Metallic phase enabling MoS2 nanosheets as an efficient sonosensitizer for photothermal-enhanced sonodynamic antibacterial therapy.

Two-dimensional (2D) transition metal dichalcogenide (TMD) nanosheets (e.g., MoS2) with metallic phase (1T or 1T´ phase) have been proven to exhibit superior performances in various applications as compared to their semiconducting 2H-phase counterparts. However, it remains unclear how the crystal phase of 2D TMD nanosheets affects their sonodynamic property. In this work, we report the preparation of MoS2 nanosheets with different phases (metallic 1T/1T´ or semiconducting 2H) and exploration of its crystal-phase effect on photothermal-enhanced sonodynamic antibacterial therapy. Interestingly, the defective 2D MoS2 nanosheets with high-percentage metallic 1T/1T´ phase (denoted as M-MoS2) present much higher activity towards the ultrasound-induced generation of reactive oxygen species (ROS) as compared to the semiconducting 2H-phase MoS2 nanosheets. More interestingly, owing to its metallic phase-enabled strong absorption in the near-infrared-II (NIR-II) regime, the ultrasound-induced ROS generation performance of the M-MoS2 nanosheets can be further enhanced by the photothermal effect under a 1064 nm laser irradiation. Thus, after modifying with polyvinylpyrrolidone, the M-MoS2 nanosheets can be used as an efficient sonosensitizer for photothermal-enhanced sonodynamic bacterial elimination under ultrasound treatment combining with NIR-II laser irradiation. This study demonstrates that metallic MoS2 nanosheets can be used as a promising sonosensitizer for antibacterial therapy, which might be also promising for cancer therapies.

Interactions of octahedral ruthenium(II) polypyridyl complexes with the RNA triplex poly(U)•poly(A)*poly(U) effect on the third-strand stabilization.

Stable triplexes play key roles in many biological processes. Due to the Hoogsteen base pairing, triplexes are, however, thermodynamically less stable than the corresponding duplexes. The poor stabilization of these structures limits their practical applications under physiological conditions. To understand the factors effect on the stabilization of RNA triplexes by octahedral ruthenium(II) complexes, the interactions of [RuL2(uip)](2+) {where L = 2,2'-bipyridine (bpy) or 1,10-phenanthroline phen, uip = 2-(5-uracil)-1H-imidazo[4,5-f][1,10]phenanthroline} with the RNA triplex poly(U)•poly(A)*poly(U) are examined by spectrophotometry, spectrofluorometry, circular dichroism, and viscosimetry in this work. The main results obtained here suggest that the third-strand stabilization depends on the hydrophobicity effects of ancillary ligands bpy and phen.

Fractionation of lignin from rice straw using an acidified biphasic solvent system.

To obtain lignin from lignocellulosic biomass, phenoxyethanol (EPH) was employed to construct a biphasic solvent system. The concentration of EPH in this biphasic solvent system was first studied to determine a pretreatment condition for fractionation of lignin. Then, the fractionation of lignin from rice straw was performed under the conditions of temperature 130 °C, cooking time 60 min and sulfuric acid concentration 0.1 M, in 70 % aqueous EPH solvent system. The results showed that 50.97 %, 49.52 % or 82.02 % of the removed lignin with the purity of 89.04 %, 91.30 % or 84.76 % was regenerated from EPH liquor using dimethyl carbonate (DMC), dimethoxymethane (DMM) or diethyl ether (DE) as precipitant, respectively. Additionally, the weight-average molecular weight (Mw) and dispersity index (D) of the regenerated lignin decreased to 4247-4809 g/mol and 1.26-1.60 compared with that of the original lignin (5654 g/mol and 4.78). Finally, the compositional and structural characteristics of lignin, e.g., molecular weight and molecular structure, were also investigated by DSC, HSQC and elemental analysis.

Biphasic fractionation of lignocellulosic biomass based on the combined action of pretreatment severity and solvent effects on delignification.

A novel method based on pretreatment severity and solvent effects on delignification, was introduced to pretreat and fractionate lignocellulose in a 2-phenoxyethanol (EPH) biphasic solvent system. The combined severity factor (CSF) was used to regulate pretreatment severity, and the relative energy difference (RED) of solvent system to lignin was used to evaluate solvent effects. The combined action of pretreatment severity and solvent effects on delignification was first investigated by the response surface regression analysis on the pretreatment of Amorpha. Accordingly, pretreatment and fractionation of Amorpha, poplar and corn straw were then conducted under the optimized conditions. Results showed that >99 % lignin was removed after pretreatment with CSF 3.7845 in a solvent system with RED 0.9371, and 42.94 %, 39.41 % and 70.90 % lignin from Amorpha, poplar and corn straw were respectively regenerated from organosolv liquor after fractionation. Finally, the regenerated products were characterized by FTIR, TG and GPC analysis.

Different methods of vaginal preparation before cesarean delivery to prevent postoperative infection: a systematic review and network meta-analysis.

OBJECTIVE: Precesarean vaginal antisepsis can benefit pregnant women with ruptured membranes. However, in the general population, recent trials have shown mixed results in reducing postoperative infections. This study aimed to systematically review clinical trials and summarize the most suitable vaginal preparations for cesarean delivery in preventing postoperative infection. DATA SOURCES: We searched PubMed, Web of Science, Cochrane Library, SinoMed databases, and the ClinicalTrials.gov clinical trials registry for randomized controlled trials and conference presentations (past 20 years, 2003-2022). Reference lists of previous meta-analyses were searched manually. In addition, we conducted subgroup analysis on the basis of whether the studies were conducted in developed or developing countries, whether the membranes were ruptured, and whether patients were in labor. STUDY ELIGIBILITY CRITERIA: We included randomized controlled trials comparing vaginal preparation methods for the prevention of postcesarean infection with each other or with negative controls. METHODS: Two reviewers independently extracted data and assessed the risk of bias and the certainty of the evidence. The effectiveness of prevention strategies was assessed by frequentist-based network meta-analysis models. The outcomes were endometritis, postoperative fever, and wound infection. RESULTS: A total of 23 trials including 10,026 cesarean delivery patients were included in this study. Vaginal preparation methods included 19 iodine-based disinfectants (1%, 5%, and 10% povidone-iodine; 0.4% and 0.5% iodophor) and 4 guanidine-based disinfectants (0.05% and 0.20% chlorhexidine acetate; 1% and 4% chlorhexidine gluconate). Overall, vaginal preparation significantly reduced the risks of endometritis (3.4% vs 8.1%; risk ratio, 0.41 [0.32-0.52]), postoperative fever (7.1% vs 11.4%; risk ratio, 0.58 [0.45-0.74]), and wound infection (4.1% vs 5.4%; risk ratio, 0.73 [0.59-0.90]). With regard to disinfectant type, iodine-based disinfectants (risk ratio, 0.45 [0.35-0.57]) and guanidine-based disinfectants (risk ratio, 0.22 [0.12-0.40]) significantly reduced the risk of endometritis, and iodine-based disinfectants reduced the risk of postoperative fever (risk ratio, 0.58 [0.44-0.77]) and wound infection (risk ratio, 0.75 [0.60-0.94]). With regard to disinfectant concentration, 1% povidone-iodine was most likely to simultaneously reduce the risks of endometritis, postoperative fever, and wound infection. CONCLUSION: Preoperative vaginal preparation can significantly reduce the risk of postcesarean infectious diseases (endometritis, postoperative fever, and wound infection); 1% povidone-iodine has particularly outstanding effects.

An Intrinsically Magnetic Epicardial Patch for Rapid Vascular Reconstruction and Drug Delivery.

Myocardial infarction (MI) is a major cause of mortality worldwide. The major limitation of regenerative therapy for MI is poor cardiac retention of therapeutics, which results from an inefficient vascular network and poor targeting ability. In this study, a two-layer intrinsically magnetic epicardial patch (MagPatch) prepared by 3D printing with biocompatible materials like poly (glycerol sebacate) (PGS) is designed, poly (ε-caprolactone) (PCL), and NdFeB. The two-layer structure ensured that the MagPatch multifariously utilized the magnetic force for rapid vascular reconstruction and targeted drug delivery. MagPatch accumulates superparamagnetic iron oxide (SPION)-labelled endothelial cells, instantly forming a ready-implanted organization, and rapidly reconstructs a vascular network anastomosed with the host. In addition, the prefabricated vascular network within the MagPatch allowed for the efficient accumulation of SPION-labelled therapeutics, amplifying the therapeutic effects of cardiac repair. This study defined an extendable therapeutic platform for vascularization-based targeted drug delivery that is expected to assist in the progress of regenerative therapies in clinical applications.

A Vehicle-Free Antimicrobial Polymer Hybrid Gold Nanoparticle as Synergistically Therapeutic Platforms for Staphylococcus aureus Infected Wound Healing.

Pathogenic bacteria infection is a serious threat to human public health due to the high morbidity and mortality rates. Nano delivery system for delivering antibiotics provides an alternative option to improve the efficiency compared to conventional therapeutic agents. In addition to the drug loading capacity of nanocarriers, which is typically around 10%, further lowers the drug dose that pathological bacteria are exposed to. Moreover, nanocarriers that are not eliminated from the body may cause side effects. These limitations have motivated the development of self-delivery systems that are formed by the self-assembly of different therapeutic agents. In this study, a vehicle-free antimicrobial polymer polyhexamethylene biguanide (PHMB, with bactericidal and anti-biofilm functions) hybrid gold nanoparticle (Au NPs, with photothermal therapy (PTT)) platform (PHMB@Au NPs) is developed. This platform exhibits an excellent synergistic effect to enhance the photothermal bactericidal effect for Staphylococcus aureus under near-infrared irradiation. Furthermore, the results showed that PHMB@Au NPs inhibit the formation of biofilms, quickly remove bacteria to promote wound healing through PTT in infection model in vivo, and even mediate the transition of macrophages from M1 to M2 type, and accelerate tissue angiogenesis. PHMB@Au NPs will have promising value as highly effective antimicrobial agents for patient management.

Biocompatible Hydrogels Based on Food Gums with Tunable Physicochemical Properties as Scaffolds for Cell Culture.

Hydrogels composed of food gums have gained attention for future biomedical applications, such as targeted delivery and tissue engineering. For their translation to clinical utilization, reliable biocompatibility, sufficient mechanical performance, and tunable structure of polysaccharide hydrogels are required aspects. In this work, we report a unique hybrid polysaccharide hydrogel composed of salecan and curdlan, in which the former is a thickening agent and the latter serves as a network matrix. The physicochemical properties, such as mechanical strength, thermal stability, swelling, and morphology, of the developed composite hydrogel can be accurately modulated by varying the polysaccharide content. Importantly, cytotoxicity assays show the non-toxicity of this hybrid hydrogel. Furthermore, this hydrogel system can support cell proliferation, migration, and function. Altogether, our work proposes a new strategy to build a polysaccharide-constructed hydrogel scaffold, which holds much promise for tissue engineering in terms of cell engraftment, survival, proliferation, and function.

Facile formation of salecan/agarose hydrogels with tunable structural properties for cell culture.

Salecan polysaccharide produced by Agrobacterium sp. ZX09 is an attractive biopolymer to construct hydrogel scaffolds for cell culture. However, some limitations such as poor mechanical performance, complicated fabrication process and slow gelation times still exist in the biomedical applications of microbial-based salecan polysaccharide hydrogels. Here, a series of polysaccharide hydrogels composed of salecan and agarose with adjustable structural properties are designed. The resultant hybrid salecan/agarose hydrogels exhibit controllable physical and chemical properties including thermal stability, water uptake, mechanical strength and microarchitecture, which can be readily realized with minimum change of the polysaccharide content. Furthermore, cytotoxicity assays reveal that the designed composite hydrogels are non-toxic. More importantly, these hydrogels support cell survival, proliferation, and migration. Together, this work opens up a new avenue to build polysaccharide hydrogel platforms for tissue engineering.