Periodontal status is associated with oral function in community-dwelling older adults, independent of dentition status.

OBJECTIVE: To determine whether periodontal status is associated with oral function, including masticatory performance and occlusal force, among community-dwelling older adults. BACKGROUND: Although a potential association between periodontal status and oral function has been reported, variations in the root surface area (RSA) of each tooth have not been considered. METHODS: We used data from a population-based study involving community-dwelling older adults. The RSA with periodontal ligament (RSA-PL), which quantifies the RSA attached to the periodontal ligament and alveolar bone, was calculated based on full-mouth periodontal examination. Masticatory performance was assessed using spectrophotometric measurement of the color (a* value) of color-changing chewing gum. The bilateral maximal occlusal force (MOF) was measured using a pressure-sensitive sheet and dedicated software. The associations of the RSA-PL, a quantitative marker of periodontal tissue support, with the a* value and MOF were assessed using linear regression models. RESULTS: The analyses included data from 250 adults [60.8% women; age, mean (standard deviation) 82.5 (5.0) years]. On average, the study participants had an RSA-PL of 26.3 cm2 , a* value of 25.0, and an MOF value of 555.1 N. After adjustments for potential confounders, including dentition status, age, sex, dental visit regularity, smoking status, physical activity level, depressive symptoms, a history of stroke or diabetes mellitus, and body mass index, the RSA-PL was found to be associated with the a* value [coefficient (per 1 cm2 increase): 0.16, 95% confidence interval (CI) 0.10-0.22)] and MOF (coefficient: 9.2, 95% CI 5.3-13.1). CONCLUSION: This study demonstrated that greater amounts of remaining tooth-supporting structures, indicated by higher RSA-PL values, were associated with better masticatory performance and a higher occlusal force among community-dwelling older adults.

Xerostomia aggravates ligation-induced peri-implantitis: A preclinical in vivo study.

OBJECTIVES: Previous studies have indicated that xerostomia is a critical factor affecting periodontitis; nonetheless, it is controversial whether xerostomia impairs peri-implant tissue. The objective of this experimental study was to evaluate the effect of xerostomia on the peri-implant hard and soft tissues in the rat model. MATERIALS AND METHODS: Implants were placed in bilateral maxillae of male Wistar rats. The animals underwent submandibular and sublingual gland resection on both sides (DRY group) or sham operation (CTR group). Silk ligatures were placed around one side of abutments, which were randomly selected in each animal. The effects of xerostomia were assessed using micro-CT, histological analysis, real-time PCR, and 16S rRNA-based metagenomic analysis. RESULTS: Ligation with silk thread caused bone resorption around implants. Although xerostomia itself did not induce bone resorption, it significantly enhanced silk ligature-mediated bone resorption around implants. Histological analysis and real-time PCR indicated that xerostomia induced inflammation and osteoclastogenesis around implants with silk ligatures. Furthermore, it altered the microbiota of the plaque on the silk thread around implants. CONCLUSION: Xerostomia accelerates mucosal inflammation and osteoclastogenesis, which aggravates bone resorption around implants.

The relationship between masticatory performance and intakes of foods and nutrients in Japanese male workers: A cross-sectional study.

BACKGROUND: Although many studies have been conducted on the relationship between masticatory performance and nutrient ingestion in the elderly, few large-scale studies have been carried out using relatively young individuals. OBJECTIVES: The objective of this study was to clarify the association between the masticatory performance evaluated by the gummy-jelly test, not by visual examination, and nutrient ingestion state based on the brief self-administered diet history questionnaire (BDHQ). METHODS: This was a cross-sectional survey of 540 male workers. Somatometry, blood pressure measurement, blood test and medical interview were performed as a periodic health check-up. In the dental check-up, an oral examination, gummy-jelly test (glucosensor) and survey of ingested food and nutrients using BDHQ were performed. The participants were classified into two groups with low and normal values of masticatory performance. Participants with a score on the gummy-jelly test below 150 mg/dL or 150 mg/dL or higher were included in the low and normal groups, respectively. RESULTS: Two hundred and forty-eight participants (45.8%) had low masticatory performance, and 292 (53.2%) had normal masticatory performance. The intakes of some minerals and vitamins, such as calcium, vitamin D, vitamin B2 , small fish with bones and non-oily fish, were significantly lower in the low masticatory group than in the normal group. In contrast, the intake of sugar for coffee and tea and that of chicken were significantly higher in the low masticatory group than in the normal group. CONCLUSION: This study suggested that low masticatory performance can affect nutrient intake, which may cause non-communicable diseases.

Is Anterior Guidance a Key Factor on Planning Implant Treatment for Free-End Missing in the Posterior Mandible?

To perform safe implant treatment, the anatomical structure and bone quality at implant placement sites are evaluated based on a patient's computerized tomography (CT) data, but there is no definite method to determine placement sites and the appropriate number of implants. The objective of this study was to investigate the influence of the number and arrangement of implants on the stress distribution in 3-unit posterior fixed partial dentures for the posterior mandible by mechanical analysis using the finite element method. Three-dimensional finite element analysis models were constructed from the CT data of a patient with missing mandibular teeth (Nos. 35, 36, 37). Implant placement was simulated under various conditions. Superstructures were connected and fixed with a titanium frame. As the loading conditions, 400 N vertical and lateral loads (45° on the lingual side and 45° on the buccal side) were applied to the upper areas of Nos. 35, 36, and 37, and the stress distribution and frame displacement were evaluated. When a vertical force was applied, no difference of the von Mises stress was noted among the 5 experimental conditions. When lateral force was applied from the lingual and buccal sides at 45°, the stress was higher than that induced by vertical force under all conditions, and it was especially high under mesial and distal cantilever conditions. When displacement of the titanium frame was measured, the displacement caused by lateral force was greater than that due to vertical force. In addition, comparison between long and short distal cantilever bridges revealed that displacement of the titanium frame tended to be smaller when the short cantilever was used. These findings suggested that the stress on peri-implant tissues and displacement of the titanium frame vary depending on the configuration and number of implants, with greater stress and more marked displacement of the titanium frame being induced by lateral force when the number of implants is reduced and a cantilever bridge is selected.

Prostanoid-dependent spontaneous pain and PAR2-dependent mechanical allodynia following oral mucosal trauma: involvement of TRPV1, TRPA1 and TRPV4.

Abstract: During dental treatments, intraoral appliances frequently induce traumatic ulcers in the oral mucosa. Such mucosal injury-induced mucositis leads to severe pain, resulting in poor quality of life and decreased cooperation in the therapy. To elucidate mucosal pain mechanisms, we developed a new rat model of intraoral wire-induced mucositis and investigated pain mechanisms using our proprietary assay system for conscious rats. A thick metal wire was installed in the rats between the inferior incisors for one day. In the mucosa of the mandibular labial fornix region, which was touched with a free end of the wire, traumatic ulcer and submucosal abscess were induced on day 1. The ulcer was quickly cured until next day and abscess formation was gradually disappeared until five days. Spontaneous nociceptive behavior was induced on day 1 only, and mechanical allodynia persisted over day 3. Antibiotic pretreatment did not affect pain induction. Spontaneous nociceptive behavior was sensitive to indomethacin (cyclooxygenase inhibitor), ONO-8711 (prostanoid receptor EP1 antagonist), SB-366791, and HC-030031 (TRPV1 and TRPA1 antagonists, respectively). Prostaglandin E2 and 15-deoxyΔ12,14-prostaglandin J2 were upregulated only on day 1. In contrast, mechanical allodynia was sensitive to FSLLRY-NH2 (protease-activated receptor PAR2 antagonist) and RN-1734 (TRPV4 antagonist). Neutrophil elastase, which is known as a biased agonist for PAR2, was upregulated on days 1 to 2. These results suggest that prostanoids and PAR2 activation elicit TRPV1- and TRPA1-mediated spontaneous pain and TRPV4-mediated mechanical allodynia, respectively, independently of bacterial infection, following oral mucosal trauma. The pathophysiological pain mechanism suggests effective analgesic approaches for dental patients suffering from mucosal trauma-induced pain.

A prospective study of changes in oral health-related quality of life during immediate function implant procedures for edentulous individuals.

OBJECTIVE: The aim of this prospective clinical study was to evaluate longitudinal changes in oral health-related quality of life (OHRQoL) attributable to fixed dental prostheses during All-on-4(®) treatment in one or both jaws. MATERIALS AND METHODS: Ten patients underwent placement of four or six endosteal dental implants on the basis of the All-on-4(®) treatment concept in the edentulous maxilla or both jaws and immediate loading with acrylic interim prostheses. The prostheses were replaced after 3-6 months, and definitive prostheses with titanium framework and reinforced resin facing were fixed after another 5 months or more. The subjects completed the shortened Japanese version of the Oral Health Impact Profile (OHIP-J14) before the surgery (T0), 1 week after the initial (T1) and secondary (T2) interim prostheses were placed, and 3 months after definitive prosthesis placement (T3). Complete data of nine subjects were analyzed with the Wilcoxon signed-rank test. RESULTS: The total OHIP-J14 score significantly reduced only at T3 (P < 0.05). "Functional limitation," "physical pain," "physical disability," and "psychological disability" scores significantly decreased at T3, and "psychological discomfort" scores also significantly dropped at T2. "Social disability" and "handicap" scores remained unchanged throughout. CONCLUSION: Fixed definitive prostheses with metal framework are more effective than fixed all-acrylic prostheses in improving OHRQoL during All-on-4(®) treatment.

Soft tissue biological response to zirconia and metal implant abutments compared with natural tooth: microcirculation monitoring as a novel bioindicator.

INTRODUCTION: Zirconia is often used for implant abutments for esthetics. The aim of this clinical study was to compare the effects of zirconia and metal abutments on periimplant soft tissue. MATERIALS AND METHODS: Ten maxillary anterior implant patients, 5 with metal abutments and 5 with zirconia abutments, were enrolled in this trial. The soft tissue around the implant abutments was evaluated by 2-dimensional laser speckle imaging and thermography. The blood flow in soft tissue around natural teeth was also measured to correct for differences among the subjects. RESULTS: Significantly greater blood flow was detected in the zirconia abutment group (95.64 ± 5.17%) relative to the metal abutment group (82.25 ± 8.92%) in free gingiva (P = 0.0317). Reduced blood flow (by almost 18%) was detected in the tissue surrounding metal abutments compared with the tissue surrounding natural teeth. The surface temperature showed no significant difference for all measurements. CONCLUSIONS: These results suggest that blood flow in tissue surrounding zirconia abutments is similar to that in soft tissue around natural teeth. Moreover, zirconia abutments could be advantageous for the maintenance of immune function by improving blood circulation.

Development of zirconia-based polymer-infiltrated ceramic network for dental restorative material.

Polymer-infiltrated ceramic network (PICN) materials have gained considerable attention as tooth restorative materials owing to their mechanical compatibility with human teeth. However, the mechanical strength of contemporary PICN materials is lower than those of conventional resin composites and ceramics. This study aims to develop novel high-strength PICN for use as a dental restorative material. Zirconia-based PICN (EXP) was fabricated using 3 mol% yttria tetragonal polycrystalline zirconia powder and resin monomers via slip casting, followed by sintering and polymer infiltration. Comprehensive analyses of the microstructure, mechanical properties, and physicochemical properties of EXP were performed using scanning electron microscopy with energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, inorganic content measurements, three-point bending test, Vickers hardness test, two-body wear test, shear bond strength (SBS) test, surface free energy analysis, and water sorption/solubility test. Commercially available computer-aided design/computer-aided manufacturing (CAD/CAM) materials, including resin composite (CERASMART), silicate-based PICN (ENAMIC), and zirconia ceramic (e.max ZirCAD), were used for comparison. The analyses highlight the dual network structure of EXP, which comprised a zirconia skeleton and an infiltrated resin phase. EXP exhibits a flexural strength of 346.0 ± 46.0 MPa, flexural modulus of 44.0 ± 3.7 GPa, and Vickers hardness of 440.1 ± 51.2 VHN. The mechanical properties of EXP are significantly higher than those of CERASMART and ENAMIC but lower than those of ZirCAD. Notably, the EXP hardness closely mimics that of the human enamel. The wear volume, SBS, and water sorption/solubility of EXP are comparable to those of CERASMART and ENAMIC. Therefore, EXP has potential applications as a tooth restorative material.

Mechanical insights into jawbone characteristics under chronic kidney disease: A comprehensive nanoindentation approach.

The mechanical properties of the jawbone play a critical role in determining the successful integration of dental prostheses. Chronic kidney disease (CKD) has been identified to abnormally accelerate bone turnover rates. However, the impact of CKD on the mechanical characteristics of the jawbone has not been extensively studied. This study sought to evaluate the time-dependent viscoelastic behaviors of rat jawbones, particularly in the scenarios both with and without CKD. We hypothesized that CKD might compromise the bone's innate toughening mechanisms, potentially owing to the time-dependent viscoelasticity of the bone matrix proteins. The maxillary and mandibular bones of Wistar rats were subjected to nanoindentation and Raman micro-spectroscopy. Load-hold-displacement curves from the cortical regions were obtained via nanoindentation and were mathematically characterized using a suitable viscoelastic constitutive model. Raman micro-spectroscopy was employed to identify nuanced vibrational changes in local molecular structures induced by CKD. The time course of indenter penetration onto cortical bones during the holding stage (creep behavior) can be mathematically represented by a series arrangement of the Kelvin-Voigt bodies. This configuration dictates the overall viscoelastic response observed during nanoindentation tests. The CKD model exhibited a reduced extent of viscoelastic contributions, especially during the initial ramp loading phase in both the maxillary and mandibular cortical bones. The generalized Kelvin-Voigt model comprises 2 K-Voigt elements that signify an immediate short retardation time (τ1) and a subsequent prolonged retardation time (τ2), respectively. Notably, the mandibular CKD model led to an increase in the delayed τ2 alongside an increase in non-enzymatic collagen cross-linking. These suggest that, over time, CKD diminishes the bone's capability for supplementary energy absorption and dimensional recovery, thus heightening their susceptibility to fractures.

Diagnostic potential of endothelin-1 in peri-implant diseases: a cross-sectional study.

PURPOSE: This study aimed to evaluate the potential of Endothelin-1 (ET-1), a peptide derived from vascular endothelial cells, as a biomarker for diagnosing peri-implant diseases. METHODS: A cohort of 29 patients with a total of 76 implants was included in this study and subsequently divided into three groups based on peri-implant clinical parameters and radiographic examination: healthy (peri-implant health) (n = 29), mucositis (n = 22), and peri-implantitis (n = 25) groups. The levels of ET-1 (ρg/site) and interleukin (IL)-1ß (ρg/site) in peri-implant sulcus fluid (PISF) samples were determined using enzyme immunoassay. Statistical analyses were conducted using Kruskal-Wallis and Steel-Dwass tests. Logistic regression and receiver operating characteristic (ROC) curve analyses were performed to evaluate the diagnostic performance of the biomarkers. RESULTS: ET-1 levels were significantly elevated in the peri-implantitis group compared to those in the healthy group, and were highest in the peri-implant mucositis group. Additionally, IL-1ß levels were significantly higher in the peri-implantitis group than those in the healthy group. ROC curve analysis indicated that ET-1 exhibited superior area under the curve values, sensitivity, and specificity compared to those of IL-1ß. CONCLUSIONS: Our findings suggest that the presence of ET-1 in PISF plays a role in peri-implant diseases. Its significantly increased expression in peri-implant mucositis indicates its potential for enabling earlier and more accurate assessments of peri-implant inflammation when combined with conventional examination methods.

Application of anti-vascular endothelial growth factor antibody restores the function of saliva secretion in a type 2 diabetes mouse model.

OBJECTIVES: Xerostomia, a common complication of type 2 diabetes, leads to an increased risk of caries, dysphagia, and dysgeusia. Although anti-vascular endothelial growth factor (VEGF) antibodies, such as ranibizumab (RBZ), have been used to treat diabetic retinopathy, their effects on the salivary glands are unknown. This study evaluated the effects of RBZ on salivary glands to reduce inflammation and restore salivary function in a mouse model of type 2 diabetes. METHODS: Male KK-Ay mice with type 2 diabetes (10-12 weeks old) were used. The diabetes mellitus (DM) group received phosphate-buffered saline, while the DM + RBZ group received an intraperitoneal administration of RBZ (100 µg/kg) 24 h before the experiment. RESULTS: Ex vivo perfusion experiments showed a substantial increase in salivary secretion from the submandibular gland (SMG) in the DM + RBZ group. In addition, the mRNA expression levels of TNF-α and IL-1ß were considerably lower in this group. In contrast, those of aquaporin 5 were substantially higher in the DM + RBZ group, as revealed by quantitative reverse transcription PCR. Furthermore, the number of lymphocyte infiltration spots in the SMG was notably lower in the DM + RBZ group. Finally, intracellular Ca2+ signaling in acinar cells was considerably higher in the DM + RBZ group than that in the DM group. CONCLUSION: Treating a type 2 diabetic mouse model with RBZ restored salivary secretion through its anti-inflammatory effects.

Chronic kidney disease compromises structural and mechanical properties of maxillary cortical bone in a rat model.

PURPOSE: This study aimed to investigate the effects of chronic kidney disease (CKD) on the structural and mechanical properties of the maxillary and mandibular cortical bone. METHODS: The maxillary and mandibular cortical bones from CKD model rats were used in this study. CKD-induced histological, structural, and micro-mechanical alterations were assessed using histological analyses, micro-computed tomography (CT), bone mineral density (BMD) measurements, and nanoindentation tests. RESULTS: Histological analyses indicated that CKD caused an increase in the number of osteoclasts and a decrease in the number of osteocytes in the maxilla. Micro-CT analysis revealed that CKD induced a void volume/cortical volume (%) increase, which was more remarkable in the maxilla than in the mandible. CKD also significantly decreased the BMD in the maxilla. In the nanoindentation stress-strain curve, the elastic-plastic transition point and loss modulus were lower in the CKD group than that in the control group in the maxilla, suggesting that CKD increased micro fragility of the maxillary bone. CONCLUSIONS: CKD affected bone turnover in the maxillary cortical bone. Furthermore, the maxillary histological and structural properties were compromised, and micro-mechanical properties, including the elastic-plastic transition point and loss modulus, were altered by CKD.

Comparison of plaque accumulation and soft-tissue blood flow with the use of full-arch implant-supported fixed prostheses with mucosal surfaces of different materials: a randomized clinical study.

OBJECTIVE: The aims of this clinical study were to determine differences in plaque accumulation and to compare the effects of reinforced composite resin and titanium on peri-implant soft-tissue and residual-ridge inflammation. MATERIAL AND METHODS: A total of 19 subjects were enrolled in this clinical trial; 10 jaws had implant-supported fixed prostheses with composite resin mucosal surfaces, 11 jaws had titanium prostheses fabricated by computer-aided design/computer-aided manufacture (CAD/CAM), and 6 jaws had acrylic resin prostheses. Plaque area indexes (PAIs) were calculated on the mucosal surfaces of prostheses, and blood flow in the mucosa was captured with two-dimensional laser speckle imaging to evaluate residual-ridge inflammation. Subjects were educated about oral hygiene and reevaluated after 3 months. RESULTS: The PAI was significantly lower on titanium mucosal surfaces than on reinforced composite resin surfaces at the initial and second measurements (initial, P = 0.0052; second, P = 0.0044). Self-curing acrylic resin surfaces did not show any significant difference when compared with reinforced resin or titanium. Blood flow was significantly lower in mucosa contacting titanium surfaces than in mucosa contacting reinforced composite resin surfaces at the initial measurement (P = 0.0330). Although subjects were instructed about plaque control after the initial measurement, PAIs indicated that the difference between the two materials could not be overcome. CONCLUSION: In terms of oral hygiene and mucosal inflammation, titanium was superior to reinforced composite resin in implant-supported fixed prostheses for edentulous subjects, and the short-term use of acrylic resin was superior to the use of reinforced composite resin.

Bond Strength of Sandblasted PEEK with Dental Methyl Methacrylate-Based Cement or Composite-Based Resin Cement.

Poly-ether-ether-ketone (PEEK) is commonly employed in dental prostheses owing to its excellent mechanical properties; however, it is limited by its low bond strength with dental resin cement. This study aimed to clarify the type of resin cement most suitable for bonding to PEEK: methyl methacrylate (MMA)-based resin cement or composite-based resin cement. For this purpose, two MMA-based resin cements (Super-Bond EX and MULTIBOND II) and five composite-based resin cements (Block HC Cem, RelyX Universal Resin Cement, G-CEM LinkForce, Panavia V5, and Multilink Automix) were used in combination with appropriate adhesive primers. A PEEK block (SHOFU PEEK) was initially cut, polished, and sandblasted with alumina. The sandblasted PEEK was then bonded to resin cement with adhesive primer according to the manufacturer's instructions. The resulting specimens were immersed in water at 37 °C for 24 h, followed by thermocycling. Subsequently, the tensile bond strengths (TBSs) of the specimens were measured; the TBSs of the composite-based resin cements after thermocycling were found to be zero (G-CEM LinkForce, Panavia V5, and Multilink Automix), 0.03 ± 0.04 (RelyX Universal Resin Cement), or 1.6 ± 2.7 (Block HC Cem), whereas those of Super-Bond and MULTIBOND were 11.9 ± 2.6 and 4.8 ± 2.3 MPa, respectively. The results demonstrated that MMA-based resin cements exhibited stronger bonding to PEEK than composite-based resin cements.

Influence of the thickening agent contained in a phosphoric acid etchant on bonding between feldspar porcelain and resin cement with a silane coupling agent.

Phosphoric acid (PA) etchants are widely used for the bonding pretreatment of teeth; however, their influences on the bonding between glass-ceramics and resin cement have not been clarified yet. This study investigated the effect of a thickening agent on the bonding strength between feldspar porcelain treated with a PA etchant and resin cement with a silane coupling agent. The experiments were performed using two PA etchants: commercial one and prepared one consisting a PA aqueous solution and poly(ethylene glycol) thickening agent. The samples were evaluated by shear bond strength testing, scanning electron microscopy, and Fourier-transform infrared spectroscopy. The obtained results revealed that the thickening agent adhered to the porcelain surface and inhibited cement bonding. Meanwhile, PA remained on the surface due to the presence of the thickening agent and activated the silane coupling agent. Overall, the PA etchant did not improve the bond durability.

5- to 15-Year Survival of Immediately Loaded Implants in Fully Edentulous Maxillae: A Multilevel Analysis in a Retrospective Cohort Study.

PURPOSE: Although immediate-loading implant (ILI) treatment is a general treatment strategy for fully edentulous maxillae, long-term evidence is required. The purpose of this study was to evaluate the long-term clinical results of, and risk factors for, ILI treatment in fully edentulous maxillae. MATERIALS AND METHODS: ILI treatments of maxillae using 526 implants in 117 patients were reviewed retrospectively. The longest and mean observation periods were 15 years and 9.2 years, respectively. Kaplan-Meier survival curve analysis, log-rank tests, and multilevel mixed-effects parametric survival analysis were used for statistical analyses. RESULTS: Overall, 38 of 526 implants failed in 23 patients, and the estimated 15-year cumulative implant-level and patient-level survival rates were 90.7% and 73.7%, respectively. The cumulative implant survival rate was significantly higher in female patients than in male patients. Sex, implant length, and implant diameter were significantly associated with implant survival. CONCLUSION: ILI treatment of completely edentulous maxillae demonstrated viable long-term clinical outcomes. Male sex, shorter implant length, and narrow implant diameter negatively affected implant survival. Int J Oral Maxillofac Implants 2023;38:516-522. doi: 10.11607/jomi.10310.

Two-dimensional real-time blood flow and temperature of soft tissue around maxillary anterior implants.

PURPOSE: The aims of this study were to (1) evaluate the basic nature of soft tissue surrounding maxillary anterior implants by simultaneous measurements of blood flow and surface temperature and (2) analyze differences with and without bone grafting associated with implant placement to try to detect the signs of surface morphology change. MATERIALS AND METHODS: Twenty maxillary anterior implant patients, 10 bone grafting and 10 graftless, were involved in this clinical trial. Soft tissue around the implant was evaluated with 2-dimensional laser speckle imaging and a thermograph. RESULTS: Blood flow was significantly lower in attached gingiva surrounding implants in graftless patients (P = 0.0468). On the other hand, it was significantly lower in dental papillae (P = 0.0254), free gingiva (P = 0.0198), and attached gingiva (P = 0.00805) in bone graft patients. Temperature was significantly higher in free gingiva (P = 0.00819) and attached gingiva (P = 0.00593) in graftless patients, whereas it was significantly higher in dental papilla and free gingiva in implants with bone grafting. CONCLUSION: The results suggest that simultaneous measurements of soft-tissue blood flow and temperature is a useful technique to evaluate the microcirculation of soft tissue surrounding implants.

A new mandibular deformation index predicts amount of bone deformation in edentulous patients treated with an implant-supported fixed prosthesis.

PURPOSE: The present study was performed to examine the mandibular deformation during mouth opening in edentulous patients, treated with an implant-supported fixed prosthesis using strain gauges, and identify factors affecting deformation. METHODS: Twenty patients with a fully edentulous mandible who received either 4 or ≥6 implants were included. The distal-most implants were placed mesial to the mental foramen (premolar region) in patients with 4 implants and distal to the mental foramen (molar region) in patients with ≥6 implants. Mandibular deformation during mouth opening was measured using strain gauges in two directions: anteroposterior direction and lateral direction between the distal-most implants on the left and right sides (arch width). The mandibular anatomy was evaluated using computed tomography. RESULTS: Arch width reduction between the left and right implants during mouth opening ranged from 47.38 to 512.80 µm; the range of deformation was 0.12 to 15.14 µm in the anteroposterior direction. Furthermore, a significant positive correlation was noted between arch width reduction in the premolar region and the ratio between the symphyseal bone height and width (P = 0.0003, r = 0.72). CONCLUSION: The reduction in arch width was higher in the molar region than in the premolar region during mouth opening. Moreover, the reduction could be high in the mandibular symphyseal bone because of its greater height and lesser width. The ratio between the symphyseal bone height and width is defined as the mandibular deformation index (MDI) and is used to predict the rate of mandibular bone deformation.

Dental Poly(methyl methacrylate)-Based Resin Containing a Nanoporous Silica Filler.

Poly(methyl methacrylate) (PMMA)-based resins have been conventionally used in dental prostheses owing to their good biocompatibility. However, PMMA-based resins have relatively poor mechanical properties. In the present study, a novel nanoporous silica filler was developed and introduced into PMMA-based resins to improve their mechanical properties. The filler was prepared by sintering a green body composed of silica and an organic binder, followed by grinding to a fine powder and subsequent silanization. The filler was added to photocurable PMMA-based resin, which was prepared from MMA, PMMA, ethylene glycol dimethacrylate, and a photo-initiator. The filler was characterized by scanning electron microscopy (SEM), X-ray diffraction analysis, nitrogen sorption porosimetry, and Fourier transform infrared (FT-IR) spectroscopy. The PMMA-based resins were characterized by SEM and FT-IR, and the mechanical properties (Vickers hardness, flexural modulus, and flexural strength) and physicochemical properties (water sorption and solubility) were evaluated. The results suggested that the filler consisted of microparticles with nanopores. The filler at 23 wt % was well dispersed in the PMMA-based resin matrix. The mechanical and physicochemical properties of the PMMA-based resin improved significantly with the addition of the developed filler. Therefore, such filler-loaded PMMA-based resins are potential candidates for improving the strength and durability of polymer-based crown and denture base.

Functional tooth number in the posterior region associated serum ucOC levels.

PURPOSE: The purpose of this study was to investigate serum undercarboxylated osteocalcin (ucOC) levels in partially edentulous patients scheduled to receive implant treatment and determine the association between ucOC levels, vegetable intake, vitamin K, dietary fiber intake, and functional tooth number in the posterior region (p-FTN). METHODS: A total of 46 patients (20 male and 26 female, 61.9 ± 12.7 years old) were included. The association among serum ucOC levels, vegetable intake, vitamin K and dietary fiber intake was assessed using Spearman's rank correlation coefficient and binary logistic regression analysis. RESULTS: In total, 35% of patients (16/46 subjects) showed an abnormally high ucOC level (≧ 4.5 ng/mL). p-FTN showed a weak positive correlation with vegetable intake, vitamin K and dietary fiber intake (r = 0.28, 0.21, and 0.14, respectively) and a significant negative correlation with ucOC levels (r = - 0.51). Multivariate analysis demonstrated that p-FTN as well as vitamin K intake showed a significant negative association with serum ucOC levels. CONCLUSIONS: More than one-third of patients showed abnormally high ucOC levels. p-FTN showed a negative association with serum ucOC levels, which indicated the possibility that oral status affected bone quality.