Metallopolymer Particle Engineering via Etching of Boronate Polymers toward High-Performance Overall Water Splitting Catalysts.

Metallopolymers combine the property features of both metallic compounds and organic polymers, representing a typical direction for the design of high-performance hybrid materials. Here, a highly adaptive etching method to create pores and cavities in the metallopolymer particles is established. Starting from boronate polymer (BP) and inorganic@BP core-shell particles, porous, hollow, and yolk-shell metallopolymer particles can be fabricated, respectively. By taking advantage of the easy control over composition and pore/cavity structure, these metallopolymer particles provide a universal platform for the fabrication of nitrogen, boron co-doped carbon nanocomposites loaded with metals (M-NBCs). The as-prepared M-NBCs exhibit remarkable catalytic activities toward oxygen evolution reaction and hydrogen evolution reaction. An alkaline overall water splitting cell assembled by using M-NBCs as the anode and cathode can be driven by a single AAA battery. The proposed strategy for the construction of metallopolymer composites may enlighten for the design of complex hybrid nanomaterials.

The relationship between FOSB and SOCS3 gene polymorphisms and the susceptibility to periodontitis and osteopenia in the Chinese population.

The aim is to analyze the relationship and significance of the FOS, FOSB, Suppressors of cytokine signaling (SOCS), and hypoxia-inducible factor 1 (HIF1) gene loci and their polymorphisms with periodontitis and osteopenia in the Chinese population. In this case-control study, data on questionnaires, periodontal examination, bone mineral density, and FOS, FOSB, SOCS3, and HIF1 gene loci and their polymorphisms were obtained from 474 participants. The data were analyzed using the analysis of variance, Kruskal-Wallis test, χ2 test, and logistic regression. The incidence of osteopenia was significantly increased in patients with periodontitis compared to controls (58.6 vs. 34.4%, P < 0.001). Accordingly, the risk was increased 2.21-fold compared with controls (95% CI 2.09-4.95). Osteopenia patients had a significantly higher risk of periodontitis than patients with normal bone density (OR = 3.22, 95% CI 2.09-4.94). There were significant positive associations between FOSB and SOCS3 polymorphisms and periodontitis and osteopenia susceptibility. Individuals carrying the G/G genotype of the FOSB gene rs708905 locus had an increased risk of periodontitis (OR = 5.06, 95% CI 2.36-10.86) and osteopenia (OR = 3.26, 95% CI 1.34-7.96). Compared with the C/C genotype, the A/A genotype of the FOSB rs8105114 locus was associated with a significantly higher risk of periodontitis (OR = 2.14, 95% CI 1.02-4.53) and osteopenia (OR = 2.85, 95% CI 1.12-7.22). Compared with the A/A genotype, the risk of periodontitis in the G/G genotype of the SOCS3 rs7207782 locus was increased 3.10-fold (P < 0.001), and the risk of osteopenia was increased 2.01-fold (P = 0.023). There was a bidirectional relationship between periodontitis and osteopenia. The rs708905 G/G and rs8105114 A/A genotypes of FOSB and the rs7207782 G/G genotype of SOCS3 were risk factors for both periodontitis and osteopenia in the Chinese population, which could increase knowledge about disease­specific and cross­disease genetic pattern.

Conservative orthodontic and multidisciplinary approaches for patients with cleidocranial dysplasia in late adolescence or young adulthood.

This case series describes conservative orthodontic and multidisciplinary approaches for treating two patients diagnosed with cleidocranial dysplasia in late adolescence and young adulthood. Most of the impacted permanent teeth erupted spontaneously within 3 to 4 years after surgical extraction of the deciduous and supernumerary teeth. The remaining unerupted permanent teeth were facilitated with traction or extracted followed by implantation or restoration. Repositioning of the maxilla and mandible via orthognathic surgery was also applied to correct skeletal and occlusal discrepancies and lead to satisfying results.

Neurotrophin-3 gene-modified Schwann cells promote TrkC gene-modified mesenchymal stem cells to differentiate into neuron-like cells in poly(lactic-acid-co-glycolic acid) multiple-channel conduit.

Rapid progress in the field of nerve tissue engineering has opened up the way for new therapeutic strategies for spinal cord injury (SCI). Bone marrow-derived mesenchymal stem cells (MSCs) could be differentiated into neural lineages, which can be used as a potential cell source for nerve repair. Schwann cells (SCs) have been reported to support structural and functional recovery of SCI. In this study, we co-cultured neurotrophin-3 (NT-3) gene-modified SCs and NT-3 receptor tyrosine protein kinase C (TrkC) gene-modified MSCs in a three-dimensional porous poly(lactic-acid-co-glycolic acid) (PLGA) conduit with multiple channels in vitro for 14 days. Our results showed that more than 50% of the grafted MSCs were MAP2- and ß-III-tubulin-positive cells, and the MSCs expressed a high level of ß-III-tubulin detected by Western blotting, indicating a high rate of neuronal differentiation. Furthermore, immunostaining of PSD95 revealed the formation of a synapse-like structure, which was confirmed under electron microscopy. In conclusion, co-culture of NT-3 gene-modified SCs and TrkC gene-modified MSCs in the PLGA multiple-channeled conduit can promote MSCs' differentiation into neuron-like cells with synaptogenesis potential. Our study provides a biological basis for future application of this artificial MSCs/SCs/PLGA complex in the SCI treatment.

Preparation and antitumor activity of triphenylphosphine-based mitochondrial targeting polylactic acid nanoparticles loaded with 7-hydroxyl coumarin.

Due to the low bioavailability and severe toxic side effects caused by the lack of selectivity of traditional chemotherapy drugs, the targeted delivery of chemotherapy drugs has become the key to tumor treatment. The activity and transmembrane potential of mitochondria in cancer cells were significantly higher than that of normal cells, making them a potential target for chemotherapeutic drug delivery. In this study, triphenylphosphine (TPP) based mitochondria targeting polylactic acid (PLLA) nanoparticles (TPP-PLLA NPs) were synthesized to improve the delivery efficiency of anticancer drugs. The carrier material was characterized by 1H NMR and FT-IR and 7-hydroxyl coumarin (7-HC) was successfully loaded into TPP-PLLA to form 7-HC/TPP-PLLA NPs. Further studies showed that TPP-PLLA NPs were primarily accumulated in the mitochondrial and 7-HC/TPP-PLLA NPs had higher antitumor activity. Taken together, our results indicated that TPP-PLLA NPs could be a promising mitochondria-targeted drug delivery system for cancer therapy.

Selective Photocatalytic Transformation of Lignin to Aromatic Chemicals by Crystalline Carbon Nitride in Water-Acetonitrile Solutions.

The photocatalytic conversion of lignin to aromatic compounds in aqueous solutions is a promising approach. We herein report a crystalline carbon nitride prepared by high-temperature thermal polymerization and alkali-metal molten salt treatment, which was then applied in the selective conversion of lignin to aromatic compounds. The results showed that the tri-s-tri-C3N4 presented a relatively high activity and selectivity for the conversion of lignin in aqueous solutions. In a 95% water-acetonitrile solution, it achieved a relatively high conversation rate of lignin, reaching 62.00%, and the selectivity of the C-C bond cleavage was high, at 86.8%. The characterization results obtained by TEM, UV-vis/DRS, PL, and transient photocurrent response showed that the ultra-high activity of tri-s-tri-C3N4 was mainly due to the improvements in crystallinity and light absorption. Mechanism studies showed that the dispersion of the catalyst and the combination of lignin and catalyst in aqueous solvents with different acetonitrile ratios were the main factors affecting lignin conversion. As the water content in the solutions increased, the primary active sites were converted from h+ to ·O2-. This study revealed the interactions between lignin, photocatalysts, and reaction solutions, providing a theoretical basis for the photocatalytic conversion of lignin in aqueous solutions.

[Relationship between oral Candida albicans and flora in children with severe early childhood caries].

PURPOSE: To investigate the relationship between oral Candida albicans and flora in children with severe infant caries. METHODS: Forty-two children with severe infant caries (experimental group) and 40 caries-free children (control group) treated in Peking University Shenzhen Hospital from March 2018 to June 2019 were enrolled. The samples of saliva and plaque were collected and cultured. According to the culture results, the experimental group was further divided into two subgroups: Candida albicans positive group and Candida albicans negative group. The samples were sequenced by high-throughput sequencing technology, then the diversity and abundance of bacteria were analyzed. The data were processed by SPSS 23.0 software package. RESULTS: The positive rates of Candida albicans in saliva and plaque were significantly higher in the experimental group than in the control group(P<0.05). The abundance of Leptotrichia and Cardiobacterium in the saliva of children with positive Candida albicans in the experimental group was significantly higher than that of children with negative Candida albicans(P<0.05). The abundance of Prevotella in plaque of children with positive Candida albicans in the experimental group was significantly higher than that of children with negative Candida albicans and control group(P<0.05). The abundance of Leptotrichia in saliva of children with positive Candida albicans in the experimental group was significantly higher than that of children with negative Candida albicans (P<0.05), while the abundances of Capnocytophaga, Cardiobacterium hominis, and Capnocytophaga granulose were significantly lower than those of children with negative Candida albicans(P<0.05). The abundance of Streptococcus mutans, Lactobacillus gasseri, and Lactobacillus vaginalis in the plaque of positive Candida albicans in the experimental group were significantly higher than those of children with negative Candida albicans(P<0.05), while the abundance of Lactobacillus plantarum was significantly lower than that of children with negative Candida albicans (P<0.05). CONCLUSIONS: Candida albicans in children with severe infant caries children is closely correlated with the abundance of Leptotrichia, Capnocytophaga, Cardiobacterium hominis, Capnocytophaga granulosa, Streptococcus mutans and Lactobacillus, which may play a synergistic or antagonistic role.

Effect of the Degree of Acetylation of Chitin Nonwoven Fabrics for Promoting Wound Healing.

Chitin and chitosan have been extensively used as wound dressings because of their special functions to promote wound healing. However, there was little focus on the effects of the degree of acetylation (DA) on wound healing. In this work, the regenerated chitin nonwoven fabrics with DA values of 90, 71, 60, and 42% were prepared, and the morphology and physical performances of the fabrics were characterized. Moreover, the effects of DA of the chitin nonwoven fabrics on wound recovery were studied with a full-thickness skin defect model in rats. In vitro experiments indicated that the chitin nonwoven fabrics exhibited good biocompatibility and blood compatibility and a low blood-clotting index (BCI). In vivo experiments revealed that the chitin nonwoven fabrics could accelerate wound healing more effectively than gauze by promoting re-epithelialization and collagen deposition as well as by stimulating neovascularization. The results of the wound healing process showed that DA of the chitin nonwoven fabrics had a profound effect on promoting wound healing. Notably, the regenerated chitin nonwoven fabrics with 71% DA significantly improved the wound healing compared to the commercial wound dressing Algoplaque film. Therefore, the regenerated chitin nonwoven fabrics are promising candidates for wound healing.

Construction of novel amphiphilic chitosan-polylactide graft copolymer nanodroplets for contrast enhanced ultrasound tumor imaging.

In this experiment, a new amphiphilic chitosan-poly(lactide) graft copolymer was synthesized and characterized by IR, 1H-NMR, XRD, TGA. The obtained chitosan-poly (lactide) graft copolymer was used as the matrix material to prepare nanodroplets (NDs) encapsulating with liquid PFP by double-emulsion and solvent evaporation method. The resulting NDs were characterized by photon correlation spectroscopy and transmission electron microscopy (TEM). The biocompatibility was explored by cytotoxicity assay, cell migration assay and blood biochemistry analysis. The experiments of ultrasonic imaging in vitro and in vivo were carried out with a B-mode clinical ultrasound imaging system. The results of FI-IR and 1H-NMR confirmed the successful grafting reaction of polylactic acid(PLLA) to chitosan with a graft rate of 365%. The average size of the NDs was 101.1 ± 2.7 nm, with the polydispersity index (PDI) of 0.127 ± 0.020, and the zeta potential was -31.8 ± 1.5 mV. From the TEM results, NDs were highly dispersed and had a spherical shape with a distinct capsule structure. The NDs exhibited good stability during storage at 4°C. The NDs solution with different concentrations did not affect cell growth and showed good biocompatibility in cytotoxicity, cell migration and blood biochemistry studies. Under the irradiation of ultrasonic waves, the NDs formed an ultrasonic high signal, which could significantly enhance the ultrasound imaging of tumor tissue in vivo. Taken together, the NDs hold great potential for ultrasound imaging as a nanosized contrast agent.

[Measurements of mechanical properties and morphology of root canal in maxillary primary anterior teeth].

Objective This study aimed to measure the taper and diameter of root canal, as well as the elastic modulus and hardness in the root dentin of maxillary primary anterior teeth. Methods Patients under general anesthesia who needed root canal therapy in the maxillary primary anterior teeth were selected. Silicone impression material was used to take impressions. The impressions were scanned, and the taper and diameter of root canal were measured. Maxillary primary anterior teeth were collected in vitro. The elastic modulus and hardness of root dentin was tested. Results A total of 74 silicone impressions were obtained. The mean tapers of primary incisor teeth, primary lateral incisor teeth, and primary canine teeth were 0.106, 0.185, and 0.098, respectively. The mean diameters of the root canal 5 mm below the cementum-enamel junction (CEJ) were 1.267, 0.860, and 1.429 mm, respectively. The elastic modulus and hardness of root dentin were measured in 10 primary anterior teeth in vitro. The range of elastic modulus was 19.919-25.017 GPa. The range of hardness was 0.867-1.082 GPa. Conclusion The root canal post used in primary anterior teeth can be produced by the following data: taper of primary incisor teeth and primary canine teeth, 0.1; diameters of their tips, 1.2 mm and 1.4 mm, respectively; taper of primary lateral incisor teeth, 0.2; diameter of their tips, 0.8 mm; range of elastic modulus, 20-25 GPa; and range of hardness, 0.87-1.08 GPa.

Poly(ε-caprolactone) modification via surface initiated atom transfer radical polymerization with bio-inspired phosphorylcholine.

Bio-inspired phosphorylcholine modification on material surface has shown great promise in constructing biocompatible materials. In this study, poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) was grown on poly(ε-caprolactone) (PCL) surface in order to suppress protein adsorption and cells adhesion and to improve blood compatibility. The initiator for surface initiated atom transfer radical polymerization (SI-ATRP) was covalently tethered on PCL surface and then PMPC brushes with diverse graft amounts were grafted to PCL film. X-ray photoelectron spectroscopy (XPS) and water contact angle measurement were used to characterize the modified sheets. The PMPC-grafted PCL sheets showed lower protein adsorption, maintained secondary structure of detached protein, and suppressed adhesion and pseudopodium formation of the platelets, along with keeping longer activated partial thromboplastin time (APTT) in comparison with PCL membranes. At the same time, PMPC-grafted PCL sheets suppressed the LO2 cells adhesion. These results showed that phosphorylcholine SI-ATRP modification on PCL surface may provide PCL more biocompatible in biomaterial applications.

[Investigation of related risk factors of temporomandibular disorders in 109 patients].

PURPOSE: To investigate the related risk factors of temporomandibular disorders(TMD), and to provide evidences for clinical prevention. METHODS: One hundred and nine TMD patients were included in the study as case group, while 109 people with no TMJ symptoms and signs were selected randomly as control group. All subjects fulfilled questionaires. Logistics regression analysis was used to analyze the data with SPSS 22.0 software package. RESULTS: Females patients were more common than males, with 20~29 age group accounting for 44%. The proportions of patients with habits of bruxism or clenching, unilateral mastication and maxillofacial injure history were significantly greater than those of control group (P<0.05). The proportions of patients with life stress and habits of stay-up late, chewing hard food and orthodontic treatment history showed no significant difference compared with the control group (P>0.05). CONCLUSIONS: TMD has a higher prevalence in female than in male, with a peak incidence in 20-29 age group. Habits of bruxism or clenching, unilateral mastication and maxillofacial injury history may be risk factors of TMD, while life stress, habits of stay-up late, chewing hard food and orthodontic treatments show no significant correlation with TMD.

[Management of oral diseases during pregnancy].

Management of oral diseases during pregnancy prefers to be a comprehensive oral health care strategy throughout pre-pregnant, pregnant and prenatal stages. It provides guidance not only to promote the overall health in pregnant women, but also concern fetus development and children's oral health. Pregnancy is a time of particular vulnerability in terms of oral health due to complex physical and physiological changes. Physicians and dentists are responsible for providing professional medical care and treatment following clinical guidelines especially for pregnancy. It is also an opportune time in pregnancy to educate women about oral health care and preventing oral problems in young children. This article reviews the commonly occurring oral problems and their pathogenesis during pregnancy, dental procedures that can be carried out by physicians and preventive strategies that could be helpful in promoting oral health in both pregnant women and young children.

[Effects of mineral trioxide aggregate on the proliferation and differentiation of human pulp cells from primary and permanent teeth].

OBJECTIVE: This study aims to investigate the effects of mineral trioxide aggregate (MTA) and calcium hydroxide on proliferation and differentiation of human pulp cells from primary and permanent teeth. METHODS: Cell proliferation was detected by methyl thiazolyl tetrazolium (MTT) assay. The mRNA expression levels of dentinogenesis-related factors, including alkaline phosphatase (ALP) and dentin sialophosphoprotein (DSPP), and odontoclastogenesis-related factors, such as osteo- protegerin (OPG) and receptor activator of NF-κB ligand (RANKL), were determined by real time polymerase chain reac- tion (PCR). RESULTS: Primary and permanent pulp cells treated with calcium hydroxide exhibited significantly lower proli- feration rates than the control cells (P<0.01). By contrast, the MTA-treated group showed significantly higher proliferation rates than the control group (P<0.01). Real time PCR results showed that calcium hydroxide-treated primary pulp cells exhi- bited significantly decreased ALP, DSPP, and OPG expression compared with the control group (P<0.01). Conversely, the MTA-treated group displayed significantly increased ALP, DSPP, and OPG expression (P<0.01). Calcium hydroxide-treated primary pulp cells also exhibited significantly upregulated RANKL expression (P < 0.01); by contrast, MTA-treated cells did not show any change in RANKL expression (P>0.05). Likewise, MTA-treated permanent pulp cells showed significantly upregulated ALP and DSPP expression (P < 0.01). However, the calcium hydroxide-treated group remained almost the same as the control group (P > 0.05). Neither MTA nor calcium hydroxide affected OPG and RANKL expression in per- manent pulp cells (P > 0.05). CONCLUSION: MTA is more suitable as a pulp-capping agent, particularly in primary teeth, than calcium hydroxide.

Synthesis of amphiphilic copolymers containing zwitterionic sulfobetaine as pH and redox responsive drug carriers.

Amphiphilic poly(ɛ-caprolactone)-SS-poly(N,N-diethylaminoethyl methacrylate)-r-poly(N-(3-sulfopropyl)-N-methacrylate-N,N-diethylammonium-betaine) (PCL-SS-PDEASB) was designed and synthesized successfully. pH and redox dually responsive micelles were prepared based on the obtained copolymers, with zwitterionic sulfobetaines as hydrophilic shell, DEA as pH sensitive content and disulfide as redox responsive linkage. The micelle diameters were all less than 200 nm and the micelle diameter distributions were narrow. These micelles could be triggered by pH and redox condition. The drug release from the drug-loaded micelles displayed fastest under simultaneously acidic and reductive conditions. Results of in vitro cell toxicity evaluation showed that introduction of sulfobetaines could greatly decrease the toxicity of poly(ɛ-caprolactone)-SS-poly(N,N-diethylaminoethyl methacrylate) (PCL-SS-PDEA) micelles. DOX-loaded PCL-SS-PDEASB micelles showed higher efficiency to kill HeLa cells than DOX-loaded PCL-PDEASB micelles. Half inhibitory concentration (IC50) of DOX-loaded PCL-SS-PDEASB micelles decreased with the content of sulfobetaines increasing and was even closer to that of DOX·HCl. Thus, the pH and redox dually responsive biodegradable micelles generated by PCL-SS-PDEASB may be potential smart drug carriers for tumor targeted delivery.

Polyacrylic acid@zeolitic imidazolate framework-8 nanoparticles with ultrahigh drug loading capability for pH-sensitive drug release.

The polyacrylic acid@zeolitic imidazolate framework-8 (PAA@ZIF-8) nanoparticles (NPs) were first fabricated using a facile and simple route. It is worthwhile noting that the as-fabricated PAA@ZIF-8 NPs possessed ultrahigh doxorubicin (DOX) loading capability (1.9 g DOX g(-1) NPs), which were employed as pH-dependent drug delivery vehicles.

Stable aerobic granules in continuous-flow bioreactor with self-forming dynamic membrane.

A novel continuous-flow bioreactor with aerobic granular sludge and self-forming dynamic membrane (CGSFDMBR) was developed for efficient wastewater treatment. Under continuous-flow operation, aerobic granular sludge was successfully cultivated and characterized with small particle size of about 0.1-1.0mm, low settling velocity of about 15-25 m/h, loose structure and high water content of about 96-98%. To maintain the stability of aerobic granular sludge, strategies based on the differences of settling velocity and particle-size between granular and flocculent sludge were implemented. Moreover, in CGSFDMBR, membrane fouling was greatly relieved. Dynamic membrane was just cleaned once in more than 45 days' operation. CGSFDMBR presented good performance in treating septic tank wastewater, obtaining average COD, NH(4)(+)-N, TN and TP removal rates of 83.3%, 73.3%, 67.3% and 60%, respectively, which was more efficient than conventional bioreactors since that carbon, nitrogen and phosphorus were simultaneously removed in a single aerobic reactor.

Transplantation of artificial neural construct partly improved spinal tissue repair and functional recovery in rats with spinal cord transection.

Delivery of cellular and/or trophic factors to the site of injury may promote neural repair or axonal regeneration and return of function after spinal cord injury. Engineered scaffolds provide a platform to deliver therapeutic cells and neurotrophic molecules. To explore therapeutic potential of engineered neural tissue, we generated an artificial neural construct in vitro, and transplanted this construct into a completely transected spinal cord of adult rats. Two months later, behavioral analysis showed that the locomotion recovery was significantly improved compared with control animals. Immunoreactivity against microtubule associated protein 2 (Map2) and postsynaptic density 95 (PSD95) demonstrated that grafted cells had a higher survival rate and were able to differentiate toward neuronal phenotype with ability to form synapse-like structure at the injury site; this was also observed under the electron microscope. Immunostaining of neurofilament-200 (NF-200) showed that the number of nerve fibers regrowing into the injury site in full treatment group was much higher than that seen in other groups. Furthermore, Nissl staining revealed that host neuron survival rate was significantly increased in rats with full treatments. However, there were no biotin dextran amine (BDA) anterograde tracing fibers crossing through the injury site, suggesting the limited ability of corticospinal tract axonal regeneration. Taken together, although our artificial neural construct permits grafted cells to differentiate into neuronal phenotype, synaptogenesis, axonal regeneration and partial locomotor function recovery, the limited capacity for corticospinal tract axonal regeneration may affect its potential therapy in spinal cord injury.

Synaptic transmission of neural stem cells seeded in 3-dimensional PLGA scaffolds.

To explore therapeutic potential of engineered neural tissue, we combined genetically modified neural stem cells (NSCs) and poly(lactic acid-co-glycolic acid) (PLGA) polymers to generate an artificial neural network in vitro. NSCs transfected with either NT-3 or its receptor TrkC gene were seeded into PLGA scaffold. The NSCs were widely distributed and viable in the scaffold after culturing for 14 days. Immunoreactivity against Map2 was detected in >70% of these grafted cells, suggesting a high rate of differentiation toward neurons. Immunostaining of synapsin-I and PSD95 revealed formation of synaptic structures, which was also observed under electron microscope. Furthermore, using FM1-43 dynamic imaging, synapses in these differentiated neurons were found to be excitable and capable of releasing synaptic vesicles. Taken together, our artificial PLGA construct permits NSCs to differentiate toward neurons, establish connections and exhibit synaptic activities. These findings provide a biological basis for future application or transplantation of this artificial construct in neural repair.