Skeletal and upper airway stability following modified maxillomandibular advancement for treatment of obstructive sleep apnea in skeletal class I or II deformity.

OBJECTIVES: Maxillomandibular advancement (MMA) is an effective short-term treatment for obstructive sleep apnea (OSA). This study aimed to evaluate the long-term stability of the facial skeleton, upper airway, and its surrounding structures, as well as improvement in OSA following MMA. MATERIALS AND METHODS: Thirty-one adults with moderate-to-severe OSA underwent surgery-first modified MMA as primary surgery. Polysomnography and cone-beam computed tomography were obtained pre-surgery, early post-surgery, and at follow-up (i.e., ≥ 2 years post-surgery). Image analysis software assessed the facial skeleton, upper airway, and its surrounding structures. RESULTS: Early post-surgery, apnea-hypopnea index (AHI) had decreased significantly (p < 0.001) and the minimum oxygen saturation (MSAT) increased (p = 0.001), indicating significant improvement in OSA. At follow-up, the AHI and MSAT remained stable. However, the anterior maxilla, soft palate, and tongue moved backward while the hyoid moved downward. There was also a significant decrease in the minimal cross-sectional area of the oropharynx. The reduction in AHI was significantly related to the anterior movement of the anterior maxilla and tongue, inferior movement of the posterior maxilla, and superior movement of the soft palate tip. CONCLUSIONS: The improvement of OSA after modified MMA remained stable for at least 2 years following treatment, despite the relapse of the facial skeleton, upper airway, and its surrounding structures. The reduction of AHI was not related to changes in the caliber of the upper airway but to the movement of the maxilla, soft palate, and tongue. Clinical relevance Modified MMA is clinically effective for long-term treatment of patients with moderate-to-severe OSA.

One-splint versus two-splint technique in orthognathic surgery for class III asymmetry: comparison of patient-centred outcomes.

OBJECTIVES: Two-jaw orthognathic surgery (OGS) is done using either the one-splint technique with free-hand positioning of the maxillomandibular complex or the two-splint technique with intermediate splints to position the maxilla. It is uncertain which technique achieves better outcomes. This study compares frontal soft tissue symmetry and subjective patient QoL between one-splint and two-splint techniques in skeletal Class III asymmetry patients undergoing OGS with three-dimensional surgical planning. MATERIALS AND METHODS: This retrospective case-control study comprised 34 one-splint and 46 two-splint OGS patients. Frontal photographs and Orthognathic Quality of Life Questionnaire (OQLQ) were done pre- and post-treatment. Frontal soft tissue symmetry was analysed with the anthropometric Facial Symmetry Index. Measurements were compared with t-tests and chi-squared tests with p-value set at 0.05. RESULTS: The groups differed in pre-treatment ANB and OQLQ scores. The two-splint group showed significant improvement in all symmetry measures. The one-splint group showed significant improvement in all symmetry measures except midface deviation, upper contour deviation and the Facial Contour Symmetry Index. Both groups showed significant improvement in OQLQ scores. There were no significant differences in post-treatment symmetry measurements and OQLQ scores between groups. CONCLUSIONS: Although two-splint technique may better improve contour symmetry, there were no significant differences in frontal soft tissue symmetry and QoL after OGS in skeletal Class III asymmetry with either one-splint or two-splint technique, with both techniques resulting in significant improvement. CLINICAL RELEVANCE: One-splint and two-splint surgical techniques produce similar patient-centred outcomes in Class III asymmetry patients.

Three-dimensional assessment of facial morphology in children and adolescents with juvenile idiopathic arthritis and moderate to severe TMJ involvement using 3D surface scans.

OBJECTIVE: This study aims to (1) assess the facial morphology in juvenile idiopathic arthritis (JIA) subjects with moderate to severe temporomandibular joint (TMJ) involvement using 3D surface scans and (2) compare the facial morphology in these subjects to that in JIA subjects without TMJ involvement. METHODS: Sixty JIA subjects were included and grouped as follows: group 1 (no involvement group), JIA without TMJ involvement; Group 2 (unilateral group), JIA with moderate to severe unilateral TMJ involvement; and group 3 (bilateral group), JIA with bilateral TMJ involvement. Standard orientation of all surfaces was accomplished. The means and variabilities of facial morphology in groups 2 and 3 were assessed and compared with those of group 1 in three dimensions, respectively. RESULTS: Group 2 (unilateral group) exhibited a more retruded and wider chin, shorter mandibular height, and more prominent cheek (2, 2, 5, and 2 mm, on average, respectively) on the affected side and a more retruded and narrower chin and more prominent malar region (4, 3, and 2 mm, on average, respectively) on the unaffected side compared with group 1 (no involvement group) (p < 0.05). Group 3 (bilateral group) exhibited a more retruded chin, shorter mandibular height, more prominent upper cheeks, and narrower perioral region (5, 5, 3, and 2 mm, respectively) compared with group 1 (no involvement group) (p < 0.05). CONCLUSIONS: In JIA subjects with moderate to severe unilateral or bilateral TMJ involvement, the affected side(s) revealed similar facial dysmorphology with reduced mandibular height, chin retrusion, and prominent upper cheek. CLINICAL RELEVANCE: Three-dimensional surface scans can be a non-ionizing indicator of signs of TMJ involvement in JIA subjects.

Skeletal Stability After Mandibular Counterclockwise Rotational Advancement for Correction of Skeletal Class II Deformity-A Systematic Review and Meta-analysis.

OBJECTIVES: The aim of this systemic review was to compare surgical and postsurgical changes in the mandible after bilateral sagittal split osteotomy (BSSO) with counterclockwise (CCW) rotational advancement. A review of the current available dental literature regarding skeletal stability after mandibular CCW rotational advancement for skeletal Class II deformity was performed using a qualitative and quantitative analysis (meta-analysis). MATERIAL AND METHODS: Five databases were searched: PubMed, MEDLINE (Ovid), Science Direct, Scopus, and Web of Science. The systematic review and meta-analysis addressed the stability of BSSO CCW rotational advancement and the effect of the amount of CCW rotation on skeletal stability after BSSO advancement. Meta-analysis was performed only for studies reporting point B position in mm or mandibular plane angle in degrees before and after surgery and at follow-up. RESULTS: The database search resulted in 284 articles after removal of duplicates, and an additional 3 articles were included from hand searches of the bibliographies of the selected articles and relevant reviews. Eight studies were included in the systematic review; all were retrospective case series, and all used rigid fixation. Only 1 study was of medium quality; all other studies were of low quality. Meta-analysis of 3 studies revealed a mean forward movement of 7.6 mm at point B (95% confidence interval [CI], 4.07 to 11.4), a mean downward movement of 2.6 mm (95% CI, -0.66 to 5.84), and a mean CCW rotation of mandibular plane of 4.3° (95% CI, -6.34 to -2.19) during surgery. After surgery, point B showed a mean backward movement of -0.18 mm (95% CI, -1.30 to 1.14), a mean upward movement of -0.5 mm (95% CI, -3.00 to 1.98), and a mean clockwise rotation of 0.1° (95% CI, -1.76 to 1.91). CONCLUSIONS: Meta-analysis showed mandibular CCW rotational advancement is a stable procedure, both horizontally and vertically. However, the conclusions are far from robust due to the small sample size and poor quality of the reviewed studies.

Facial morphology in children and adolescents with juvenile idiopathic arthritis and moderate to severe temporomandibular joint involvement.

INTRODUCTION: The aims of this study were to (1) assess lateral facial morphology in children and adolescents with juvenile idiopathic arthritis and moderate to severe temporomandibular joint (TMJ) involvement, (2) compare the lateral facial morphology of these subjects with and without TMJ involvement using cephalograms and 3-dimensional (3D) facial photographs, and (3) compare and correlate the results of the 3D photographic and cephalometric analyses. METHODS: Sixty patients with juvenile idiopathic arthritis were included and grouped as follows: group 1, juvenile idiopathic arthritis patients without TMJ involvement; group 2, juvenile idiopathic arthritis patients with moderate to severe unilateral TMJ involvement; and group 3, juvenile idiopathic arthritis patients with moderate to severe bilateral TMJ involvement. Lateral cephalograms were used to assess and compare lateral facial morphologies between the groups. Lateral projections of oriented 3D photographs were superimposed on the lateral cephalograms. The results of the lateral 3D photographic analysis were correlated with those of lateral cephalometric analysis. RESULTS: Group 3 showed the most severe growth disturbances, including more retrognathic mandible and retruded chin, steep occlusal and mandibular planes, and more hyperdivergent type (P <0.01). Group 2 showed similar growth disturbances, but to a lesser extent than did group 3. Photographic variables were significantly correlated with the soft tissue and skeletal variables of cephalograms (0.5 < r < 0.9; P <0.001). CONCLUSIONS: Subjects with juvenile idiopathic arthritis and unilateral or bilateral moderate to severe TMJ involvement had significant growth disturbances. Early intervention is recommended for these patients to prevent unfavorable facial development. Furthermore, with proper orientation, 3D photographs can be used as an alternative to conventional lateral cephalograms and 2-dimensional photographs.

Changes in the upper airway and its surrounding structures after bimaxillary surgery in patients with cleft-related Class III deformity.

OBJECTIVES: To compare upper airway changes following bimaxillary surgery for correction of Class III deformity between patients with unilateral cleft lip and palate (UCLP) and bilateral cleft lip and palate (BCLP) and to compare the preoperative and postoperative upper airway among patients with UCLP and BCLP to healthy controls. MATERIALS AND METHODS: Sixty adults with CLP-related skeletal Class III deformity (30 UCLP and 30 BCLP) who consecutively underwent bimaxillary surgery were studied retrospectively. Cone-beam computed tomography (CBCT) was performed before and after surgery to measure upper airway and movements of facial skeletal and surrounding structures. CBCT images from 30 noncleft skeletal Class I adults, matched by age, gender, and body mass index and without surgical intervention, served as controls. RESULTS: After surgery, the volume of the nasopharynx increased in patients with CLP (both P < .001). Patients with CLP did not differ from controls in postoperative volume of the nasopharynx or oropharynx. However, the nasal cavity differed significantly between patients with CLP and controls (P < .001). CONCLUSIONS: After bimaxillary surgery, the nasal cavity of patients with CLP differed significantly compared with the controls. Volumes of the nasopharynx and oropharynx did not differ between patients with CLP after surgery and controls.

Predictors of poor dental arch relationship in young children with unilateral cleft lip and palate.

The aim of this cross-sectional outcome study using retrospective data capture of treatment histories was to examine the characteristics of young children with unilateral cleft lip and palate who had poor dental arch relationship (i.e., Goslon 5). The study sample comprised 120 children born with nonsyndromic complete unilateral cleft lip and palate between 1995 and 2003, and were aged between 5.0 and 7.0 years (mean age, 5.1 years) at the time of data collection. The dental arch relationship was assessed using the Goslon yardstick from intraoral dental photographs. An independent investigator recorded treatment histories from the clinical notes. The inter- and intraexaminer agreements evaluated by weighted kappa statistics were high. There was no association between dental arch relationship and the type of presurgical orthopedics or pharyngeal flap. Dental arch relationship was associated with the initial cleft size (odds ratio, OR = 1.3; 95% confidence interval, CI = 1.1-1.5, p < 0.01), surgeon grade for palate repair (OR = 5.0, 95% CI = 1.2-19.9, p < 0.05), and primary gingivoperiosteoplasty (OR = 2.8, 95% CI = 1.0-8.1, p = 0.05). These data suggest that intraoral dental photographs provide a reliable method for rating dental arch relationship. Wide initial cleft, high-volume surgeon, and primary gingivoperiosteoplasty are predictors of poor dental arch relationship outcome in young children with unilateral cleft lip and palate. These findings may improve treatment outcome by modifying the treatment protocol for patients with unilateral cleft lip and palate.

Airway Changes after Cleft Orthognathic Surgery Evaluated by Three-Dimensional Computed Tomography and Overnight Polysomnographic Study.

Cleft lip and palate is the most common congenital craniofacial anomaly. Up to 60% of these patients will benefit from cleft orthognathic surgery, which consists primarily of maxillary advancement and mandibular setback to address midface retrusion and relative mandibular protrusion, respectively. It is believed that maxillary advancement can enlarge the airway whilst mandibular setback can reduce the airway, but this has not previously been quantified for cleft patients undergoing orthognathic surgery. This unique longitudinal prospective study of 18 patients was conducted between April 2013 and July 2016. No significant changes occurred by six months postoperatively in body mass index, apnoea-hypopnoea index or lowest oxygen saturation (LSAT). There was a mean increase of 0.73 cm3 in velopharyngeal volume, a mean decrease of 0.79 cm3 in oropharyngeal volume, an improvement in snoring index, and no statistically significant change in hypopharyngeal volume. In conclusion, cleft orthognathic surgery that produced anterior advancement of the maxilla, setback of the mandible and clockwise rotation of the maxillo-mandibular complex resulted in increased velopharyngeal, decreased oropharyngeal and unchanged hypopharyngeal airways, and improved snoring, but did not significantly alter objective sleep-related breathing function.

Effect of bimaxillary rotational setback surgery on upper airway structure in skeletal class III deformities.

BACKGROUND: Upper airway narrowing has been a concern of mandibular setback. The aims of this study were (1) to evaluate the effect of bimaxillary rotational setback surgery on upper airway structure in patients with skeletal class III deformities, and (2) to compare the preoperative and postoperative upper airways of class III patients with age- and sex-matched class I control subjects. METHODS: The upper airways of 36 adults who consecutively underwent bimaxillary rotational setback surgery for skeletal class III deformities were assessed by means of cone-beam computed tomography before and at least 6 months after surgery. Results were compared with those of age- and sex-matched control subjects with skeletal class I structure. RESULTS: Before surgery, the class III patients had significantly larger velopharyngeal, oropharyngeal, and hypopharyngeal volumes than did the control subjects (all p < 0.01). The velopharyngeal, oropharyngeal, and hypopharynx volumes decreased significantly after surgery (all p < 0.01). The postoperative airways of class III patients were similar with regard to velopharyngeal, oropharyngeal, and hypopharyngeal volume (all p > 0.01) compared to control subjects. The postoperative velopharyngeal and oropharyngeal airway volumes were associated with the baseline airway volume (p < 0.001) and horizontal movement of the soft palate (p < 0.01). CONCLUSION: These results suggest that upper airway volume is decreased after bimaxillary rotational setback surgery for skeletal class III deformities, but is not smaller than in normal controls, and the postoperative upper airway volume is related to airway volume at baseline and changes in the surrounding structures. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Changes in the calibre of the upper airway and the surrounding structures after maxillomandibular advancement for obstructive sleep apnoea.

Maxillomandibular advancement (MMA) is effective in the treatment of obstructive sleep apnoea. We aimed to assess changes in the calibre of the upper airway, facial skeleton, and surrounding structural position after MMA and their association with improvement in symptoms. Sixteen consecutive adults with moderate-to-severe apnoea were treated by primary MMA. Polysomnography and computed tomography (CT) of the head and neck were done before and at least 6 months after MMA. The calibre of the upper airway, the facial skeleton, and the surrounding structures were measured with image analysis software. After MMA, patients had a significant reduction in their apnoea-hypopnoea index (31.2 (18.8)number of events (n)/hour (h)). The mean (SD) volume of the airway increased significantly in the velopharynx (p<0.01), oropharynx (p=0.001), and hypopharynx (p<0.001) (by 2.3 (2.4), 2.1 (2.6), and 1.7 (1.1)cm(3), respectively) and the length of the airway was significantly decreased (by 3.1 (3.5)mm p<0.01). The soft palate (p<0.001), tongue (p<0.001), and hyoid (p=0.001) moved significantly anteriorly (by 4.4 (2.0), 7.5 (2.8), and 5.7 (5.0)mm, respectively), and these movements were related to the MMA (r=0.6-0.8). The improvement in the apnoea-hypopnoea index was associated with both maxillary advancement and anterior movements of the soft palate and hyoid (r=0.6-0.7). The results of this study suggest that MMA increases the volume in the upper airway and reduces its length. Improvement in obstructive sleep apnoea is associated with the extent of the anterior movements of the maxilla, soft palate, and hyoid.

Comparison of two nasoalveolar molding techniques in unilateral complete cleft lip patients: a randomized, prospective, single-blind trial to compare nasal outcomes.

BACKGROUND: Nasoalveolar molding became increasingly popular in the 1990s as a means of easing surgery and improving nasal outcomes for cleft lip repairs. In the late 1990s, three orthodontists from our center underwent nasoalveolar molding training: two at the Rush Craniofacial Center, in Chicago; and one at New York University Craniofacial Center. They brought two different nasoalveolar molding techniques back to Chang Gung Craniofacial Center: the modified Figueroa and the modified Grayson techniques. Outcomes following use of these techniques have not previously been compared prospectively. METHODS: Between May of 2010 and March of 2013, a randomized, prospective, single-blind trial was conducted to compare the number of clinical visits, total costs, complications, and nasal symmetry between the two nasoalveolar molding techniques in 30 patients with unilateral complete cleft lip. RESULTS: There were no differences between nasoalveolar molding techniques in the number of clinical visits, total costs, nostril height, or nostril area ratio. Preoperatively but after nasoalveolar molding, the nostril width ratio was wider for the Figueroa group than for the Grayson group. Six months after surgical correction, there were no differences in nostril height, nostril width, nasal sill height, or nostril area ratio between nasoalveolar molding methods. Alveolar ulceration occurred more frequently in the Grayson group. CONCLUSIONS: The modified Grayson technique reduced nostril width more efficiently, but alveolar ulceration was more frequent and no differences in nostril width were found following surgery. Overall, the two nasoalveolar molding techniques produced similar nasal outcomes. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, II.

Effects of maxillomandibular advancement on the upper airway and surrounding structures in patients with obstructive sleep apnoea: a systematic review.

Obstructive sleep apnoea is ideally treated by continuous positive airway pressure, but other options are needed because its clinical effectiveness is limited by poor acceptance and tolerance, which results in suboptimal compliance. Patients often prefer operation, with maxillomandibular advancement (MMA) being the most effective approach. In this systematic review we have assessed its effects on the upper airway and surrounding structures in patients with obstructive sleep apnoea. After a structured search of electronic databases and hand searching, we retrieved 104 publications. After application of inclusion and exclusion criteria, 15 studies remained. From these we extracted data on study design, sample size, patients, methods and measurement, and outcomes. The quality of each study was assessed objectively. The heterogeneity of samples and outcome measures prevented a meta-analysis. MMA was shown to be an effective treatment of sleep apnoea. Primary and secondary MMA resulted in mean reductions in the apnoea-hypopnoea index/respiratory disturbance index of 61-92% and 82-92%, respectively. The operation not only enlarges the upper airway in the anteroposterior and lateral dimensions, but also raises the hyoid. Only 7 studies reported the relations between improvement in sleep apnoea and changes in the upper airway and surrounding structures, and only one correlated it with skeletal advancement. The studies were of low or medium quality. There were insufficient data to support a relation between improvement in sleep apnoea and changes in the upper airway and surrounding structures because of the contradictory results and poor quality of most studies.

Comparative outcomes of two nasoalveolar molding techniques for unilateral cleft nose deformity.

BACKGROUND: Nasoalveolar molding is increasingly being used to treat unilateral cleft nose deformity before primary repair. The Grayson technique starts nasal molding when an alveolar gap is reduced to 5 mm, whereas the Figueroa technique performs nasal and alveolar molding at the same time. The authors investigated the comparative efficacy, efficiency, and incidence of complications of the two techniques. METHODS: A blinded, retrospective study was conducted on 63 patients with complete unilateral cleft lip-cleft palate; 31 underwent the Grayson nasoalveolar molding and 32 underwent the Figueroa nasoalveolar molding. Pretreatment and posttreatment facial photographs and clinical charts were used to compare efficacy (nostril height ratio, nostril width ratio, columellar angle), efficiency (molding frequency), and incidence of complications (facial irritation, mucosal ulceration). RESULTS: The Grayson and Figueroa techniques did not differ in treatment efficacy for nostril height ratio (0.86 ± 0.09 versus 0.85 ± 0.09; p > 0.05) and columellar angle (84.0 ± 4.5 degrees versus 85.3 ± 2.6 degrees; p > 0.05). Although the Grayson technique was more effective for reducing nostril width ratio (1.21 ± 0.29 versus 1.27 ± 0.19, p = 0.05), it was less efficient (i.e., required more adjustments) (10.9 ± 2.5 versus 8.8 ± 1.9; p < 0.001) and had a higher incidence of mucosal ulceration (23 percent versus 3 percent; p < 0.05). CONCLUSIONS: The two nasoalveolar molding techniques differed in efficacy, efficiency, and incidence of complications in patients with complete unilateral cleft lip-cleft and palate. Understanding these differences may help surgeons and orthodontists improve outcome expectations and consultations with patients' families. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.