Artificial intelligence-assisted determination of available sites for palatal orthodontic mini implants based on palatal thickness through CBCT.

OBJECTIVES: To develop an artificial intelligence (AI) system for automatic palate segmentation through CBCT, and to determine the personalized available sites for palatal mini implants by measuring palatal bone and soft tissue thickness according to the AI-predicted results. MATERIALS AND METHODS: Eight thousand four hundred target slices (from 70 CBCT scans) from orthodontic patients were collected, labelled by well-trained orthodontists and randomly divided into two groups: a training set and a test set. After the deep learning process, we evaluated the performance of our deep learning model with the mean Dice similarity coefficient (DSC), average symmetric surface distance (ASSD), sensitivity (SEN), positive predictive value (PPV) and mean thickness percentage error (MTPE). The pixel traversal method was proposed to measure the thickness of palatal bone and soft tissue, and to predict available sites for palatal orthodontic mini implants. Then, an example of available sites for palatal mini implants from the test set was mapped. RESULTS: The average DSC, ASSD, SEN, PPV and MTPE for the segmented palatal bone tissue were 0.831%, 1.122%, 0.876%, 0.815% and 6.70%, while that for the palatal soft tissue were 0.741%, 1.091%, 0.861%, 0.695% and 12.2%, respectively. Besides, an example of available sites for palatal mini implants was mapped according to predefined criteria. CONCLUSIONS: Our AI system showed high accuracy for palatal segmentation and thickness measurement, which is helpful for the determination of available sites and the design of a surgical guide for palatal orthodontic mini implants.

Spatial distribution, source identification, and transportation paths of plutonium in the Beibu Gulf, South China Sea.

To investigate the spatial distribution and source of plutonium isotopes in the Beibu Gulf, surface sediments were collected and analyzed using sector field inductively coupled plasma mass spectrometry (SF-ICP-MS). The activities of 239+240Pu in surface sediments ranged from 0.012 to 0.451 mBq/g (mean: 0.171 ± 0.138 mBq/g, n = 36), indicating a decreasing trend in a counterclockwise direction from the southern bay mouth. The counterclockwise decreasing trend in the south of the bay mouth is similar to the current in the Beibu Gulf. The 240Pu/239Pu atom ratios in surface sediments ranged from 0.156 to 0.283 (mean: 0.236 ± 0.031, n = 36), slightly higher than that of the global fallout value of 0.18. This suggests that the Pu in the Beibu Gulf was a combination of global fallout and Pacific Proving Ground (PPG). The average contribution of the plutonium (Pu) derived from the PPG in the sediment was estimated to be 52 % ± 24 %.

Biomechanical study of the atlantoaxial joint after artificial atlanto-odontoid joint arthroplasty.

OBJECTIVE: To investigate the stability and three-dimensional movements of the atlantoaxial joint after artificial atlanto-odontoid joint (AAOJ) arthroplasty by comparing with a conventional method. METHODS: After anterior decompression, 24 human cadaveric spinal specimens of C0-C3 were randomly divided into two groups: Group A receiving artificial AAOJ arthroplasty; Group B experiencing anterior transarticular screw (ATAS) fixation. Two groups underwent flexibility test in intact and instrumented states. Rotational angle of the C0-C3 segments was measured to study the immediate stability and function of anterior decompression with AAOJ arthroplasty compared with the intact state and ATAS fixation. RESULTS: Compared with the intact state, anterior decompression with AAOJ arthroplasty resulted in a significant decrease in the range of motion (ROM) and neutral zone (NZ) during flexion, extension and lateral bending (P less than 0.05); however, with regard to axial rotation, there was no significant difference in ROM and NZ (P larger than 0.05). Compared with anterior decompression with ATAS fixation, anterior decompression with AAOJ arthroplasty during flexion, extension and lateral bending, significant difference was found in ROM and NZ (P larger than 0.05); however, as for axial rotation, there was a significant increase in ROM and NZ (P less than 0.05). CONCLUSION: The self-designed AAOJ has an excellent biomechanical performance, which can restore excellent instant stability and preserve the movement of the atlantoaxial joint.

[Evaluation of the effectiveness of treatment of 16 patients with tongue microcystic lymphatic malformation using bipolar coagulation forceps combined with 1% lauromacrogol foam sclerotherapy].

PURPOSE: To investigate the clinical efficacy and safety of bipolar coagulation forceps combined with 1% lauromacrogol foam sclerotherapy in the treatment of microcystic lymphatic malformation of tongue. METHODS: The clinical data of 16 patients with microcystic lymphatic malformation of the tongue admitted to the Department of Stomatology of Foshan First People's Hospital from April 2017 to April 2020 were retrospectively analyzed, including 7 males and 9 females, aging from 15 months to 21 years. The average age of patients was 8.32±1.21 years. The efficacy and complications of the patients were evaluated. RESULTS: All 16 patients were followed up for 6 to 12 months. The clinical response was evaluated as eleven patients (68.75%) for grade Ⅳ, three (18.75%) for grade Ⅲ, two (12.5%) for grade Ⅱ, and the effective rate was 87.5%. Necrosis of tongue mucosa and muscle occurred in 1 patient. CONCLUSIONS: Bipolar coagulation forceps combined with 1% lauromacrogol foam sclerotherapy is a minimally invasive, safe and effective treatment for tongue microcystic lymphatic malformation.

Reversible Dendritic-Crystal-Reinforced Polymer Gel for Bioinspired Adaptable Adhesive.

High-strength and reversible adhesion technology, which is a universal phenomenon in nature but remains challenging for artificial synthesis, is essential for the development of modern science. Existing adhesive designs without interface versatility hinder their application to arbitrary surfaces. Bioinspired by creeper suckers, a crystal-fiber reinforced polymer gel adhesive with ultrastrong adhesion strength and universal interface adaptability is creatively prepared via introducing a room-temperature crystallizable solvent into the polymer network. The gel adhesive formed by hydrogen bonding interaction between crystal fibers and polymer network can successfully realize over 9.82 MPa reversible adhesion strength for rough interface and 406.87 J m-2 peeling toughness for skin tissue. In situ anchoring is achieved for adapting to different geometrical surfaces. The adhesion performance can be significantly improved with the further increase of the interfacial roughness and hydrophilicity, whose dissipation mechanism is simulated by finite element analysis. The melting-crystallization equilibrium of the crystal fibers is proved by synchrotron radiation scattering. Accordingly, reversible phase-transition triggered by light and heat can realize the controlled adhere-detach recycle. Later adjustments to the monomers or crystals are expected to broaden its applications to various fields such as bioelectronics, electronic processing, and machine handling.

Development and assessment of the efficacy and safety of human lung-targeting liposomal methylprednisolone crosslinked with nanobody.

Glucocorticoid (GC) hormone has been commonly used to treat systemic inflammation and immune disorders. However, the side effects associated with long-term use of high-dose GC hormone limit its clinical application seriously. GC hormone that can specifically target the lung might decrease the effective dosage and thus reduce GC-associated side effects. In this study, we successfully prepared human lung-targeting liposomal methylprednisolone crosslinked with nanobody (MPS-NSSLs-SPANb). Our findings indicate that MPS-NSSLs-SPANb may reduce the effective therapeutic dosage of MPS, achieve better efficacy, and reduce GC-associated side effects. In addition, MPS-NSSLs-SPANb showed higher efficacy and lower toxicity than conventional MPS.

Simvastatin delivery on PEEK for bioactivity and osteogenesis enhancements.

A strategy developed for obtaining positive cellular responses remains to be focused in the filed of functional biomimetics. In this study, a hydrogel covered simvastatin-loaded polyetheretherketone (PEEK) bio-composites was constructed with the purpose of bone tissue regeneration therapy. Briefly, a three-dimensional (3D) porous structure was fabricated on PEEK surface; then the substrate was functionalized with the poly(L-lactic acid)/simvastatin porous film and hyaluronic acid hydrogel subsequently. In vitro cell attachment, proliferation, and cytoskeletal observation experiments reveal that our scaffolds show better bio-affinity due to the layer of hyaluronic acid hydrogel compared with control. Furthermore, the alkaline phosphatase activity, calcium mineral deposition evaluation, and gene expression for osteogenic potential all exhibit that the superior osteogenic differentiation of MC3T3-E1 pre-osteoblasts on our scaffolds. Therefore, our PEEK samples loaded with simvastatin and covered with hyaluronic acid hydrogel hold great potential in clinical applications for bone repair.

Biomechanical evaluation of stability and three-dimensional movements of the atlantoaxial joint after artificial atlanto-odontoid joint arthroplasty.

OBJECTIVE: To investigate the stability and three-dimensional movements of the atlantoaxial joint after artificial atlanto-odontoid joint (AAOJ) arthroplasty. METHOD: Ten sets of AAOJ implanted in bony specimens from 10 adults were used to test the pull-out strength of the atlas-axis components with a MTS858 Mini Bionix machine. Another twelve human cadaveric specimens including C(0)-C(4) were used to evaluate the three-dimensional movements of C(1)-C(2) under five different conditions in sequence, that is, the complete specimen, anterior decompression, posterior transarticular screws fixation, AAOJ arthroplasty and fatigue test. RESULT: There were significant differences between atlas and axis components in the maximum pull-out strength and trajectory length, however the yield length was not significantly different. The maximum pull-out strength of the atlas and axis was positively correlated with trajectory length (r(1)= 0.880, P < 0.05) and yield length (r(2)= 0.606, P < 0.05), respectively. After AAOJ arthroplasty, the range of movement (ROM) with respect to rotation and the neutral zone of the atlantoaxial joint were close to normal (P > 0.05), but the ROM in flexion-extension and lateral bending was significantly smaller compared with the specimens which underwent anterior decompression (P < 0.05). No abrasion and abnormal mobilization were observed after 2000 cycles of flexion, extension, lateral bending and axial rotation in the fatigue test. CONCLUSIONS: The self-designed AAOJ has excellent biomechanical performance, and AAOJ arthroplasty can restore excellent instant stability and preserve the movement of the atlantoaxial joint.

[Quantification and phenotypic analysis of hCMV specific CTL in peripheral blood from HLA-A2+ donors].

AIM: To optimize tetramer staining condition using HLA-A*0201 tetramer (A2-NLV tetramer) loaded with NLV peptide (pp65(495-503)) derived from structural protein pp65 of human cytomegalovirus and to investigate its application in phenotyping of specific cytotoxic T lymphocytes (CTL). METHODS: Peripheral blood from HLA-A2(+) donors was first stained with A2-NLV tetramer/PE under different conditions and then labeled with anti-CD3-FITC and anti-CD8-APC. The stained samples were analyzed with flow cytometry to find out the optimized staining condition. Meanwhile, the phenotype and activation antigen expression were determined. RESULTS: Tetramer staining with whole blood was superior to peripheral blood mononuclear cells. The optimized condition for tetramer staining was incubating 100 muL of whole blood with 0.3 mug of A2-NLV tetramer for 1 h at 4 degrees Celsius. Under this condition the specific staining was strong while unspecific staining of CD8(-) T cells was quite weak. Phenotypic analysis under this condition showed that the ratio of CD28 positive A2-NLV tetramer specific CTL was lower than that of nonspecific CTL, whereas the ratio of CD57 positive specific CTL was higher than that of nonspecific CTL. CD25 molecules were only expressed on the activated specific CTL. CONCLUSION: The optimized tetramer staining condition can increase the specificity of tetramer staining and decrease unspecific binding, therefore it is applicable for phenotyping and functional analysis of antigen-specific CTL.