Novel approach using activated cellulose film for efficient immobilization of purified diamine oxidase to enhance enzyme performance and stability.

The presence of various contaminants in foodstuffs has led to serious public health concerns. Diamine oxidase (DAO) has attracted tremendous attention for guarding food safety as well as clinical and environmental industries. In this study, DAO from Pisum sativum (Pea) seedlings was extracted and purified by dialysis and gel filtration. Purified DAO was covalently immobilized onto the surface of nitrocellulose membrane using glutaraldehyde. The obtained bioaffinity support has efficiently shown high yield immobilization of DAO from pea seedlings. The optimal conditions of free and immobilized DAO activity were evaluated against the substrate, Putrescine dihydrochloride. The influence of pH, temperature, storage stability, and reusability of immobilized enzyme with comparison to the free enzyme was studied and the results showed that the stabilities were significantly enhanced compared with free counterpart. Residual activity of the immobilized enzyme was 59% of the initial activity after being recycled 10 times. We approve that this novel low cost immobilized DAO carrier presents a new approach in large scale applications.

A novel amperometric bienzymatic biosensor based on alcohol oxidase coupled PVC reaction cell and nanomaterials modified working electrode for rapid quantification of alcohol.

A new amperometric sensor has been fabricated for sensitive and rapid quantification of ethanol. The biosensor assembly was prepared by covalently immobilizing alcohol oxidase (AOX) from Pichia pastoris onto chemically modified surface of polyvinylchloride (PVC) beaker with glutaraldehyde as a coupling agent followed by immobilization of horseradish peroxidase (HRP), silver nanoparticles (AgNPs), chitosan (CHIT), carboxylated multi-walled carbon nanotubes (c-MWCNTs) and nafion (Nf) nanocomposite onto the surface of Au electrode (working electrode). Owing to properties such as chemical inertness, light weight, weather resistance, corrosion resistance, toughness and cost-effectiveness, PVC membrane has attracted a growing interest as a support for enzyme immobilization in the development of biosensors. The amperometric biosensor displayed optimum response within 8 s at pH 7.5 and 35°C temperature. A linear response to alcohol in the range of 0.01mM-50 mM and 0.0001 µM as a minimum limit of detection was displayed by the proposed biosensor with excellent storage stability (190 days) at 4°C. The sensitivity of the sensor was found to be 155 µA mM-1 cm-2. A good correlation (R2 = 0.99) was found between alcohol level in commercial samples as evaluated by standard ethanol assay kit and the current biosensor which validates its performance.

A novel amperometric biosensor for rapid detection of ethanol utilizing gold nanoparticles and enzyme coupled PVC reaction cell.

This research was aimed at the fabrication of an improved enzyme-based amperometric biosensor for rapid quantification of ethanol. Alcohol oxidase (AOX) from Pichia pastoris was covalently immobilized on chemically treated polyvinylchloride (PVC) beaker and subsequently horseradish peroxidase (HRP), nafion (Nf), carboxylated multi-walled carbon nanotubes (c-MWCNTs), chitosan (CHIT) and gold nanoparticles (AuNPs) were immobilized onto Au electrode to fabricate a working electrode. The enzyme-coated PVC surface was analysed morphologically via scanning electron microscopy (SEM). At different stages of construction, the electrochemical properties of working electrode were deciphered by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The biosensor displayed optimal response in a short time span of 12 s at pH 7.5 and 35°C temperature. The working range exhibited by the proposed biosensor was 0.01-42 mM with a limit of detection (LOD) of 0.0001 µM and storage stability of 180 days at 4°C. When level of alcohol was evaluated in commercial samples via standard assay kit and existing biosensor, a good correlation (R2 = 0.98) was observed which authenticates its reliability.

Reusable Enzymatic Strip for Detection of Arsenic

HIGHLIGHTS Arsenic is considered as one of the highly hazardous elements in the environment and a serious carcinogen for the human health. An enzymatic method has been described by using arsenite oxidase for arsenic detection. Residual activity of the immobilized enzyme was 43% of the initial activity after being recycled 10 times.

Abstract Arsenic is considered as one of the highly hazardous elements in the environment and a serious carcinogen for the human health. More attention has taken towards the arsenic due to its presence in ground water in India, China, Bangladesh, Inner Mongolia and several other regions of the world. It's been a challenge to remove arsenic due to the lack of its efficient detection approach in the complicated environmental matrix. The proposed method describes an enzymatic method for arsenic determination using arsenite oxidase, which catalyzes the oxidation of arsenite to arsenate. Hence, a colorimetric PVC strip with immobilized arsenite oxidase has been developed to detect the arsenic concentration and also having potential for the field-testing. The influence of the optimal conditions i.e. pH, temperature, storage stability, and reusability of free and immobilized enzyme were evaluated and compared. The results have shown that the stabilities were significantly enhanced compared with free counterpart. Residual activity of the immobilized enzyme was 43% of the initial activity after being recycled 10 times. We approve that this novel low cost immobilized carrier presents a new approach in large scale applications and expected to act as a model for establishment of indigenous arsenic sensor in miniature form.