Amphiphilic Star Polypept(o)ides as Nanomeric Vectors in Mucosal Drug Delivery.

Mucosal delivery across the gastrointestinal (GI) tract, airways, and buccal epithelia is an attractive mode of therapeutic administration, but the challenge is to overcome the mucus and epithelial barriers. Here, we present degradable star polypept(o)ides capable of permeating both barriers as a promising biomaterial platform for mucosal delivery. Star polypept(o)ides were obtained by the initiation of benzyl-l-glutamate N-carboxyanhydride (NCA) from an 8-arm poly(propyleneimine) (PPI) dendrimer, with subsequent chain extension with sarcosine NCA. The hydrophobic poly(benzyl-l-glutamate) (PBLG) block length was maintained at 20 monomers, while the length of the hydrophilic poly(sarcosine) (PSar) block ranged from 20-640 monomers to produce star polypept(o)ides with increasing hydrophilic: hydrophobic ratios. Transmission electron microscopy (TEM) images revealed elongated particles of ∼120 nm length, while dynamic light scattering (DLS) provided evidence of a decrease in the size of polymer aggregates in water with increasing poly(sarcosine) block length, with the smallest size obtained for the star PBLG20-b-PSar640. Fluorescein isothiocyanate (FITC)-conjugated PBLG20-b-PSar640 permeated artificial mucus and isolated rat mucus, as well as rat intestinal jejunal tissue mounted in Franz diffusion chambers. An apparent permeability coefficient (Papp) of 15.4 ± 3.1 ×10-6 cm/s for FITC-PBLG20-b-PSar640 was calculated from the transepithelial flux obtained with the apical-side addition of 7.5 mg polypept(o)ide to jejunal tissue over 2 h. This Papp could not be accounted for by flux of unconjugated FITC. Resistance to trypsin demonstrated the stability of FITC-labeled polypept(o)ide over 2 h, but enzymatic degradation at the mucus-epithelial interface or during flux could not be ruled out as contributing to the Papp. The absence of any histological damage to the jejunal tissue during the 2 h exposure suggests that the flux was not associated with overt toxicity.

Molecular environment and reactivity in gels and colloidal solutions under identical conditions.

A PEG-Tyr block copolymer forms a kinetically stable colloidal solution in water at room temperature which undergoes an irreversible conversion to a gel phase upon heating. A micellar solution and a gel can therefore be studied under identical experimental conditions. This made it possible to compare physical properties and chemical reactivity of micelles and gels in identical chemical environments and under identical conditions. EPR spectra of the spin-labelled copolymer showed that tyrosine mobility in gels was slightly reduced compared to micelles. Chemical reactivity was studied using photochemical degradation of tyrosine and tyrosine dimerization, in the absence and in the presence of an Fe(iii) salt. The reactivity trends were explained by reduced tyrosine mobility in the gel environment. The largest reactivity difference in gels and micelles was observed for bimolecular dityrosine formation which was also attributed to the reduction in molecular mobility.

Bioinspired Star-Shaped Poly(l-lysine) Polypeptides: Efficient Polymeric Nanocarriers for the Delivery of DNA to Mesenchymal Stem Cells.

The field of tissue engineering is increasingly recognizing that gene therapy can be employed for modulating in vivo cellular response thereby guiding tissue regeneration. However, the field lacks a versatile and biocompatible gene delivery platform capable of efficiently delivering transgenes to mesenchymal stem cells (MSCs), a cell type often refractory to transfection. Herein, we describe the extensive and systematic exploration of three architectural variations of star-shaped poly(l-lysine) polypeptide (star-PLL) with varying number and length of poly(l-lysine) arms as potential nonviral gene delivery vectors for MSCs. We demonstrate that star-PLL vectors are capable of self-assembling with pDNA to form stable, cationic nanomedicines. Utilizing high content screening, live cell imaging, and mechanistic uptake studies we confirm the intracellular delivery of pDNA by star-PLLs to MSCs is a rapid process, which likely proceeds via a clathrin-independent mechanism. We identify a star-PLL composition with 64 poly(l-lysine) arms and five l-lysine subunits per arm as a particularly efficient vector that is capable of delivering both reporter genes and the therapeutic transgenes bone morphogenetic protein-2 and vascular endothelial growth factor to MSCs. This composition facilitated a 1000-fold increase in transgene expression in MSCs compared to its linear analogue, linear poly(l-lysine). Furthermore, it demonstrated comparable transgene expression to the widely used vector polyethylenimine using a lower pDNA dose with significantly less cytotoxicity. Overall, this study illustrates the ability of the star-PLL vectors to facilitate efficient, nontoxic nucleic acid delivery to MSCs thereby functioning as an innovative nanomedicine platform for tissue engineering applications.

Degradable 3D-Printed Hydrogels Based on Star-Shaped Copolypeptides.

We present a star copolypeptide-based hydrogel ink capable of structural microfabrication using 3D extrusion printing. The material comprises an amphiphilic block copolymer structure of poly(benzyl-l-glutamate)- b-oligo(l-valine), which spontaneously forms hydrogels through hydrophobic interactions. The chemical design allows the bulk phase of the hydrogel to remain intact after application of shear due to its self-recovery behavior. It is demonstrated that the composition of the materials is ideally suited for 3D printing with scaffolds capable of maintaining structural cohesion after extrusion. Post extrusion UV-triggered fixation of the printed structures is carried out, resulting in stable hydrogel constructs. The constructs were found to be degradable, exhibited favorable release of encapsulated molecular cargo, and do not appear to affect the metabolic health of the commonly used fibroblastic cell line Balb/3T3 in the absence of the reactive diluent N, N'-methylenebis(acrylamide). The star copolypeptide inks allow for rapid prototyping enabling the fabrication of defined intricate microstructures, providing a platform for complex scaffold development that would otherwise be unattainable with other processing techniques such as molding or casting.

Synthesis and gelation of copolypept(o)ides with random and block structure.

Copolypept(o)ides of polysarcosine (PSar) and poly(N-isopropyl-L-glutamine) (PIGA) with random and block sequence structures were synthesized by ring-opening polymerization (ROP) of sarcosine N-carboxyanhydrides (Sar-NCA) and γ-benzyl-l-glutamate N-carboxyanhydrides (BLG-NCA) and post modification. With different distribution of Sar along the main chain, H-bonding pattern and secondary structure of polypeptides were turned, as well as aggregation and gelation behavior. Both copolypept(o)ides formed hydrogels above their critical gelation concentrations (CGCs) without thermo-sensitivity, which was normally reserved for PEG copolypeptides (eg, PEG-b-PIGA). In particular, a different mechanism from previously reported micellar percolation or fibrillar entanglement was suggested for gelation of the random copolypept(o)ide. Therefore, hydrogels from copolymers of PSar and PIGA represented a new approach to construct easy-handling, biocompatible, biodegradable and thermo-stable gels that could potentially be applied in biomedical fields.

Direct UV-Triggered Thiol-ene Cross-Linking of Electrospun Polyester Fibers from Unsaturated Poly(macrolactone)s and Their Drug Loading by Solvent Swelling.

Electrospinning is considered a relatively simple and versatile technique to form high porosity porous scaffolds with micron to nanoscale fibers for biomedical applications. Here, electrospinning of unsaturated aliphatic polyglobalide (PGl) into well-defined fibers with an average diameter of 9 µm is demonstrated. Addition of a dithiol cross-linker and a photoinitiator to the polymer solution enabled the UV-triggered intracross-linking of the fibers during the spinning process. The in situ cross-linking of the fibers resulted in amorphous material able to swell up to 14% in tetrahydrofurane (THF) without losing the fiber morphology. Seeding mesenchymal stem cells (MSCs) onto both cross-linked and non-cross-linked PGl fibers proved their compatibility with MSCs and suitability as scaffolds for cell growth and proliferation of MSCs. Moreover, the ability to directly load cross-linked PGl with hydrophobic molecules by soaking the fiber mesh in solution is shown with Rhodamine B and Indomethacin, a hydrophobic anti-inflammatory drug. This marks an advantage over conventional aliphatic polyesters and opens opportunities for the design of drug loaded polyester scaffolds for biomedical applications or tissue engineering.

Antimicrobial spectrum against wound pathogens and cytotoxicity of star-arranged poly-l-lysine-based antimicrobial peptide polymers.

Introduction. As growing numbers of patients are at higher risk of infection, novel topical broad-spectrum antimicrobials are urgently required for wound infection management. Robust pre-clinical studies should support the development of such novel antimicrobials.Gap statement. To date, evidence of robust investigation of the cytotoxicity and antimicrobial spectrum of activity of antimicrobial peptides (AMP)s is lacking in published literature. Using a more clinical lens, we address this gap in experimental approach, building on our experience with poly-l-lysine (PLL)-based AMP polymers.Aim. To evaluate the in vitro bactericidal activity and cytotoxicity of a PLL-based 16-armed star AMP polymer, designated 16-PLL10, as a novel candidate antimicrobial.Methods. Antimicrobial susceptibilities of clinical isolates and reference strains of ESKAPE (Enterococcus spp., Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, Enterobacter spp.) pathogens, to 16-PLL10 were investigated. Human erythrocyte haemolysis and keratinocyte viability assays were used to assess toxicity. Modifications were made to 16-PLL10 and re-evaluated for improvement.Results. Minimum bactericidal concentration of 16-PLL10 ranged from 1.25 µM to ≥25 µM. At 2.5 µM, 16-PLL10 was broadly bactericidal against ESKAPE strains/wound isolates. Log-reduction in colony forming units (c.f.u.) per millilitre after 1 h, ranged from 0.3 (E. cloacae) to 5.6 (K. pneumoniae). At bactericidal concentrations, 16-PLL10 was toxic to human keratinocyte and erythrocytes. Conjugates of 16-PLL10, Trifluoroacetylated (TFA)-16-PLL10, and Poly-ethylene glycol (PEG)ylated 16-PLL10, synthesised to address toxicity, only moderately reduced cytotoxicity and haemolysis.Conclusions. Due to poor selectivity indices, further development of 16-PLL10 is unlikely warranted. However, considering the unmet need for novel topical antimicrobials, the ease of AMP polymer synthesises/modification is attractive. To support more rational development, prioritising clinically relevant pathogens and human cells, to establish selective toxicity profiles in vitro, is critical. Further characterisation and discovery utilising artificial intelligence and computational screening approaches can accelerate future AMP nanomaterial development.

Supramolecular hydrogels with reverse thermal gelation properties from (oligo)tyrosine containing block copolymers.

Novel block copolymers comprising poly(ethylene glycol) (PEG) and an oligo(tyrosine) block were synthesized in different compositions by N-carboxyanhydride (NCA) polymerization. It was shown that PEG2000-Tyr(6) undergoes thermoresponsive hydrogelation at a low concentration range of 0.25-3.0 wt % within a temperature range of 25-50 °C. Cryogenic transmission electron microscopy (Cryo-TEM) revealed a continuous network of fibers throughout the hydrogel sample, even at concentrations as low as 0.25 wt %. Circular dichroism (CD) results suggest that better packing of the ß-sheet tyrosine block at increasing temperature induces the reverse thermogelation. A preliminary assessment of the potential of the hydrogel for in vitro application confirmed the hydrogel is not cytotoxic, is biodegradable, and produced a sustained release of a small-molecule drug.

Synthesis of polypeptide block copolymer hybrids by the combination of N-carboxyanhydride polymerization and RAFT.

The synthesis of hybrid bioconjugates via the ring-opening polymerization (ROP) of N-carboxyanhydrides (NCAs) using a synthetic macroinitiator is described. Poly(n-butyl acrylate), polystyrene, and poly(N-isopropyl acrylamide) are synthesized (polydisperity index, D < 1.1) using reversible addition-fragmentation chain transfer (RAFT) as the synthetic tool. A phthalimidomethyl trithiocarbonate RAFT chain transfer agent is used to prepare well-defined, end-functional polymers, which after deprotection result in amine terminal macroinitiators. The subsequent initiating systems could successfully be chain extended with ε-benzyloxycarbonyl-l-lysine or γ-benzyl-l-glutamate as the NCAs to produce a library of polymer-polypeptide conjugates. In doing so, a novel procedure for directly synthesizing bioconjugates via a non-modular route without the need for excessive purification and isolation steps is described.

Synthetic glycopolypeptides as potential inhibitory agents for dendritic cells and HIV-1 trafficking.

Multivalent binding is a key for many critical biological processes and unique recognition and specificity in binding enables many of different glycans and proteins to work in a great harmony within the human body. In this study, the binding kinetics of synthetic glycopolypeptides to the dendritic cell lectin DC-SIGN and their inhibition potential for DC-SIGN interactions with the gp120 envelope glycoprotein of HIV-1 (gp120) are investigated.

Biologically active polymersomes from amphiphilic glycopeptides.

Polypeptide block copolymers with different block length ratios were obtained by sequential ring-opening polymerization of benzyl-L-glutamate and propargylglycine (PG) N-carboxyanhydrides. Glycosylation of the poly(PG) block was obtained by Huisgens cycloaddition "click" reaction using azide-functionalized galactose. All copolymers were self-assembled using the nanoprecipitation method to obtain spherical and wormlike micelles as well as polymersomes depending on the block length ratio and the nanoprecipitation conditions. These structures display bioactive galactose units in the polymersome shell, as proven by selective lectin binding experiments.

Protein immobilization onto poly(acrylic acid) functional macroporous polyHIPE obtained by surface-initiated ARGET ATRP.

Amino-functional macroporous monoliths from polymerized high internal phase emulsion (polyHIPE) were surface modified with initiators for atom transfer radical polymerization (ATRP). The ATRP initiator groups on the polyHIPE surface were successfully used to initiate activator regeneration by electron transfer (ARGET) ATRP of (meth)acrylic monomers, such as methyl methacrylate (MMA) or tert-butyl acrylate (tBA) resulting in a dense coating of polymers on the polyHIPE surface. Addition of sacrificial initiator permitted control of the amount of polymer grafted onto the monolith surface. Subsequent removal of the tert-butyl protecting groups yielded highly functional polyHIPE-g-poly(acrylic acid). The versatility to use the high density of carboxylic acid groups for secondary reactions was demonstrated by the successful conjugation of enhanced green fluorescent protein (eGFP) and coral derived red fluorescent protein (DsRed) using EDC/sulfo-NHS chemistry, on the polymer 3D-scaffold surface. The materials and methodologies presented here are simple and robust, thus, opening new possibilities for the bioconjugation of highly porous polyHIPE for bioseparation applications.

Block copolypeptides prepared by N-carboxyanhydride ring-opening polymerization.

N-Carboxyanhydride ring-opening polymerization (NCA ROP) is a synthetically straightforward methodology to generate homopolypeptides. Extensive control over the polymerization permits the production of highly monodisperse synthetic polypeptides to a targeted molecular weight in the absence of unfavorable side reactions. Sequential NCA ROP permits the creation of block copolypeptides composed of individual polypeptide blocks boasting different functionalities, secondary structures, and desirable chemical properties. Consequently, a plethora of novel materials have been generated that have found wide-range applicability. This review offers an insight into contemporary synthetic approaches toward NCA ROP before highlighting a number of block copolypeptide architectures generated.

The generation of hydrophilic polypeptide-siloxane conjugates via n-carboxyanhydride polymerisation.

A novel methodology to create covalently linked polypeptide-siloxane hybrid materials by controlled n-carboxyanhydride ring opening polymerisation is disclosed. Poly-L-glutamic acid and poly-L-lysine conjugated products were formed that possessed excellent surface wettability. In addition, the poly-L-lysine-siloxane hybrids formed demonstrated bactericidal attributes against gram-positive Staphylococcus aureus and gram-negative Escherichia coli. It is anticipated that these materials may be of significance for the generation of hydrophilic siloxane-containing polymers that are commonly employed in contemporary medical devices.

Systematic Study of Enzymatic Degradation and Plasmid DNA Complexation of Mucus Penetrating Star-Shaped Lysine/Sarcosine Polypept(o)ides with Different Block Arrangements.

8-Arm star polypep(o)ides comprising cationic polylysine and hydrophilic polysarcosine blocks with a degree of polymerization (DP) of 30 per block are synthesized. Two different block sequences with polylysine as the inner and polysarcosine as the outer block and vice versa are obtained in addition to a statistical copolymer. Analysis of the enzymatic hydrolysis by the proteolytic enzyme trypsin demonstrates a strong dependence on structural arrangements. While polypept(o)ide disintegration is detectible after 24 h by Size Exclusion Chromatography (SEC), significant hydrolysis of the lysine blocks is only monitored after 48 h by fluorescamine labeling of the produced lysine and clearly accelerated in structures with more accessible polylysine blocks. All structures are capable of complexing plasmid DNA and form gene nanomedicines at sizes around or below 200 nm as determined by Dynamic Light Scattering (DLS), Nanoparticle Tracking Analysis (NTA), and Transition Electron Microscopy (TEM). The polyplex formation is slightly enhanced for both block structures over the random copolypept(o)ide. Moreover, it is demonstrated that the polyplexes can transport through mucus. The results highlight the importance of structural control in compartmentalized polymeric gene vector candidates with hydrophilic domains for potential mucosal delivery.

Versatility of unsaturated polyesters from electrospun macrolactones: RGD immobilization to increase cell attachment.

Poly(globalide) (PGl), an aliphatic polyester derived from unsaturated macrocylic lactone, can be cross-linked during electrospinning and drug-loaded for regenerative medicine applications. However, it lacks intrinsic recognition sites for cell adhesion and proliferation. In order to improve their cell adhesiveness, and therefore their therapeutic potential, we aimed to functionalize electrospun PGl fibers with RGD sequence generating a biomimetic scaffold. First, an amine compound was attached to the surface double bonds of the PGl fibers. Subsequently, the amino groups were coupled with RGD sequences. X-ray photoelectron spectroscopy (XPS) analysis confirmed the functionalization. The obtained fibers were more hydrophilic, as observed by contact angle analysis, and presented smaller Young's modulus, although similar tensile strength compared with non-functionalized cross-linked fibers. In addition, the functionalization process did not significantly alter fibers morphology, as observed by scanning electron microscopy (SEM). Finally, in vitro analysis evidenced the increase in human mesenchymal stromal cells (hMSC) adhesion (9.88 times higher DNA content after 1 day of culture) and proliferation (3.57 times higher DNA content after 8 days of culture) compared with non-functionalized non-cross-linked fibers. This is the first report demonstrating the functionalization of PGl fibers with RGD sequence, improving PGl therapeutic potential and further corroborating the use of this highly versatile material toward regenerative medicine applications.

Selective enzymatic degradation of self-assembled particles from amphiphilic block copolymers obtained by the combination of N-carboxyanhydride and nitroxide-mediated polymerization.

Combining controlled radical polymerizations and a controlled polypeptide synthetic technique, such as N-carboxyanhydride (NCA) ring-opening polymerization, enables the generation of well-defined block copolymers to be easily accessible. Here we combine NCA polymerization with the nitroxide-mediated radical polymerization of poly(n-butyl acrylate) (PBA) and polystyrene (PS), using a TIPNO and SG1-based bifunctional initiator to create a hybrid block copolymer. The polypeptide block consists of (block) copolymers of poly(L-glutamic acid) embedded with various quantities of L-alanine. The formed superstructures (vesicles and micelles) of the block copolymers possessed varying degrees of enzyme responsiveness when exposed to elastase and thermolysin, resulting in controlled enzymatic degradation dictated by the polypeptide composition. The PBA containing block copolymers possessing 50% L-alanine in the polypeptide block showed a high degradation response compared to polymers containing lower L-alanine quantities. The particles stabilized by copolypeptides with L-alanine near the hydrophobic block showed full degradation within 4 days. Particles containing polystyrene blocks revealed no appreciable degradation under the same conditions, highlighting the specificity of the system and the importance of synthetic polymer selection. However, when the degradation temperature was increased to 70 °C, degradation could be achieved due to the higher block copolymer exchange between the particle and the solution. A number of novel biohybrid structures are disclosed that show promise as enzyme-responsive materials with potential use as payload release vehicles, following their controlled degradation by specific, target, enzymes.

Copolymers from unsaturated macrolactones: toward the design of cross-linked biodegradable polyesters.

The enzymatic synthesis of a series of random copolyesters by ring-opening polymerization of unsaturated macrolactones like globalide and ambrettolide with 1,5-dioxepan-2-one (DXO) and 4-methyl caprolactone (4MeCL) was investigated. (13)C NMR diad analysis confirmed the randomness of all copolymers irrespective of the comonomer ratios. Thermal investigation showed that incorporating the comonomers lowered the melting points of the polymers as compared with the macrolactone homopolymers. The decrease was dependent on the comonomer ratio. The unsaturated copolymers were thermally cross-linked using dicumyl peroxide, which resulted in completely amorphous insoluble networks. It was found that 10% incorporation of the unsaturated macolactone was sufficient to obtain a gel content of 95 wt %. Preliminary degradation tests confirm that the cross-linked copolymers are enzymatically degradable and that the incorporation of hydrophilic comonomers like DXO enhances degradation.

Exploiting a Neutral BODIPY Copolymer as an Effective Agent for Photodynamic Antimicrobial Inactivation.

We report the synthesis and photophysical properties of a neutral BODIPY photosensitizing copolymer (poly-8-(4-hydroxymethylphenyl)-4,4-difluoro-2,6-diethynyl-4-bora-3a,4a-diaza-s-indacene) containing ethynylbenzene links between the BODIPY units. The copolymer absorbs further towards the red in the UV-vis spectrum compared to the BODIPY precursor. Photolysis of the polymer produces a singlet excited state which crosses to the triplet surface in less than 300 ps. This triplet state was used to form singlet oxygen with a quantum yield of 0.34. The steps leading to population of the triplet state were studied using time-resolved spectroscopic techniques spanning the pico- to nanosecond timescales. The ability of the BODIPY polymer to generate a biocidal species for bactericidal activity in both solution- and coating-based studies was assessed. When the BODIPY copolymer was dropcast onto a surface, 4 log and 6 log reductions in colony forming units/ml representative of Gram-positive and Gram-negative bacteria, respectively, under illumination at 525 nm were observed. The potent broad-spectrum antimicrobial activity of a neutral metal-free copolymer when exposed to visible light conditions may have potential clinical applications in infection management.

Antimicrobial and degradable triazolinedione (TAD) crosslinked polypeptide hydrogels.

Hydrogels are perfectly suited to support cell and tissue growth in advanced tissue engineering applications as well as classical wound treatment scenarios. Ideal hydrogel materials for these applications should be easy to produce, biocompatible, resorbable and antimicrobial. Here we report the fabrication of degradable covalent antimicrobial lysine and tryptophan containing copolypeptide hydrogels, whereby the hydrogel properties can be independently modulated by the copolypeptide monomer ratio and chiral composition. Well-defined statistical copolypeptides comprising different overall molecular weights as well as ratios of l- and d-lysine and tryptophan at ratios of 35 : 15, 70 : 30 and 80 : 20 were obtained by N-carboxyanhydride (NCA) polymerisation and subsequently crosslinked by the selective reaction of bifunctional triazolinedione (TAD) with tryptophan. Real-time rheology was used to monitor the crosslinking reaction recording the fastest increase and overall modulus for copolypeptides with the higher tryptophan ratio. Water uptake of cylindrical hydrogel samples was dependent on crosslinking ratio but found independent of chiral composition, while enzymatic degradation proceeded significantly faster for samples containing more l-amino acids. Antimicrobial activity on a range of hydrogels containing different polypeptide chain lengths, lysine/tryptophan composition and l/d enantiomers was tested against reference laboratory strains of Gram-negative Escherichia coli (E. coli; ATCC25922) and Gram-positive, Staphylococcus aureus (S. aureus; ATCC25923). log reductions of 2.8-3.4 were recorded for the most potent hydrogels. In vitro leachable cytotoxicity tests confirmed non-cytotoxicity as per ISO guidelines.