Directional pumping of water and oil microdroplets on slippery surface.

Transporting water and oil microdroplets is important for applications ranging from water harvesting to biomedical analysis but remains a great challenge. This is due to the amplified contact angle hysteresis and insufficient driving force in the micrometer scale, especially for low-surface energy oil droplets. Coalescence of neighboring droplets, which releases vast additional surface energy, was often required, but its relatively uncontrollable nature brings uncertainties to the droplet motion, and the methodology is not applicable to single droplets. Here we introduce a strategy based on slippery surface with immobilized lubricant menisci to directionally transport microdroplets. By simply mounting hydrogel dots on slippery surface, the raised menisci remotely pump microdroplets via capillary force with high efficiency, regardless of droplet size or surface energy. By proof-of-concept experiments, we demonstrate that our method allows for highly efficient water droplet collection and highly sensitive biomedical analyte detection.

Emerging Applications of Bioinspired Slippery Surfaces in Biomedical Fields.

In this minireview, we summarize the recent development of liquid-infused slippery surfaces (LISS) for biomedical applications. The selected topics are divided into two parts: the material designs and emerging strategies to fabricate slippery surface, and their applications with strong and direct relevance to biomedical areas including antibiofouling, antithrombosis, medical device coatings and surface enhanced/assisted detection. We also describe the most critical directions in need of development to adapt this new approach to biomedical use.

The reciprocity principle in mulch film deterioration and microplastic generation.

Plastic film mulching stands as a globally employed agricultural technology pivotal to agricultural progress. Nevertheless, the environmental degradation of plastic mulch films underscores their role as a major source of secondary plastic pollutants, particularly microplastics. While a growing body of research has drawn attention to the rising issue of microplastic pollution and its environmental implications stemming from the use of plastic mulch films, there remains a significant knowledge gap regarding the kinetics and rate-limiting mechanisms governing the generation of microplastics during processes driven by plastic photodegradation. Moreover, a comprehensive quantification of the connection between mulch deterioration and the behavior of microplastic release and accumulation has yet to be fully realized. In this study, a kinetic equation was formulated to characterize the degradation of plastic mulch films and the subsequent release and accumulation of microplastics under light exposure. The results demonstrate that with increasing irradiation time, the change in the release rate exhibits a bell-shaped Gaussian probability distribution, while the cumulative alteration of microplastics follows a Gaussian distribution. Remarkably, once the exposure time reaches µ + 3σ, the accumulation plateaus at 99.7%. This research establishes a theoretical framework for the prospective assessment of plastic mulch lifespan and its environmental repercussions. Moreover, the findings provide valuable insights for optimizing plastic mulch design and devising strategies to mitigate microplastic pollution.

Comparative evaluation of soil accumulation of light stabilizers from biodegradable mulching films versus conventional polyethylene ones.

Light stabilizers are commonly used as additives in mulching films and have environmental persistence, bioaccumulation and ecotoxicity. However, their occurrence and distribution in mulching films and accumulation in mulched soils are seldom reported. This study firstly presents a comprehensive screening of 19 light stabilizers in 65 mulching films and 30 farmland soils collected in China, of which five and eight light stabilizers were 100% detected, respectively. The light stabilizer concentration in biodegradable mulching films was significantly higher than that in polyethylene ones, with median concentrations of 1.75 × 106 µg/kg and 4.86 × 103 µg/kg, respectively. Furthermore, a positive correlation was observed between the light stabilizer concentration in mulching films and in soils. This indicates that mulching films play a critical role in the accumulation of light stabilizers in farmland soils, and biodegradable mulching films significantly increase benzotriazole light stabilizers in soils. Although the light stabilizer concentration in farmland soil is relatively low, the sustainable quantities of mulching film input and the long-term accumulation will still pose a threat to the ecological environment and organism health. Consequently, our work reveals the occurrence and environmental risk of light stabilizers in mulching films and farmland soils and brings attention to light stabilizers in the soil environment.

Screening of optimal cleaning methods to reduce microplastic residues on strawberry surfaces: Characterization of microplastics in strawberry wash water.

Microplastics are widespread in facility strawberry greenhouses and can be deposited on the surface of strawberries through air currents. Investigating effective cleaning methods represents a viable strategy to reduce human ingestion of MPs. Therefore, different cleaning methods were compared: ultrasonic cleaning for 30 min, deionized water rinsing once, deionized water immersion for 30 min, and fruit immersion in washing salt for 30 min. The MPs in strawberry washing water were analyzed and compared using laser direct infrared imaging to investigate their characteristics and the optimal reduction of MPs on the surface of strawberries. The quality of the cleaning results was in the following order: water immersion > washing salt immersion > water rinsing > ultrasound. Water immersion was 1.3-2 times more effective in removing microplastics than other treatments. Furthermore, 21 polymer types were detected in the samples. Most MPs were less than 50 µm in size. The main polymers in this size range were polyamide, chlorinated polyethylene, and polyethylene terephthalate, and they mainly existed as fragments, fibers, and beads. This study provides a valuable reference for reducing human intake of microplastics through fresh fruits and vegetables.

Biofilm formation promoted biodegradation of polyethylene in Gordonia polyisoprenivorans B251 isolated from bacterial enrichment acclimated by hexadecane for two years.

Polyethylene (PE) mulch films have been widely used in agriculture and led to a significant pollution in cultivated soils. It is desirable to develop the sustainable method for the degradation of PE. As an environment friendly approach, microbial or enzymatic degradation of PE could meet this demanding. Thus, more microbial strains are required for illustrating biodegrading pathway and developing efficient biological method. In this study, Gordonia polyisoprenivorans B251 capable of degrading PE was isolated from bacterial enrichment with hexadecane as a sole carbon source for two years, in which genus Gordonia had dominated. As revealed by microbial growth curve, the strain B251 had the highest growth rate than other tested strains in the mediums either with hexadecane or PE particles as sole carbon source. The formation of biofilms in both enriched culture and G. polyisoprenivorans B251 pure culture attached to PE film was observed. The capability for PE degradation of individual strain was screened by 30-day incubation with PE film and confirmed by the presence of hydroxyl, carbonyl, carbon-carbon double bond and ether groups in FT-IR analysis and cracks on the surface of PE film observed by scanning electron microscopy (SEM). Therefore, Gordonia polyisoprenivorans, reported as their degradation of environmental contaminants in previous study, were also identified in current study as a candidate for polyethylene biodegradation.

Mitigation of greenhouse gas emissions and improved yield by plastic mulching in rice production.

Soil mulching technologies are effective practices which alleviate non-point source pollution and carbon emissions, while ensuring grain production security and increasing water productivity. However, the lack of comprehensive understanding of the impacts of mulching technologies on rice fields has hindered progress in global implementation due to the varying environments and application conditions under which they are implemented. This study conducted a meta-analysis based on 2412 groups of field experiment data from 313 studies to evaluate the effects of soil mulching methods on rice production, greenhouse gas (GHG) emissions and water use efficiency. The results show that plastic mulching, straw mulching and no mulching (PM, SM and NM) have reduced CH4 emissions (68.8 %, 61.4 % and 57.2 %), increased N2O emissions (84.8 %, 89.1 % and 96.6 %), reduced global warming potentials (50.7 %, 47.5 % and 46.8 %) and improved water use efficiency (50.2 %, 40.9 % and 34.0 %) compared with continuous flooding irrigation. However, PM increased rice yield (1.6 %), while SM and NM decreased yield (4.3 % and 9.2 %). Furthermore, analysis using random forest models revealed that rice yield, GHG emissions and WUE response to soil mulching were related to climate, soil properties, fertilizer and rice varieties. Our findings can guide the implementation of plastic mulching technology in priority areas, contribute to agricultural carbon neutrality and support the development of practical guidelines for farmers.

Kinetics of microplastic generation from different types of mulch films in agricultural soil.

Upon environmental weathering, plastic materials form smaller sized microplastics, of which the contamination in agricultural fields is of significant importance and increasing social concern. Plastic mulch films are considered a major source of agricultural soil microplastic pollution. However, the mechanism and kinetics of microplastic formation from plastic mulch films were rarely understood. In this study, the rate of microplastic generation from typical mulch films, such as oxodegradable, biodegradable, and conventional non-degradable (polyethylene, PE) mulch films, were quantified in soil under simulated UV irradiation. Results showed that microplastic formation was more rapid from biodegradable mulch film, followed sequentially by oxodegradable mulch film, white PE mulch film, and black PE mulch film. The kinetics of microplastic generation strictly followed the Schwarzchild's law, with exponential growth at indexes between 1.6309 and 2.0502 in the microplastic generation model. At a cumulative UV irradiation of 2.1 MJ/m2, the average quantity of microplastics released from biodegradable, oxodegradable, and white and black non-degradable mulch films were 475, 266, 163, 147 particles/cm2, respectively; with particle sizes largely distributed within 0.02-0.10 mm range. Concurrent increase in crystallinity and surface erosion of the mulch films were observed upon UV irradiation, which further determined the accessibility and activity of the materials to photo-oxidation (reflected as HI indexes), therefore played a critical role on the quantity and size ranges of microplastic debris.

Particulate-Aggregated Adhesives with Exudate-Sensitive Properties and Sustained Bacteria Disinfection to Facilitate Wound Healing.

Wound-associated infections create additional suffering and come at a high cost for patients and their families, which urgently require wound disinfection biomaterials with improved healing efficacy. Here, we report an adhesive with sustained bacteria disinfection ability, which is aggregated from hydrogen-bonded polymer particulates. The particulate-aggregated adhesive shows strong binding ability on different surfaces from rigid substrates to soft skins. Moreover, water-sensitive mechanical properties are shown in wound exudates, resulting from the dissociation of hydrogen bonds under the competition of water and thus the sustained release of particulates. Synergizing with the strong binding ability, exudate-sensitive behaviors, and sustained release of antibacterial particulates, the adhesive achieves sustained bactericidal activity and can facilitate the healing process in bacteria-infected skin wounds.

Mucus-Inspired Supramolecular Adhesives with Oil-Regulated Molecular Configurations and Long-Lasting Antibacterial Properties.

Inspired by mucus, which provides an ideal supramolecular model and whose fluid-like (viscous) and solid-like (elastic) behaviors can be adjusted to meet different physiological requirements, we report oil-regulated supramolecular adhesives by the co-assembly of polyurea oligomers and carvacrol oils. The adhesive is crosslinked by weak but abundant hydrogen bonds, which can be regulated by the incorporated carvacrol oils through the competition of intermolecular hydrogen bonds, presenting a unique set of mucus-mimicking features including oil-regulated mechanics, processability, reusable adhesivity, and extreme longevity in both air and water. Owing to the intrinsic bactericidal effect of the carvacrol oils, the developed adhesives can serve as potent antibacterial coatings with both rapid contact killing (99.9% killing within 15 min) and long-term controlled release abilities (up to 70 days), enabling versatile antibacterial applications in diverse conditions. We envision that these adhesives will be useful in buildings and architectures, community and public facilities, food storage and packaging technologies, functional textiles, and practical biomedical fields.

[Application of biodegradable plastic film to reduce plastic film residual pollution in Chinese agriculture].

Plastic film has become an important agriculture production material in recent years. Over the past three decades, the amount and application area of plastic film have increased steadily, and in 2014, which are 1.4 million tons and more than 180 million hm² respectively. It plays a key role for ensuring the supply of agricultural goods in China. Meanwhile, plastic film residual pollution becomes more and more serious, and in some regions, the amount of plastic film residues has reached over 250 kg/hm². In part of the Northwest region, soil structure of farmland has been destroyed by plastic film residues and then crop growth and farming operations were suppressed. It is recognized as a good choice to replace plastic film with biodegradable plastic film, an effective measure to solve the plastic film residue pollution. Now, it is in a critical stage of study and assessment of biodegradable plastic film in China and fortunately some biodegradable plastic films show effects in the production of potatoes, peanuts and tobacco. Overall, a series of challenges has still been faced by the biodegradable plastic film, mainly including improving the quality of biodegradable plastic products, such as tensile strength, flexibility, improving the controllability of rupture and degradation, enhancing the ability of increasing soil temperature and preserving soil moisture, and to satisfy the demand of crops production with mulching. In addition, it is essential to reduce the cost of the biodegradable film and promote the application of biodegradable film on large-scale. With the development of biodegradable plastic technology and agricultural production environment, the application of the biodegradable film will have a good future.