Decreased expression of ATP-binding cassette protein G1 promotes abnormal adipogenesis of condylar chondrocytes in temporomandibular joint osteoarthritis.

BACKGROUND: Abnormal lipid metabolism is involved in the development of osteoarthritis (OA). ATP-binding cassette protein G1 (ABCG1) is crucial in mediating the outflow of cholesterol, phosphatidylcholine and sphingomyelin and reducing intracellular lipid accumulation. OBJECTIVE: This study aimed to evaluate whether ABCG1 participates in the abnormal adipogenesis of chondrocytes in osteoarthritic cartilage of temporomandibular joint. METHODS: Eight-week-old female rats were subjected to unilateral anterior crossbite (UAC) to induce OA in the temporomandibular joint (TMJ). Histochemical staining, immunohistochemical (IHC) staining, and qRT-PCR were performed. Primary condylar chondrocytes of rats were transfected with ABCG1 shRNA or overexpression lentivirus and then stimulated with fluid flow shear stress (FFSS). Cells were collected for oil red O staining, immunofluorescence staining, and qRT-PCR analysis. RESULTS: Abnormal adipogenesis, characterized by increased expression of Adiponectin, CCAAT/enhancer-binding protein α (Cebpα), fatty acid binding protein 4 (Fabp4) and Perilipin1, was enhanced in the degenerative cartilage of TMJ OA in rats with UAC, accompanied by decreased expression of ABCG1. After FFSS stimulation, we observed lipid droplets in the cytoplasm of cultured cells with increased expression of Adiponectin, Cebpα, Fabp4 and Perilipin1 and decreased expression of ABCG1. Knockdown of Abcg1 induced abnormal adipogenesis and differentiation of condylar chondrocytes. Overexpression of ABCG1 alleviated the abnormal adipogenesis and differentiation of condylar chondrocytes induced by FFSS. CONCLUSIONS: Abnormal adipogenesis of chondrocytes and decreased ABCG1 expression were observed in degenerative cartilage of TMJ OA. ABCG1 overexpression effectively inhibits the adipogenesis of chondrocytes and thus alleviates TMJ condylar cartilage degeneration.

Syndecan-4 inhibition attenuates cartilage degeneration in temporomandibular joint osteoarthritis.

BACKGROUND: Syndecan 4 (SDC4), a type I transmembrane proteoglycan, serves as a critical link between chondrocytes and the extracellular matrix. OBJECTIVE: This study aimed to explore the role of SDC4 in cartilage degeneration of temporomandibular joint osteoathritis (TMJOA). METHODS: Condylar chondrocytes were stimulated with varying concentrations of recombinant rat interleukin-1ß (rrIL-1ß) and SDC4 small interfering RNA (si-SDC4). Anti-SDC4 ectodomain-specific antibodies or IgG were intra-articularly administrated in a TMJOA model rats. SDC4 conditional knockout (SDC4-cKO) and Sdc4flox/flox mice were induced TMJOA. Cartilage degeneration was assessed using haematoxylin & eosin (H&E) and safranin O (SO) staining. Protein levels of SDC4, matrix metalloproteinases (MMPs), a disintegrin and metalloproteinase with a thrombospondin motifs 5 (ADAMTS5), tumour necrosis factor α (TNFα), type II collagen (Col-II), aggrecan (ACAN), cleaved caspase 3 (CASP3), Ki67 and related pathways in condylar cartilage were evaluated by immunohistochemical (IHC) staining or western blot assays. RESULTS: SDC4 expression was evidently increased in MIA-model animals compared to control groups. rrIL-1ß stimulation increased the expression of SDC4, MMP3 and ADAMTS5 expression in chondrocytes, while decreasing the expression of Col-II. These effects were reversed by si-SDC4 in vitro. In vivo, SDC4 blockade reduced the death of chondrocytes and the loss of cartilage matrix, which was evidenced by increased expression of Col-II and ACAN, and a decrease in SDC4, MMP13 and cleaved-CASP3-positive cells. Furthermore, the protein levels of ACAN and Ki67 were elevated, and the ERK1/2 and P38 signalling pathways were activated following SDC4 inhibition. CONCLUSIONS: SDC4 inhibition significantly ameliorates condylar cartilage degeneration, which was mediated, at least partly, through P38 and ERK1/2 signalling. Inhibition of SDC4 may be of great value for the treatment of TMJOA.

Manipulation of Particle/Cell Based on Compressibility in a Divergent Microchannel by Surface Acoustic Wave.

The mechanical properties (compressibility or deformability) of cells are closely related to their death, migration, and differentiation. Accurate separation and manipulation of bioparticles based on these mechanical properties are still a challenging in the field of acoustofluidics. In this work, based on surface acoustic waves (SAW) and divergent microchannels, we developed a new method for separating and detecting particles or cells with different compressibility. The difference in acoustic radiation force (Fr) caused by compressibility are gradually amplified and accumulated by decreasing the flow velocity, and they are finally reflected in the particle migration distance. During the transverse migration process, the alternating dominance of the acoustic radiation force and the Stokes resistance force (Fs) drives the particles to create three typical migration patterns: intermittent migration, compound migration, and near-wall migration. In the present tilted SAW device, a 91% separation success rate of ∼10 µm polystyrene (PS) and polydimethylsiloxane (PDMS) particles can be achieved by optimizing the acoustic field input power and the fluid velocity. The application potential of the present divergent microchannel is validated by separating the myelogenous leukemia cell K562 and the natural killer cell NK92 that have similar densities and sizes (∼15 µm) but different compressibility. The results of this work are expected to provide valuable insights into the acoustofluidics separation and detection of the cells that are with different compressibility.

Soil pollution and the invasion of congener Sphagneticola in crop lands.

The input of agro-pollutants, such as microplastics and nanopesticides, on farmlands is widespread and may facilitate biological invasions in agroecosystems. Here, the effects of agro-pollutants that promote invasion of congener species is studied by examining the growth performance of native Sphagneticola calendulacea and its invasive congener, S. trilobata, when grown in a native only, invasive only and mixed community. Sphagneticola calendulacea naturally occurs in croplands in southern China, while S. trilobata was introduced to this region and has since naturalized, encroaching onto farmland. In our study, each plant community was subjected to the following treatments: control, microplastics only, nanopesticides only, and both microplastics and nanopesticides. The effects of the treatments on soils of each plant community were also examined. We found that aboveground, belowground, and photosynthetic traits of S. calendulacea were significantly inhibited by the combined microplastics and nanopesticides treatment in the native and mixed communities. The relative advantage index of S. trilobata was 69.90% and 74.73% higher under the microplastics only and nanopesticides only treatments respectively compared to S. calendulacea. Soil microbial biomass, enzyme activity, gas emission rates, and chemicals in each community were reduced when treated with both microplastics and nanopesticides. Yet, soil microbial biomass of carbon and nitrogen, CO2 emission rates and nitrous oxide rates were significantly higher (56.08%, 58.33%, 36.84% and 49.95% respectively) in the invasive species community than in the native species community under microplastics and nanopesticides. Our results suggest that the addition of agro-pollutants to soils favors the more resistant S. trilobata and suppresses the less tolerant S. calendulacea. Soil properties from the native species community are also more impacted by agro-pollutants than substrates supporting the invasive species. Future studies should explore the effects of agro-pollutants by comparing other invasive and native species and considering human activities, industry, and the soil environment.

Down-regulation of PvSAMS impairs S-adenosyl-L-methionine and lignin biosynthesis, and improves cell wall digestibility in switchgrass.

S-adenosyl- l-methionine (SAM) is the methyl donor involved in the biosynthesis of guaiacyl (G) and syringyl (S) lignins in vascular plants. SAM is synthesized from methionine through the catalysis of the enzyme S-adenosylmethionine synthase (SAMS). However, the detailed function of SAMS in lignin biosynthesis has not been widely investigated in plants, particularly in monocot species. In this study, we identified PvSAMS genes from switchgrass (Panicum virgatum L.), an important dual-purpose fodder and biofuel crop, and generated numerous transgenic switchgrass lines through PvSAMS RNA interference technology. Down-regulation of PvSAMS reduced the contents of SAM, G-lignins, and S-lignins in the transgenic switchgrass. The methionine and glucoside derivatives of caffeoyl alcohol were found to accumulate in the transgenic plants. Moreover, down-regulation of PvSAMS in switchgrass resulted in brownish stems associated with reduced lignin content and improved cell wall digestibility. Furthermore, transcriptomic analysis revealed that most sulfur deficiency-responsive genes were differentially expressed in the transgenic switchgrass, leading to a significant increase in total sulfur content; thus implying an important role of SAMS in the methionine cycle, lignin biosynthesis, and sulfur assimilation. Taken together, our results suggest that SAMS is a valuable target in lignin manipulation, and that manipulation of PvSAMS can simultaneously regulate the biosynthesis of SAM and methylated monolignols in switchgrass.

Genome-Wide Identification of Switchgrass Laccases Involved in Lignin Biosynthesis and Heavy-Metal Responses.

Plant laccase genes belong to a multigene family, play key roles in lignin polymerization, and participate in the resistance of plants to biotic and abiotic stresses. Switchgrass is an important resource for forage and bioenergy production, yet information about the switchgrass laccase gene family is scarce. Using bioinformatic approaches, a genome-wide analysis of the laccase multigene family in switchgrass was carried out in this study. In total, 49 laccase genes (PvLac1 to PvLac49) were identified; these can be divided into five subclades, and 20 of them were identified as targets of miR397. The tandem and segmental duplication of laccase genes on Chr05 and Chr08 contributed to the expansion of the laccase family. The laccase proteins shared conserved signature sequences but displayed relatively low sequence similarity, indicating the potential functional diversity of switchgrass laccases. Switchgrass laccases exhibited distinct tissue/organ expression patterns, revealing that some laccases might be involved in the lignification process during stem development. All five of the laccase isoforms selected from different subclades responded to heavy metal. The immediate response of lignin-related laccases, as well as the delayed response of low-abundance laccases, to heavy-metal treatment shed light on the multiple roles of laccase isoforms in response to heavy-metal stress.

Preparation of the lingual canal in mandibular first premolar with canal bifurcation.

The aim of this study was to establish an effective method of locating and negotiating the lingual canal in mandibular first premolars with two canals during root canal preparation. A total of 125 mandibular first premolars with radicular grooves were collected, and after micro-computed tomography scanning, 50 mandibular first premolars with a Vertucci V/III canal form were selected based on the inclusion criteria. Access cavities were prepared, and the lingual canals (LCs) were searched in four following steps: step 1 direct vision and a straight K-file; step 2 stereomicroscopy and a straight K-file; step 3 stereomicroscopy and a pre-curved K-file; and step 4 a long-neck bur. After localization, the LCs were instrumented. In most cases, access to the LC was achieved by step 2 (19/50, 38%) or step 3 (22/50, 44%). In three cases (6%), step 1 alone was enough to achieve access to the orifice, and in six cases (12%), access to the lingual canal was not achieved until step 4. Overall, 43 of the 50 mandibular first premolars (86%) were successfully instrumented, and the remaining seven failed. Two cases failed in the process of negotiating the canal to full length and five cases failed due to procedural errors (ledge formation, canal perforation, vertical fracture, or instrument separation). The LC in mandibular first premolars is a major endodontic challenge. A stereomicroscope and a pre-curved K file are suggested to be valuable tools for detecting and accessing the extra LC.

Distinct and Overlapping Functions of Miscanthus sinensis MYB Transcription Factors SCM1 and MYB103 in Lignin Biosynthesis.

Cell wall recalcitrance is a major constraint for the exploitation of lignocellulosic biomass as a renewable resource for energy and bio-based products. Transcriptional regulators of the lignin biosynthetic pathway represent promising targets for tailoring lignin content and composition in plant secondary cell walls. However, knowledge about the transcriptional regulation of lignin biosynthesis in lignocellulosic feedstocks, such as Miscanthus, is limited. In Miscanthus leaves, MsSCM1 and MsMYB103 are expressed at growth stages associated with lignification. The ectopic expression of MsSCM1 and MsMYB103 in N. benthamiana leaves was sufficient to trigger secondary cell wall deposition with distinct sugar and lignin compositions. Moreover, RNA-seq analysis revealed that the transcriptional responses to MsSCM1 and MsMYB103 overexpression showed an extensive overlap with the response to the NAC master transcription factor MsSND1, but were distinct from each other, underscoring the inherent complexity of secondary cell wall formation. Furthermore, conserved and previously described promoter elements as well as novel and specific motifs could be identified from the target genes of the three transcription factors. Together, MsSCM1 and MsMYB103 represent interesting targets for manipulations of lignin content and composition in Miscanthus towards a tailored biomass.

Preparation and Antibacterial Activity of Thermo-Responsive Nanohydrogels from Qiai Essential Oil and Pluronic F108.

Essential oils (EOs) have been used in cosmetics and food due to their antimicrobial and antiviral effects. However, the applications of EOs are compromised because of their poor aqueous solubility and high volatility. Qiai (Artemisia argyi Levl. et Van. var. argyi cv. Qiai) is a traditional Chinese herb and possesses strong antibacterial activity. Herein, we report an innovative formulation of EO as nanohydrogels, which were prepared through co-assembly of Qiai EO (QEO) and Pluronic F108 (PEG-b-PPG-b-PEG, or PF108) in aqueous solution. QEO was efficiently loaded in the PF108 micelles and formed nanohydrogels by heating the QEO/PF108 mixture solution to 37 °C, by the innate thermo-responsive property of PF108. The encapsulation efficiency and loading capacity of QEO reached 80.2% and 6.8%, respectively. QEO nanohydrogels were more stable than the free QEO with respect to volatilization. Sustained QEO release was achieved at body temperature using the QEO nanohydrogels, with the cumulative release rate reaching 95% in 35 h. In vitro antibacterial test indicated that the QEO nanohydrogels showed stronger antimicrobial activity against S. aureus and E. coli than the free QEO due to the enhanced stability and sustained-release characteristics. It has been attested that thermo-responsive QEO nanohydrogels have good potential as antibacterial cosmetics.

Directional axonal regrowth induced by an aligned fibrin nanofiber hydrogel contributes to improved motor function recovery in canine L2 spinal cord injury.

Spinal cord injuries (SCI) normally disrupt the long axonal tracts of the spinal cord and cause permanent neurological deficits, for which there is currently a lack of effective therapeutic methods. Biomaterial-based regenerative medicine is a pivotal strategy to induce axonal regeneration through delivery of biophysical and/or biochemical regulatory cues by biomaterials. We previously fabricated a hierarchically aligned fibrin hydrogel (AFG) that could promote neurogenic differentiation of stem cells in vitro and has been successfully applied for peripheral nerve and spinal cord regeneration in rats. In this study, AFG was used to repair a canine lumbar segment 2 hemisection spinal cord injury, and the consistency of histological, imageological and behavioral results was compared. AFG was used to construct an aligned fiber bridge that supported cell adhesion in vitro and rapidly facilitated tissue invasion along the long axis of fibers in vivo, Moreover, in vivo results demonstrated regrowth of axons in an oriented pattern connecting the rostral and caudal stumps. Consistent results were confirmed by diffusion tensor imaging, which allowed successful tracing of reconnected nerve fibers across the defect. As a result, directional axonal regrowth contributed to significantly improved recovery of motor functional behavior of SCI canines with AFG implantation. Our results suggest that AFG has great promise for rapidly directing axonal regrowth for nerve regeneration.

Flavanone-Based Fluorophores with Aggregation-Induced Emission Enhancement Characteristics for Mitochondria-Imaging and Zebrafish-Imaging.

Fluorophores with aggregation-induced emission enhancement (AIEE) characteristics applied in bioimaging have attracted more and more attention in recent years. In this work, a series of flavanone compounds with AIEE characteristics was developed and applied to fluorescence imaging of mitochondria and zebrafish. The compounds were readily prepared by the thermal dehydration of chalcone that was obtained by the reaction of o-hydroxyacetophenone and benzaldehyde. Two of these compounds showed significant AIEE characteristics by fluorescence performance experiments, including optical spectra, fluorescence spectra, fluorescence quantum yield (φF), fluorescence lifetime, and scanning electron microscopy (SEM). Compared with traditional organic fluorescent dyes, these compounds have high fluorescence emission and high fluorescence quantum yield in solid or aggregated state, which overcomes the shortcoming of aggregation-caused quenching (ACQ). More importantly, the two compounds exhibited low cytotoxicity and good cytocompatibility in A549 lung cells at the experimental concentration range and they specifically targeted mitochondria, which make it of great potential use in mitochondria labeling. In addition, they were embryonic membrane permeable and had different affinities for different tissues and organs of zebrafish, but mainly distributed in the digestive system, providing a basis for the application of such compounds in bioimaging. These AIEE compounds with superior properties could be of great potential use in mitochondria imaging and other in vivo studies.

The in vivo impact of MsLAC1, a Miscanthus laccase isoform, on lignification and lignin composition contrasts with its in vitro substrate preference.

BACKGROUND: Understanding lignin biosynthesis and composition is of central importance for sustainable bioenergy and biomaterials production. Species of the genus Miscanthus have emerged as promising bioenergy crop due to their rapid growth and modest nutrient requirements. However, lignin polymerization in Miscanthus is poorly understood. It was previously shown that plant laccases are phenol oxidases that have multiple functions in plant, one of which is the polymerization of monolignols. Herein, we link a newly discovered Miscanthus laccase, MsLAC1, to cell wall lignification. Characterization of recombinant MsLAC1 and Arabidopsis transgenic plants expressing MsLAC1 were carried out to understand the function of MsLAC1 both in vitro and in vivo. RESULTS: Using a comprehensive suite of molecular, biochemical and histochemical analyses, we show that MsLAC1 localizes to cell walls and identify Miscanthus transcription factors capable of regulating MsLAC1 expression. In addition, MsLAC1 complements the Arabidopsis lac4-2 lac17 mutant and recombinant MsLAC1 is able to oxidize monolignol in vitro. Transgenic Arabidopsis plants over-expressing MsLAC1 show higher G-lignin content, although recombinant MsLAC1 seemed to prefer sinapyl alcohol as substrate. CONCLUSIONS: In summary, our results suggest that MsLAC1 is regulated by secondary cell wall MYB transcription factors and is involved in lignification of xylem fibers. This report identifies MsLAC1 as a promising breeding target in Miscanthus for biofuel and biomaterial applications.

Environmental occurrences, fate, and impacts of microplastics.

Microplastics (MPs) are small plastic pieces with size less than 5 mm that have entered and polluted the environment. While many investigations including several critical reviews on MPs in the environment have been conducted, most of them are focused on their occurrences in marine environment. Current understanding on the occurrences, behaviors, and impacts of MPs in the terrestrial environment is far from complete. A systematic review of the literature was thus conducted to promote the research on MPs in the environment. This work is designed to provide a comprehensive overview that summarizes current knowledge and research findings on environmental occurrences, fate and transport, and impacts of MPs. In addition to discussing the occurrences, characteristics, and sources of MPs in the ocean, freshwater, sediments, soils, and atmosphere, the review also summarizes both the experimental and modeling data of the environmental fate and transport of MPs. Research findings on the toxic effects, bioaccumulation, and bioavailability of MPs in the environment are also covered in this critical review. Future perspectives are discussed as well.

Biodegradable amphiphilic block-graft copolymers based on methoxy poly(ethylene glycol)-b-(polycarbonates-g-polycarbonates) for controlled release of doxorubicin.

In this paper, novel biodegradable amphiphilic block-graft copolymers based on methoxy poly(ethylene glycol)-b-(polycarbonates-g-polycarbonates) (mPEG-b-(PATMC-g-PATMC)) were synthesized successfully for controlled release of doxorubicin (DOX). Backbone block copolymer, methoxy poly(ethylene glycol)-b-poly(5-allyloxy-1,3-dioxan-2-one) (mPEG-b-PATMC) was synthesized in bulk catalyzed by immobilized porcine pancreas lipase (IPPL). Then, mPEG-b-PATMC-O, the allyl epoxidation product of mPEG-b-PATMC, was further grafted by PATMC itself also using IPPL as the catalyst. The copolymers were characterized by (1)N HMR and gel permeation chromatography results showed narrow molecular weight distributions. Stable micelle solutions could be prepared by dialysis method, while a monomodal and narrow size distribution could be obtained. Transmission electron microscopy (TEM) observation showed the micelles dispersed in spherical shape with nano-size before and after DOX loading. Compared with the block copolymers, the grafted structure could enhance the interaction of polymer chains with drug molecules and improve the drug-loading capacity and entrapment efficiency. Furthermore, the amphiphilic block-graft copolymers mPEG-b-(PATMC-g-PATMC) had low cytotoxicity and more sustained drug release behavior.

Carboxymethyl cellulose stabilization induced changes in particle characteristics and dechlorination efficiency of sulfidated nanoscale zero-valent iron.

Polymer stabilization, exemplified by carboxymethyl cellulose (CMC), has demonstrated effectiveness in enhancing the transport of nanoscale zero-valent iron (nZVI). And, sulfidation is recognized for enhancing the reactivity and selectivity of nZVI in dechlorination processes. The influence of polymer stabilization on sulfidated nZVI (S-nZVI) with various sulfur precursors remains unclear. In this study, CMC-stabilized S-nZVI (CMC-S-nZVI) was synthesized using three distinct sulfur precursors (S2-, S2O42-, and S2O32-) through one-step approach. The antioxidant properties of CMC significantly elevated the concentration of reduced sulfur species (S2-) on CMC-S-nZVIs, marking a 3.1-7.0-fold increase compared to S-nZVIs. The rate of trichloroethylene degradation (km) by CMC-S-nZVIs was observed to be 2.2-9.0 times higher than that achieved by their non-stabilized counterparts. Among the three CMC-S-nZVIs, CMC-S-nZVINa2S exhibited the highest km. Interesting, while the electron efficiency of CMC-S-nZVIs surged by 7.9-12 times relative to nZVI, it experienced a reduction of 7.0-34% when compared with S-nZVIs. This phenomenon is attributed to the increased hydrophilicity of S-nZVI particles due to CMC stabilization, which inadvertently promotes the hydrogen evolution reaction (HER). In conclusion, the findings of this study underscores the impact of CMC stabilization on the properties and dechlorination performance of S-nZVI sulfidated using different sulfur precursors, offering guidance for engineering CMC-S-nZVIs with desirable properties for contaminated groundwater remediation.

Mesoscopic Model for Reversible Adsorption Stage of Albumin and Fibrinogen on TiO2 Surface.

The competitive behavior of proteins in the reversible adsorption stage plays a crucial role in determining the composition of the protein layer and the subsequent biological responses to the biomaterial. However, such competitive adsorption is a mesoscopic process at physiological protein concentration, and neither a macroscopic experiment nor microscopic MD (molecular dynamics) simulation is suitable to clarify it. Here, we proposed a mesoscopic DPD (dissipative particle dynamics) model to illustrate the competitive process of albumin and fibrinogen on TiO2 surface with its parameters deduced from our previous MD simulation, and proved the model well retained the diffusion and adsorption properties of proteins in the competitive adsorption on the plane surface. We then applied the model to the competitive adsorption on the surfaces with different nanostructures and observed that when the nanostructure size is much larger than that of protein, the increase in surface area is the main influencing factor; when the nanostructure size is close to that of protein, the coordination between the nanostructure and the size and shape of protein significantly affects the competitive adsorption process. The model has revealed many mechanical phenomena observed in previous experimental studies and has the potential to contribute to the development of high-performance biomaterials.

Microplastics and cadmium affect invasion success by altering complementarity and selection effects in native community.

The diversity-invasibility hypothesis predicts that native plant communities with high biodiversity should be more resistant to invasion than low biodiversity communities. However, observational studies have found that there is often a positive relationship between native community diversity and invasibility. Pollutants were not tested for their potential to cause this positive relationship. Here, we established native communities with three levels of diversity (1, 2 and 4 species) and introduced an invasive plant [Symphyotrichum subulatum (Michx.) G. L. Nesom] to test the effects of different pollutant treatments (i.e., unpolluted control, microplastics (MPs) alone, cadmium (Cd) alone, and their combination) on the relationship between native community diversity and community invasibility. Our results indicate that different MPs and Cd treatments altered the invasibility of native communities, but this effect may depend on the type of pollutant. MPs single treatment reduced invasion success, and the degree of reduction increased with increasing native community diversity (Diversity 2: - 14.1 %; Diversity 4: - 63.1 %). Cd single treatment increased the aboveground biomass of invasive plants (+ 40.2 %) and invasion success. The presence of MPs inhibited the contribution of Cd to invasion success. Furthermore, we found that the complementarity and selection effects of the native community were negatively correlated with invasion success, and their relative contributions to invasion success also depended on the pollutant type. We found new evidence of how pollutants affect the relationship between native community diversity and habitat invasibility, which provides new perspectives for understanding and managing biological invasions in the context of environmental pollution. This may contribute to promoting the conservation of biodiversity, especially in ecologically sensitive and polluted areas.

Enzymatic synthesis of poly(ε-caprolactone) in monocationic and dicationic ionic liquids.

Enzymatic polymerization can offer metal-free routes to polymer materials that could be used in biomedical applications. To take advantage of the unique properties of ionic liquids (ILs) for enzyme stability, monocationic ionic liquid (MIL) and dicationic ionic liquid (DIL) were used to promote the ring-opening polymerization of ε-caprolactone (ε-CL) using Candida antarctica lipase B as catalyst. Considering the molecular weight (M n ) and reaction yield of the resulting polymer (PCL), high density and viscosity of ILs would be good, especially in the case of DIL. With the same total alkyl chain length, the density and viscosity of [C4(C6Im)2][PF6]2 were higher than that of [C12MIm][PF6]. Using a lipase/CL/ILs ratio of 1:20:20 (by wt) for 48 h at 90 °C, the highest M n and reaction yield of PCL were 26,200 g/mol and 62 % with [C4(C6Im)2][PF6]2, while the M n and reaction yield of PCL obtained in [C12MIm][PF6] were 11,700 g/mol and 37 %.

Synthesis of poly(ε-caprolactone) by an immobilized lipase coated with ionic liquids in a solvent-free condition.

Polycaprolactone (PCL) was synthesized by ring-opening polymerization of ε-caprolactone through two different enzymatic processes. The lipase from Candida antarctica B, immobilized on macroporous acrylic acid beads, was employed either untreated or coated with small amounts of ionic liquids (ILs). Monocationic ionic liquids, [C(n)MIm][NTf2] (n = 2, 6, 12), as well as a dicationic ionic liquid, ([C4(C6Im)2][NTf2]2), were used to coat the immobilized lipase and also as the reaction medium. In both methods, the polarity, anion of the ILs concentration and viscosity strongly influenced the reaction. Coating the immobilized enzyme with ILs improved catalytic activity and less ILs was required to produce PCL with a higher molecular weight and reaction yield. At 60 °C and ILs/Novozyme-435 coating ratio of 3:1 (w/w) for 48 h, the highest M(w) and reaction yield of PCL were 35,600 g/mol and 62% in the case of [C12MIm][NTf2], while the M(w) and reaction yield of PCL was 20,300 g/mol and 54 % with [C12MIm][NTf2] and catalyzed by untreated lipase.

Amphipathic tail-anchoring peptide and Bcl-2 homology domain-3 (BH3) peptides from Bcl-2 family proteins induce apoptosis through different mechanisms.

Bcl-2 homology domain-3 (BH3) peptides are potent cancer therapeutic reagents that target regulators of apoptotic cell death in cancer cells. However, their cytotoxic effects are affected by different expression levels of Bcl-2 family proteins. We recently found that the amphipathic tail-anchoring peptide (ATAP) from Bfl-1, a bifunctional Bcl-2 family member, produced strong pro-apoptotic activity by permeabilizing the mitochondrial outer membrane. Here, we test whether the activity of ATAP requires other cellular factors and whether ATAP has an advantage over the BH3 peptides in targeting cancer cells. Confocal microscopic imaging illustrates specific targeting of ATAP to mitochondria, whereas BH3 peptides show diffuse patterns of cytosolic distribution. Although the pro-apoptotic activities of BH3 peptides are largely inhibited by either overexpression of anti-apoptotic Bcl-2 or Bcl-xL or nullification of pro-apoptotic Bax and Bak in cells, the pro-apoptotic function of ATAP is not affected by these cellular factors. Reconstitution of synthetic ATAP into liposomal membranes results in release of fluorescent molecules of the size of cytochrome c from the liposomes, suggesting that the membrane permeabilizing activity of ATAP does not require additional protein factors. Because ATAP can target to the mitochondrial membrane and its pro-apoptotic activity does not depend on the content of Bcl-2 family proteins, it represents a promising candidate for anti-cancer drugs that can potentially overcome the intrinsic apoptosis-resistant nature of cancer cells.