Facile Fabrication of Hierarchically Thermoresponsive Binary Polymer Pattern for Controlled Cell Adhesion.

A versatile platform allowing capture and detection of normal and dysfunctional cells on the same patterned surface is important for accessing the cellular mechanism, developing diagnostic assays, and implementing therapy. Here, an original and effective method for fabricating binary polymer brushes pattern is developed for controlled cell adhesion. The binary polymer brushes pattern, composed of poly(N-isopropylacrylamide) (PNIPAAm) and poly[poly(ethylene glycol) methyl ether methacrylate] (POEGMA) chains, is simply obtained via a combination of surface-initiated photopolymerization and surface-activated free radical polymerization. This method is unique in that it does not utilize any protecting groups or procedures of backfilling with immobilized initiator. It is demonstrated that the precise and well-defined binary polymer patterns with high resolution are fabricated using this facile method. PNIPAAm chains capture and release cells by thermoresponsiveness, while POEGMA chains possess high capability to capture dysfunctional cells specifically, inducing a switch of normal red blood cells (RBCs) arrays to hemolytic RBCs arrays on the pattern with temperature. This novel platform composed of binary polymer brush pattern is smart and versatile, which opens up pathways to potential applications as microsensors, biochips, and bioassays.

A Hierarchical-Structured Mineralized Nanofiber Scaffold with Osteoimmunomodulatory and Osteoinductive Functions for Enhanced Alveolar Bone Regeneration.

Alveolar bone resorption is a major cause of teeth loss and jeopardizes the osseointegration of dental implants, greatly affecting patient's quality of life and health. It is still a great challenge to completely regenerate the alveolar bone defect through traditional guided bone regeneration (GBR) membranes due to their limited bioactivity and regeneration potential. Herein, a new hierarchical-structured mineralized nanofiber (HMF) scaffold, which is combined with both anisotropic and isotropic nanofibrous surface topography and the mineralized particles, is fabricated via a simple template-assisted electrospinning technology and in situ mineralization method. This HMF scaffold can not only directly induce osteogenic differentiation of bone mesenchymal stem cells (osteoinduction), but also stimulate macrophage toward pro-healing (M2) phenotype-polarization with an elevated secretion of the pro-healing cytokines, eventually enhancing the osteogenesis (osteoimmunomodulation). The results of in vivo rat alveolar bone defect repair experiments demonstrate that as compared with the combination of commercial Bio-Gide and Bio-Oss, the single HMF scaffold shows comparable or even superior bone repair effect, with better tissue-integration and more suitable degradation time and accompanied by a simplified operation.

A multifunctional liposomal nanoplatform co-delivering hydrophobic and hydrophilic doxorubicin for complete eradication of xenografted tumors.

In the war against cancer, tremendous efforts have been made by using a nanoparticle-based anticancer drug system. However, it is still a great challenge to achieve complete cure and eradication of cancer through chemotherapy. Here, we present a new multifunctional liposomal nanoplatform simultaneously loaded with hydrophilic doxorubicin hydrochloride in the aqueous core and hydrophobic debydrochlorination doxorubicin in the lipid bilayer. Compared with the traditional nanoparticle-based drug delivery system, this nanocarrier has three unique functions including a high payload of the same therapeutic agents with different water-solubilities, highly selective delivery of cargos to tumor cells and long-acting time with tumors. An excellent in vitro antitumor potency can be achieved with an IC50 of 0.91 µg mL-1 for this liposome, which is only half the IC50 of free doxorubicin. More importantly, extremely good antitumor efficacy in vivo is achieved since the mean tumor volume of all xenografted tumors is respectively ∼20% and ∼10% of that of the commercial liposomal doxorubicin formulation and the single doxorubicin liposomes on day 17 after being intravenously injected with the liposome nanoformulation 4 times. Moreover, the tumors were completely cured and eradicated on day 60 with no recurrence and the survival rate still remained at 70% after 365 days. Therefore, this multifunctional binary-drug loaded liposome provides a great potential platform for winning the war against cancer.

Spatiotemporal control of cell-cell reversible interactions using molecular engineering.

Manipulation of cell-cell interactions has potential applications in basic research and cell-based therapy. Herein, using a combination of metabolic glycan labelling and bio-orthogonal click reaction, we engineer cell membranes with ß-cyclodextrin and subsequently manipulate cell behaviours via photo-responsive host-guest recognition. With this methodology, we demonstrate reversible manipulation of cell assembly and disassembly. The method enables light-controllable reversible assembly of cell-cell adhesion, in contrast with previously reported irreversible effects, in which altered structure could not be reused. We also illustrate the utility of the method by designing a cell-based therapy. Peripheral blood mononuclear cells modified with aptamer are effectively redirected towards target cells, resulting in enhanced cell apoptosis. Our approach allows precise control of reversible cell-cell interactions and we expect that it will promote further developments of cell-based therapy.

Binary release of ascorbic acid and lecithin from core-shell nanofibers on blood-contacting surface for reducing long-term hemolysis of erythrocyte.

There is an urgent need to develop blood-contacting biomaterials with long-term anti-hemolytic capability. To obtain such biomaterials, we coaxially electrospin [ascorbic acid (AA) and lecithin]/poly (ethylene oxide) (PEO) core-shell nanofibers onto the surface of styrene-b-(ethylene-co-butylene)-b-styrene elastomer (SEBS) that has been grafted with poly (ethylene glycol) (PEG) chains. Our strategy is based on that the grafted layers of PEG render the surface hydrophilic to reduce the mechanical injure to red blood cells (RBCs) while the AA and lecithin released from nanofibers on blood-contacting surface can actively interact with RBCs to decrease the oxidative damage to RBCs. We demonstrate that (AA and lecithin)/PEO core-shell structured nanofibers have been fabricated on the PEG grafted surface. The binary release of AA and lecithin in the distilled water is in a controlled manner and lasts for almost 5 days; during RBCs preservation, AA acts as an antioxidant and lecithin as a lipid supplier to the membrane of erythrocytes, resulting in low mechanical fragility and hemolysis of RBCs, as well as high deformability of stored RBCs. Our work thus makes a new approach to fabricate blood-contacting biomaterials with the capability of long-term anti-hemolysis.

A novel hydrophilic polymer-brush pattern for site-specific capture of blood cells from whole blood.

A novel hydrophilic PAMPS-PAAm brush pattern is fabricated to selectively capture blood cells from whole blood. PAMPS brushes provide antifouling surfaces to resist protein and cell adhesion while PAAm brushes effectively entrap targeted proteins for site-specific and cell-type dependent capture of blood cells.

Micropatterning of hydrophilic polyacrylamide brushes to resist cell adhesion but promote protein retention.

Contrary to a prevailing concept on protein adsorption and cell adhesion, novel micropatterned polyacrylamide (PAAm) brushes that can resist cell adhesion but promote protein retention are created through patterning of ATRP initiators and surface-initiated ATRP on a polymer substrate.

Controlled lecithin release from a hierarchical architecture on blood-contacting surface to reduce hemolysis of stored red blood cells.

Hemolysis of red blood cells (RBCs) caused by implant devices in vivo and nonpolyvinyl chloride containers for RBC preservation in vitro has recently gained much attention. To develop blood-contacting biomaterials with long-term antihemolysis capability, we present a facile method to construct a hydrophilic, 3D hierarchical architecture on the surface of styrene-b-(ethylene-co-butylene)-b-styrene elastomer (SEBS) with poly(ethylene oxide) (PEO)/lecithin nano/microfibers. The strategy is based on electrospinning of PEO/lecithin fibers onto the surface of poly [poly(ethylene glycol) methyl ether methacrylate] [P(PEGMEMA)]-modified SEBS, which renders SEBS suitable for RBC storage in vitro. We demonstrate that the constructed 3D architecture is composed of hydrophilic micro- and nanofibers, which transforms to hydrogel networks immediately in blood; the controlled release of lecithin is achieved by gradual dissolution of PEO/lecithin hydrogels, and the interaction of lecithin with RBCs maintains the membrane flexibility and normal RBC shape. Thus, the blood-contacting surface reduces both mechanical and oxidative damage to RBC membranes, resulting in low hemolysis of preserved RBCs. This work not only paves new way to fabricate high hemocompatible biomaterials for RBC storage in vitro, but provides basic principles to design and develop antihemolysis biomaterials for implantation in vivo.

Construction of 3D micropatterned surfaces with wormlike and superhydrophilic PEG brushes to detect dysfunctional cells.

Detection of dysfunctional and apoptotic cells plays an important role in clinical diagnosis and therapy. To develop a portable and user-friendly platform for dysfunctional and aging cell detection, we present a facile method to construct 3D patterns on the surface of styrene-b-(ethylene-co-butylene)-b-styrene elastomer (SEBS) with poly(ethylene glycol) brushes. Normal red blood cells (RBCs) and lysed RBCs (dysfunctional cells) are used as model cells. The strategy is based on the fact that poly(ethylene glycol) brushes tend to interact with phosphatidylserine, which is in the inner leaflet of normal cell membranes but becomes exposed in abnormal or apoptotic cell membranes. We demonstrate that varied patterned surfaces can be obtained by selectively patterning atom transfer radical polymerization (ATRP) initiators on the SEBS surface via an aqueous-based method and growing PEG brushes through surface-initiated atom transfer radical polymerization. The relatively high initiator density and polymerization temperature facilitate formation of PEG brushes in high density, which gives brushes worm-like morphology and superhydrophilic property; the tendency of dysfunctional cells adhered on the patterned surfaces is completely different from well-defined arrays of normal cells on the patterned surfaces, providing a facile method to detect dysfunctional cells effectively. The PEG-patterned surfaces are also applicable to detect apoptotic HeLa cells. The simplicity and easy handling of the described technique shows the potential application in microdiagnostic devices.

Aqueous-based immobilization of initiator and surface-initiated ATRP to construct hemocompatible surface of poly (styrene-b-(ethylene-co-butylene)-b-styrene) elastomer.

Surface-initiated atom transfer radical polymerization (SI-ATRP) is a versatile tool for surface functionalization in a well-controlled manner. However, surface modification of styrenic thermoplastic elastomers (STPEs) faces a great challenge because immobilization of typical ATRP initiators onto STPEs needs to be carried out in organic solvent, which dissolves and destroys the STPEs film. In this work, a simple aqueous-based route is developed to immobilize ATRP initiators, Br, onto the surface of styrene-b-(ethylene-co-butylene)-b-styrene elastomer (SEBS), chosen as a model copolymer of STPEs. In such a way, functional polymer brushes of ethylene glycol methyl ether methacrylate (OEGMA) are successfully prepared from the surface of SEBS. Kinetic investigations show an approximately linear relationship between grafting density and reaction time, indicating the growth of chains is coincident with a "controlled" process. CBr bonds directly connected to benzene rings on the SEBS-Br surfaces are demonstrated to be effective initiation sites for SI-ATRP. The even coverage of the surface by well-defined P(OEGMA) brushes enable SEBS films to exhibit excellent resistance to protein adsorption and platelet adhesion as well as low hemolysis ratio. This work not only manipulates the SEBS surface to substantially improve its biocompatibility, but paves a way to facilitate SI-ATRP on the surface of styrene-based block copolymers (SBCs).

Effect of morselized bones on binding of the canine hydroxyapatite-coated femoral stem.

BACKGROUND: Non-cement femoral stems are recognized in clinical use, but there are still some problems. The aim of this research was to make non-cement femoral stems to be press-fit with the medullary cavity. METHODS: Twenty-four healthy adult mongrel dogs were randomly divided into experimental and control groups. In the right hip joint, an artificial femoral bone replacement surgery was conducted. For the experimental group, the replacement surgery of hydroxyapatite (HA)-coated femoral stems was done, while autogeneous morselized bone was implanted into the medullary cavity. For the control group, morselized bone was not implanted. At postoperative 1, 3, 6 months, a test for interfacial shear characteristics was conducted in the MTS810 Tester. The comparison between the two groups' bone-prostheses in shear strength for their interface from shearing destruction was made. A histological observation to check prosthesis-bone interface contact ratios and bone growth was carried out. RESULTS: For the experimental group, shear strength was 0.317 MPa in 1 month, 1.447 MPa in 3 months, and 1.621 MPa in 6 months. For the control group, shear strength was 0.195 MPa in 1 month, 1.023 MPa in 3 months, and 1.483 MPa in 6 months. The difference was statistically significant. Stereomicroscope-based observation showed that the number of trabecular bones in the experimental group was larger than that of the control group, and bone growth of the former group was better than that of the latter group. Inverted microscopic observation showed that the binding degree between the prosthesis and trabecular bone of the experimental group was higher than that of the control group. Comparatively, the experimental group's trabecular bone had more stromal cells. CONCLUSIONS: The morselized bones can effectively improve the biological bonding strength and bone-contact ratios in the short term for the HA-coated femoral stem and accelerate the bonding process. The use of morselized autogenous bones played a good role in bone in-growth of the femoral bone stem surface.