a spinal muscular atrophy (SMA)-like disease with cerebellar hypoplasia and mental retardation, with a hot spot de novo mutation c.260C>T p. S87L. The twin sisters in family 3 were identified as having the most common mutation c.754C>T p. R252W and suffered from axonal motor neuropathy with high variability in disease severity and duration. The patient in family 4 developed an early onset axonal motor and sensory neuropathy, with a reported mutation c.1220G>A p.C407Y. All identified mutations associated with MORC2-related neuropathies are localized in the N-terminal ATPase module. CONCLUSIONS: Our study confirmed that MORC2-related neuropathies exist in the Chinese population at a relatively high mutation rate. We revealed a complex genotype-phenotype correlation with MORC2 mutations. This report adds a new piece to the puzzle of the genetics of CMT and contributes to a better understanding of the disease mechanisms.

Evaluation of prefabricated adjustable thermoplastic mandibular advancement devices (PAT-MADs) for obstructive sleep apnea: an Asian experience.

OBJECTIVE: To evaluate the use of direct to consumer Prefabricated adjustable thermoplastic mandibular advancement devices (PAT-MADs) (MyTAP™, Airway Management Inc), its effectiveness in the treatment of OSA, feasibility and short-term adherence. METHODS: In sum, 50 patients with diagnosed mild-moderate OSA on formal polysomnography (PSG) were fitted with a PAT-MAD (MyTAP™, Airway Management Inc). Sleep indices included the apnea-hypopnea index (AHI), hypopnea index (HI), apnea index (AI); oxygen desaturation index (ODI), and the lowest 02 saturation (Lsat) were measured with a Level 3 home sleep apnea test (HSAT) pre versus post treatment. Quality of life (QOL) surveys of Epworth sleepiness scale (ESS), Pittsburg sleep quality index (PSQI), Functional outcomes of sleep quality-10 (FOSQ10) and satisfaction surveys were administered. RESULTS: Over three months, indices showed a trend towards improvement. Results were statistically significant when stratified into groups who achieved cure and success. Moreover, there was a mean improvement in AHI: -12.7 ± 9.3, AI: -5.7 ± 8.2, HI: -6.3 ± 3.7, ODI: -11.2 ± 8.6 for responders with a success rate of 41%. Out of QOL surveys, ESS showed a decrease of -1.41 [-2.52, -0.3] (p = 0.017) when controlled for age and body mass index (BMI). Up to 68.8% of patients found that the device was useful in alleviating snore symptoms. Adherence rate was reported at 59%. CONCLUSION: Titratable PAT-MAD is an economical and effective option for a patient of Chinese descent. It has the potential to serve as a device for trial use and means of selection before proceeding with customized MADs. Further studies will be required to substantiate other factors which influence the recommendation of MADs for patients with this demographic.

Hyaluronic acid on the urokinase sustained release with a hydrogel system composed of poloxamer 407: HA/P407 hydrogel system for drug delivery.

Pleural empyema is an inflammatory condition characterized by accumulation of pus inside the pleural cavity, which is usually followed by bacterial pneumonia. During the disease process, the pro-inflammatory and pro-fibrotic cytokines in the purulent pleural effusion cause proliferation of fibroblasts and deposition of extracellular matrix, which lead to fibrin deposition and fibrothorax. Urokinase instillation therapy through a chest drainage tube is frequently used for fibrinolysis in patients with empyema. However, urokinase treatment requires multiple instillation (2-3 times per day, for 4-8 days) and easily flows out from the chest drainage tube due to its high water solubility. In this in vitro study, we developed a thermo-responsive hydrogel based on poloxamer 407 (P407) combined with hyaluronic acid (HA) for optimal loading and release of urokinase. Our results show that the addition of HA to poloxamer gels provides a significantly more compact microstructure, with smaller pore sizes (**p < 0.001). The differential scanning calorimetry (DSC) profile revealed no influence on the micellization intensity of poloxamer gel by HA. The 25% poloxamer-based gel was significantly superior to the 23% poloxamer-based gel, with slower gel erosion when comparing the 16th hour residual gel weight of both gels (*p < 0.05; **p < 0.001). The 25% poloxamer-HA gel also exhibited a superior urokinase release profile and longer release time. A Fourier-transform infrared spectroscopy (FT-IR) study of the P407/HA hydrogel showed no chemical interactions between P407 and HA in the hydrogel system. The thermoresponsive P407/HA hydrogel may have a promising potential in the loading and delivery of hydrophilic drugs. On top of that, in vitro toxicity test of this combination demonstrates a lower toxicity.

Synthesis and Application of a Novel Gene Delivery Vector for Non-Small-Cell Lung Cancer Therapy.

Human Wnt inhibitory factor-1 (hWIF-1), as an anti-oncogene, holds great promise for non-small-cell lung cancer (NSCLC) therapy. However, the clinical application of hWIF-1 in cancer therapy is limited by elimination and degradation of free hWIF-1 in vivo. Therefore, it is necessary to develop safe and effective gene delivery vectors for hWIF-1 delivery in vivo. In this paper, we synthesized a novel polyethylenimine (PEI) derivative PEI-SP5-2 (PES) based on branched PEI1800 and NSCLC-targeting peptide SP5-2 to deliver hWIF-1 for NSCLC therapy. PES had excellent gene delivery capacity, and the transfection efficiency reached 50.02% ± 4.75% in A549 cell lines when the weight ratio of PES/gene was 100. Besides, the PES/gene particles were monodispersed, and the hydrodynamic diameter and zeta potential were 47.55 nm and 24.9 mV, respectively. In addition, PES/hWIF-1 complexes could inhibit the tumor growth in vitro and in vivo when it was used for non-small-cell lung cancer therapy. We concluded that PES would be promising as a novel gene delivery vector, and PES/hWIF-1 complexes inhibited the tumor growth and showed potential for non-small-cell lung cancer therapy.

A fully degradable and photocrosslinked polysaccharide-polyphosphate hydrogel for tissue engineering.

Extracellular matrix degradability meditates cell behaviors and gains increasing importance in the development of implantation materials for tissue engineering. Here, we developed a fully biodegradable hydrogel combining the unique features of synthetic polyphosphate polymer and natural polysaccharide polymer. Polyphosphate copolymer poly(butynyl phospholane)-random-poly(ethylethylene phosphate) (PBYP-r-PEEP) bearing pendent alkynes was synthesized through a facile one-pot reaction. Subsequently, thiol-yne "click" reaction was employed to fabricate the fully degradable and photocrosslinked hydrogel by mixing PBYP-r-PEEP with thiolated biodegradable hyaluronic acid (HA-SH). The generated HA/PPE hydrogels show viscoelastic properties and enzymatic biodegradability, supporting the growth of human mesenchymal stem cells (hMSCs). HA/PPE hydrogel is permissive to the covalent conjugation of cell-adhesive peptide RGD, which can enhance the cell-cell interactions. This HA/PPE hydrogel system provides a fully biodegradable platform that can support hMSCs growth and facilitate the formation of cell clustering, expanding the range of fully degradable materials for tissue engineering and regenerative medicine.

Intratumoral Injection of Norcantharidin-Loaded Poly(D,L-lactide)-b-Poly(ethylene glycol)-b-Poly(D,L-lactide) Thermosensitive Hydrogel for the Treatment of Primary Hepatocellular Carcinoma.

In this study we employed self-designed PDLLA-PEG-PDLLA (PLEL) thermosensitive hydrogel to blend with norcantharidin (NCTD), a hydrophilic chemotherapeutic drug possessing curative effect on primary hepatocellular carcinoma (HCC) and adverse effects, then utilized the composite in HCC interstitial chemotherapy. PLEL copolymer was synthesized by ring-opening polymerization, NCTD-loaded PLEL hydrogel was prepared in a simple and reasonable way. The addition of NCTD had no significant effect on the temperature-dependent rheological properties of PLEL hydrogel. The pH values of NCTD-loaded gel solutions (13 wt%) and free NCTD solutions with three drug concentrations of 0.4 mg/mL, 0.8 mg/mL and 1.2 mg/mL under different storage conditions met the pH requirement of small-volume injection. There was no significant difference among the drug release behaviors of NCTD-loaded gels with drug concentrations of 0.4 mg/mL, 0.8 mg/mL and 1.2 mg/mL, they fitted first-order dynamics, exhibited significantly slower drug release than free drug solutions and the release was mainly based on drug diffusion. Drug-loaded gel solution (13 wt%) could evenly distribute throughout tumor tissue before converting into gel after being intratumorally injected and was able to significantly prolong retention time of the drug in tumor compared to free drug solution. The sustained-release performance of NCTD-loaded gel (13 wt%) was confirmed from the perspective of pharmacodynamics in vitro. The in vivo evaluation demonstrated that intratumoral injection of NCTD-loaded PLEL gel (13 wt%) was capable of improving curative effect of the drug and reducing its toxicity.